/* * Copyright (C) 2003-2004 Arabella Software Ltd. * Yuli Barcohen * * U-Boot configuration for Zephyr Engineering ZPC.1900 board. * This port was developed and tested on Revision C board. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __CONFIG_H #define __CONFIG_H #define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_ZPC1900 1 /* ...on Zephyr ZPC.1900 board */ #define CPU_ID_STR "MPC8265" #undef DEBUG #undef CONFIG_BOARD_EARLY_INIT_F /* Don't call board_early_init_f */ /* Allow serial number (serial) and MAC address (ethaddr) to be overwritten */ #define CONFIG_ENV_OVERWRITE /* * Select serial console configuration * * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 * for SCC). */ #define CONFIG_CONS_ON_SMC /* Console is on SMC */ #undef CONFIG_CONS_ON_SCC /* It's not on SCC */ #undef CONFIG_CONS_NONE /* It's not on external UART */ #define CONFIG_CONS_INDEX 1 /* SMC1 is used for console */ /* * Select ethernet configuration * * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for * SCC, 1-3 for FCC) * * If CONFIG_ETHER_NONE is defined, then either the ethernet routines * must be defined elsewhere (as for the console), or CFG_CMD_NET must * be removed from CONFIG_COMMANDS to remove support for networking. */ #undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */ #define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */ #undef CONFIG_ETHER_NONE /* No external Ethernet */ #ifdef CONFIG_ETHER_ON_FCC #define CONFIG_ETHER_INDEX 2 /* FCC2 is used for Ethernet */ #if (CONFIG_ETHER_INDEX == 2) /* * - Rx clock is CLK13 * - Tx clock is CLK14 * - Select bus for bd/buffers (see 28-13) * - Full duplex */ # define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) # define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) # define CFG_CPMFCR_RAMTYPE 0 # define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) #endif /* CONFIG_ETHER_INDEX */ #define CONFIG_MII /* MII PHY management */ #define CONFIG_BITBANGMII /* Bit-banged MDIO interface */ /* * GPIO pins used for bit-banged MII communications */ #define MDIO_PORT 2 /* Port C */ #define MDIO_ACTIVE (iop->pdir |= 0x00400000) #define MDIO_TRISTATE (iop->pdir &= ~0x00400000) #define MDIO_READ ((iop->pdat & 0x00400000) != 0) #define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \ else iop->pdat &= ~0x00400000 #define MDC(bit) if(bit) iop->pdat |= 0x00200000; \ else iop->pdat &= ~0x00200000 #define MIIDELAY udelay(1) #endif /* CONFIG_ETHER_ON_FCC */ #ifndef CONFIG_8260_CLKIN #define CONFIG_8260_CLKIN 66666666 /* in Hz */ #endif #define CONFIG_BAUDRATE 38400 #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ | CFG_CMD_ASKENV \ | CFG_CMD_DHCP \ | CFG_CMD_ECHO \ | CFG_CMD_IMMAP \ | CFG_CMD_MII \ | CFG_CMD_PING \ ) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOOTCOMMAND "dhcp;bootm" /* autoboot command */ #define CONFIG_BOOTARGS "root=/dev/nfs rw ip=:::::eth0:dhcp" #if (CONFIG_COMMANDS & CFG_CMD_KGDB) #undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ #define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ #undef CONFIG_KGDB_NONE /* define if kgdb on something else */ #define CONFIG_KGDB_INDEX 2 /* which serial channel for kgdb */ #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */ #endif #define CONFIG_BZIP2 /* include support for bzip2 compressed images */ #undef CONFIG_WATCHDOG /* disable platform specific watchdog */ /* * Miscellaneous configurable options */ #define CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_MEMTEST_START 0x00100000 /* memtest works on */ #define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ #define CFG_LOAD_ADDR 0x100000 /* default load address */ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } #define CFG_FLASH_BASE 0xFFE00000 #define CFG_FLASH_CFI #define CFG_FLASH_CFI_DRIVER #define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CFG_MAX_FLASH_SECT 32 /* max num of sects on one chip */ #define CFG_DEFAULT_IMMR 0x0F010000 #define CFG_IMMR 0xF0000000 #define CFG_SDRAM_BASE 0x00000000 #define CFG_SDRAM_SIZE 64 #define CFG_FLSIMM_BASE 0xFC000000 #define CFG_LSDRAM_BASE 0xFE000000 #define CFG_BCSR 0xFEA00000 #define CFG_EEPROM 0xFEB00000 #define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } #define BCSR_PCI_MODE 0x01 #define CFG_INIT_RAM_ADDR CFG_IMMR #define CFG_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET /* Hard reset configuration word */ #define CFG_HRCW_MASTER (HRCW_EBM | HRCW_BPS01| HRCW_CIP |\ HRCW_L2CPC10 | HRCW_DPPC00 | HRCW_ISB010 |\ HRCW_BMS | HRCW_LBPC01 | HRCW_APPC10 |\ HRCW_MODCK_H0101 \ ) /* 0x16828605 */ /* No slaves */ #define CFG_HRCW_SLAVE1 0 #define CFG_HRCW_SLAVE2 0 #define CFG_HRCW_SLAVE3 0 #define CFG_HRCW_SLAVE4 0 #define CFG_HRCW_SLAVE5 0 #define CFG_HRCW_SLAVE6 0 #define CFG_HRCW_SLAVE7 0 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ #define CFG_MONITOR_BASE TEXT_BASE #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) #define CFG_RAMBOOT #endif #define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ #define CFG_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ #if !defined(CFG_ENV_IS_IN_FLASH) && !defined(CFG_ENV_IS_IN_NVRAM) #define CFG_ENV_IS_IN_NVRAM 1 #endif #ifdef CFG_ENV_IS_IN_FLASH # define CFG_ENV_SECT_SIZE 0x10000 # define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) #else # define CFG_ENV_ADDR (CFG_EEPROM + 0x400) # define CFG_ENV_SIZE 0x1000 # define CFG_NVRAM_ACCESS_ROUTINE #endif #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif #define CFG_HID0_INIT 0 #define CFG_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE ) #define CFG_HID2 0 #define CFG_SIUMCR 0x42200000 #define CFG_SYPCR 0xFFFFFFC3 #define CFG_BCR 0x90400000 #define CFG_SCCR SCCR_DFBRG01 #define CFG_RMR RMR_CSRE #define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) #define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) #define CFG_RCCR 0 #define CFG_PSDMR 0x014EB45A #define CFG_PSRT 0x0C #define CFG_LSDMR 0x008AB552 #define CFG_LSRT 0x0E #define CFG_MPTPR 0x4000 #define CFG_BR0_PRELIM CFG_FLASH_BASE | 0x00000801 #define CFG_OR0_PRELIM 0xFFE00856 #define CFG_BR5_PRELIM CFG_EEPROM | 0x00000801 #define CFG_OR5_PRELIM 0xFFFF03F6 #define CFG_BR6_PRELIM CFG_FLSIMM_BASE | 0x00000801 #define CFG_OR6_PRELIM 0xFE000856 #define CFG_BR7_PRELIM CFG_BCSR | 0x00000801 #define CFG_OR7_PRELIM 0xFFFF83F6 #define CFG_RESET_ADDRESS 0xC0000000 #endif /* __CONFIG_H */