diff options
Diffstat (limited to 'arch/arm/mach-omap2/pm34xx.c')
| -rw-r--r-- | arch/arm/mach-omap2/pm34xx.c | 129 |
1 files changed, 31 insertions, 98 deletions
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index b88737fd6cf..75c0cd13ad8 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -32,13 +32,11 @@ #include <plat/sram.h> #include <plat/clockdomain.h> #include <plat/powerdomain.h> -#include <plat/control.h> #include <plat/serial.h> #include <plat/sdrc.h> #include <plat/prcm.h> #include <plat/gpmc.h> #include <plat/dma.h> -#include <plat/dmtimer.h> #include <asm/tlbflush.h> @@ -49,16 +47,12 @@ #include "prm.h" #include "pm.h" #include "sdrc.h" +#include "control.h" /* Scratchpad offsets */ -#define OMAP343X_TABLE_ADDRESS_OFFSET 0x31 -#define OMAP343X_TABLE_VALUE_OFFSET 0x30 -#define OMAP343X_CONTROL_REG_VALUE_OFFSET 0x32 - -u32 enable_off_mode; -u32 sleep_while_idle; -u32 wakeup_timer_seconds; -u32 wakeup_timer_milliseconds; +#define OMAP343X_TABLE_ADDRESS_OFFSET 0xc4 +#define OMAP343X_TABLE_VALUE_OFFSET 0xc0 +#define OMAP343X_CONTROL_REG_VALUE_OFFSET 0xc8 struct power_state { struct powerdomain *pwrdm; @@ -316,7 +310,7 @@ static void restore_control_register(u32 val) /* Function to restore the table entry that was modified for enabling MMU */ static void restore_table_entry(void) { - u32 *scratchpad_address; + void __iomem *scratchpad_address; u32 previous_value, control_reg_value; u32 *address; @@ -351,7 +345,6 @@ void omap_sram_idle(void) int core_next_state = PWRDM_POWER_ON; int core_prev_state, per_prev_state; u32 sdrc_pwr = 0; - int per_state_modified = 0; if (!_omap_sram_idle) return; @@ -385,8 +378,9 @@ void omap_sram_idle(void) /* Enable IO-PAD and IO-CHAIN wakeups */ per_next_state = pwrdm_read_next_pwrst(per_pwrdm); core_next_state = pwrdm_read_next_pwrst(core_pwrdm); - if (per_next_state < PWRDM_POWER_ON || - core_next_state < PWRDM_POWER_ON) { + if (omap3_has_io_wakeup() && + (per_next_state < PWRDM_POWER_ON || + core_next_state < PWRDM_POWER_ON)) { prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN); omap3_enable_io_chain(); } @@ -394,20 +388,12 @@ void omap_sram_idle(void) /* PER */ if (per_next_state < PWRDM_POWER_ON) { omap_uart_prepare_idle(2); + omap_uart_prepare_idle(3); omap2_gpio_prepare_for_idle(per_next_state); - if (per_next_state == PWRDM_POWER_OFF) { - if (core_next_state == PWRDM_POWER_ON) { - per_next_state = PWRDM_POWER_RET; - pwrdm_set_next_pwrst(per_pwrdm, per_next_state); - per_state_modified = 1; - } else + if (per_next_state == PWRDM_POWER_OFF) omap3_per_save_context(); - } } - if (pwrdm_read_pwrst(cam_pwrdm) == PWRDM_POWER_ON) - omap2_clkdm_deny_idle(mpu_pwrdm->pwrdm_clkdms[0]); - /* CORE */ if (core_next_state < PWRDM_POWER_ON) { omap_uart_prepare_idle(0); @@ -474,12 +460,13 @@ void omap_sram_idle(void) if (per_prev_state == PWRDM_POWER_OFF) omap3_per_restore_context(); omap_uart_resume_idle(2); - if (per_state_modified) - pwrdm_set_next_pwrst(per_pwrdm, PWRDM_POWER_OFF); + omap_uart_resume_idle(3); } /* Disable IO-PAD and IO-CHAIN wakeup */ - if (core_next_state < PWRDM_POWER_ON) { + if (omap3_has_io_wakeup() && + (per_next_state < PWRDM_POWER_ON || + core_next_state < PWRDM_POWER_ON)) { prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN); omap3_disable_io_chain(); } @@ -498,51 +485,6 @@ int omap3_can_sleep(void) return 1; } -/* This sets pwrdm state (other than mpu & core. Currently only ON & - * RET are supported. Function is assuming that clkdm doesn't have - * hw_sup mode enabled. */ -int set_pwrdm_state(struct powerdomain *pwrdm, u32 state) -{ - u32 cur_state; - int sleep_switch = 0; - int ret = 0; - - if (pwrdm == NULL || IS_ERR(pwrdm)) - return -EINVAL; - - while (!(pwrdm->pwrsts & (1 << state))) { - if (state == PWRDM_POWER_OFF) - return ret; - state--; - } - - cur_state = pwrdm_read_next_pwrst(pwrdm); - if (cur_state == state) - return ret; - - if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) { - omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]); - sleep_switch = 1; - pwrdm_wait_transition(pwrdm); - } - - ret = pwrdm_set_next_pwrst(pwrdm, state); - if (ret) { - printk(KERN_ERR "Unable to set state of powerdomain: %s\n", - pwrdm->name); - goto err; - } - - if (sleep_switch) { - omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]); - pwrdm_wait_transition(pwrdm); - pwrdm_state_switch(pwrdm); - } - -err: - return ret; -} - static void omap3_pm_idle(void) { local_irq_disable(); @@ -564,23 +506,6 @@ out: #ifdef CONFIG_SUSPEND static suspend_state_t suspend_state; -static void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds) -{ - u32 tick_rate, cycles; - - if (!seconds && !milliseconds) - return; - - tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup)); - cycles = tick_rate * seconds + tick_rate * milliseconds / 1000; - omap_dm_timer_stop(gptimer_wakeup); - omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles); - - pr_info("PM: Resume timer in %u.%03u secs" - " (%d ticks at %d ticks/sec.)\n", - seconds, milliseconds, cycles, tick_rate); -} - static int omap3_pm_prepare(void) { disable_hlt(); @@ -601,7 +526,7 @@ static int omap3_pm_suspend(void) pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm); /* Set ones wanted by suspend */ list_for_each_entry(pwrst, &pwrst_list, node) { - if (set_pwrdm_state(pwrst->pwrdm, pwrst->next_state)) + if (omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state)) goto restore; if (pwrdm_clear_all_prev_pwrst(pwrst->pwrdm)) goto restore; @@ -622,7 +547,7 @@ restore: pwrst->pwrdm->name, pwrst->next_state); ret = -1; } - set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); + omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); } if (ret) printk(KERN_ERR "Could not enter target state in pm_suspend\n"); @@ -753,6 +678,14 @@ static void __init omap3_d2d_idle(void) static void __init prcm_setup_regs(void) { + u32 omap3630_auto_uart4_mask = cpu_is_omap3630() ? + OMAP3630_AUTO_UART4_MASK : 0; + u32 omap3630_en_uart4_mask = cpu_is_omap3630() ? + OMAP3630_EN_UART4_MASK : 0; + u32 omap3630_grpsel_uart4_mask = cpu_is_omap3630() ? + OMAP3630_GRPSEL_UART4_MASK : 0; + + /* XXX Reset all wkdeps. This should be done when initializing * powerdomains */ prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP); @@ -839,6 +772,7 @@ static void __init prcm_setup_regs(void) CM_AUTOIDLE); cm_write_mod_reg( + omap3630_auto_uart4_mask | OMAP3430_AUTO_GPIO6_MASK | OMAP3430_AUTO_GPIO5_MASK | OMAP3430_AUTO_GPIO4_MASK | @@ -915,14 +849,16 @@ static void __init prcm_setup_regs(void) OMAP3430_DSS_MOD, PM_WKEN); /* Enable wakeups in PER */ - prm_write_mod_reg(OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK | + prm_write_mod_reg(omap3630_en_uart4_mask | + OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK | OMAP3430_EN_GPIO4_MASK | OMAP3430_EN_GPIO5_MASK | OMAP3430_EN_GPIO6_MASK | OMAP3430_EN_UART3_MASK | OMAP3430_EN_MCBSP2_MASK | OMAP3430_EN_MCBSP3_MASK | OMAP3430_EN_MCBSP4_MASK, OMAP3430_PER_MOD, PM_WKEN); /* and allow them to wake up MPU */ - prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2_MASK | + prm_write_mod_reg(omap3630_grpsel_uart4_mask | + OMAP3430_GRPSEL_GPIO2_MASK | OMAP3430_GRPSEL_GPIO3_MASK | OMAP3430_GRPSEL_GPIO4_MASK | OMAP3430_GRPSEL_GPIO5_MASK | @@ -971,7 +907,7 @@ void omap3_pm_off_mode_enable(int enable) list_for_each_entry(pwrst, &pwrst_list, node) { pwrst->next_state = state; - set_pwrdm_state(pwrst->pwrdm, state); + omap_set_pwrdm_state(pwrst->pwrdm, state); } } @@ -1016,7 +952,7 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) if (pwrdm_has_hdwr_sar(pwrdm)) pwrdm_enable_hdwr_sar(pwrdm); - return set_pwrdm_state(pwrst->pwrdm, pwrst->next_state); + return omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state); } /* @@ -1026,9 +962,6 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) */ static int __init clkdms_setup(struct clockdomain *clkdm, void *unused) { - clkdm_clear_all_wkdeps(clkdm); - clkdm_clear_all_sleepdeps(clkdm); - if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO) omap2_clkdm_allow_idle(clkdm); else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP && |