/* * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include /* ------------------------------------------------------------------------- */ static long int dram_size (long int, long int *, long int); unsigned long ip860_get_dram_size(void); unsigned long ip860_get_clk_freq (void); /* ------------------------------------------------------------------------- */ #define _NOT_USED_ 0xFFFFFFFF const uint sdram_table[] = { /* * Single Read. (Offset 0 in UPMA RAM) */ 0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00, 0x1ff77c47, /* last */ /* * SDRAM Initialization (offset 5 in UPMA RAM) * * This is no UPM entry point. The following definition uses * the remaining space to establish an initialization * sequence, which is executed by a RUN command. * */ 0x1ff77c34, 0xefeabc34, 0x1fb57c35, /* last */ /* * Burst Read. (Offset 8 in UPMA RAM) */ 0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00, 0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Single Write. (Offset 18 in UPMA RAM) */ 0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Burst Write. (Offset 20 in UPMA RAM) */ 0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00, 0xf0affc00, 0xe1bbbc04, 0x1ff77c47, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Refresh (Offset 30 in UPMA RAM) */ 0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc84, 0xfffffc07, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Exception. (Offset 3c in UPMA RAM) */ 0x7ffffc07, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, }; /* ------------------------------------------------------------------------- */ int board_early_init_f(void) { volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; /* init BCSR chipselect line for ip860_get_clk_freq() and ip860_get_dram_size() */ memctl->memc_or4 = CONFIG_SYS_OR4; memctl->memc_br4 = CONFIG_SYS_BR4; return 0; } /* ------------------------------------------------------------------------- */ /* * Check Board Identity: * * Test ID string (IP860...) */ int checkboard (void) { unsigned char *s, *e; unsigned char buf[64]; int i; puts ("Board: "); i = getenv_f("serial#", (char *)buf, sizeof (buf)); s = (i > 0) ? buf : NULL; if (!s || strncmp ((char *)s, "IP860", 5)) { puts ("### No HW ID - assuming IP860"); } else { for (e = s; *e; ++e) { if (*e == ' ') break; } for (; s < e; ++s) { putc (*s); } } putc ('\n'); return (0); } /* ------------------------------------------------------------------------- */ phys_size_t initdram (int board_type) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; long int size; ulong refresh_val; upmconfig (UPMA, (uint *) sdram_table, sizeof (sdram_table) / sizeof (uint)); /* * Preliminary prescaler for refresh */ if (ip860_get_clk_freq() == 50000000) { memctl->memc_mptpr = 0x0400; refresh_val = 0xC3000000; } else { memctl->memc_mptpr = 0x0200; refresh_val = 0x9C000000; } memctl->memc_mar = 0x00000088; /* * Map controller banks 2 to the SDRAM address */ memctl->memc_or2 = CONFIG_SYS_OR2; memctl->memc_br2 = CONFIG_SYS_BR2; /* IP860 boards have only one bank SDRAM */ udelay (200); /* perform SDRAM initializsation sequence */ memctl->memc_mamr = 0x00804114 | refresh_val; memctl->memc_mcr = 0x80004105; /* run precharge pattern from loc 5 */ udelay(1); memctl->memc_mamr = 0x00804118 | refresh_val; memctl->memc_mcr = 0x80004130; /* run refresh pattern 8 times */ udelay (1000); /* * Check SDRAM Memory Size */ if (ip860_get_dram_size() == 16) size = dram_size (refresh_val | 0x00804114, SDRAM_BASE, SDRAM_MAX_SIZE); else size = dram_size (refresh_val | 0x00906114, SDRAM_BASE, SDRAM_MAX_SIZE); udelay (1000); memctl->memc_or2 = ((-size) & 0xFFFF0000) | SDRAM_TIMING; memctl->memc_br2 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; udelay (10000); /* * Also, map other memory to correct position */ #if (defined(CONFIG_SYS_OR1) && defined(CONFIG_SYS_BR1_PRELIM)) memctl->memc_or1 = CONFIG_SYS_OR1; memctl->memc_br1 = CONFIG_SYS_BR1; #endif #if defined(CONFIG_SYS_OR3) && defined(CONFIG_SYS_BR3) memctl->memc_or3 = CONFIG_SYS_OR3; memctl->memc_br3 = CONFIG_SYS_BR3; #endif #if defined(CONFIG_SYS_OR4) && defined(CONFIG_SYS_BR4) memctl->memc_or4 = CONFIG_SYS_OR4; memctl->memc_br4 = CONFIG_SYS_BR4; #endif #if defined(CONFIG_SYS_OR5) && defined(CONFIG_SYS_BR5) memctl->memc_or5 = CONFIG_SYS_OR5; memctl->memc_br5 = CONFIG_SYS_BR5; #endif #if defined(CONFIG_SYS_OR6) && defined(CONFIG_SYS_BR6) memctl->memc_or6 = CONFIG_SYS_OR6; memctl->memc_br6 = CONFIG_SYS_BR6; #endif #if defined(CONFIG_SYS_OR7) && defined(CONFIG_SYS_BR7) memctl->memc_or7 = CONFIG_SYS_OR7; memctl->memc_br7 = CONFIG_SYS_BR7; #endif return (size); } /* ------------------------------------------------------------------------- */ /* * Check memory range for valid RAM. A simple memory test determines * the actually available RAM size between addresses `base' and * `base + maxsize'. Some (not all) hardware errors are detected: * - short between address lines * - short between data lines */ static long int dram_size (long int mamr_value, long int *base, long int maxsize) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; memctl->memc_mamr = mamr_value; return (get_ram_size(base, maxsize)); } /* ------------------------------------------------------------------------- */ void reset_phy (void) { volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; ulong mask = PB_ENET_RESET | PB_ENET_JABD; ulong reg; /* Make sure PHY is not in low-power mode */ immr->im_cpm.cp_pbpar &= ~(mask); /* GPIO */ immr->im_cpm.cp_pbodr &= ~(mask); /* active output */ /* Set JABD low (no JABber Disable), * and RESET high (Reset PHY) */ reg = immr->im_cpm.cp_pbdat; reg = (reg & ~PB_ENET_JABD) | PB_ENET_RESET; immr->im_cpm.cp_pbdat = reg; /* now drive outputs */ immr->im_cpm.cp_pbdir |= mask; /* output */ udelay (1000); /* * Release RESET signal */ immr->im_cpm.cp_pbdat &= ~(PB_ENET_RESET); udelay (1000); } /* ------------------------------------------------------------------------- */ unsigned long ip860_get_clk_freq(void) { volatile ip860_bcsr_t *bcsr = (ip860_bcsr_t *)BCSR_BASE; ulong temp; uchar sysclk; if ((bcsr->bd_status & 0x80) == 0x80) /* bd_rev valid ? */ sysclk = (bcsr->bd_rev & 0x18) >> 3; else sysclk = 0x00; switch (sysclk) { case 0x00: temp = 50000000; break; case 0x01: temp = 80000000; break; default: temp = 50000000; break; } return (temp); } /* ------------------------------------------------------------------------- */ unsigned long ip860_get_dram_size(void) { volatile ip860_bcsr_t *bcsr = (ip860_bcsr_t *)BCSR_BASE; ulong temp; uchar dram_size; if ((bcsr->bd_status & 0x80) == 0x80) /* bd_rev valid ? */ dram_size = (bcsr->bd_rev & 0xE0) >> 5; else dram_size = 0x00; /* default is 16 MB */ switch (dram_size) { case 0x00: temp = 16; break; case 0x01: temp = 32; break; default: temp = 16; break; } return (temp); } /* ------------------------------------------------------------------------- */