/* * (C) Copyright 2007-2008 * Stelian Pop * Lead Tech Design * Copyright (C) 2008 Ronetix Ilko Iliev (www.ronetix.at) * Copyright (C) 2009 Jean-Christopher PLAGNIOL-VILLARD * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_DRIVER_DM9000) #include #endif #include DECLARE_GLOBAL_DATA_PTR; /* ------------------------------------------------------------------------- */ /* * Miscelaneous platform dependent initialisations */ #ifdef CONFIG_CMD_NAND static void pm9261_nand_hw_init(void) { unsigned long csa; /* Enable CS3 */ csa = at91_sys_read(AT91_MATRIX_EBICSA); at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); /* Configure SMC CS3 for NAND/SmartMedia */ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); at91_sys_write(AT91_SMC_MODE(3), AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | #ifdef CONFIG_SYS_NAND_DBW_16 AT91_SMC_DBW_16 | #else /* CONFIG_SYS_NAND_DBW_8 */ AT91_SMC_DBW_8 | #endif AT91_SMC_TDF_(2)); /* Configure RDY/BSY */ at91_set_gpio_input(AT91_PIN_PA16, 1); /* Enable NandFlash */ at91_set_gpio_output(AT91_PIN_PC14, 1); at91_set_A_periph(AT91_PIN_PC0, 0); /* NANDOE */ at91_set_A_periph(AT91_PIN_PC1, 0); /* NANDWE */ } #endif #ifdef CONFIG_DRIVER_DM9000 static void pm9261_dm9000_hw_init(void) { /* Configure SMC CS2 for DM9000 */ at91_sys_write(AT91_SMC_SETUP(2), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0)); at91_sys_write(AT91_SMC_PULSE(2), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(8) | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(8)); at91_sys_write(AT91_SMC_CYCLE(2), AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16)); at91_sys_write(AT91_SMC_MODE(2), AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 | AT91_SMC_TDF_(1)); /* Configure Interrupt pin as input, no pull-up */ at91_set_gpio_input(AT91_PIN_PA24, 0); } #endif #ifdef CONFIG_LCD vidinfo_t panel_info = { vl_col: 240, vl_row: 320, vl_clk: 4965000, vl_sync: ATMEL_LCDC_INVLINE_INVERTED | ATMEL_LCDC_INVFRAME_INVERTED, vl_bpix: 3, vl_tft: 1, vl_hsync_len: 5, vl_left_margin: 1, vl_right_margin:33, vl_vsync_len: 1, vl_upper_margin:1, vl_lower_margin:0, mmio: AT91SAM9261_LCDC_BASE, }; void lcd_enable(void) { at91_set_gpio_value(AT91_PIN_PA22, 0); /* power up */ } void lcd_disable(void) { at91_set_gpio_value(AT91_PIN_PA22, 1); /* power down */ } static void pm9261_lcd_hw_init(void) { at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */ at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */ at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */ at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */ at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */ at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */ at91_set_A_periph(AT91_PIN_PB9, 0); /* LCDD4 */ at91_set_A_periph(AT91_PIN_PB10, 0); /* LCDD5 */ at91_set_A_periph(AT91_PIN_PB11, 0); /* LCDD6 */ at91_set_A_periph(AT91_PIN_PB12, 0); /* LCDD7 */ at91_set_A_periph(AT91_PIN_PB15, 0); /* LCDD10 */ at91_set_A_periph(AT91_PIN_PB16, 0); /* LCDD11 */ at91_set_A_periph(AT91_PIN_PB17, 0); /* LCDD12 */ at91_set_A_periph(AT91_PIN_PB18, 0); /* LCDD13 */ at91_set_A_periph(AT91_PIN_PB19, 0); /* LCDD14 */ at91_set_A_periph(AT91_PIN_PB20, 0); /* LCDD15 */ at91_set_B_periph(AT91_PIN_PB23, 0); /* LCDD18 */ at91_set_B_periph(AT91_PIN_PB24, 0); /* LCDD19 */ at91_set_B_periph(AT91_PIN_PB25, 0); /* LCDD20 */ at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */ at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */ at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */ at91_sys_write(AT91_PMC_SCER, AT91_PMC_HCK1); gd->fb_base = AT91SAM9261_SRAM_BASE; } #ifdef CONFIG_LCD_INFO #include #include extern flash_info_t flash_info[]; void lcd_show_board_info(void) { ulong dram_size, nand_size, flash_size, dataflash_size; int i; char temp[32]; lcd_printf ("%s\n", U_BOOT_VERSION); lcd_printf ("(C) 2009 Ronetix GmbH\n"); lcd_printf ("support@ronetix.at\n"); lcd_printf ("%s CPU at %s MHz", AT91_CPU_NAME, strmhz(temp, get_cpu_clk_rate())); dram_size = 0; for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) dram_size += gd->bd->bi_dram[i].size; nand_size = 0; for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) nand_size += nand_info[i].size; flash_size = 0; for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) flash_size += flash_info[i].size; dataflash_size = 0; for (i = 0; i < CONFIG_SYS_MAX_DATAFLASH_BANKS; i++) dataflash_size += (unsigned int) dataflash_info[i].Device.pages_number * dataflash_info[i].Device.pages_size; lcd_printf ("%ld MB SDRAM, %ld MB NAND\n%ld MB NOR Flash\n" "%ld MB DataFlash\n", dram_size >> 20, nand_size >> 20, flash_size >> 20, dataflash_size >> 20); } #endif /* CONFIG_LCD_INFO */ #endif /* CONFIG_LCD */ int board_init(void) { /* Enable Ctrlc */ console_init_f(); at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOA); at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOC); /* arch number of PM9261-Board */ gd->bd->bi_arch_number = MACH_TYPE_PM9261; /* adress of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; at91_serial_hw_init(); #ifdef CONFIG_CMD_NAND pm9261_nand_hw_init(); #endif #ifdef CONFIG_HAS_DATAFLASH at91_spi0_hw_init(1 << 0); #endif #ifdef CONFIG_DRIVER_DM9000 pm9261_dm9000_hw_init(); #endif #ifdef CONFIG_LCD pm9261_lcd_hw_init(); #endif return 0; } int dram_init(void) { gd->bd->bi_dram[0].start = PHYS_SDRAM; gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; return 0; } #ifdef CONFIG_RESET_PHY_R void reset_phy(void) { #ifdef CONFIG_DRIVER_DM9000 /* * Initialize ethernet HW addr prior to starting Linux, * needed for nfsroot */ eth_init(gd->bd); #endif } #endif #ifdef CONFIG_DISPLAY_BOARDINFO int checkboard (void) { char buf[32]; printf ("Board : Ronetix PM9261\n"); printf ("Crystal frequency: %8s MHz\n", strmhz(buf, get_main_clk_rate())); printf ("CPU clock : %8s MHz\n", strmhz(buf, get_cpu_clk_rate())); printf ("Master clock : %8s MHz\n", strmhz(buf, get_mck_clk_rate())); return 0; } #endif