/* * (C) Copyright 2004 * Texas Instruments, * Richard Woodruff * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include #include /* get mem tables */ #include #include #include /************************************************************************** * get_prod_id() - get id info from chips ***************************************************************************/ static u32 get_prod_id(void) { u32 p; p = __raw_readl(PRODUCTION_ID); /* get production ID */ return((p & CPU_242X_PID_MASK) >> 16); } /************************************************************************** * get_cpu_type() - low level get cpu type * - no C globals yet. * - just looking to say if this is a 2422 or 2420 or ... * - to start with we will look at switch settings.. * - 2422 id's same as 2420 for ES1 will rely on H4 board characteristics * (mux for 2420, non-mux for 2422). ***************************************************************************/ u32 get_cpu_type(void) { u32 v; switch(get_prod_id()){ case 1:;/* 2420 */ case 2: return(CPU_2420); break; /* 2420 pop */ case 4: return(CPU_2422); break; case 8: return(CPU_2423); break; default: break; /* early 2420/2422's unmarked */ } v = __raw_readl(TAP_IDCODE_REG); v &= CPU_24XX_ID_MASK; if (v == CPU_2420_CHIPID) { /* currently 2420 and 2422 have same id */ if (is_gpmc_muxed() == GPMC_MUXED) /* if mux'ed */ return(CPU_2420); else return(CPU_2422); } else return(CPU_2420); /* don't know, say 2420 */ } /****************************************** * get_cpu_rev(void) - extract version info ******************************************/ u32 get_cpu_rev(void) { u32 v; v = __raw_readl(TAP_IDCODE_REG); v = v >> 28; return(v+1); /* currently 2422 and 2420 match up */ } /**************************************************** * is_mem_sdr() - return 1 if mem type in use is SDR ****************************************************/ u32 is_mem_sdr(void) { volatile u32 *burst = (volatile u32 *)(SDRC_MR_0+SDRC_CS0_OSET); if(*burst == H4_2420_SDRC_MR_0_SDR) return(1); return(0); } /*********************************************************** * get_mem_type() - identify type of mDDR part used. * 2422 uses stacked DDR, 2 parts CS0/CS1. * 2420 may have 1 or 2, no good way to know...only init 1... * when eeprom data is up we can select 1 more. *************************************************************/ u32 get_mem_type(void) { u32 cpu, sdr = is_mem_sdr(); cpu = get_cpu_type(); if (cpu == CPU_2422 || cpu == CPU_2423) return(DDR_STACKED); if(get_prod_id() == 0x2) return(XDR_POP); if (get_board_type() == BOARD_H4_MENELAUS) if(sdr) return(SDR_DISCRETE); else return(DDR_COMBO); else if(sdr) /* SDP + SDR kit */ return(SDR_DISCRETE); else return(DDR_DISCRETE); /* origional SDP */ } /*********************************************************************** * get_cs0_size() - get size of chip select 0/1 ************************************************************************/ u32 get_sdr_cs_size(u32 offset) { u32 size; size = __raw_readl(SDRC_MCFG_0+offset) >> 8; /* get ram size field */ size &= 0x2FF; /* remove unwanted bits */ size *= SZ_2M; /* find size in MB */ return(size); } /*********************************************************************** * get_board_type() - get board type based on current production stats. * --- NOTE: 2 I2C EEPROMs will someday be populated with proper info. * when they are available we can get info from there. This should * be correct of all known boards up until today. ************************************************************************/ u32 get_board_type(void) { if (i2c_probe(I2C_MENELAUS) == 0) return(BOARD_H4_MENELAUS); else return(BOARD_H4_SDP); } /****************************************************************** * get_sysboot_value() - get init word settings (dip switch on h4) ******************************************************************/ inline u32 get_sysboot_value(void) { return(0x00000FFF & __raw_readl(CONTROL_STATUS)); } /*************************************************************************** * get_gpmc0_base() - Return current address hardware will be * fetching from. The below effectively gives what is correct, its a bit * mis-leading compared to the TRM. For the most general case the mask * needs to be also taken into account this does work in practice. * - for u-boot we currently map: * -- 0 to nothing, * -- 4 to flash * -- 8 to enent * -- c to wifi ****************************************************************************/ u32 get_gpmc0_base(void) { u32 b; b = __raw_readl(GPMC_CONFIG7_0); b &= 0x1F; /* keep base [5:0] */ b = b << 24; /* ret 0x0b000000 */ return(b); } /***************************************************************** * is_gpmc_muxed() - tells if address/data lines are multiplexed *****************************************************************/ u32 is_gpmc_muxed(void) { u32 mux; mux = get_sysboot_value(); if ((mux & (BIT0 | BIT1 | BIT2 | BIT3)) == (BIT0 | BIT2 | BIT3)) return(GPMC_MUXED); /* NAND Boot mode */ if (mux & BIT1) /* if mux'ed */ return(GPMC_MUXED); else return(GPMC_NONMUXED); } /************************************************************************ * get_gpmc0_type() - read sysboot lines to see type of memory attached ************************************************************************/ u32 get_gpmc0_type(void) { u32 type; type = get_sysboot_value(); if ((type & (BIT3|BIT2)) == (BIT3|BIT2)) return(TYPE_NAND); else return(TYPE_NOR); } /******************************************************************* * get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand) *******************************************************************/ u32 get_gpmc0_width(void) { u32 width; width = get_sysboot_value(); if ((width & 0xF) == (BIT3|BIT2)) return(WIDTH_8BIT); else return(WIDTH_16BIT); } /********************************************************************* * wait_on_value() - common routine to allow waiting for changes in * volatile regs. *********************************************************************/ u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound) { u32 i = 0, val; do { ++i; val = __raw_readl(read_addr) & read_bit_mask; if (val == match_value) return(1); if (i==bound) return(0); } while (1); } /********************************************************************* * display_board_info() - print banner with board info. *********************************************************************/ void display_board_info(u32 btype) { char cpu_2420[] = "2420"; /* cpu type */ char cpu_2422[] = "2422"; char cpu_2423[] = "2423"; char db_men[] = "Menelaus"; /* board type */ char db_ip[] = "IP"; char mem_sdr[] = "mSDR"; /* memory type */ char mem_ddr[] = "mDDR"; char t_tst[] = "TST"; /* security level */ char t_emu[] = "EMU"; char t_hs[] = "HS"; char t_gp[] = "GP"; char unk[] = "?"; char *cpu_s, *db_s, *mem_s, *sec_s; u32 cpu, rev, sec; rev = get_cpu_rev(); cpu = get_cpu_type(); sec = get_device_type(); if(is_mem_sdr()) mem_s = mem_sdr; else mem_s = mem_ddr; if(cpu == CPU_2423) cpu_s = cpu_2423; else if (cpu == CPU_2422) cpu_s = cpu_2422; else cpu_s = cpu_2420; if(btype == BOARD_H4_MENELAUS) db_s = db_men; else db_s = db_ip; switch(sec){ case TST_DEVICE: sec_s = t_tst; break; case EMU_DEVICE: sec_s = t_emu; break; case HS_DEVICE: sec_s = t_hs; break; case GP_DEVICE: sec_s = t_gp; break; default: sec_s = unk; } printf("OMAP%s-%s revision %d\n", cpu_s, sec_s, rev-1); printf("TI H4 SDP Base Board + %s Daughter Board + %s \n", db_s, mem_s); } /************************************************************************* * get_board_rev() - setup to pass kernel board revision information * 0 = 242x IP platform (first 2xx boards) * 1 = 242x Menelaus platfrom. *************************************************************************/ u32 get_board_rev(void) { u32 rev = 0; u32 btype = get_board_type(); if (btype == BOARD_H4_MENELAUS){ rev = 1; } return(rev); } /******************************************************** * get_base(); get upper addr of current execution *******************************************************/ u32 get_base(void) { u32 val; __asm__ __volatile__("mov %0, pc \n" : "=r" (val) : : "memory"); val &= 0xF0000000; val >>= 28; return(val); } /******************************************************** * get_base2(); get 2upper addr of current execution *******************************************************/ u32 get_base2(void) { u32 val; __asm__ __volatile__("mov %0, pc \n" : "=r" (val) : : "memory"); val &= 0xFF000000; val >>= 24; return(val); } /******************************************************** * running_in_flash() - tell if currently running in * flash. *******************************************************/ u32 running_in_flash(void) { if (get_base() < 4) return(1); /* in flash */ return(0); /* running in SRAM or SDRAM */ } /******************************************************** * running_in_sram() - tell if currently running in * sram. *******************************************************/ u32 running_in_sram(void) { if (get_base() == 4) return(1); /* in SRAM */ return(0); /* running in FLASH or SDRAM */ } /******************************************************** * running_in_sdram() - tell if currently running in * flash. *******************************************************/ u32 running_in_sdram(void) { if (get_base() > 4) return(1); /* in sdram */ return(0); /* running in SRAM or FLASH */ } /************************************************************* * running_from_internal_boot() - am I a signed NOR image. *************************************************************/ u32 running_from_internal_boot(void) { u32 v, base; v = get_sysboot_value() & BIT3; base = get_base2(); /* if running at mask rom flash address and * sysboot3 says this was an internal boot */ if ((base == 0x08) && v) return(1); else return(0); } /************************************************************* * get_device_type(): tell if GP/HS/EMU/TST *************************************************************/ u32 get_device_type(void) { int mode; mode = __raw_readl(CONTROL_STATUS) & (BIT10|BIT9|BIT8); return(mode >>= 8); }