/* * (C) Copyright 2005 * Thomas.Lange@corelatus.se * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ /* * This file contains the configuration parameters for the gth2 board. */ #ifndef __CONFIG_H #define __CONFIG_H #define CONFIG_MIPS32 1 /* MIPS32 CPU core */ #define CONFIG_GTH2 1 #define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */ #define CONFIG_SOC_AU1000 1 #define CONFIG_MISC_INIT_R 1 #define CONFIG_ETHADDR DE:AD:BE:EF:01:02 /* Ethernet address */ #define CONFIG_BOOTDELAY 1 /* autoboot after 1 seconds */ #define CONFIG_ENV_OVERWRITE 1 /* Allow change of ethernet address */ #define CONFIG_BOOT_RETRY_TIME 5 /* Retry boot in 5 secs */ #define CONFIG_RESET_TO_RETRY 1 /* If timeout waiting for command, perform a reset */ #define CONFIG_BAUDRATE 115200 /* valid baudrates */ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* Only interrupt boot if space is pressed */ /* If a long serial cable is connected but */ /* other end is dead, garbage will be read */ #define CONFIG_AUTOBOOT_KEYED 1 #define CONFIG_AUTOBOOT_PROMPT \ "Press space to abort autoboot in %d second\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "d" #define CONFIG_AUTOBOOT_STOP_STR " " #define CONFIG_TIMESTAMP /* Print image info with timestamp */ #define CONFIG_BOOTARGS "panic=1" #define CONFIG_EXTRA_ENV_SETTINGS \ "addmisc=setenv bootargs $(bootargs) " \ "ethaddr=$(ethaddr) \0" \ "netboot=bootp;run addmisc;bootm\0" \ "" /* Boot from Compact flash partition 2 as default */ #define CONFIG_BOOTCOMMAND "ide reset;disk 0x81000000 0:2;run addmisc;bootm" /* * BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME /* * Command line configuration. */ #include #define CONFIG_CMD_IDE #define CONFIG_CMD_DHCP #undef CONFIG_CMD_BDI #undef CONFIG_CMD_BEDBUG #undef CONFIG_CMD_ELF #undef CONFIG_CMD_FAT #undef CONFIG_CMD_FLASH #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_LOADB #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_MII #undef CONFIG_CMD_NFS #undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_SOURCE /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT "GTH2 # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args*/ #define CONFIG_SYS_MALLOC_LEN 128*1024 #define CONFIG_SYS_BOOTPARAMS_LEN 128*1024 #define CONFIG_SYS_MHZ 500 #define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) #define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */ #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* default load address */ #define CONFIG_SYS_MEMTEST_START 0x80100000 #define CONFIG_SYS_MEMTEST_END 0x83000000 #define CONFIG_HW_WATCHDOG 1 /*----------------------------------------------------------------------- * FLASH and environment organization */ #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ #define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ #define PHYS_FLASH 0xbfc00000 /* Flash Bank #1 */ /* The following #defines are needed to get flash environment right */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MONITOR_LEN (192 << 10) #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 /* We boot from this flash, selected with dip switch */ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH /* timeout values are in ticks */ #define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */ #define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */ #define CONFIG_ENV_IS_NOWHERE 1 /* Address and size of Primary Environment Sector */ #define CONFIG_ENV_ADDR 0xB0030000 #define CONFIG_ENV_SIZE 0x10000 #define CONFIG_FLASH_16BIT #define CONFIG_NR_DRAM_BANKS 2 #define CONFIG_MEMSIZE_IN_BYTES /*---ATA PCMCIA ------------------------------------*/ #define CONFIG_SYS_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */ #define CONFIG_SYS_PCMCIA_MEM_ADDR 0x20000000 #define CONFIG_SYS_PCMCIA_IO_BASE 0x28000000 #define CONFIG_SYS_PCMCIA_ATTR_BASE 0x30000000 #define CONFIG_PCMCIA_SLOT_A #define CONFIG_ATAPI 1 #define CONFIG_MAC_PARTITION 1 /* We run CF in "true ide" mode or a harddrive via pcmcia */ #define CONFIG_IDE_PCMCIA 1 /* We only support one slot for now */ #define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ #define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ #undef CONFIG_IDE_LED /* LED for ide not supported */ #undef CONFIG_IDE_RESET /* reset for ide not supported */ #define CONFIG_SYS_ATA_IDE0_OFFSET 0 #define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_IO_BASE /* Offset for data I/O */ #define CONFIG_SYS_ATA_DATA_OFFSET 0 /* Offset for normal register accesses */ #define CONFIG_SYS_ATA_REG_OFFSET 0 /* Offset for alternate registers */ #define CONFIG_SYS_ATA_ALT_OFFSET 0x0200 /*----------------------------------------------------------------------- * Cache Configuration */ #define CONFIG_SYS_DCACHE_SIZE 16384 #define CONFIG_SYS_ICACHE_SIZE 16384 #define CONFIG_SYS_CACHELINE_SIZE 32 #define GPIO_CACONFIG (1<<0) #define GPIO_DPACONFIG (1<<6) #define GPIO_ERESET (1<<11) #define GPIO_EEDQ (1<<17) #define GPIO_WDI (1<<18) #define GPIO_RJ1LY (1<<22) #define GPIO_RJ1LG (1<<23) #define GPIO_LEDCLK (1<<29) #define GPIO_LEDD (1<<30) #define GPIO_CPU_LED (1<<31) #endif /* __CONFIG_H */