/* * Copyright (C) 2004 Arabella Software Ltd. * Yuli Barcohen * * Support for Interphase iSPAN Communications Controllers * (453x and others). Tested on 4532. * * Derived from iSPAN 4539 port (iphase4539) by * Wolfgang Grandegger * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include /* * I/O Ports configuration table * * If conf is 1, then that port pin will be configured at boot time * according to the five values podr/pdir/ppar/psor/pdat for that entry */ #define CONFIG_SYS_FCC1 (CONFIG_ETHER_INDEX == 1) #define CONFIG_SYS_FCC2 (CONFIG_ETHER_INDEX == 2) #define CONFIG_SYS_FCC3 (CONFIG_ETHER_INDEX == 3) const iop_conf_t iop_conf_tab[4][32] = { /* Port A */ { /* conf ppar psor pdir podr pdat */ /* PA31 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII COL */ /* PA30 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII CRS */ /* PA29 */ { CONFIG_SYS_FCC1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_ER */ /* PA28 */ { CONFIG_SYS_FCC1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_EN */ /* PA27 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_DV */ /* PA26 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_ER */ /* PA25 */ { 0, 0, 0, 0, 0, 0 }, /* PA25 */ /* PA24 */ { 0, 0, 0, 0, 0, 0 }, /* PA24 */ /* PA23 */ { 0, 0, 0, 0, 0, 0 }, /* PA23 */ /* PA22 */ { 0, 0, 0, 0, 0, 0 }, /* PA22 */ /* PA21 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[3] */ /* PA20 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[2] */ /* PA19 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[1] */ /* PA18 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[0] */ /* PA17 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[0] */ /* PA16 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[1] */ /* PA15 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[2] */ /* PA14 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[3] */ /* PA13 */ { 0, 0, 0, 0, 0, 0 }, /* PA13 */ /* PA12 */ { 0, 0, 0, 0, 0, 0 }, /* PA12 */ /* PA11 */ { 0, 0, 0, 0, 0, 0 }, /* PA11 */ /* PA10 */ { 0, 0, 0, 0, 0, 0 }, /* PA10 */ /* PA9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC2 SMTXD */ /* PA8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC2 SMRXD */ /* PA7 */ { 0, 0, 0, 0, 0, 0 }, /* PA7 */ /* PA6 */ { 0, 0, 0, 0, 0, 0 }, /* PA6 */ /* PA5 */ { 0, 0, 0, 0, 0, 0 }, /* PA5 */ /* PA4 */ { 0, 0, 0, 0, 0, 0 }, /* PA4 */ /* PA3 */ { 0, 0, 0, 0, 0, 0 }, /* PA3 */ /* PA2 */ { 0, 0, 0, 0, 0, 0 }, /* PA2 */ /* PA1 */ { 0, 0, 0, 0, 0, 0 }, /* PA1 */ /* PA0 */ { 0, 0, 0, 0, 0, 0 } /* PA0 */ }, /* Port B */ { /* conf ppar psor pdir podr pdat */ /* PB31 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ /* PB30 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ /* PB29 */ { CONFIG_SYS_FCC2, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ /* PB28 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ /* PB27 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ /* PB26 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ /* PB25 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ /* PB24 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ /* PB23 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ /* PB22 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ /* PB21 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ /* PB20 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ /* PB19 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ /* PB18 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ /* PB17 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_DV */ /* PB16 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_ER */ /* PB15 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3 MII TX_ER */ /* PB14 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3 MII TX_EN */ /* PB13 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII COL */ /* PB12 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII CRS */ /* PB11 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[3] */ /* PB10 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[2] */ /* PB9 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[1] */ /* PB8 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[0] */ /* PB7 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[0] */ /* PB6 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[1] */ /* PB5 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[2] */ /* PB4 */ { CONFIG_SYS_FCC3, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[3] */ /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ }, /* Port C */ { /* conf ppar psor pdir podr pdat */ /* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* PC31 */ /* PC30 */ { 0, 0, 0, 0, 0, 0 }, /* PC30 */ /* PC29 */ { 0, 0, 0, 0, 0, 0 }, /* PC29 */ /* PC28 */ { 0, 0, 0, 0, 0, 0 }, /* PC28 */ /* PC27 */ { 0, 0, 0, 0, 0, 0 }, /* PC27 */ /* PC26 */ { 0, 0, 0, 0, 0, 0 }, /* PC26 */ /* PC25 */ { 0, 0, 0, 0, 0, 0 }, /* PC25 */ /* PC24 */ { 0, 0, 0, 0, 0, 0 }, /* PC24 */ /* PC23 */ { 0, 0, 0, 0, 0, 0 }, /* PC23 */ /* PC22 */ { 0, 0, 0, 0, 0, 0 }, /* PC22 */ /* PC21 */ { 0, 0, 0, 0, 0, 0 }, /* PC21 */ /* PC20 */ { 0, 0, 0, 0, 0, 0 }, /* PC20 */ /* PC19 */ { 0, 0, 0, 0, 0, 0 }, /* PC19 */ /* PC18 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII Rx Clock (CLK14) */ /* PC17 */ { 0, 0, 0, 0, 0, 0 }, /* PC17 */ /* PC16 */ { CONFIG_SYS_FCC3, 1, 0, 0, 0, 0 }, /* FCC3 MII Tx Clock (CLK16) */ /* PC15 */ { 0, 0, 0, 0, 0, 0 }, /* PC15 */ /* PC14 */ { 0, 0, 0, 0, 0, 0 }, /* PC14 */ /* PC13 */ { 0, 0, 0, 0, 0, 0 }, /* PC13 */ /* PC12 */ { 0, 0, 0, 0, 0, 0 }, /* PC12 */ /* PC11 */ { 0, 0, 0, 0, 0, 0 }, /* PC11 */ /* PC10 */ { 0, 0, 0, 0, 0, 0 }, /* PC10 */ /* PC9 */ { 0, 0, 0, 0, 0, 0 }, /* PC9 */ /* PC8 */ { 0, 0, 0, 0, 0, 0 }, /* PC8 */ /* PC7 */ { 0, 0, 0, 0, 0, 0 }, /* PC7 */ /* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* PC6 */ /* PC5 */ { 0, 0, 0, 0, 0, 0 }, /* PC5 */ /* PC4 */ { 0, 0, 0, 0, 0, 0 }, /* PC4 */ /* PC3 */ { 0, 0, 0, 0, 0, 0 }, /* PC3 */ /* PC2 */ { 0, 0, 0, 0, 0, 0 }, /* PC2 */ /* PC1 */ { 0, 0, 0, 0, 0, 0 }, /* PC1 */ /* PC0 */ { 0, 0, 0, 0, 0, 0 } /* PC0 */ }, /* Port D */ { /* conf ppar psor pdir podr pdat */ /* PD31 */ { 0, 0, 0, 0, 0, 0 }, /* PD31 */ /* PD30 */ { 0, 0, 0, 0, 0, 0 }, /* PD30 */ /* PD29 */ { 0, 0, 0, 0, 0, 0 }, /* PD29 */ /* PD28 */ { 0, 0, 0, 0, 0, 0 }, /* PD28 */ /* PD27 */ { 0, 0, 0, 0, 0, 0 }, /* PD27 */ /* PD26 */ { 0, 0, 0, 0, 0, 0 }, /* PD26 */ /* PD25 */ { 0, 0, 0, 0, 0, 0 }, /* PD25 */ /* PD24 */ { 0, 0, 0, 0, 0, 0 }, /* PD24 */ /* PD23 */ { 0, 0, 0, 0, 0, 0 }, /* PD23 */ /* PD22 */ { 0, 0, 0, 0, 0, 0 }, /* PD22 */ /* PD21 */ { 0, 0, 0, 0, 0, 0 }, /* PD21 */ /* PD20 */ { 0, 0, 0, 0, 0, 0 }, /* PD20 */ /* PD19 */ { 0, 0, 0, 0, 0, 0 }, /* PD19 */ /* PD18 */ { 0, 1, 1, 0, 0, 0 }, /* SPICLK */ /* PD17 */ { 0, 1, 1, 0, 0, 0 }, /* SPIMOSI */ /* PD16 */ { 0, 1, 1, 0, 0, 0 }, /* SPIMISO */ /* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SDA */ /* PD14 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SCL */ /* PD13 */ { 1, 0, 0, 0, 0, 0 }, /* MII MDIO */ /* PD12 */ { 1, 0, 0, 1, 0, 0 }, /* MII MDC */ /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */ /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */ /* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 SMTXD */ /* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 SMRXD */ /* PD7 */ { 0, 0, 0, 0, 0, 0 }, /* PD7 */ /* PD6 */ { CONFIG_SYS_FCC3, 0, 0, 1, 0, 1 }, /* MII PHY Reset */ /* PD5 */ { CONFIG_SYS_FCC3, 0, 0, 1, 0, 0 }, /* MII PHY Enable */ /* PD4 */ { 0, 0, 0, 0, 0, 0 }, /* PD4 */ /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ } }; #define PSPAN_ADDR 0xF0020000 #define EEPROM_REG 0x408 #define EEPROM_READ_CMD 0xA000 #define PSPAN_WRITE(a,v) \ *((volatile unsigned long *)(PSPAN_ADDR+(a))) = v; eieio() #define PSPAN_READ(a) \ *((volatile unsigned long *)(PSPAN_ADDR+(a))) static int seeprom_read (int addr, uchar * data, int size) { ulong val, cmd; int i; for (i = 0; i < size; i++) { cmd = EEPROM_READ_CMD; cmd |= ((addr + i) << 24) & 0xff000000; /* Wait for ACT to authorize write */ while ((val = PSPAN_READ (EEPROM_REG)) & 0x80) eieio (); /* Write command */ PSPAN_WRITE (EEPROM_REG, cmd); /* Wait for data to be valid */ while ((val = PSPAN_READ (EEPROM_REG)) & 0x80) eieio (); /* Do it twice, first read might be erratic */ while ((val = PSPAN_READ (EEPROM_REG)) & 0x80) eieio (); /* Read error */ if (val & 0x00000040) { return -1; } else { data[i] = (val >> 16) & 0xff; } } return 0; } /*************************************************************** * We take some basic Hardware Configuration Parameter from the * Serial EEPROM conected to the PSpan bridge. We keep it as * simple as possible. */ #ifdef DEBUG static int hwc_flash_size (void) { uchar byte; if (!seeprom_read (0x40, &byte, sizeof (byte))) { switch ((byte >> 2) & 0x3) { case 0x1: return 0x0400000; break; case 0x2: return 0x0800000; break; case 0x3: return 0x1000000; default: return 0x0100000; } } return -1; } static int hwc_local_sdram_size (void) { uchar byte; if (!seeprom_read (0x40, &byte, sizeof (byte))) { switch ((byte & 0x03)) { case 0x1: return 0x0800000; case 0x2: return 0x1000000; default: return 0; /* not present */ } } return -1; } #endif /* DEBUG */ static int hwc_main_sdram_size (void) { uchar byte; if (!seeprom_read (0x41, &byte, sizeof (byte))) { return 0x1000000 << ((byte >> 5) & 0x7); } return -1; } static int hwc_serial_number (void) { int sn = -1; if (!seeprom_read (0xa0, (uchar *) &sn, sizeof (sn))) { sn = cpu_to_le32 (sn); } return sn; } static int hwc_mac_address (char *str) { char mac[6]; if (!seeprom_read (0xb0, (uchar *)mac, sizeof (mac))) { sprintf (str, "%02X:%02X:%02X:%02X:%02X:%02X", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); } else { strcpy (str, "ERROR"); return -1; } return 0; } static int hwc_manufact_date (char *str) { uchar byte; int value; if (seeprom_read (0x92, &byte, sizeof (byte))) goto out; value = byte; if (seeprom_read (0x93, &byte, sizeof (byte))) goto out; value += byte << 8; sprintf (str, "%02d/%02d/%04d", value & 0x1F, (value >> 5) & 0xF, 1980 + ((value >> 9) & 0x1FF)); return 0; out: strcpy (str, "ERROR"); return -1; } static int hwc_board_type (char **str) { ushort id = 0; if (seeprom_read (7, (uchar *) & id, sizeof (id)) == 0) { switch (id) { case 0x9080: *str = "4532-002"; break; case 0x9081: *str = "4532-001"; break; case 0x9082: *str = "4532-000"; break; default: *str = "Unknown"; } } else { *str = "Unknown"; } return id; } phys_size_t initdram (int board_type) { long maxsize = hwc_main_sdram_size(); #if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SYS_USE_FIRMWARE) volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8260_t *memctl = &immap->im_memctl; volatile uchar *base; int i; immap->im_siu_conf.sc_ppc_acr = 0x00000026; immap->im_siu_conf.sc_ppc_alrh = 0x01276345; immap->im_siu_conf.sc_ppc_alrl = 0x89ABCDEF; immap->im_siu_conf.sc_lcl_acr = 0x00000000; immap->im_siu_conf.sc_lcl_alrh = 0x01234567; immap->im_siu_conf.sc_lcl_alrl = 0x89ABCDEF; immap->im_siu_conf.sc_tescr1 = 0x00004000; immap->im_siu_conf.sc_ltescr1 = 0x00004000; memctl->memc_mptpr = CONFIG_SYS_MPTPR; /* Initialise 60x bus SDRAM */ base = (uchar *)(CONFIG_SYS_SDRAM_BASE | 0x110); memctl->memc_psrt = CONFIG_SYS_PSRT; memctl->memc_or1 = CONFIG_SYS_60x_OR; memctl->memc_br1 = CONFIG_SYS_SDRAM_BASE | CONFIG_SYS_60x_BR; memctl->memc_psdmr = CONFIG_SYS_PSDMR | 0x28000000; *base = 0xFF; memctl->memc_psdmr = CONFIG_SYS_PSDMR | 0x08000000; for (i = 0; i < 8; i++) *base = 0xFF; memctl->memc_psdmr = CONFIG_SYS_PSDMR | 0x18000000; *base = 0xFF; memctl->memc_psdmr = CONFIG_SYS_PSDMR | 0x40000000; /* Initialise local bus SDRAM */ base = (uchar *)CONFIG_SYS_LSDRAM_BASE; memctl->memc_lsrt = CONFIG_SYS_LSRT; memctl->memc_or2 = CONFIG_SYS_LOC_OR; memctl->memc_br2 = CONFIG_SYS_LSDRAM_BASE | CONFIG_SYS_LOC_BR; memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x28000000; *base = 0xFF; memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x08000000; for (i = 0; i < 8; i++) *base = 0xFF; memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x18000000; *base = 0xFF; memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x40000000; /* We must be able to test a location outsize the maximum legal size * to find out THAT we are outside; but this address still has to be * mapped by the controller. That means, that the initial mapping has * to be (at least) twice as large as the maximum expected size. */ maxsize = (~(memctl->memc_or1 & BRx_BA_MSK) + 1) / 2; maxsize = get_ram_size((long *)(memctl->memc_br1 & BRx_BA_MSK), maxsize); memctl->memc_or1 |= ~(maxsize - 1); if (maxsize != hwc_main_sdram_size()) puts("Oops: memory test has not found all memory!\n"); #endif /* !CONFIG_SYS_RAMBOOT && !CONFIG_SYS_USE_FIRMWARE */ /* Return total RAM size (size of 60x SDRAM) */ return maxsize; } int checkboard(void) { char string[32], *id; hwc_manufact_date(string); hwc_board_type(&id); printf("Board: Interphase iSPAN %s (#%d %s)\n", id, hwc_serial_number(), string); #ifdef DEBUG printf("Manufacturing date: %s\n", string); printf("Serial number : %d\n", hwc_serial_number()); printf("FLASH size : %d MB\n", hwc_flash_size() >> 20); printf("Main SDRAM size : %d MB\n", hwc_main_sdram_size() >> 20); printf("Local SDRAM size : %d MB\n", hwc_local_sdram_size() >> 20); hwc_mac_address(string); printf("MAC address : %s\n", string); #endif return 0; } int misc_init_r(void) { char *s, str[32]; int num; if ((s = getenv("serial#")) == NULL && (num = hwc_serial_number()) != -1) { sprintf(str, "%06d", num); setenv("serial#", str); } if ((s = getenv("ethaddr")) == NULL && hwc_mac_address(str) == 0) { setenv("ethaddr", str); } return 0; }