aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/hwmon/abituguru-datasheet6
-rw-r--r--Documentation/networking/rxrpc.txt2
-rw-r--r--Documentation/scsi/ChangeLog.lpfc2
-rw-r--r--arch/blackfin/kernel/kgdb.c2
-rw-r--r--arch/ia64/kernel/kprobes.c2
-rw-r--r--arch/m68k/Kconfig2
-rw-r--r--arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c2
-rw-r--r--arch/powerpc/kernel/kprobes.c2
-rw-r--r--arch/powerpc/oprofile/cell/spu_profiler.c2
-rw-r--r--arch/s390/Kconfig2
-rw-r--r--arch/s390/kernel/kprobes.c2
-rw-r--r--arch/sparc/kernel/kprobes.c2
-rw-r--r--arch/x86/kernel/kprobes.c2
-rw-r--r--arch/x86/kernel/mfgpt_32.c2
-rw-r--r--drivers/hwmon/fschmd.c2
-rw-r--r--drivers/infiniband/hw/mlx4/cq.c2
-rw-r--r--drivers/message/i2o/i2o_scsi.c2
-rw-r--r--drivers/mtd/devices/pmc551.c2
-rw-r--r--drivers/mtd/ubi/eba.c2
-rw-r--r--drivers/mtd/ubi/io.c2
-rw-r--r--drivers/mtd/ubi/scan.c2
-rw-r--r--drivers/mtd/ubi/ubi-media.h4
-rw-r--r--drivers/mtd/ubi/vtbl.c2
-rw-r--r--drivers/mtd/ubi/wl.c4
-rw-r--r--drivers/net/bnx2x_link.c2
-rw-r--r--drivers/net/e1000/e1000_hw.c4
-rw-r--r--drivers/net/slip.h2
-rw-r--r--drivers/net/tehuti.c4
-rw-r--r--drivers/net/tokenring/smctr.c2
-rw-r--r--drivers/net/wireless/ipw2x00/ipw2100.c2
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00crypto.c4
-rw-r--r--drivers/net/wireless/strip.c2
-rw-r--r--drivers/s390/block/dasd_eer.c4
-rw-r--r--drivers/s390/char/vmlogrdr.c4
-rw-r--r--drivers/scsi/lpfc/lpfc_hbadisc.c4
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.c10
-rw-r--r--drivers/serial/crisv10.c4
-rw-r--r--drivers/video/console/vgacon.c2
-rw-r--r--fs/ocfs2/cluster/heartbeat.c2
-rw-r--r--fs/proc/task_nommu.c2
-rw-r--r--fs/ubifs/Kconfig2
-rw-r--r--fs/ubifs/budget.c4
-rw-r--r--fs/ubifs/gc.c2
-rw-r--r--fs/ubifs/journal.c2
-rw-r--r--fs/ubifs/shrinker.c2
-rw-r--r--fs/xfs/linux-2.6/xfs_super.c2
-rw-r--r--include/linux/mtd/mtd.h2
-rw-r--r--include/linux/spi/spi.h4
-rw-r--r--include/mtd/ubi-user.h2
-rw-r--r--kernel/pid.c2
-rw-r--r--kernel/time/jiffies.c2
-rw-r--r--net/sctp/auth.c4
-rw-r--r--net/sctp/sm_statefuns.c6
-rw-r--r--net/sctp/socket.c2
-rw-r--r--net/sctp/tsnmap.c2
-rw-r--r--sound/usb/usx2y/usbusx2y.c2
56 files changed, 76 insertions, 76 deletions
diff --git a/Documentation/hwmon/abituguru-datasheet b/Documentation/hwmon/abituguru-datasheet
index aef5a9b3684..4d184f2db0e 100644
--- a/Documentation/hwmon/abituguru-datasheet
+++ b/Documentation/hwmon/abituguru-datasheet
@@ -74,7 +74,7 @@ a sensor.
Notice that some banks have both a read and a write address this is how the
uGuru determines if a read from or a write to the bank is taking place, thus
when reading you should always use the read address and when writing the
-write address. The write address is always one (1) more then the read address.
+write address. The write address is always one (1) more than the read address.
uGuru ready
@@ -224,7 +224,7 @@ Bit 3: Beep if alarm (RW)
Bit 4: 1 if alarm cause measured temp is over the warning threshold (R)
Bit 5: 1 if alarm cause measured volt is over the max threshold (R)
Bit 6: 1 if alarm cause measured volt is under the min threshold (R)
-Bit 7: Volt sensor: Shutdown if alarm persist for more then 4 seconds (RW)
+Bit 7: Volt sensor: Shutdown if alarm persist for more than 4 seconds (RW)
Temp sensor: Shutdown if temp is over the shutdown threshold (RW)
* This bit is only honored/used by the uGuru if a temp sensor is connected
@@ -293,7 +293,7 @@ Byte 0:
Alarm behaviour for the selected sensor. A 1 enables the described behaviour.
Bit 0: Give an alarm if measured rpm is under the min threshold (RW)
Bit 3: Beep if alarm (RW)
-Bit 7: Shutdown if alarm persist for more then 4 seconds (RW)
+Bit 7: Shutdown if alarm persist for more than 4 seconds (RW)
Byte 1:
min threshold (scale as bank 0x26)
diff --git a/Documentation/networking/rxrpc.txt b/Documentation/networking/rxrpc.txt
index c3669a3fb4a..60d05eb77c6 100644
--- a/Documentation/networking/rxrpc.txt
+++ b/Documentation/networking/rxrpc.txt
@@ -540,7 +540,7 @@ A client would issue an operation by:
MSG_MORE should be set in msghdr::msg_flags on all but the last part of
the request. Multiple requests may be made simultaneously.
- If a call is intended to go to a destination other then the default
+ If a call is intended to go to a destination other than the default
specified through connect(), then msghdr::msg_name should be set on the
first request message of that call.
diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc
index ae3f962a7cf..ff19a52fe00 100644
--- a/Documentation/scsi/ChangeLog.lpfc
+++ b/Documentation/scsi/ChangeLog.lpfc
@@ -733,7 +733,7 @@ Changes from 20040920 to 20041018
I/O completion path a little more, especially taking care of
fast-pathing the non-error case. Also removes tons of dead
members and defines from lpfc_scsi.h - e.g. lpfc_target is down
- to nothing more then the lpfc_nodelist pointer.
+ to nothing more than the lpfc_nodelist pointer.
* Added binary sysfs file to issue mbox commands
* Replaced #if __BIG_ENDIAN with #if __BIG_ENDIAN_BITFIELD for
compatibility with the user space applications.
diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c
index b795a207742..1c5afaeb950 100644
--- a/arch/blackfin/kernel/kgdb.c
+++ b/arch/blackfin/kernel/kgdb.c
@@ -105,7 +105,7 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
* Extracts ebp, esp and eip values understandable by gdb from the values
* saved by switch_to.
* thread.esp points to ebp. flags and ebp are pushed in switch_to hence esp
- * prior to entering switch_to is 8 greater then the value that is saved.
+ * prior to entering switch_to is 8 greater than the value that is saved.
* If switch_to changes, change following code appropriately.
*/
void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c
index f07688da947..0017b9de2dd 100644
--- a/arch/ia64/kernel/kprobes.c
+++ b/arch/ia64/kernel/kprobes.c
@@ -434,7 +434,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
/*
* It is possible to have multiple instances associated with a given
* task either because an multiple functions in the call path
- * have a return probe installed on them, and/or more then one return
+ * have a return probe installed on them, and/or more than one return
* return probe was registered for a target function.
*
* We can handle this because:
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index c825bde17cb..fb87c08c6b5 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -303,7 +303,7 @@ config M68KFPU_EMU_EXTRAPREC
correct rounding, the emulator can (often) do the same but this
extra calculation can cost quite some time, so you can disable
it here. The emulator will then "only" calculate with a 64 bit
- mantissa and round slightly incorrect, what is more then enough
+ mantissa and round slightly incorrect, what is more than enough
for normal usage.
config M68KFPU_EMU_ONLY
diff --git a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
index 97862f45496..caf5e9a0acc 100644
--- a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
+++ b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
@@ -148,7 +148,7 @@ int read_eeprom(char *buffer, int eeprom_size, int size)
send_byte(W_HEADER);
recv_ack();
- /* EEPROM with size of more then 2K need two byte addressing */
+ /* EEPROM with size of more than 2K need two byte addressing */
if (eeprom_size > 2048) {
send_byte(0x00);
recv_ack();
diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
index de79915452c..b29005a5a8f 100644
--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -316,7 +316,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
/*
* It is possible to have multiple instances associated with a given
* task either because an multiple functions in the call path
- * have a return probe installed on them, and/or more then one return
+ * have a return probe installed on them, and/or more than one return
* return probe was registered for a target function.
*
* We can handle this because:
diff --git a/arch/powerpc/oprofile/cell/spu_profiler.c b/arch/powerpc/oprofile/cell/spu_profiler.c
index dd499c3e9da..83faa958b9d 100644
--- a/arch/powerpc/oprofile/cell/spu_profiler.c
+++ b/arch/powerpc/oprofile/cell/spu_profiler.c
@@ -49,7 +49,7 @@ void set_spu_profiling_frequency(unsigned int freq_khz, unsigned int cycles_rese
* of precision. This is close enough for the purpose at hand.
*
* The value of the timeout should be small enough that the hw
- * trace buffer will not get more then about 1/3 full for the
+ * trace buffer will not get more than about 1/3 full for the
* maximum user specified (the LFSR value) hw sampling frequency.
* This is to ensure the trace buffer will never fill even if the
* kernel thread scheduling varies under a heavy system load.
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 19577aeffd7..a94a3c3ae93 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -299,7 +299,7 @@ config WARN_STACK
This option enables the compiler options -mwarn-framesize and
-mwarn-dynamicstack. If the compiler supports these options it
will generate warnings for function which either use alloca or
- create a stack frame bigger then CONFIG_WARN_STACK_SIZE.
+ create a stack frame bigger than CONFIG_WARN_STACK_SIZE.
Say N if you are unsure.
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index 569079ec4ff..267f6698680 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -381,7 +381,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
/*
* It is possible to have multiple instances associated with a given
* task either because an multiple functions in the call path
- * have a return probe installed on them, and/or more then one return
+ * have a return probe installed on them, and/or more than one return
* return probe was registered for a target function.
*
* We can handle this because:
diff --git a/arch/sparc/kernel/kprobes.c b/arch/sparc/kernel/kprobes.c
index 201a6e547e4..3bc6527c95a 100644
--- a/arch/sparc/kernel/kprobes.c
+++ b/arch/sparc/kernel/kprobes.c
@@ -517,7 +517,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
/*
* It is possible to have multiple instances associated with a given
* task either because an multiple functions in the call path
- * have a return probe installed on them, and/or more then one return
+ * have a return probe installed on them, and/or more than one return
* return probe was registered for a target function.
*
* We can handle this because:
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index 6c27679ec6a..a116e6d5726 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -694,7 +694,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
/*
* It is possible to have multiple instances associated with a given
* task either because multiple functions in the call path have
- * return probes installed on them, and/or more then one
+ * return probes installed on them, and/or more than one
* return probe was registered for a target function.
*
* We can handle this because:
diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c
index c12314c9e86..8815f3c7fec 100644
--- a/arch/x86/kernel/mfgpt_32.c
+++ b/arch/x86/kernel/mfgpt_32.c
@@ -252,7 +252,7 @@ EXPORT_SYMBOL_GPL(geode_mfgpt_alloc_timer);
/*
* The MFPGT timers on the CS5536 provide us with suitable timers to use
* as clock event sources - not as good as a HPET or APIC, but certainly
- * better then the PIT. This isn't a general purpose MFGPT driver, but
+ * better than the PIT. This isn't a general purpose MFGPT driver, but
* a simplified one designed specifically to act as a clock event source.
* For full details about the MFGPT, please consult the CS5536 data sheet.
*/
diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c
index 96717036893..8b2d756595d 100644
--- a/drivers/hwmon/fschmd.c
+++ b/drivers/hwmon/fschmd.c
@@ -75,7 +75,7 @@ static const u8 FSCHMD_REG_VOLT[3] = { 0x45, 0x42, 0x48 };
/* minimum pwm at which the fan is driven (pwm can by increased depending on
the temp. Notice that for the scy some fans share there minimum speed.
- Also notice that with the scy the sensor order is different then with the
+ Also notice that with the scy the sensor order is different than with the
other chips, this order was in the 2.4 driver and kept for consistency. */
static const u8 FSCHMD_REG_FAN_MIN[5][6] = {
{ 0x55, 0x65 }, /* pos */
diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c
index a3c5af1d7ec..de5263beab4 100644
--- a/drivers/infiniband/hw/mlx4/cq.c
+++ b/drivers/infiniband/hw/mlx4/cq.c
@@ -367,7 +367,7 @@ int mlx4_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata)
if (err)
goto out;
} else {
- /* Can't be smaller then the number of outstanding CQEs */
+ /* Can't be smaller than the number of outstanding CQEs */
outst_cqe = mlx4_ib_get_outstanding_cqes(cq);
if (entries < outst_cqe + 1) {
err = 0;
diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c
index 1bcdbbb9e7d..3d45817e6dc 100644
--- a/drivers/message/i2o/i2o_scsi.c
+++ b/drivers/message/i2o/i2o_scsi.c
@@ -390,7 +390,7 @@ static int i2o_scsi_reply(struct i2o_controller *c, u32 m,
* @i2o_dev: the I2O device which was added
*
* If a I2O device is added we catch the notification, because I2O classes
- * other then SCSI peripheral will not be received through
+ * other than SCSI peripheral will not be received through
* i2o_scsi_probe().
*/
static void i2o_scsi_notify_device_add(struct i2o_device *i2o_dev)
diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c
index d38bca64bb1..d2fd550f7e0 100644
--- a/drivers/mtd/devices/pmc551.c
+++ b/drivers/mtd/devices/pmc551.c
@@ -34,7 +34,7 @@
* aperture size, not the dram size, and the V370PDC supplies no
* other method for memory size discovery. This problem is
* mostly only relevant when compiled as a module, as the
- * unloading of the module with an aperture size smaller then
+ * unloading of the module with an aperture size smaller than
* the ram will cause the driver to detect the onboard memory
* size to be equal to the aperture size when the module is
* reloaded. Soooo, to help, the module supports an msize
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 048a606cebd..25def348e5b 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -717,7 +717,7 @@ write_error:
* to the real data size, although the @buf buffer has to contain the
* alignment. In all other cases, @len has to be aligned.
*
- * It is prohibited to write more then once to logical eraseblocks of static
+ * It is prohibited to write more than once to logical eraseblocks of static
* volumes. This function returns zero in case of success and a negative error
* code in case of failure.
*/
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index a74118c0574..fe81039f2a7 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -465,7 +465,7 @@ out:
* This function synchronously erases physical eraseblock @pnum. If @torture
* flag is not zero, the physical eraseblock is checked by means of writing
* different patterns to it and reading them back. If the torturing is enabled,
- * the physical eraseblock is erased more then once.
+ * the physical eraseblock is erased more than once.
*
* This function returns the number of erasures made in case of success, %-EIO
* if the erasure failed or the torturing test failed, and other negative error
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index 41d47e1cf15..ecde202a5a1 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -478,7 +478,7 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
return 0;
} else {
/*
- * This logical eraseblock is older then the one found
+ * This logical eraseblock is older than the one found
* previously.
*/
if (cmp_res & 4)
diff --git a/drivers/mtd/ubi/ubi-media.h b/drivers/mtd/ubi/ubi-media.h
index 2ad94040905..8419fdccc79 100644
--- a/drivers/mtd/ubi/ubi-media.h
+++ b/drivers/mtd/ubi/ubi-media.h
@@ -135,7 +135,7 @@ enum {
* The erase counter header takes 64 bytes and has a plenty of unused space for
* future usage. The unused fields are zeroed. The @version field is used to
* indicate the version of UBI implementation which is supposed to be able to
- * work with this UBI image. If @version is greater then the current UBI
+ * work with this UBI image. If @version is greater than the current UBI
* version, the image is rejected. This may be useful in future if something
* is changed radically. This field is duplicated in the volume identifier
* header.
@@ -187,7 +187,7 @@ struct ubi_ec_hdr {
* (sequence number) is used to distinguish between older and newer versions of
* logical eraseblocks.
*
- * There are 2 situations when there may be more then one physical eraseblock
+ * There are 2 situations when there may be more than one physical eraseblock
* corresponding to the same logical eraseblock, i.e., having the same @vol_id
* and @lnum values in the volume identifier header. Suppose we have a logical
* eraseblock L and it is mapped to the physical eraseblock P.
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index 333c8941552..1afc61e7455 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -577,7 +577,7 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si,
if (vtbl[i].flags & UBI_VTBL_AUTORESIZE_FLG) {
/* Auto re-size flag may be set only for one volume */
if (ubi->autoresize_vol_id != -1) {
- ubi_err("more then one auto-resize volume (%d "
+ ubi_err("more than one auto-resize volume (%d "
"and %d)", ubi->autoresize_vol_id, i);
kfree(vol);
return -EINVAL;
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 14901cb82c1..891534f8210 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -128,7 +128,7 @@
* situation when the picked physical eraseblock is constantly erased after the
* data is written to it. So, we have a constant which limits the highest erase
* counter of the free physical eraseblock to pick. Namely, the WL sub-system
- * does not pick eraseblocks with erase counter greater then the lowest erase
+ * does not pick eraseblocks with erase counter greater than the lowest erase
* counter plus %WL_FREE_MAX_DIFF.
*/
#define WL_FREE_MAX_DIFF (2*UBI_WL_THRESHOLD)
@@ -917,7 +917,7 @@ static int ensure_wear_leveling(struct ubi_device *ubi)
/*
* We schedule wear-leveling only if the difference between the
* lowest erase counter of used physical eraseblocks and a high
- * erase counter of free physical eraseblocks is greater then
+ * erase counter of free physical eraseblocks is greater than
* %UBI_WL_THRESHOLD.
*/
e1 = rb_entry(rb_first(&ubi->used), struct ubi_wl_entry, u.rb);
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index 67de94f1f30..fefa6ab1306 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -3359,7 +3359,7 @@ static u8 bnx2x_format_ver(u32 num, u8 *str, u16 len)
u8 shift = 8*4;
u8 digit;
if (len < 10) {
- /* Need more then 10chars for this format */
+ /* Need more than 10chars for this format */
*str_ptr = '\0';
return -EINVAL;
}
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index d04eef53571..e1a3fc1303e 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -6758,7 +6758,7 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
* returns: - E1000_ERR_XXX
* E1000_SUCCESS
*
- * For phy's older then IGP, this function simply reads the polarity bit in the
+ * For phy's older than IGP, this function simply reads the polarity bit in the
* Phy Status register. For IGP phy's, this bit is valid only if link speed is
* 10 Mbps. If the link speed is 100 Mbps there is no polarity so this bit will
* return 0. If the link speed is 1000 Mbps the polarity status is in the
@@ -6834,7 +6834,7 @@ static s32 e1000_check_polarity(struct e1000_hw *hw,
* returns: - E1000_ERR_XXX
* E1000_SUCCESS
*
- * For phy's older then IGP, this function reads the Downshift bit in the Phy
+ * For phy's older than IGP, this function reads the Downshift bit in the Phy
* Specific Status register. For IGP phy's, it reads the Downgrade bit in the
* Link Health register. In IGP this bit is latched high, so the driver must
* read it immediately after link is established.
diff --git a/drivers/net/slip.h b/drivers/net/slip.h
index 853e0f6ec71..9ea5c11287d 100644
--- a/drivers/net/slip.h
+++ b/drivers/net/slip.h
@@ -75,7 +75,7 @@ struct slip {
unsigned long tx_errors; /* Planned stuff */
unsigned long rx_dropped; /* No memory for skb */
unsigned long tx_dropped; /* When MTU change */
- unsigned long rx_over_errors; /* Frame bigger then SLIP buf. */
+ unsigned long rx_over_errors; /* Frame bigger than SLIP buf. */
#ifdef SL_INCLUDE_CSLIP
unsigned long tx_compressed;
unsigned long rx_compressed;
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index a10a83a11d9..a7a4dc4d631 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -1004,7 +1004,7 @@ static inline void bdx_rxdb_free_elem(struct rxdb *db, int n)
* skb for rx. It assumes that Rx is desabled in HW
* funcs are grouped for better cache usage
*
- * RxD fifo is smaller then RxF fifo by design. Upon high load, RxD will be
+ * RxD fifo is smaller than RxF fifo by design. Upon high load, RxD will be
* filled and packets will be dropped by nic without getting into host or
* cousing interrupt. Anyway, in that condition, host has no chance to proccess
* all packets, but dropping in nic is cheaper, since it takes 0 cpu cycles
@@ -1826,7 +1826,7 @@ static void bdx_tx_free(struct bdx_priv *priv)
*
* Pushes desc to TxD fifo and overlaps it if needed.
* NOTE: this func does not check for available space. this is responsibility
- * of the caller. Neither does it check that data size is smaller then
+ * of the caller. Neither does it check that data size is smaller than
* fifo size.
*/
static void bdx_tx_push_desc(struct bdx_priv *priv, void *data, int size)
diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c
index a011666342f..50eb29ce3c8 100644
--- a/drivers/net/tokenring/smctr.c
+++ b/drivers/net/tokenring/smctr.c
@@ -3064,7 +3064,7 @@ static int smctr_load_node_addr(struct net_device *dev)
* will consequently cause a timeout.
*
* NOTE 1: If the monitor_state is MS_BEACON_TEST_STATE, all transmit
- * queues other then the one used for the lobe_media_test should be
+ * queues other than the one used for the lobe_media_test should be
* disabled.!?
*
* NOTE 2: If the monitor_state is MS_BEACON_TEST_STATE and the receive_mask
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 1667065b86a..753de1a9c4b 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -1332,7 +1332,7 @@ static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv)
IPW_AUX_HOST_RESET_REG_STOP_MASTER);
/* Step 2. Wait for stop Master Assert
- * (not more then 50us, otherwise ret error */
+ * (not more than 50us, otherwise ret error */
i = 5;
do {
udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY);
diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c
index 37ad0d2fb64..aee9cba13eb 100644
--- a/drivers/net/wireless/rt2x00/rt2x00crypto.c
+++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c
@@ -184,8 +184,8 @@ void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align,
* Make room for new data, note that we increase both
* headsize and tailsize when required. The tailsize is
* only needed when ICV data needs to be inserted and
- * the padding is smaller then the ICV data.
- * When alignment requirements is greater then the
+ * the padding is smaller than the ICV data.
+ * When alignment requirements is greater than the
* ICV data we must trim the skb to the correct size
* because we need to remove the extra bytes.
*/
diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c
index dd0de3a9ed4..7015f248055 100644
--- a/drivers/net/wireless/strip.c
+++ b/drivers/net/wireless/strip.c
@@ -236,7 +236,7 @@ struct strip {
unsigned long tx_errors; /* Planned stuff */
unsigned long rx_dropped; /* No memory for skb */
unsigned long tx_dropped; /* When MTU change */
- unsigned long rx_over_errors; /* Frame bigger then STRIP buf. */
+ unsigned long rx_over_errors; /* Frame bigger than STRIP buf. */
unsigned long pps_timer; /* Timer to determine pps */
unsigned long rx_pps_count; /* Counter to determine pps */
diff --git a/drivers/s390/block/dasd_eer.c b/drivers/s390/block/dasd_eer.c
index 892e2878d61..f8e05ce9862 100644
--- a/drivers/s390/block/dasd_eer.c
+++ b/drivers/s390/block/dasd_eer.c
@@ -535,8 +535,8 @@ static int dasd_eer_open(struct inode *inp, struct file *filp)
eerb->buffer_page_count > INT_MAX / PAGE_SIZE) {
kfree(eerb);
MESSAGE(KERN_WARNING, "can't open device since module "
- "parameter eer_pages is smaller then 1 or"
- " bigger then %d", (int)(INT_MAX / PAGE_SIZE));
+ "parameter eer_pages is smaller than 1 or"
+ " bigger than %d", (int)(INT_MAX / PAGE_SIZE));
unlock_kernel();
return -EINVAL;
}
diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c
index aabbeb909cc..d8a2289fcb6 100644
--- a/drivers/s390/char/vmlogrdr.c
+++ b/drivers/s390/char/vmlogrdr.c
@@ -427,7 +427,7 @@ static int vmlogrdr_receive_data(struct vmlogrdr_priv_t *priv)
buffer = priv->buffer + sizeof(int);
}
/*
- * If the record is bigger then our buffer, we receive only
+ * If the record is bigger than our buffer, we receive only
* a part of it. We can get the rest later.
*/
if (iucv_data_count > NET_BUFFER_SIZE)
@@ -437,7 +437,7 @@ static int vmlogrdr_receive_data(struct vmlogrdr_priv_t *priv)
0, buffer, iucv_data_count,
&priv->residual_length);
spin_unlock_bh(&priv->priv_lock);
- /* An rc of 5 indicates that the record was bigger then
+ /* An rc of 5 indicates that the record was bigger than
* the buffer, which is OK for us. A 9 indicates that the
* record was purged befor we could receive it.
*/
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 8c64494444b..311ed6dea72 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1964,10 +1964,10 @@ lpfc_set_disctmo(struct lpfc_vport *vport)
uint32_t tmo;
if (vport->port_state == LPFC_LOCAL_CFG_LINK) {
- /* For FAN, timeout should be greater then edtov */
+ /* For FAN, timeout should be greater than edtov */
tmo = (((phba->fc_edtov + 999) / 1000) + 1);
} else {
- /* Normal discovery timeout should be > then ELS/CT timeout
+ /* Normal discovery timeout should be > than ELS/CT timeout
* FC spec states we need 3 * ratov for CT requests
*/
tmo = ((phba->fc_ratov * 3) + 3);
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 01dfdc8696f..a36a120561e 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -420,7 +420,7 @@ lpfc_sli_next_iocb_slot (struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
if (unlikely(pring->local_getidx >= max_cmd_idx)) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0315 Ring %d issue: portCmdGet %d "
- "is bigger then cmd ring %d\n",
+ "is bigger than cmd ring %d\n",
pring->ringno,
pring->local_getidx, max_cmd_idx);
@@ -1628,12 +1628,12 @@ lpfc_sli_rsp_pointers_error(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
{
struct lpfc_pgp *pgp = &phba->port_gp[pring->ringno];
/*
- * Ring <ringno> handler: portRspPut <portRspPut> is bigger then
+ * Ring <ringno> handler: portRspPut <portRspPut> is bigger than
* rsp ring <portRspMax>
*/
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0312 Ring %d handler: portRspPut %d "
- "is bigger then rsp ring %d\n",
+ "is bigger than rsp ring %d\n",
pring->ringno, le32_to_cpu(pgp->rspPutInx),
pring->numRiocb);
@@ -2083,12 +2083,12 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
portRspPut = le32_to_cpu(pgp->rspPutInx);
if (portRspPut >= portRspMax) {
/*
- * Ring <ringno> handler: portRspPut <portRspPut> is bigger then
+ * Ring <ringno> handler: portRspPut <portRspPut> is bigger than
* rsp ring <portRspMax>
*/
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0303 Ring %d handler: portRspPut %d "
- "is bigger then rsp ring %d\n",
+ "is bigger than rsp ring %d\n",
pring->ringno, portRspPut, portRspMax);
phba->link_state = LPFC_HBA_ERROR;
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index 8b2c619a09f..e642c22c80e 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -1203,7 +1203,7 @@ static void e100_disable_txdma_channel(struct e100_serial *info)
unsigned long flags;
/* Disable output DMA channel for the serial port in question
- * ( set to something other then serialX)
+ * ( set to something other than serialX)
*/
local_irq_save(flags);
DFLOW(DEBUG_LOG(info->line, "disable_txdma_channel %i\n", info->line));
@@ -1266,7 +1266,7 @@ static void e100_disable_rxdma_channel(struct e100_serial *info)
unsigned long flags;
/* Disable input DMA channel for the serial port in question
- * ( set to something other then serialX)
+ * ( set to something other than serialX)
*/
local_irq_save(flags);
if (info->line == 0) {
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index e6210725b9a..d012edda6d1 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -1332,7 +1332,7 @@ static void vgacon_save_screen(struct vc_data *c)
c->vc_y = screen_info.orig_y;
}
- /* We can't copy in more then the size of the video buffer,
+ /* We can't copy in more than the size of the video buffer,
* or we'll be copying in VGA BIOS */
if (!vga_is_gfx)
diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c
index 6ebaa58e2c0..04697ba7f73 100644
--- a/fs/ocfs2/cluster/heartbeat.c
+++ b/fs/ocfs2/cluster/heartbeat.c
@@ -854,7 +854,7 @@ static int o2hb_thread(void *data)
while (!kthread_should_stop() && !reg->hr_unclean_stop) {
/* We track the time spent inside
- * o2hb_do_disk_heartbeat so that we avoid more then
+ * o2hb_do_disk_heartbeat so that we avoid more than
* hr_timeout_ms between disk writes. On busy systems
* this should result in a heartbeat which is less
* likely to time itself out. */
diff --git a/fs/proc/task_nommu.c b/fs/proc/task_nommu.c
index 219bd79ea89..d4a8be32b90 100644
--- a/fs/proc/task_nommu.c
+++ b/fs/proc/task_nommu.c
@@ -9,7 +9,7 @@
/*
* Logic: we've got two memory sums for each process, "shared", and
- * "non-shared". Shared memory may get counted more then once, for
+ * "non-shared". Shared memory may get counted more than once, for
* each process that owns it. Non-shared memory is counted
* accurately.
*/
diff --git a/fs/ubifs/Kconfig b/fs/ubifs/Kconfig
index 91ceeda7e5b..e35b54d5059 100644
--- a/fs/ubifs/Kconfig
+++ b/fs/ubifs/Kconfig
@@ -40,7 +40,7 @@ config UBIFS_FS_ZLIB
depends on UBIFS_FS
default y
help
- Zlib copresses better then LZO but it is slower. Say 'Y' if unsure.
+ Zlib compresses better than LZO but it is slower. Say 'Y' if unsure.
# Debugging-related stuff
config UBIFS_FS_DEBUG
diff --git a/fs/ubifs/budget.c b/fs/ubifs/budget.c
index 0e5e54d8292..175f9c590b7 100644
--- a/fs/ubifs/budget.c
+++ b/fs/ubifs/budget.c
@@ -142,7 +142,7 @@ static long long get_liability(struct ubifs_info *c)
*
* This function is called when an operation cannot be budgeted because there
* is supposedly no free space. But in most cases there is some free space:
- * o budgeting is pessimistic, so it always budgets more then it is actually
+ * o budgeting is pessimistic, so it always budgets more than it is actually
* needed, so shrinking the liability is one way to make free space - the
* cached data will take less space then it was budgeted for;
* o GC may turn some dark space into free space (budgeting treats dark space
@@ -606,7 +606,7 @@ void ubifs_release_budget(struct ubifs_info *c, struct ubifs_budget_req *req)
* @c: UBIFS file-system description object
*
* This function converts budget which was allocated for a new page of data to
- * the budget of changing an existing page of data. The latter is smaller then
+ * the budget of changing an existing page of data. The latter is smaller than
* the former, so this function only does simple re-calculation and does not
* involve any write-back.
*/
diff --git a/fs/ubifs/gc.c b/fs/ubifs/gc.c
index 0bef6501d58..9832f9abe28 100644
--- a/fs/ubifs/gc.c
+++ b/fs/ubifs/gc.c
@@ -45,7 +45,7 @@
#define SMALL_NODE_WM UBIFS_MAX_DENT_NODE_SZ
/*
- * GC may need to move more then one LEB to make progress. The below constants
+ * GC may need to move more than one LEB to make progress. The below constants
* define "soft" and "hard" limits on the number of LEBs the garbage collector
* may move.
*/
diff --git a/fs/ubifs/journal.c b/fs/ubifs/journal.c
index 10ae25b7d1d..9b7c54e0cd2 100644
--- a/fs/ubifs/journal.c
+++ b/fs/ubifs/journal.c
@@ -191,7 +191,7 @@ again:
if (wbuf->lnum != -1 && avail >= len) {
/*
* Someone else has switched the journal head and we have
- * enough space now. This happens when more then one process is
+ * enough space now. This happens when more than one process is
* trying to write to the same journal head at the same time.
*/
dbg_jnl("return LEB %d back, already have LEB %d:%d",
diff --git a/fs/ubifs/shrinker.c b/fs/ubifs/shrinker.c
index f248533841a..e7bab52a141 100644
--- a/fs/ubifs/shrinker.c
+++ b/fs/ubifs/shrinker.c
@@ -151,7 +151,7 @@ static int shrink_tnc(struct ubifs_info *c, int nr, int age, int *contention)
* @contention: if any contention, this is set to %1
*
* This function walks the list of mounted UBIFS file-systems and frees clean
- * znodes which are older then @age, until at least @nr znodes are freed.
+ * znodes which are older than @age, until at least @nr znodes are freed.
* Returns the number of freed znodes.
*/
static int shrink_tnc_trees(int nr, int age, int *contention)
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index 36f6cc703ef..be846d606ae 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -1348,7 +1348,7 @@ xfs_finish_flags(
{
int ronly = (mp->m_flags & XFS_MOUNT_RDONLY);
- /* Fail a mount where the logbuf is smaller then the log stripe */
+ /* Fail a mount where the logbuf is smaller than the log stripe */
if (xfs_sb_version_haslogv2(&mp->m_sb)) {
if (mp->m_logbsize <= 0 &&
mp->m_sb.sb_logsunit > XLOG_BIG_RECORD_BSIZE) {
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index eae26bb6430..64433eb411d 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -83,7 +83,7 @@ typedef enum {
* @datbuf: data buffer - if NULL only oob data are read/written
* @oobbuf: oob data buffer
*
- * Note, it is allowed to read more then one OOB area at one go, but not write.
+ * Note, it is allowed to read more than one OOB area at one go, but not write.
* The interface assumes that the OOB write requests program only one page's
* OOB area.
*/
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 82229317753..68bb1c501d0 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -327,9 +327,9 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum);
* @tx_dma: DMA address of tx_buf, if @spi_message.is_dma_mapped
* @rx_dma: DMA address of rx_buf, if @spi_message.is_dma_mapped
* @len: size of rx and tx buffers (in bytes)
- * @speed_hz: Select a speed other then the device default for this
+ * @speed_hz: Select a speed other than the device default for this
* transfer. If 0 the default (from @spi_device) is used.
- * @bits_per_word: select a bits_per_word other then the device default
+ * @bits_per_word: select a bits_per_word other than the device default
* for this transfer. If 0 the default (from @spi_device) is used.
* @cs_change: affects chipselect after this transfer completes
* @delay_usecs: microseconds to delay after this transfer before
diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h
index ccdc562e444..2dc2eb2b8e2 100644
--- a/include/mtd/ubi-user.h
+++ b/include/mtd/ubi-user.h
@@ -253,7 +253,7 @@ struct ubi_mkvol_req {
*
* Re-sizing is possible for both dynamic and static volumes. But while dynamic
* volumes may be re-sized arbitrarily, static volumes cannot be made to be
- * smaller then the number of bytes they bear. To arbitrarily shrink a static
+ * smaller than the number of bytes they bear. To arbitrarily shrink a static
* volume, it must be wiped out first (by means of volume update operation with
* zero number of bytes).
*/
diff --git a/kernel/pid.c b/kernel/pid.c
index 064e76afa50..af9224cdd6c 100644
--- a/kernel/pid.c
+++ b/kernel/pid.c
@@ -475,7 +475,7 @@ pid_t task_session_nr_ns(struct task_struct *tsk, struct pid_namespace *ns)
EXPORT_SYMBOL(task_session_nr_ns);
/*
- * Used by proc to find the first pid that is greater then or equal to nr.
+ * Used by proc to find the first pid that is greater than or equal to nr.
*
* If there is a pid at nr this function is exactly the same as find_pid_ns.
*/
diff --git a/kernel/time/jiffies.c b/kernel/time/jiffies.c
index 1ca99557e92..06f197560f3 100644
--- a/kernel/time/jiffies.c
+++ b/kernel/time/jiffies.c
@@ -45,7 +45,7 @@
*
* The value 8 is somewhat carefully chosen, as anything
* larger can result in overflows. NSEC_PER_JIFFY grows as
- * HZ shrinks, so values greater then 8 overflow 32bits when
+ * HZ shrinks, so values greater than 8 overflow 32bits when
* HZ=100.
*/
#define JIFFIES_SHIFT 8
diff --git a/net/sctp/auth.c b/net/sctp/auth.c
index 52db5f60daa..20c576f530f 100644
--- a/net/sctp/auth.c
+++ b/net/sctp/auth.c
@@ -141,8 +141,8 @@ void sctp_auth_destroy_keys(struct list_head *keys)
/* Compare two byte vectors as numbers. Return values
* are:
* 0 - vectors are equal
- * < 0 - vector 1 is smaller then vector2
- * > 0 - vector 1 is greater then vector2
+ * < 0 - vector 1 is smaller than vector2
+ * > 0 - vector 1 is greater than vector2
*
* Algorithm is:
* This is performed by selecting the numerically smaller key vector...
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index 1c4e5d6c29c..3a0cd075914 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -4268,9 +4268,9 @@ nomem:
/*
* Handle a protocol violation when the chunk length is invalid.
- * "Invalid" length is identified as smaller then the minimal length a
+ * "Invalid" length is identified as smaller than the minimal length a
* given chunk can be. For example, a SACK chunk has invalid length
- * if it's length is set to be smaller then the size of sctp_sack_chunk_t.
+ * if its length is set to be smaller than the size of sctp_sack_chunk_t.
*
* We inform the other end by sending an ABORT with a Protocol Violation
* error code.
@@ -4300,7 +4300,7 @@ static sctp_disposition_t sctp_sf_violation_chunklen(
/*
* Handle a protocol violation when the parameter length is invalid.
- * "Invalid" length is identified as smaller then the minimal length a
+ * "Invalid" length is identified as smaller than the minimal length a
* given parameter can be.
*/
static sctp_disposition_t sctp_sf_violation_paramlen(
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index b14a8f33e42..ff0a8f88de0 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -2717,7 +2717,7 @@ static int sctp_setsockopt_associnfo(struct sock *sk, char __user *optval, int o
paths++;
}
- /* Only validate asocmaxrxt if we have more then
+ /* Only validate asocmaxrxt if we have more than
* one path/transport. We do this because path
* retransmissions are only counted when we have more
* then one path.
diff --git a/net/sctp/tsnmap.c b/net/sctp/tsnmap.c
index 35c73e82553..9bd64565021 100644
--- a/net/sctp/tsnmap.c
+++ b/net/sctp/tsnmap.c
@@ -227,7 +227,7 @@ void sctp_tsnmap_skip(struct sctp_tsnmap *map, __u32 tsn)
*/
bitmap_zero(map->tsn_map, map->len);
} else {
- /* If the gap is smaller then the map size,
+ /* If the gap is smaller than the map size,
* shift the map by 'gap' bits and update further.
*/
bitmap_shift_right(map->tsn_map, map->tsn_map, gap, map->len);
diff --git a/sound/usb/usx2y/usbusx2y.c b/sound/usb/usx2y/usbusx2y.c
index ca26c532e77..11639bd72a5 100644
--- a/sound/usb/usx2y/usbusx2y.c
+++ b/sound/usb/usx2y/usbusx2y.c
@@ -238,7 +238,7 @@ static void i_usX2Y_In04Int(struct urb *urb)
send = 0;
for (j = 0; j < URBS_AsyncSeq && !err; ++j)
if (0 == usX2Y->AS04.urb[j]->status) {
- struct us428_p4out *p4out = us428ctls->p4out + send; // FIXME if more then 1 p4out is new, 1 gets lost.
+ struct us428_p4out *p4out = us428ctls->p4out + send; // FIXME if more than 1 p4out is new, 1 gets lost.
usb_fill_bulk_urb(usX2Y->AS04.urb[j], usX2Y->chip.dev,
usb_sndbulkpipe(usX2Y->chip.dev, 0x04), &p4out->val.vol,
p4out->type == eLT_Light ? sizeof(struct us428_lights) : 5,