aboutsummaryrefslogtreecommitdiff
path: root/arch/alpha/lib/ev6-divide.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/alpha/lib/ev6-divide.S')
-rw-r--r--arch/alpha/lib/ev6-divide.S259
1 files changed, 259 insertions, 0 deletions
diff --git a/arch/alpha/lib/ev6-divide.S b/arch/alpha/lib/ev6-divide.S
new file mode 100644
index 00000000000..2a82b9be93f
--- /dev/null
+++ b/arch/alpha/lib/ev6-divide.S
@@ -0,0 +1,259 @@
+/*
+ * arch/alpha/lib/ev6-divide.S
+ *
+ * 21264 version contributed by Rick Gorton <rick.gorton@alpha-processor.com>
+ *
+ * Alpha division..
+ */
+
+/*
+ * The alpha chip doesn't provide hardware division, so we have to do it
+ * by hand. The compiler expects the functions
+ *
+ * __divqu: 64-bit unsigned long divide
+ * __remqu: 64-bit unsigned long remainder
+ * __divqs/__remqs: signed 64-bit
+ * __divlu/__remlu: unsigned 32-bit
+ * __divls/__remls: signed 32-bit
+ *
+ * These are not normal C functions: instead of the normal
+ * calling sequence, these expect their arguments in registers
+ * $24 and $25, and return the result in $27. Register $28 may
+ * be clobbered (assembly temporary), anything else must be saved.
+ *
+ * In short: painful.
+ *
+ * This is a rather simple bit-at-a-time algorithm: it's very good
+ * at dividing random 64-bit numbers, but the more usual case where
+ * the divisor is small is handled better by the DEC algorithm
+ * using lookup tables. This uses much less memory, though, and is
+ * nicer on the cache.. Besides, I don't know the copyright status
+ * of the DEC code.
+ */
+
+/*
+ * My temporaries:
+ * $0 - current bit
+ * $1 - shifted divisor
+ * $2 - modulus/quotient
+ *
+ * $23 - return address
+ * $24 - dividend
+ * $25 - divisor
+ *
+ * $27 - quotient/modulus
+ * $28 - compare status
+ *
+ * Much of the information about 21264 scheduling/coding comes from:
+ * Compiler Writer's Guide for the Alpha 21264
+ * abbreviated as 'CWG' in other comments here
+ * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html
+ * Scheduling notation:
+ * E - either cluster
+ * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1
+ * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1
+ * Try not to change the actual algorithm if possible for consistency.
+ */
+
+#define halt .long 0
+
+/*
+ * Select function type and registers
+ */
+#define mask $0
+#define divisor $1
+#define compare $28
+#define tmp1 $3
+#define tmp2 $4
+
+#ifdef DIV
+#define DIV_ONLY(x,y...) x,##y
+#define MOD_ONLY(x,y...)
+#define func(x) __div##x
+#define modulus $2
+#define quotient $27
+#define GETSIGN(x) xor $24,$25,x
+#define STACK 48
+#else
+#define DIV_ONLY(x,y...)
+#define MOD_ONLY(x,y...) x,##y
+#define func(x) __rem##x
+#define modulus $27
+#define quotient $2
+#define GETSIGN(x) bis $24,$24,x
+#define STACK 32
+#endif
+
+/*
+ * For 32-bit operations, we need to extend to 64-bit
+ */
+#ifdef INTSIZE
+#define ufunction func(lu)
+#define sfunction func(l)
+#define LONGIFY(x) zapnot x,15,x
+#define SLONGIFY(x) addl x,0,x
+#else
+#define ufunction func(qu)
+#define sfunction func(q)
+#define LONGIFY(x)
+#define SLONGIFY(x)
+#endif
+
+.set noat
+.align 4
+.globl ufunction
+.ent ufunction
+ufunction:
+ subq $30,STACK,$30 # E :
+ .frame $30,STACK,$23
+ .prologue 0
+
+7: stq $1, 0($30) # L :
+ bis $25,$25,divisor # E :
+ stq $2, 8($30) # L : L U L U
+
+ bis $24,$24,modulus # E :
+ stq $0,16($30) # L :
+ bis $31,$31,quotient # E :
+ LONGIFY(divisor) # E : U L L U
+
+ stq tmp1,24($30) # L :
+ LONGIFY(modulus) # E :
+ bis $31,1,mask # E :
+ DIV_ONLY(stq tmp2,32($30)) # L : L U U L
+
+ beq divisor, 9f /* div by zero */
+ /*
+ * In spite of the DIV_ONLY being either a non-instruction
+ * or an actual stq, the addition of the .align directive
+ * below ensures that label 1 is going to be nicely aligned
+ */
+
+ .align 4
+#ifdef INTSIZE
+ /*
+ * shift divisor left, using 3-bit shifts for
+ * 32-bit divides as we can't overflow. Three-bit
+ * shifts will result in looping three times less
+ * here, but can result in two loops more later.
+ * Thus using a large shift isn't worth it (and
+ * s8add pairs better than a sll..)
+ */
+1: cmpult divisor,modulus,compare # E :
+ s8addq divisor,$31,divisor # E :
+ s8addq mask,$31,mask # E :
+ bne compare,1b # U : U L U L
+#else
+1: cmpult divisor,modulus,compare # E :
+ nop # E :
+ nop # E :
+ blt divisor, 2f # U : U L U L
+
+ addq divisor,divisor,divisor # E :
+ addq mask,mask,mask # E :
+ unop # E :
+ bne compare,1b # U : U L U L
+#endif
+
+ /* ok, start to go right again.. */
+2:
+ /*
+ * Keep things nicely bundled... use a nop instead of not
+ * having an instruction for DIV_ONLY
+ */
+#ifdef DIV
+ DIV_ONLY(addq quotient,mask,tmp2) # E :
+#else
+ nop # E :
+#endif
+ srl mask,1,mask # U :
+ cmpule divisor,modulus,compare # E :
+ subq modulus,divisor,tmp1 # E :
+
+#ifdef DIV
+ DIV_ONLY(cmovne compare,tmp2,quotient) # E : Latency 2, extra map slot
+ nop # E : as part of the cmovne
+ srl divisor,1,divisor # U :
+ nop # E : L U L U
+
+ nop # E :
+ cmovne compare,tmp1,modulus # E : Latency 2, extra map slot
+ nop # E : as part of the cmovne
+ bne mask,2b # U : U L U L
+#else
+ srl divisor,1,divisor # U :
+ cmovne compare,tmp1,modulus # E : Latency 2, extra map slot
+ nop # E : as part of the cmovne
+ bne mask,2b # U : U L L U
+#endif
+
+9: ldq $1, 0($30) # L :
+ ldq $2, 8($30) # L :
+ nop # E :
+ nop # E : U U L L
+
+ ldq $0,16($30) # L :
+ ldq tmp1,24($30) # L :
+ nop # E :
+ nop # E :
+
+#ifdef DIV
+ DIV_ONLY(ldq tmp2,32($30)) # L :
+#else
+ nop # E :
+#endif
+ addq $30,STACK,$30 # E :
+ ret $31,($23),1 # L0 : L U U L
+ .end ufunction
+
+/*
+ * Uhh.. Ugly signed division. I'd rather not have it at all, but
+ * it's needed in some circumstances. There are different ways to
+ * handle this, really. This does:
+ * -a / b = a / -b = -(a / b)
+ * -a % b = -(a % b)
+ * a % -b = a % b
+ * which is probably not the best solution, but at least should
+ * have the property that (x/y)*y + (x%y) = x.
+ */
+.align 4
+.globl sfunction
+.ent sfunction
+sfunction:
+ subq $30,STACK,$30 # E :
+ .frame $30,STACK,$23
+ .prologue 0
+ bis $24,$25,$28 # E :
+ SLONGIFY($28) # E :
+ bge $28,7b # U :
+
+ stq $24,0($30) # L :
+ subq $31,$24,$28 # E :
+ stq $25,8($30) # L :
+ nop # E : U L U L
+
+ cmovlt $24,$28,$24 /* abs($24) */ # E : Latency 2, extra map slot
+ nop # E : as part of the cmov
+ stq $23,16($30) # L :
+ subq $31,$25,$28 # E : U L U L
+
+ stq tmp1,24($30) # L :
+ cmovlt $25,$28,$25 /* abs($25) */ # E : Latency 2, extra map slot
+ nop # E :
+ bsr $23,ufunction # L0: L U L U
+
+ ldq $24,0($30) # L :
+ ldq $25,8($30) # L :
+ GETSIGN($28) # E :
+ subq $31,$27,tmp1 # E : U U L L
+
+ SLONGIFY($28) # E :
+ ldq $23,16($30) # L :
+ cmovlt $28,tmp1,$27 # E : Latency 2, extra map slot
+ nop # E : U L L U : as part of the cmov
+
+ ldq tmp1,24($30) # L :
+ nop # E : as part of the cmov
+ addq $30,STACK,$30 # E :
+ ret $31,($23),1 # L0 : L U U L
+ .end sfunction