aboutsummaryrefslogtreecommitdiff
path: root/arch/alpha/kernel/core_t2.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/alpha/kernel/core_t2.c')
-rw-r--r--arch/alpha/kernel/core_t2.c622
1 files changed, 622 insertions, 0 deletions
diff --git a/arch/alpha/kernel/core_t2.c b/arch/alpha/kernel/core_t2.c
new file mode 100644
index 00000000000..ecce09e3626
--- /dev/null
+++ b/arch/alpha/kernel/core_t2.c
@@ -0,0 +1,622 @@
+/*
+ * linux/arch/alpha/kernel/core_t2.c
+ *
+ * Written by Jay A Estabrook (jestabro@amt.tay1.dec.com).
+ * December 1996.
+ *
+ * based on CIA code by David A Rusling (david.rusling@reo.mts.dec.com)
+ *
+ * Code common to all T2 core logic chips.
+ */
+
+#define __EXTERN_INLINE
+#include <asm/io.h>
+#include <asm/core_t2.h>
+#undef __EXTERN_INLINE
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+
+#include <asm/ptrace.h>
+#include <asm/delay.h>
+
+#include "proto.h"
+#include "pci_impl.h"
+
+/* For dumping initial DMA window settings. */
+#define DEBUG_PRINT_INITIAL_SETTINGS 0
+
+/* For dumping final DMA window settings. */
+#define DEBUG_PRINT_FINAL_SETTINGS 0
+
+/*
+ * By default, we direct-map starting at 2GB, in order to allow the
+ * maximum size direct-map window (2GB) to match the maximum amount of
+ * memory (2GB) that can be present on SABLEs. But that limits the
+ * floppy to DMA only via the scatter/gather window set up for 8MB
+ * ISA DMA, since the maximum ISA DMA address is 2GB-1.
+ *
+ * For now, this seems a reasonable trade-off: even though most SABLEs
+ * have less than 1GB of memory, floppy usage/performance will not
+ * really be affected by forcing it to go via scatter/gather...
+ */
+#define T2_DIRECTMAP_2G 1
+
+#if T2_DIRECTMAP_2G
+# define T2_DIRECTMAP_START 0x80000000UL
+# define T2_DIRECTMAP_LENGTH 0x80000000UL
+#else
+# define T2_DIRECTMAP_START 0x40000000UL
+# define T2_DIRECTMAP_LENGTH 0x40000000UL
+#endif
+
+/* The ISA scatter/gather window settings. */
+#define T2_ISA_SG_START 0x00800000UL
+#define T2_ISA_SG_LENGTH 0x00800000UL
+
+/*
+ * NOTE: Herein lie back-to-back mb instructions. They are magic.
+ * One plausible explanation is that the i/o controller does not properly
+ * handle the system transaction. Another involves timing. Ho hum.
+ */
+
+/*
+ * BIOS32-style PCI interface:
+ */
+
+#define DEBUG_CONFIG 0
+
+#if DEBUG_CONFIG
+# define DBG(args) printk args
+#else
+# define DBG(args)
+#endif
+
+static volatile unsigned int t2_mcheck_any_expected;
+static volatile unsigned int t2_mcheck_last_taken;
+
+/* Place to save the DMA Window registers as set up by SRM
+ for restoration during shutdown. */
+static struct
+{
+ struct {
+ unsigned long wbase;
+ unsigned long wmask;
+ unsigned long tbase;
+ } window[2];
+ unsigned long hae_1;
+ unsigned long hae_2;
+ unsigned long hae_3;
+ unsigned long hae_4;
+ unsigned long hbase;
+} t2_saved_config __attribute((common));
+
+/*
+ * Given a bus, device, and function number, compute resulting
+ * configuration space address and setup the T2_HAXR2 register
+ * accordingly. It is therefore not safe to have concurrent
+ * invocations to configuration space access routines, but there
+ * really shouldn't be any need for this.
+ *
+ * Type 0:
+ *
+ * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
+ * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0|
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ * 31:11 Device select bit.
+ * 10:8 Function number
+ * 7:2 Register number
+ *
+ * Type 1:
+ *
+ * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
+ * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ * 31:24 reserved
+ * 23:16 bus number (8 bits = 128 possible buses)
+ * 15:11 Device number (5 bits)
+ * 10:8 function number
+ * 7:2 register number
+ *
+ * Notes:
+ * The function number selects which function of a multi-function device
+ * (e.g., SCSI and Ethernet).
+ *
+ * The register selects a DWORD (32 bit) register offset. Hence it
+ * doesn't get shifted by 2 bits as we want to "drop" the bottom two
+ * bits.
+ */
+
+static int
+mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
+ unsigned long *pci_addr, unsigned char *type1)
+{
+ unsigned long addr;
+ u8 bus = pbus->number;
+
+ DBG(("mk_conf_addr(bus=%d, dfn=0x%x, where=0x%x,"
+ " addr=0x%lx, type1=0x%x)\n",
+ bus, device_fn, where, pci_addr, type1));
+
+ if (bus == 0) {
+ int device = device_fn >> 3;
+
+ /* Type 0 configuration cycle. */
+
+ if (device > 8) {
+ DBG(("mk_conf_addr: device (%d)>20, returning -1\n",
+ device));
+ return -1;
+ }
+
+ *type1 = 0;
+ addr = (0x0800L << device) | ((device_fn & 7) << 8) | (where);
+ } else {
+ /* Type 1 configuration cycle. */
+ *type1 = 1;
+ addr = (bus << 16) | (device_fn << 8) | (where);
+ }
+ *pci_addr = addr;
+ DBG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
+ return 0;
+}
+
+/*
+ * NOTE: both conf_read() and conf_write() may set HAE_3 when needing
+ * to do type1 access. This is protected by the use of spinlock IRQ
+ * primitives in the wrapper functions pci_{read,write}_config_*()
+ * defined in drivers/pci/pci.c.
+ */
+static unsigned int
+conf_read(unsigned long addr, unsigned char type1)
+{
+ unsigned int value, cpu, taken;
+ unsigned long t2_cfg = 0;
+
+ cpu = smp_processor_id();
+
+ DBG(("conf_read(addr=0x%lx, type1=%d)\n", addr, type1));
+
+ /* If Type1 access, must set T2 CFG. */
+ if (type1) {
+ t2_cfg = *(vulp)T2_HAE_3 & ~0xc0000000UL;
+ *(vulp)T2_HAE_3 = 0x40000000UL | t2_cfg;
+ mb();
+ }
+ mb();
+ draina();
+
+ mcheck_expected(cpu) = 1;
+ mcheck_taken(cpu) = 0;
+ t2_mcheck_any_expected |= (1 << cpu);
+ mb();
+
+ /* Access configuration space. */
+ value = *(vuip)addr;
+ mb();
+ mb(); /* magic */
+
+ /* Wait for possible mcheck. Also, this lets other CPUs clear
+ their mchecks as well, as they can reliably tell when
+ another CPU is in the midst of handling a real mcheck via
+ the "taken" function. */
+ udelay(100);
+
+ if ((taken = mcheck_taken(cpu))) {
+ mcheck_taken(cpu) = 0;
+ t2_mcheck_last_taken |= (1 << cpu);
+ value = 0xffffffffU;
+ mb();
+ }
+ mcheck_expected(cpu) = 0;
+ t2_mcheck_any_expected = 0;
+ mb();
+
+ /* If Type1 access, must reset T2 CFG so normal IO space ops work. */
+ if (type1) {
+ *(vulp)T2_HAE_3 = t2_cfg;
+ mb();
+ }
+
+ return value;
+}
+
+static void
+conf_write(unsigned long addr, unsigned int value, unsigned char type1)
+{
+ unsigned int cpu, taken;
+ unsigned long t2_cfg = 0;
+
+ cpu = smp_processor_id();
+
+ /* If Type1 access, must set T2 CFG. */
+ if (type1) {
+ t2_cfg = *(vulp)T2_HAE_3 & ~0xc0000000UL;
+ *(vulp)T2_HAE_3 = t2_cfg | 0x40000000UL;
+ mb();
+ }
+ mb();
+ draina();
+
+ mcheck_expected(cpu) = 1;
+ mcheck_taken(cpu) = 0;
+ t2_mcheck_any_expected |= (1 << cpu);
+ mb();
+
+ /* Access configuration space. */
+ *(vuip)addr = value;
+ mb();
+ mb(); /* magic */
+
+ /* Wait for possible mcheck. Also, this lets other CPUs clear
+ their mchecks as well, as they can reliably tell when
+ this CPU is in the midst of handling a real mcheck via
+ the "taken" function. */
+ udelay(100);
+
+ if ((taken = mcheck_taken(cpu))) {
+ mcheck_taken(cpu) = 0;
+ t2_mcheck_last_taken |= (1 << cpu);
+ mb();
+ }
+ mcheck_expected(cpu) = 0;
+ t2_mcheck_any_expected = 0;
+ mb();
+
+ /* If Type1 access, must reset T2 CFG so normal IO space ops work. */
+ if (type1) {
+ *(vulp)T2_HAE_3 = t2_cfg;
+ mb();
+ }
+}
+
+static int
+t2_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 *value)
+{
+ unsigned long addr, pci_addr;
+ unsigned char type1;
+ int shift;
+ long mask;
+
+ if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ mask = (size - 1) * 8;
+ shift = (where & 3) * 8;
+ addr = (pci_addr << 5) + mask + T2_CONF;
+ *value = conf_read(addr, type1) >> (shift);
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+t2_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
+ u32 value)
+{
+ unsigned long addr, pci_addr;
+ unsigned char type1;
+ long mask;
+
+ if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ mask = (size - 1) * 8;
+ addr = (pci_addr << 5) + mask + T2_CONF;
+ conf_write(addr, value << ((where & 3) * 8), type1);
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops t2_pci_ops =
+{
+ .read = t2_read_config,
+ .write = t2_write_config,
+};
+
+static void __init
+t2_direct_map_window1(unsigned long base, unsigned long length)
+{
+ unsigned long temp;
+
+ __direct_map_base = base;
+ __direct_map_size = length;
+
+ temp = (base & 0xfff00000UL) | ((base + length - 1) >> 20);
+ *(vulp)T2_WBASE1 = temp | 0x80000UL; /* OR in ENABLE bit */
+ temp = (length - 1) & 0xfff00000UL;
+ *(vulp)T2_WMASK1 = temp;
+ *(vulp)T2_TBASE1 = 0;
+
+#if DEBUG_PRINT_FINAL_SETTINGS
+ printk("%s: setting WBASE1=0x%lx WMASK1=0x%lx TBASE1=0x%lx\n",
+ __FUNCTION__,
+ *(vulp)T2_WBASE1,
+ *(vulp)T2_WMASK1,
+ *(vulp)T2_TBASE1);
+#endif
+}
+
+static void __init
+t2_sg_map_window2(struct pci_controller *hose,
+ unsigned long base,
+ unsigned long length)
+{
+ unsigned long temp;
+
+ /* Note we can only do 1 SG window, as the other is for direct, so
+ do an ISA SG area, especially for the floppy. */
+ hose->sg_isa = iommu_arena_new(hose, base, length, 0);
+ hose->sg_pci = NULL;
+
+ temp = (base & 0xfff00000UL) | ((base + length - 1) >> 20);
+ *(vulp)T2_WBASE2 = temp | 0xc0000UL; /* OR in ENABLE/SG bits */
+ temp = (length - 1) & 0xfff00000UL;
+ *(vulp)T2_WMASK2 = temp;
+ *(vulp)T2_TBASE2 = virt_to_phys(hose->sg_isa->ptes) >> 1;
+ mb();
+
+ t2_pci_tbi(hose, 0, -1); /* flush TLB all */
+
+#if DEBUG_PRINT_FINAL_SETTINGS
+ printk("%s: setting WBASE2=0x%lx WMASK2=0x%lx TBASE2=0x%lx\n",
+ __FUNCTION__,
+ *(vulp)T2_WBASE2,
+ *(vulp)T2_WMASK2,
+ *(vulp)T2_TBASE2);
+#endif
+}
+
+static void __init
+t2_save_configuration(void)
+{
+#if DEBUG_PRINT_INITIAL_SETTINGS
+ printk("%s: HAE_1 was 0x%lx\n", __FUNCTION__, srm_hae); /* HW is 0 */
+ printk("%s: HAE_2 was 0x%lx\n", __FUNCTION__, *(vulp)T2_HAE_2);
+ printk("%s: HAE_3 was 0x%lx\n", __FUNCTION__, *(vulp)T2_HAE_3);
+ printk("%s: HAE_4 was 0x%lx\n", __FUNCTION__, *(vulp)T2_HAE_4);
+ printk("%s: HBASE was 0x%lx\n", __FUNCTION__, *(vulp)T2_HBASE);
+
+ printk("%s: WBASE1=0x%lx WMASK1=0x%lx TBASE1=0x%lx\n", __FUNCTION__,
+ *(vulp)T2_WBASE1, *(vulp)T2_WMASK1, *(vulp)T2_TBASE1);
+ printk("%s: WBASE2=0x%lx WMASK2=0x%lx TBASE2=0x%lx\n", __FUNCTION__,
+ *(vulp)T2_WBASE2, *(vulp)T2_WMASK2, *(vulp)T2_TBASE2);
+#endif
+
+ /*
+ * Save the DMA Window registers.
+ */
+ t2_saved_config.window[0].wbase = *(vulp)T2_WBASE1;
+ t2_saved_config.window[0].wmask = *(vulp)T2_WMASK1;
+ t2_saved_config.window[0].tbase = *(vulp)T2_TBASE1;
+ t2_saved_config.window[1].wbase = *(vulp)T2_WBASE2;
+ t2_saved_config.window[1].wmask = *(vulp)T2_WMASK2;
+ t2_saved_config.window[1].tbase = *(vulp)T2_TBASE2;
+
+ t2_saved_config.hae_1 = srm_hae; /* HW is already set to 0 */
+ t2_saved_config.hae_2 = *(vulp)T2_HAE_2;
+ t2_saved_config.hae_3 = *(vulp)T2_HAE_3;
+ t2_saved_config.hae_4 = *(vulp)T2_HAE_4;
+ t2_saved_config.hbase = *(vulp)T2_HBASE;
+}
+
+void __init
+t2_init_arch(void)
+{
+ struct pci_controller *hose;
+ unsigned long temp;
+ unsigned int i;
+
+ for (i = 0; i < NR_CPUS; i++) {
+ mcheck_expected(i) = 0;
+ mcheck_taken(i) = 0;
+ }
+ t2_mcheck_any_expected = 0;
+ t2_mcheck_last_taken = 0;
+
+ /* Enable scatter/gather TLB use. */
+ temp = *(vulp)T2_IOCSR;
+ if (!(temp & (0x1UL << 26))) {
+ printk("t2_init_arch: enabling SG TLB, IOCSR was 0x%lx\n",
+ temp);
+ *(vulp)T2_IOCSR = temp | (0x1UL << 26);
+ mb();
+ *(vulp)T2_IOCSR; /* read it back to make sure */
+ }
+
+ t2_save_configuration();
+
+ /*
+ * Create our single hose.
+ */
+ pci_isa_hose = hose = alloc_pci_controller();
+ hose->io_space = &ioport_resource;
+ hose->mem_space = &iomem_resource;
+ hose->index = 0;
+
+ hose->sparse_mem_base = T2_SPARSE_MEM - IDENT_ADDR;
+ hose->dense_mem_base = T2_DENSE_MEM - IDENT_ADDR;
+ hose->sparse_io_base = T2_IO - IDENT_ADDR;
+ hose->dense_io_base = 0;
+
+ /*
+ * Set up the PCI->physical memory translation windows.
+ *
+ * Window 1 is direct mapped.
+ * Window 2 is scatter/gather (for ISA).
+ */
+
+ t2_direct_map_window1(T2_DIRECTMAP_START, T2_DIRECTMAP_LENGTH);
+
+ /* Always make an ISA DMA window. */
+ t2_sg_map_window2(hose, T2_ISA_SG_START, T2_ISA_SG_LENGTH);
+
+ *(vulp)T2_HBASE = 0x0; /* Disable HOLES. */
+
+ /* Zero HAE. */
+ *(vulp)T2_HAE_1 = 0; mb(); /* Sparse MEM HAE */
+ *(vulp)T2_HAE_2 = 0; mb(); /* Sparse I/O HAE */
+ *(vulp)T2_HAE_3 = 0; mb(); /* Config Space HAE */
+
+ /*
+ * We also now zero out HAE_4, the dense memory HAE, so that
+ * we need not account for its "offset" when accessing dense
+ * memory resources which we allocated in our normal way. This
+ * HAE would need to stay untouched were we to keep the SRM
+ * resource settings.
+ *
+ * Thus we can now run standard X servers on SABLE/LYNX. :-)
+ */
+ *(vulp)T2_HAE_4 = 0; mb();
+}
+
+void
+t2_kill_arch(int mode)
+{
+ /*
+ * Restore the DMA Window registers.
+ */
+ *(vulp)T2_WBASE1 = t2_saved_config.window[0].wbase;
+ *(vulp)T2_WMASK1 = t2_saved_config.window[0].wmask;
+ *(vulp)T2_TBASE1 = t2_saved_config.window[0].tbase;
+ *(vulp)T2_WBASE2 = t2_saved_config.window[1].wbase;
+ *(vulp)T2_WMASK2 = t2_saved_config.window[1].wmask;
+ *(vulp)T2_TBASE2 = t2_saved_config.window[1].tbase;
+ mb();
+
+ *(vulp)T2_HAE_1 = srm_hae;
+ *(vulp)T2_HAE_2 = t2_saved_config.hae_2;
+ *(vulp)T2_HAE_3 = t2_saved_config.hae_3;
+ *(vulp)T2_HAE_4 = t2_saved_config.hae_4;
+ *(vulp)T2_HBASE = t2_saved_config.hbase;
+ mb();
+ *(vulp)T2_HBASE; /* READ it back to ensure WRITE occurred. */
+}
+
+void
+t2_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
+{
+ unsigned long t2_iocsr;
+
+ t2_iocsr = *(vulp)T2_IOCSR;
+
+ /* set the TLB Clear bit */
+ *(vulp)T2_IOCSR = t2_iocsr | (0x1UL << 28);
+ mb();
+ *(vulp)T2_IOCSR; /* read it back to make sure */
+
+ /* clear the TLB Clear bit */
+ *(vulp)T2_IOCSR = t2_iocsr & ~(0x1UL << 28);
+ mb();
+ *(vulp)T2_IOCSR; /* read it back to make sure */
+}
+
+#define SIC_SEIC (1UL << 33) /* System Event Clear */
+
+static void
+t2_clear_errors(int cpu)
+{
+ struct sable_cpu_csr *cpu_regs;
+
+ cpu_regs = (struct sable_cpu_csr *)T2_CPUn_BASE(cpu);
+
+ cpu_regs->sic &= ~SIC_SEIC;
+
+ /* Clear CPU errors. */
+ cpu_regs->bcce |= cpu_regs->bcce;
+ cpu_regs->cbe |= cpu_regs->cbe;
+ cpu_regs->bcue |= cpu_regs->bcue;
+ cpu_regs->dter |= cpu_regs->dter;
+
+ *(vulp)T2_CERR1 |= *(vulp)T2_CERR1;
+ *(vulp)T2_PERR1 |= *(vulp)T2_PERR1;
+
+ mb();
+ mb(); /* magic */
+}
+
+/*
+ * SABLE seems to have a "broadcast" style machine check, in that all
+ * CPUs receive it. And, the issuing CPU, in the case of PCI Config
+ * space read/write faults, will also receive a second mcheck, upon
+ * lowering IPL during completion processing in pci_read_config_byte()
+ * et al.
+ *
+ * Hence all the taken/expected/any_expected/last_taken stuff...
+ */
+void
+t2_machine_check(unsigned long vector, unsigned long la_ptr,
+ struct pt_regs * regs)
+{
+ int cpu = smp_processor_id();
+#ifdef CONFIG_VERBOSE_MCHECK
+ struct el_common *mchk_header = (struct el_common *)la_ptr;
+#endif
+
+ /* Clear the error before any reporting. */
+ mb();
+ mb(); /* magic */
+ draina();
+ t2_clear_errors(cpu);
+
+ /* This should not actually be done until the logout frame is
+ examined, but, since we don't do that, go on and do this... */
+ wrmces(0x7);
+ mb();
+
+ /* Now, do testing for the anomalous conditions. */
+ if (!mcheck_expected(cpu) && t2_mcheck_any_expected) {
+ /*
+ * FUNKY: Received mcheck on a CPU and not
+ * expecting it, but another CPU is expecting one.
+ *
+ * Just dismiss it for now on this CPU...
+ */
+#ifdef CONFIG_VERBOSE_MCHECK
+ if (alpha_verbose_mcheck > 1) {
+ printk("t2_machine_check(cpu%d): any_expected 0x%x -"
+ " (assumed) spurious -"
+ " code 0x%x\n", cpu, t2_mcheck_any_expected,
+ (unsigned int)mchk_header->code);
+ }
+#endif
+ return;
+ }
+
+ if (!mcheck_expected(cpu) && !t2_mcheck_any_expected) {
+ if (t2_mcheck_last_taken & (1 << cpu)) {
+#ifdef CONFIG_VERBOSE_MCHECK
+ if (alpha_verbose_mcheck > 1) {
+ printk("t2_machine_check(cpu%d): last_taken 0x%x - "
+ "unexpected mcheck - code 0x%x\n",
+ cpu, t2_mcheck_last_taken,
+ (unsigned int)mchk_header->code);
+ }
+#endif
+ t2_mcheck_last_taken = 0;
+ mb();
+ return;
+ } else {
+ t2_mcheck_last_taken = 0;
+ mb();
+ }
+ }
+
+#ifdef CONFIG_VERBOSE_MCHECK
+ if (alpha_verbose_mcheck > 1) {
+ printk("%s t2_mcheck(cpu%d): last_taken 0x%x - "
+ "any_expected 0x%x - code 0x%x\n",
+ (mcheck_expected(cpu) ? "EX" : "UN"), cpu,
+ t2_mcheck_last_taken, t2_mcheck_any_expected,
+ (unsigned int)mchk_header->code);
+ }
+#endif
+
+ process_mcheck_info(vector, la_ptr, regs, "T2", mcheck_expected(cpu));
+}