/* * (C) Copyright 2004 * Texas Instruments. * Richard Woodruff * Kshitij Gupta * * Configuration settings for the phyCORE-i.MX31 board. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __CONFIG_H #define __CONFIG_H #include /* High Level Configuration Options */ #define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ #define CONFIG_MX31 1 /* in a mx31 */ #define CONFIG_MX31_HCLK_FREQ 26000000 #define CONFIG_MX31_CLK32 32000 #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO /* Temporarily disabled */ #if 0 #define CONFIG_OF_LIBFDT 1 #define CONFIG_FIT 1 #define CONFIG_FIT_VERBOSE 1 #endif #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 /* * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 512 * 1024) /* * Hardware drivers */ #define CONFIG_HARD_I2C 1 #define CONFIG_I2C_MXC 1 #define CONFIG_SYS_I2C_MX31_PORT2 1 #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SLAVE 0xfe #define CONFIG_MXC_UART 1 #define CONFIG_SYS_MX31_UART1 1 /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} /*********************************************************** * Command definition ***********************************************************/ #include #define CONFIG_CMD_PING #define CONFIG_CMD_EEPROM #define CONFIG_CMD_I2C #define CONFIG_BOOTDELAY 3 #define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:128k(uboot)ro,1536k(kernel),-(root)" #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_IPADDR 192.168.23.168 #define CONFIG_SERVERIP 192.168.23.2 #define CONFIG_EXTRA_ENV_SETTINGS \ "bootargs_base=setenv bootargs console=ttySMX0,115200\0" \ "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \ "bootargs_flash=setenv bootargs $(bootargs) root=/dev/mtdblock2 rootfstype=jffs2" \ "bootargs_mtd=setenv bootargs $(bootargs) $(mtdparts)" \ "bootcmd=run bootcmd_net\0" \ "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; tftpboot 0x80000000 $(uimage); bootm\0" \ "bootcmd_flash=run bootargs_base bootargs_mtd bootargs_flash; bootm 0x80000000\0" \ "unlock=yes\0" \ "mtdparts=" MTDPARTS_DEFAULT "\0" \ "prg_uboot=tftpboot 0x80000000 $(uboot); protect off 0xa0000000 +0x20000; erase 0xa0000000 +0x20000; cp.b 0x80000000 0xa0000000 $(filesize)\0" \ "prg_kernel=tftpboot 0x80000000 $(uimage); erase 0xa0040000 +0x180000; cp.b 0x80000000 0xa0040000 $(filesize)\0" \ "prg_jffs2=tftpboot 0x80000000 $(jffs2); erase 0xa01c0000 0xa1ffffff; cp.b 0x80000000 0xa01c0000 $(filesize)\0" \ "videomode=video=ctfb:x:240,y:320,depth:16,mode:0,pclk:185925,le:9,ri:17,up:7,lo:10,hs:1,vs:1,sync:1241513985,vmode:0\0" #define CONFIG_SMC911X 1 #define CONFIG_SMC911X_BASE 0xa8000000 #define CONFIG_SMC911X_32_BIT 1 /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT "uboot> " #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x10000 #define CONFIG_SYS_LOAD_ADDR 0 /* default load address */ #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING 1 /*----------------------------------------------------------------------- * Stack sizes * * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ /*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 0x80000000 #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_SYS_TEXT_BASE 0xA0000000 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ CONFIG_SYS_GBL_DATA_OFFSET) /*----------------------------------------------------------------------- * FLASH and environment organization */ #define CONFIG_SYS_FLASH_BASE 0xa0000000 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ #define CONFIG_SYS_MAX_FLASH_SECT 259 /* max number of sectors on one chip */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */ #define CONFIG_ENV_IS_IN_EEPROM 1 #define CONFIG_ENV_OFFSET 0x00 /* environment starts here */ #define CONFIG_ENV_SIZE 4096 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* 5 bits = 32 octets */ #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* between stop and start */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* length of byte address */ /*----------------------------------------------------------------------- * CFI FLASH driver setup */ #define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */ #define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ #define CONFIG_SYS_FLASH_PROTECTION 1 /* Use hardware sector protection */ /* timeout values are in ticks */ #define CONFIG_SYS_FLASH_ERASE_TOUT (100*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ #define CONFIG_SYS_FLASH_WRITE_TOUT (100*CONFIG_SYS_HZ) /* Timeout for Flash Write */ /* * JFFS2 partitions */ #undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" /* EET platform additions */ #ifdef CONFIG_IMX31_PHYCORE_EET #define BOARD_LATE_INIT #define CONFIG_MXC_GPIO #define CONFIG_HARD_SPI 1 #define CONFIG_MXC_SPI 1 #define CONFIG_CMD_SPI #define CONFIG_S6E63D6 1 #define CONFIG_VIDEO #define CONFIG_CFB_CONSOLE #define CONFIG_VIDEO_MX3 #define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_SW_CURSOR #define CONFIG_VGA_AS_SINGLE_DEVICE #define CONFIG_SYS_CONSOLE_IS_IN_ENV #define CONFIG_SPLASH_SCREEN #define CONFIG_CMD_BMP #define CONFIG_BMP_16BPP #endif #endif /* __CONFIG_H */