/* * (C) Copyright 2004 * Texas Instruments. * Richard Woodruff * Kshitij Gupta * * Configuration settings for the 242x TI H4 board. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __CONFIG_H #define __CONFIG_H /* * High Level Configuration Options */ #define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP2420 1 /* which is in a 2420 */ #define CONFIG_OMAP2420H4 1 /* and on a H4 board */ /*#define CONFIG_APTIX 1 #* define if on APTIX test chip */ /*#define CONFIG_VIRTIO 1 #* Using Virtio simulator */ #define CONFIG_STANDALONE_LOAD_ADDR 0x80300000 /* Clock config to target*/ #define PRCM_CONFIG_II 1 /* #define PRCM_CONFIG_III 1 */ #include /* get chip and board defs */ /* On H4, NOR and NAND flash are mutual exclusive. Define this if you want to use NAND */ /*#define CONFIG_SYS_NAND_BOOT */ #ifdef CONFIG_APTIX #define V_SCLK 1500000 #else #define V_SCLK 12000000 #endif /* input clock of PLL */ /* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */ #define CONFIG_SYS_CLK_FREQ V_SCLK #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 #define CONFIG_REVISION_TAG 1 /* * Size of malloc() pool */ #define CONFIG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) /* * Hardware drivers */ /* * SMC91c96 Etherent */ #define CONFIG_LAN91C96 #define CONFIG_LAN91C96_BASE (H4_CS1_BASE+0x300) #define CONFIG_LAN91C96_EXT_PHY /* * NS16550 Configuration */ #ifdef CONFIG_APTIX #define V_NS16550_CLK (6000000) /* 6MHz in current MaxSet */ #else #define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */ #endif #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK /* 3MHz (1.5MHz*2) */ #define CONFIG_SYS_NS16550_COM1 OMAP2420_UART1 /* * select serial console configuration */ #define CONFIG_SERIAL1 1 /* UART1 on H4 */ /* * I2C configuration */ #define CONFIG_HARD_I2C #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SLAVE 1 #define CONFIG_DRIVER_OMAP24XX_I2C /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 /* * Command line configuration. */ #include #ifdef CONFIG_SYS_NAND_BOOT #define CONFIG_CMD_DHCP #define CONFIG_CMD_I2C #define CONFIG_CMD_NAND #define CONFIG_CMD_JFFS2 #else #define CONFIG_CMD_DHCP #define CONFIG_CMD_I2C #define CONFIG_CMD_JFFS2 #undef CONFIG_CMD_SOURCE #endif /* * BOOTP options */ #define CONFIG_BOOTP_SUBNETMASK #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTDELAY 3 #ifdef NFS_BOOT_DEFAULTS #define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200n8 noinitrd root=/dev/nfs rw nfsroot=128.247.77.158:/home/a0384864/wtbu/rootfs ip=dhcp" #else #define CONFIG_BOOTARGS "root=/dev/ram0 rw mem=32M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192" #endif #define CONFIG_NETMASK 255.255.254.0 #define CONFIG_IPADDR 128.247.77.90 #define CONFIG_SERVERIP 128.247.77.158 #define CONFIG_BOOTFILE "uImage" /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #ifdef CONFIG_APTIX # define CONFIG_SYS_PROMPT "OMAP2420 Aptix # " #else # define CONFIG_SYS_PROMPT "OMAP242x H4 # " #endif #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_MEMTEST_START (OMAP2420_SDRC_CS0) /* memtest works on */ #define CONFIG_SYS_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M) #define CONFIG_SYS_LOAD_ADDR (OMAP2420_SDRC_CS0) /* default load address */ /* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by * 32KHz clk, or from external sig. This rate is divided by a local divisor. */ #ifdef CONFIG_APTIX #define V_PTV 3 #else #define V_PTV 7 /* use with 12MHz/128 */ #endif #define CONFIG_SYS_TIMERBASE OMAP2420_GPT2 #define CONFIG_SYS_PTV V_PTV /* 2^(PTV+1) */ #define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) /*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP2420_SDRC_CS0 #define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ #define PHYS_SDRAM_2 OMAP2420_SDRC_CS1 #define PHYS_FLASH_SECT_SIZE SZ_128K #define PHYS_FLASH_1 H4_CS0_BASE /* Flash Bank #1 */ #define PHYS_FLASH_SIZE_1 SZ_32M #define PHYS_FLASH_2 (H4_CS0_BASE+SZ_32M) /* same cs, 2 chips in series */ #define PHYS_FLASH_SIZE_2 SZ_32M #define PHYS_SRAM 0x4020F800 /*----------------------------------------------------------------------- * FLASH and environment organization */ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ #define CONFIG_SYS_MAX_FLASH_SECT (259) /* max number of sectors on one chip */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */ #define CONFIG_SYS_MONITOR_LEN SZ_128K /* Reserve 1 sector */ #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SIZE_1 } #ifdef CONFIG_SYS_NAND_BOOT #define CONFIG_ENV_IS_IN_NAND 1 #define CONFIG_ENV_OFFSET 0x80000 /* environment starts here */ #else #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + SZ_128K) #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE #define CONFIG_ENV_OFFSET ( CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN ) /* Environment after Monitor */ #endif /*----------------------------------------------------------------------- * CFI FLASH driver setup */ #define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */ #define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/mtd/cfi_flash.c */ #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ #define CONFIG_SYS_FLASH_PROTECTION 1 /* Use hardware sector protection */ /* timeout values are in ticks */ #define CONFIG_SYS_FLASH_ERASE_TOUT (100*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ #define CONFIG_SYS_FLASH_WRITE_TOUT (100*CONFIG_SYS_HZ) /* Timeout for Flash Write */ #define CONFIG_SYS_JFFS2_MEM_NAND /* * JFFS2 partitions */ /* No command line, one static partition, whole device */ #undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor1" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 /* mtdparts command line support */ /* Note: fake mtd_id used, no linux mtd map file */ /* #define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor1=omap2420-1" #define MTDPARTS_DEFAULT "mtdparts=omap2420-1:-(jffs2)" */ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_SP_ADDR PHYS_SRAM #endif /* __CONFIG_H */