aboutsummaryrefslogtreecommitdiff
path: root/drivers/cs8900.h
blob: f886d103c13ae3977307b3a245889da91d6edfd6 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
/*
 * Cirrus Logic CS8900A Ethernet
 *
 * (C) Copyright 2002
 * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
 * Marius Groeger <mgroeger@sysgo.de>
 *
 * Copyright (C) 1999 Ben Williamson <benw@pobox.com>
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is loaded into SRAM in bootstrap mode, where it waits
 * for commands on UART1 to read and write memory, jump to code etc.
 * A design goal for this program is to be entirely independent of the
 * target board.  Anything with a CL-PS7111 or EP7211 should be able to run
 * this code in bootstrap mode.  All the board specifics can be handled on
 * the host.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <asm/types.h>
#include <config.h>

#ifdef CONFIG_DRIVER_CS8900

/* although the registers are 16 bit, they are 32-bit aligned on the
   EDB7111. so we have to read them as 32-bit registers and ignore the
   upper 16-bits. i'm not sure if this holds for the EDB7211. */

#ifdef CS8900_BUS16
  /* 16 bit aligned registers, 16 bit wide */
  #define CS8900_REG u16
  #define CS8900_OFF 0x02
  #define CS8900_BUS16_0  *(volatile u8 *)(CS8900_BASE+0x00)
  #define CS8900_BUS16_1  *(volatile u8 *)(CS8900_BASE+0x01)
#elif  defined(CS8900_BUS32)
  /* 32 bit aligned registers, 16 bit wide (we ignore upper 16 bits) */
  #define CS8900_REG u32
  #define CS8900_OFF 0x04
#else
  #error unknown bussize ...
#endif

#define CS8900_RTDATA *(volatile CS8900_REG *)(CS8900_BASE+0x00*CS8900_OFF)
#define CS8900_TxCMD  *(volatile CS8900_REG *)(CS8900_BASE+0x02*CS8900_OFF)
#define CS8900_TxLEN  *(volatile CS8900_REG *)(CS8900_BASE+0x03*CS8900_OFF)
#define CS8900_ISQ    *(volatile CS8900_REG *)(CS8900_BASE+0x04*CS8900_OFF)
#define CS8900_PPTR   *(volatile CS8900_REG *)(CS8900_BASE+0x05*CS8900_OFF)
#define CS8900_PDATA  *(volatile CS8900_REG *)(CS8900_BASE+0x06*CS8900_OFF)


#define ISQ_RxEvent     0x04
#define ISQ_TxEvent     0x08
#define ISQ_BufEvent    0x0C
#define ISQ_RxMissEvent 0x10
#define ISQ_TxColEvent  0x12
#define ISQ_EventMask   0x3F

/* packet page register offsets */

/* bus interface registers */
#define PP_ChipID    0x0000  /* Chip identifier - must be 0x630E */
#define PP_ChipRev   0x0002  /* Chip revision, model codes */

#define PP_IntReg    0x0022  /* Interrupt configuration */
#define PP_IntReg_IRQ0         0x0000  /* Use INTR0 pin */
#define PP_IntReg_IRQ1         0x0001  /* Use INTR1 pin */
#define PP_IntReg_IRQ2         0x0002  /* Use INTR2 pin */
#define PP_IntReg_IRQ3         0x0003  /* Use INTR3 pin */

/* status and control registers */

#define PP_RxCFG     0x0102  /* Receiver configuration */
#define PP_RxCFG_Skip1         0x0040  /* Skip (i.e. discard) current frame */
#define PP_RxCFG_Stream        0x0080  /* Enable streaming mode */
#define PP_RxCFG_RxOK          0x0100  /* RxOK interrupt enable */
#define PP_RxCFG_RxDMAonly     0x0200  /* Use RxDMA for all frames */
#define PP_RxCFG_AutoRxDMA     0x0400  /* Select RxDMA automatically */
#define PP_RxCFG_BufferCRC     0x0800  /* Include CRC characters in frame */
#define PP_RxCFG_CRC           0x1000  /* Enable interrupt on CRC error */
#define PP_RxCFG_RUNT          0x2000  /* Enable interrupt on RUNT frames */
#define PP_RxCFG_EXTRA         0x4000  /* Enable interrupt on frames with extra data */

#define PP_RxCTL     0x0104  /* Receiver control */
#define PP_RxCTL_IAHash        0x0040  /* Accept frames that match hash */
#define PP_RxCTL_Promiscuous   0x0080  /* Accept any frame */
#define PP_RxCTL_RxOK          0x0100  /* Accept well formed frames */
#define PP_RxCTL_Multicast     0x0200  /* Accept multicast frames */
#define PP_RxCTL_IA            0x0400  /* Accept frame that matches IA */
#define PP_RxCTL_Broadcast     0x0800  /* Accept broadcast frames */
#define PP_RxCTL_CRC           0x1000  /* Accept frames with bad CRC */
#define PP_RxCTL_RUNT          0x2000  /* Accept runt frames */
#define PP_RxCTL_EXTRA         0x4000  /* Accept frames that are too long */

#define PP_TxCFG     0x0106  /* Transmit configuration */
#define PP_TxCFG_CRS           0x0040  /* Enable interrupt on loss of carrier */
#define PP_TxCFG_SQE           0x0080  /* Enable interrupt on Signal Quality Error */
#define PP_TxCFG_TxOK          0x0100  /* Enable interrupt on successful xmits */
#define PP_TxCFG_Late          0x0200  /* Enable interrupt on "out of window" */
#define PP_TxCFG_Jabber        0x0400  /* Enable interrupt on jabber detect */
#define PP_TxCFG_Collision     0x0800  /* Enable interrupt if collision */
#define PP_TxCFG_16Collisions  0x8000  /* Enable interrupt if > 16 collisions */

#define PP_TxCmd     0x0108  /* Transmit command status */
#define PP_TxCmd_TxStart_5     0x0000  /* Start after 5 bytes in buffer */
#define PP_TxCmd_TxStart_381   0x0040  /* Start after 381 bytes in buffer */
#define PP_TxCmd_TxStart_1021  0x0080  /* Start after 1021 bytes in buffer */
#define PP_TxCmd_TxStart_Full  0x00C0  /* Start after all bytes loaded */
#define PP_TxCmd_Force         0x0100  /* Discard any pending packets */
#define PP_TxCmd_OneCollision  0x0200  /* Abort after a single collision */
#define PP_TxCmd_NoCRC         0x1000  /* Do not add CRC */
#define PP_TxCmd_NoPad         0x2000  /* Do not pad short packets */

#define PP_BufCFG    0x010A  /* Buffer configuration */
#define PP_BufCFG_SWI          0x0040  /* Force interrupt via software */
#define PP_BufCFG_RxDMA        0x0080  /* Enable interrupt on Rx DMA */
#define PP_BufCFG_TxRDY        0x0100  /* Enable interrupt when ready for Tx */
#define PP_BufCFG_TxUE         0x0200  /* Enable interrupt in Tx underrun */
#define PP_BufCFG_RxMiss       0x0400  /* Enable interrupt on missed Rx packets */
#define PP_BufCFG_Rx128        0x0800  /* Enable Rx interrupt after 128 bytes */
#define PP_BufCFG_TxCol        0x1000  /* Enable int on Tx collision ctr overflow */
#define PP_BufCFG_Miss         0x2000  /* Enable int on Rx miss ctr overflow */
#define PP_BufCFG_RxDest       0x8000  /* Enable int on Rx dest addr match */

#define PP_LineCTL   0x0112  /* Line control */
#define PP_LineCTL_Rx          0x0040  /* Enable receiver */
#define PP_LineCTL_Tx          0x0080  /* Enable transmitter */
#define PP_LineCTL_AUIonly     0x0100  /* AUI interface only */
#define PP_LineCTL_AutoAUI10BT 0x0200  /* Autodetect AUI or 10BaseT interface */
#define PP_LineCTL_ModBackoffE 0x0800  /* Enable modified backoff algorithm */
#define PP_LineCTL_PolarityDis 0x1000  /* Disable Rx polarity autodetect */
#define PP_LineCTL_2partDefDis 0x2000  /* Disable two-part defferal */
#define PP_LineCTL_LoRxSquelch 0x4000  /* Reduce receiver squelch threshold */

#define PP_SelfCTL   0x0114  /* Chip self control */
#define PP_SelfCTL_Reset       0x0040  /* Self-clearing reset */
#define PP_SelfCTL_SWSuspend   0x0100  /* Initiate suspend mode */
#define PP_SelfCTL_HWSleepE    0x0200  /* Enable SLEEP input */
#define PP_SelfCTL_HWStandbyE  0x0400  /* Enable standby mode */
#define PP_SelfCTL_HC0E        0x1000  /* use HCB0 for LINK LED */
#define PP_SelfCTL_HC1E        0x2000  /* use HCB1 for BSTATUS LED */
#define PP_SelfCTL_HCB0        0x4000  /* control LINK LED if HC0E set */
#define PP_SelfCTL_HCB1        0x8000  /* control BSTATUS LED if HC1E set */

#define PP_BusCTL    0x0116  /* Bus control */
#define PP_BusCTL_ResetRxDMA   0x0040  /* Reset RxDMA pointer */
#define PP_BusCTL_DMAextend    0x0100  /* Extend DMA cycle */
#define PP_BusCTL_UseSA        0x0200  /* Assert MEMCS16 on address decode */
#define PP_BusCTL_MemoryE      0x0400  /* Enable memory mode */
#define PP_BusCTL_DMAburst     0x0800  /* Limit DMA access burst */
#define PP_BusCTL_IOCHRDYE     0x1000  /* Set IOCHRDY high impedence */
#define PP_BusCTL_RxDMAsize    0x2000  /* Set DMA buffer size 64KB */
#define PP_BusCTL_EnableIRQ    0x8000  /* Generate interrupt on interrupt event */

#define PP_TestCTL   0x0118  /* Test control */
#define PP_TestCTL_DisableLT   0x0080  /* Disable link status */
#define PP_TestCTL_ENDECloop   0x0200  /* Internal loopback */
#define PP_TestCTL_AUIloop     0x0400  /* AUI loopback */
#define PP_TestCTL_DisBackoff  0x0800  /* Disable backoff algorithm */
#define PP_TestCTL_FDX         0x4000  /* Enable full duplex mode */

#define PP_ISQ       0x0120  /* Interrupt Status Queue */

#define PP_RER       0x0124  /* Receive event */
#define PP_RER_IAHash          0x0040  /* Frame hash match */
#define PP_RER_Dribble         0x0080  /* Frame had 1-7 extra bits after last byte */
#define PP_RER_RxOK            0x0100  /* Frame received with no errors */
#define PP_RER_Hashed          0x0200  /* Frame address hashed OK */
#define PP_RER_IA              0x0400  /* Frame address matched IA */
#define PP_RER_Broadcast       0x0800  /* Broadcast frame */
#define PP_RER_CRC             0x1000  /* Frame had CRC error */
#define PP_RER_RUNT            0x2000  /* Runt frame */
#define PP_RER_EXTRA           0x4000  /* Frame was too long */

#define PP_TER       0x0128 /* Transmit event */
#define PP_TER_CRS             0x0040  /* Carrier lost */
#define PP_TER_SQE             0x0080  /* Signal Quality Error */
#define PP_TER_TxOK            0x0100  /* Packet sent without error */
#define PP_TER_Late            0x0200  /* Out of window */
#define PP_TER_Jabber          0x0400  /* Stuck transmit? */
#define PP_TER_NumCollisions   0x7800  /* Number of collisions */
#define PP_TER_16Collisions    0x8000  /* > 16 collisions */

#define PP_BER       0x012C /* Buffer event */
#define PP_BER_SWint           0x0040 /* Software interrupt */
#define PP_BER_RxDMAFrame      0x0080 /* Received framed DMAed */
#define PP_BER_Rdy4Tx          0x0100 /* Ready for transmission */
#define PP_BER_TxUnderrun      0x0200 /* Transmit underrun */
#define PP_BER_RxMiss          0x0400 /* Received frame missed */
#define PP_BER_Rx128           0x0800 /* 128 bytes received */
#define PP_BER_RxDest          0x8000 /* Received framed passed address filter */

#define PP_RxMiss    0x0130  /*  Receiver miss counter */

#define PP_TxCol     0x0132  /*  Transmit collision counter */

#define PP_LineSTAT  0x0134  /* Line status */
#define PP_LineSTAT_LinkOK     0x0080  /* Line is connected and working */
#define PP_LineSTAT_AUI        0x0100  /* Connected via AUI */
#define PP_LineSTAT_10BT       0x0200  /* Connected via twisted pair */
#define PP_LineSTAT_Polarity   0x1000  /* Line polarity OK (10BT only) */
#define PP_LineSTAT_CRS        0x4000  /* Frame being received */

#define PP_SelfSTAT  0x0136  /* Chip self status */
#define PP_SelfSTAT_33VActive  0x0040  /* supply voltage is 3.3V */
#define PP_SelfSTAT_InitD      0x0080  /* Chip initialization complete */
#define PP_SelfSTAT_SIBSY      0x0100  /* EEPROM is busy */
#define PP_SelfSTAT_EEPROM     0x0200  /* EEPROM present */
#define PP_SelfSTAT_EEPROM_OK  0x0400  /* EEPROM checks out */
#define PP_SelfSTAT_ELPresent  0x0800  /* External address latch logic available */
#define PP_SelfSTAT_EEsize     0x1000  /* Size of EEPROM */

#define PP_BusSTAT   0x0138  /* Bus status */
#define PP_BusSTAT_TxBid       0x0080  /* Tx error */
#define PP_BusSTAT_TxRDY       0x0100  /* Ready for Tx data */

#define PP_TDR       0x013C  /* AUI Time Domain Reflectometer */

/* initiate transmit registers */

#define PP_TxCommand 0x0144  /* Tx Command */
#define PP_TxLength  0x0146  /* Tx Length */


/* address filter registers */

#define PP_LAF       0x0150  /* Logical address filter (6 bytes) */
#define PP_IA        0x0158  /* Individual address (MAC) */

/* EEPROM Kram */
#define SI_BUSY 0x0100
#define PP_SelfST 0x0136	/*  Self State register */
#define PP_EECMD 0x0040		/*  NVR Interface Command register */
#define PP_EEData 0x0042	/*  NVR Interface Data Register */
#define EEPROM_WRITE_EN		0x00F0
#define EEPROM_WRITE_DIS	0x0000
#define EEPROM_WRITE_CMD	0x0100
#define EEPROM_READ_CMD		0x0200
#define EEPROM_ERASE_CMD	0x0300

extern int cs8900_e2prom_read(uchar, ushort *);
extern int cs8900_e2prom_write(uchar, ushort);

#endif /* CONFIG_DRIVER_CS8900 */