/* * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * Derived from FADS860T definitions by Magnus Damm, Helmut Buchsbaum, * and Dan Malek * * Modified by, Yuli Barcohen, Arabella Software Ltd., yuli@arabellasw.com * * This header file contains values common to all FADS family boards. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ /**************************************************************************** * Flash Memory Map as used by U-Boot: * * Start Address Length * +-----------------------+ 0xFE00_0000 Start of Flash ----------------- * | | 0xFE00_0100 Reset Vector * + + 0xFE0?_???? * | U-Boot code | * | | * +-----------------------+ 0xFE04_0000 (sector border) * | | * | | * | U-Boot environment | * | | ^ * | | | U-Boot * +=======================+ 0xFE08_0000 (sector border) ----------------- * | Available | | Applications * | ... | v * *****************************************************************************/ #if 0 #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ #else #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #endif #define CONFIG_ENV_OVERWRITE #define CONFIG_NFSBOOTCOMMAND \ "dhcp;" \ "setenv bootargs root=/dev/nfs rw nfsroot=$rootpath " \ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:eth0:off;" \ "bootm" #define CONFIG_BOOTCOMMAND \ "setenv bootargs root=/dev/mtdblock2 rw mtdparts=phys:1280K(ROM)ro,-(root) "\ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:eth0:off;" \ "bootm fe080000" #undef CONFIG_BOOTARGS #undef CONFIG_WATCHDOG /* watchdog disabled */ #if !defined(CONFIG_MPC885ADS) #define CONFIG_BZIP2 /* include support for bzip2 compressed images */ #endif /* * New MPC86xADS and MPC885ADS provide two Ethernet connectivity options: * 10Mbit/s on SCC and 100Mbit/s on FEC. FADS provides SCC Ethernet on * motherboard and FEC Ethernet on daughterboard. All new PQ1 chips have * got FEC so FEC is the default. */ #ifndef CONFIG_ADS #undef CONFIG_SCC1_ENET /* Disable SCC1 ethernet */ #define CONFIG_FEC_ENET /* Use FEC ethernet */ #else /* Old ADS has not got FEC option */ #define CONFIG_SCC1_ENET /* Use SCC1 ethernet */ #undef CONFIG_FEC_ENET /* No FEC ethernet */ #endif /* !CONFIG_ADS */ #if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET) #error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured #endif #ifdef CONFIG_FEC_ENET #define CONFIG_SYS_DISCOVER_PHY #define CONFIG_MII_INIT 1 #endif /* * BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME #if !defined(FADS_COMMANDS_ALREADY_DEFINED) /* * Command line configuration. */ #include #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP #define CONFIG_CMD_ECHO #define CONFIG_CMD_IMMAP #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MII #define CONFIG_CMD_PCMCIA #define CONFIG_CMD_PING #endif /* * Miscellaneous configurable options */ #define CONFIG_SYS_PROMPT "=>" /* Monitor Command Prompt */ #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_LONGHELP /* #undef to save memory */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00100000 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) * You should know what you are doing if you make changes here. */ /*----------------------------------------------------------------------- * Internal Memory Mapped Register */ #define CONFIG_SYS_IMMR 0xFF000000 /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 #if defined(CONFIG_MPC86xADS) || defined(CONFIG_MPC885ADS) /* New ADS or Duet */ #define CONFIG_SYS_SDRAM_SIZE 0x00800000 /* 8 Mbyte */ /* * 2048 SDRAM rows * 1000 factor s -> ms * 64 PTP (pre-divider from MPTPR) from SDRAM example configuration * 4 Number of refresh cycles per period * 64 Refresh cycle in ms per number of rows */ #define CONFIG_SYS_PTA_PER_CLK ((2048 * 64 * 1000) / (4 * 64)) #elif defined(CONFIG_FADS) /* Old/new FADS */ #define CONFIG_SYS_SDRAM_SIZE 0x00400000 /* 4 Mbyte */ #else /* Old ADS */ #define CONFIG_SYS_SDRAM_SIZE 0x00000000 /* No SDRAM */ #endif #define CONFIG_SYS_MEMTEST_START 0x0100000 /* memtest works on */ #if (CONFIG_SYS_SDRAM_SIZE) #define CONFIG_SYS_MEMTEST_END CONFIG_SYS_SDRAM_SIZE /* 1 ... SDRAM_SIZE */ #else #define CONFIG_SYS_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */ #endif /* CONFIG_SYS_SDRAM_SIZE */ /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 KB for monitor */ #ifdef CONFIG_BZIP2 #define CONFIG_SYS_MALLOC_LEN (2500 << 10) /* Reserve ~2.5 MB for malloc() */ #else #define CONFIG_SYS_MALLOC_LEN (384 << 10) /* Reserve 384 kB for malloc() */ #endif /* CONFIG_BZIP2 */ /*----------------------------------------------------------------------- * Flash organization */ #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_MONITOR_BASE #define CONFIG_SYS_FLASH_SIZE ((uint)(8 * 1024 * 1024)) /* max 8Mbyte */ #define CONFIG_SYS_MAX_FLASH_BANKS 4 /* max number of memory banks */ #define CONFIG_SYS_MAX_FLASH_SECT 8 /* max number of sectors on one chip */ #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_SECT_SIZE 0x40000 /* see README - env sector total size */ #define CONFIG_ENV_OFFSET CONFIG_ENV_SECT_SIZE #define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment */ #define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */ #define CONFIG_SYS_DIRECT_FLASH_TFTP #if defined(CONFIG_CMD_JFFS2) /* * JFFS2 partitions * */ /* No command line, one static partition, whole device */ #undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF #define CONFIG_JFFS2_PART_OFFSET 0x00000000 /* mtdparts command line support */ /* Note: fake mtd_id used, no linux mtd map file */ /* #define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=fads0,nor1=fads-1,nor2=fads-2,nor3=fads-3" #define MTDPARTS_DEFAULT "mtdparts=fads-0:-@1m(user1),fads-1:-(user2),fads-2:-(user3),fads-3:-(user4)" */ #define CONFIG_SYS_JFFS2_SORT_FRAGMENTS #endif /*----------------------------------------------------------------------- * Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ #define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ /*----------------------------------------------------------------------- * I2C configuration */ #if defined(CONFIG_CMD_I2C) #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address defaults */ #define CONFIG_SYS_I2C_SLAVE 0x7F #endif /*----------------------------------------------------------------------- * SYPCR - System Protection Control 11-9 * SYPCR can only be written once after reset! *----------------------------------------------------------------------- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze */ #if defined(CONFIG_WATCHDOG) #define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) #else #define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) #endif /*----------------------------------------------------------------------- * SIUMCR - SIU Module Configuration 11-6 *----------------------------------------------------------------------- * PCMCIA config., multi-function pin tri-state */ #define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) /*----------------------------------------------------------------------- * TBSCR - Time Base Status and Control 11-26 *----------------------------------------------------------------------- * Clear Reference Interrupt Status, Timebase freezing enabled */ #define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE) /*----------------------------------------------------------------------- * PISCR - Periodic Interrupt Status and Control 11-31 *----------------------------------------------------------------------- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled */ #define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) /*----------------------------------------------------------------------- * SCCR - System Clock and reset Control Register 15-27 *----------------------------------------------------------------------- * Set clock output, timebase and RTC source and divider, * power management and some other internal clocks */ #define SCCR_MASK SCCR_EBDF11 #define CONFIG_SYS_SCCR SCCR_TBS /*----------------------------------------------------------------------- * DER - Debug Enable Register *----------------------------------------------------------------------- * Set to zero to prevent the processor from entering debug mode */ #define CONFIG_SYS_DER 0 /* Because of the way the 860 starts up and assigns CS0 the entire * address space, we have to set the memory controller differently. * Normally, you write the option register first, and then enable the * chip select by writing the base register. For CS0, you must write * the base register first, followed by the option register. */ /* * Init Memory Controller: * * BR0/OR0 (Flash) * BR1/OR1 (BCSR) */ /* the other CS:s are determined by looking at parameters in BCSRx */ #define BCSR_ADDR ((uint) 0xFF080000) #define CONFIG_SYS_PRELIM_OR_AM 0xFF800000 /* OR addr mask */ /* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */ #define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX) #define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) /* 8 Mbyte until detected */ #define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_V ) /* BCSRx - Board Control and Status Registers */ #define CONFIG_SYS_OR1_PRELIM 0xFFFF8110 /* 64Kbyte address space */ #define CONFIG_SYS_BR1_PRELIM ((BCSR_ADDR) | BR_V) /* values according to the manual */ #define BCSR0 ((uint) (BCSR_ADDR + 0x00)) #define BCSR1 ((uint) (BCSR_ADDR + 0x04)) #define BCSR2 ((uint) (BCSR_ADDR + 0x08)) #define BCSR3 ((uint) (BCSR_ADDR + 0x0c)) #define BCSR4 ((uint) (BCSR_ADDR + 0x10)) /* * (F)ADS bitvalues by Helmut Buchsbaum * * See User's Manual for a proper * description of the following structures */ #define BCSR0_ERB ((uint)0x80000000) #define BCSR0_IP ((uint)0x40000000) #define BCSR0_BDIS ((uint)0x10000000) #define BCSR0_BPS_MASK ((uint)0x0C000000) #define BCSR0_ISB_MASK ((uint)0x01800000) #define BCSR0_DBGC_MASK ((uint)0x00600000) #define BCSR0_DBPC_MASK ((uint)0x00180000) #define BCSR0_EBDF_MASK ((uint)0x00060000) #define BCSR1_FLASH_EN ((uint)0x80000000) #define BCSR1_DRAM_EN ((uint)0x40000000) #define BCSR1_ETHEN ((uint)0x20000000) #define BCSR1_IRDEN ((uint)0x10000000) #define BCSR1_FLASH_CFG_EN ((uint)0x08000000) #define BCSR1_CNT_REG_EN_PROTECT ((uint)0x04000000) #define BCSR1_BCSR_EN ((uint)0x02000000) #define BCSR1_RS232EN_1 ((uint)0x01000000) #define BCSR1_PCCEN ((uint)0x00800000) #define BCSR1_PCCVCC0 ((uint)0x00400000) #define BCSR1_PCCVPP_MASK ((uint)0x00300000) #define BCSR1_DRAM_HALF_WORD ((uint)0x00080000) #define BCSR1_RS232EN_2 ((uint)0x00040000) #define BCSR1_SDRAM_EN ((uint)0x00020000) #define BCSR1_PCCVCC1 ((uint)0x00010000) #define BCSR1_PCCVCCON BCSR1_PCCVCC0 #define BCSR2_FLASH_PD_MASK ((uint)0xF0000000) #define BCSR2_FLASH_PD_SHIFT 28 #define BCSR2_DRAM_PD_MASK ((uint)0x07800000) #define BCSR2_DRAM_PD_SHIFT 23 #define BCSR2_EXTTOLI_MASK ((uint)0x00780000) #define BCSR2_DBREVNR_MASK ((uint)0x00030000) #define BCSR3_DBID_MASK ((ushort)0x3800) #define BCSR3_CNT_REG_EN_PROTECT ((ushort)0x0400) #define BCSR3_BREVNR0 ((ushort)0x0080) #define BCSR3_FLASH_PD_MASK ((ushort)0x0070) #define BCSR3_BREVN1 ((ushort)0x0008) #define BCSR3_BREVN2_MASK ((ushort)0x0003) #define BCSR4_ETHLOOP ((uint)0x80000000) #define BCSR4_TFPLDL ((uint)0x40000000) #define BCSR4_TPSQEL ((uint)0x20000000) #define BCSR4_SIGNAL_LAMP ((uint)0x10000000) #if defined(CONFIG_MPC823) #define BCSR4_USB_EN ((uint)0x08000000) #define BCSR4_USB_SPEED ((uint)0x04000000) #define BCSR4_VCCO ((uint)0x02000000) #define BCSR4_VIDEO_ON ((uint)0x00800000) #define BCSR4_VDO_EKT_CLK_EN ((uint)0x00400000) #define BCSR4_VIDEO_RST ((uint)0x00200000) #define BCSR4_MODEM_EN ((uint)0x00100000) #define BCSR4_DATA_VOICE ((uint)0x00080000) #elif defined(CONFIG_MPC850) #define BCSR4_DATA_VOICE ((uint)0x00080000) #elif defined(CONFIG_MPC860SAR) #define BCSR4_UTOPIA_EN ((uint)0x08000000) #else /* MPC860T and other chips with FEC */ #define BCSR4_FETH_EN ((uint)0x08000000) #define BCSR4_FETHCFG0 ((uint)0x04000000) #define BCSR4_FETHFDE ((uint)0x02000000) #define BCSR4_FETHCFG1 ((uint)0x00400000) #define BCSR4_FETHRST ((uint)0x00200000) #endif /* BSCR5 exists on MPC86xADS and MPC885ADS only */ #define CONFIG_SYS_PHYDEV_ADDR (BCSR_ADDR + 0x20000) #define BCSR5 (CONFIG_SYS_PHYDEV_ADDR + 0x300) #define BCSR5_MII2_EN 0x40 #define BCSR5_MII2_RST 0x20 #define BCSR5_T1_RST 0x10 #define BCSR5_ATM155_RST 0x08 #define BCSR5_ATM25_RST 0x04 #define BCSR5_MII1_EN 0x02 #define BCSR5_MII1_RST 0x01 /* We don't use the 8259. */ #define NR_8259_INTS 0 /*----------------------------------------------------------------------- * PCMCIA stuff *----------------------------------------------------------------------- */ #define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) #define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) #define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) #define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) #define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) #define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) #define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) #define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) /*----------------------------------------------------------------------- * IDE/ATA stuff *----------------------------------------------------------------------- */ #define CONFIG_MAC_PARTITION 1 #define CONFIG_DOS_PARTITION 1 #define CONFIG_ISO_PARTITION 1 #undef CONFIG_ATAPI #if 0 /* does not make sense when CONFIG_CMD_IDE is not enabled, too */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #endif #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ #undef CONFIG_IDE_LED /* LED for ide not supported */ #undef CONFIG_IDE_RESET /* reset for ide not supported */ #define CONFIG_SYS_IDE_MAXBUS 1 /* max. 2 IDE busses */ #define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */ #define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR #define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 /* Offset for data I/O */ #define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) /* Offset for normal register accesses */ #define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) /* Offset for alternate registers */ #define CONFIG_SYS_ATA_ALT_OFFSET 0x0000 #define CONFIG_DISK_SPINUP_TIME 1000000 /* #undef CONFIG_DISK_SPINUP_TIME */ /* usin Compact Flash */