/* * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include "ioport.h" #if 0 #define IOPORT_DEBUG #endif #ifdef IOPORT_DEBUG #define PRINTF(fmt,args...) printf (fmt ,##args) #else #define PRINTF(fmt,args...) #endif /* * The ioport configuration table. */ const mpc8xx_iop_conf_t iop_conf_tab[NUM_PORTS][PORT_BITS] = { /* * Port A configuration * Pin Signal Type Active Initial state * PA7 fpgaProgramLowOut Out Low High */ { /* conf ppar psor pdir podr pdat pint function */ /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* No pin */ /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* No pin */ /* PA15 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PA14 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PA13 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PA12 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PA11 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PA10 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PA9 */ { 1, 0, 0, 1, 0, 0, 0 }, /* grn bicolor LED 1*/ /* PA8 */ { 1, 0, 0, 1, 0, 0, 0 }, /* red bicolor LED 1*/ /* PA7 */ { 1, 0, 0, 1, 0, 1, 0 }, /* fpgaProgramLow */ /* PA6 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PA5 */ { 1, 0, 0, 1, 0, 0, 0 }, /* grn bicolor LED 0*/ /* PA4 */ { 1, 0, 0, 1, 0, 0, 0 }, /* red bicolor LED 0*/ /* PA3 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PA2 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PA1 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PA0 */ { 0, 0, 0, 0, 0, 0, 0 } /* */ }, /* * Pin Signal Type Active Initial state * PB14 docBusyLowIn In Low X * PB15 gpio1Sig Out High Low * PB16 fpgaDoneBi In High X * PB17 swBitOkLowOut Out Low Low * PB19 speakerVolSig Out/Hi-Z High/Low High (Hi-Z) * PB22 fpgaInitLowBi In Low X * PB23 batteryOkSig In High X */ { /* conf ppar psor pdir podr pdat pint function */ /* PB31 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PB30 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PB29 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PB28 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PB27 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PB26 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PB25 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PB24 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PB23 */ { 1, 0, 0, 0, 0, 0, 0 }, /* batteryOk */ /* PB22 */ { 1, 0, 0, 0, 0, 0, 0 }, /* fpgaInitLowBi */ /* PB21 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PB20 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PB19 */ { 1, 0, 0, 1, 1, 1, 0 }, /* speakerVol */ /* PB18 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PB17 */ { 1, 0, 0, 1, 0, 0, 0 }, /* swBitOkLow */ /* PB16 */ { 1, 0, 0, 0, 0, 0, 0 }, /* fpgaDone */ /* PB15 */ { 1, 0, 0, 1, 0, 0, 0 }, /* gpio1 */ /* PB14 */ { 1, 0, 0, 0, 0, 0, 0 } /* docBusyLow */ }, /* * Pin Signal Type Active Initial state * PC4 i2cBus1EnSig Out High High * PC5 i2cBus2EnSig Out High High * PC6 gpio0Sig Out High Low * PC8 i2cBus3EnSig Out High High * PC10 i2cBus4EnSig Out High High * PC11 fpgaResetLowOut Out Low High * PC12 systemBitOkIn In High X * PC15 selfDreqLow In Low X */ { /* conf ppar psor pdir podr pdat pint function */ /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PC15 */ { 1, 0, 0, 0, 0, 0, 0 }, /* selfDreqLowIn */ /* PC14 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PC13 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PC12 */ { 1, 0, 0, 0, 0, 0, 0 }, /* systemBitOkIn */ /* PC11 */ { 1, 0, 0, 1, 0, 1, 0 }, /* fpgaResetLowOut */ /* PC10 */ { 1, 0, 0, 1, 0, 1, 0 }, /* i2cBus4EnSig */ /* PC9 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PC8 */ { 1, 0, 0, 1, 0, 1, 0 }, /* i2cBus3EnSig */ /* PC7 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PC6 */ { 1, 0, 0, 1, 0, 1, 0 }, /* gpio0 */ /* PC5 */ { 1, 0, 0, 1, 0, 1, 0 }, /* i2cBus2EnSig */ /* PC4 */ { 1, 0, 0, 1, 0, 1, 0 }, /* i2cBus1EnSig */ /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* N/A */ { 0, 0, 0, 0, 0, 0, 0 } /* */ }, /* Port D configuration */ { /* conf ppar psor pdir podr pdat pint function */ /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PD15 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PD14 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PD13 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PD12 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PD11 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PD10 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PD9 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PD8 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PD7 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PD6 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PD5 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PD4 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* PD3 */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* N/A */ { 0, 0, 0, 0, 0, 0, 0 }, /* */ /* N/A */ { 0, 0, 0, 0, 0, 0, 0 } /* */ } }; /* * Configure the MPC8XX I/O ports per the ioport configuration table * (taken from ./cpu/mpc8260/cpu_init.c) */ void config_mpc8xx_ioports(volatile immap_t *immr) { int portnum; for (portnum = 0; portnum < NUM_PORTS; portnum++) { uint pmsk = 0, ppar = 0, psor = 0, pdir = 0; uint podr = 0, pdat = 0, pint = 0; uint msk = 1; mpc8xx_iop_conf_t *iopc = (mpc8xx_iop_conf_t *)&iop_conf_tab[portnum][0]; mpc8xx_iop_conf_t *eiopc = iopc + PORT_BITS; /* * For all ports except port B, ignore the two don't care entries * in the configuration tables. */ if (portnum != 1) { iopc = (mpc8xx_iop_conf_t *)&iop_conf_tab[portnum][2]; } /* * NOTE: index 0 refers to pin 17, index 17 refers to pin 0 */ while (iopc < eiopc) { if (iopc->conf) { pmsk |= msk; if (iopc->ppar) ppar |= msk; if (iopc->psor) psor |= msk; if (iopc->pdir) pdir |= msk; if (iopc->podr) podr |= msk; if (iopc->pdat) pdat |= msk; if (iopc->pint) pint |= msk; } msk <<= 1; iopc++; } PRINTF("%s:%d:\n portnum=%d ", __FUNCTION__, __LINE__, portnum); #ifdef IOPORT_DEBUG switch(portnum) { case 0: printf("(A)\n"); break; case 1: printf("(B)\n"); break; case 2: printf("(C)\n"); break; case 3: printf("(D)\n"); break; default: printf("(?)\n"); break; } #endif PRINTF(" ppar=0x%.8x pdir=0x%.8x podr=0x%.8x\n" " pdat=0x%.8x psor=0x%.8x pint=0x%.8x pmsk=0x%.8x\n", ppar, pdir, podr, pdat, psor, pint, pmsk); /* * Have to handle the ioports on a port-by-port basis since there * are three different flavors. */ if (pmsk != 0) { uint tpmsk = ~pmsk; if (0 == portnum) { /* port A */ immr->im_ioport.iop_papar &= tpmsk; immr->im_ioport.iop_padat = (immr->im_ioport.iop_padat & tpmsk) | pdat; immr->im_ioport.iop_padir = (immr->im_ioport.iop_padir & tpmsk) | pdir; immr->im_ioport.iop_paodr = (immr->im_ioport.iop_paodr & tpmsk) | podr; immr->im_ioport.iop_papar |= ppar; } else if (1 == portnum) { /* port B */ immr->im_cpm.cp_pbpar &= tpmsk; immr->im_cpm.cp_pbdat = (immr->im_cpm.cp_pbdat & tpmsk) | pdat; immr->im_cpm.cp_pbdir = (immr->im_cpm.cp_pbdir & tpmsk) | pdir; immr->im_cpm.cp_pbodr = (immr->im_cpm.cp_pbodr & tpmsk) | podr; immr->im_cpm.cp_pbpar |= ppar; } else if (2 == portnum) { /* port C */ immr->im_ioport.iop_pcpar &= tpmsk; immr->im_ioport.iop_pcdat = (immr->im_ioport.iop_pcdat & tpmsk) | pdat; immr->im_ioport.iop_pcdir = (immr->im_ioport.iop_pcdir & tpmsk) | pdir; immr->im_ioport.iop_pcint = (immr->im_ioport.iop_pcint & tpmsk) | pint; immr->im_ioport.iop_pcso = (immr->im_ioport.iop_pcso & tpmsk) | psor; immr->im_ioport.iop_pcpar |= ppar; } else if (3 == portnum) { /* port D */ immr->im_ioport.iop_pdpar &= tpmsk; immr->im_ioport.iop_pddat = (immr->im_ioport.iop_pddat & tpmsk) | pdat; immr->im_ioport.iop_pddir = (immr->im_ioport.iop_pddir & tpmsk) | pdir; immr->im_ioport.iop_pdpar |= ppar; } } } PRINTF("%s:%d: Port A:\n papar=0x%.4x padir=0x%.4x" " paodr=0x%.4x\n padat=0x%.4x\n", __FUNCTION__, __LINE__, immr->im_ioport.iop_papar, immr->im_ioport.iop_padir, immr->im_ioport.iop_paodr, immr->im_ioport.iop_padat); PRINTF("%s:%d: Port B:\n pbpar=0x%.8x pbdir=0x%.8x" " pbodr=0x%.8x\n pbdat=0x%.8x\n", __FUNCTION__, __LINE__, immr->im_cpm.cp_pbpar, immr->im_cpm.cp_pbdir, immr->im_cpm.cp_pbodr, immr->im_cpm.cp_pbdat); PRINTF("%s:%d: Port C:\n pcpar=0x%.4x pcdir=0x%.4x" " pcdat=0x%.4x\n pcso=0x%.4x pcint=0x%.4x\n ", __FUNCTION__, __LINE__, immr->im_ioport.iop_pcpar, immr->im_ioport.iop_pcdir, immr->im_ioport.iop_pcdat, immr->im_ioport.iop_pcso, immr->im_ioport.iop_pcint); PRINTF("%s:%d: Port D:\n pdpar=0x%.4x pddir=0x%.4x" " pddat=0x%.4x\n", __FUNCTION__, __LINE__, immr->im_ioport.iop_pdpar, immr->im_ioport.iop_pddir, immr->im_ioport.iop_pddat); } /* vim: set ts=4 sw=4 tw=78: */