/* * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ #if defined(CONFIG_ENV_IS_IN_FLASH) # ifndef CONFIG_ENV_ADDR # define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) # endif # ifndef CONFIG_ENV_SIZE # define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE # endif # ifndef CONFIG_ENV_SECT_SIZE # define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE # endif #endif /*----------------------------------------------------------------------- * Functions */ static int write_word (flash_info_t *info, ulong dest, ulong data); /*----------------------------------------------------------------------- */ #if defined(CONFIG_CMA302) /* * probe for the existence of flash at address "addr" * 0 = yes, 1 = bad Manufacturer's Id, 2 = bad Device Id */ static int c302f_probe_word(c302f_addr_t addr) { /* reset the flash */ *addr = C302F_BNK_CMD_RST; /* check the manufacturer id */ *addr = C302F_BNK_CMD_RD_ID; if (*C302F_BNK_ADDR_MAN(addr) != C302F_BNK_RD_ID_MAN) return 1; /* check the device id */ *addr = C302F_BNK_CMD_RD_ID; if (*C302F_BNK_ADDR_DEV(addr) != C302F_BNK_RD_ID_DEV) return 2; #ifdef FLASH_DEBUG { int i; printf("\nMaster Lock Config = 0x%08lx\n", *C302F_BNK_ADDR_CFGM(addr)); for (i = 0; i < C302F_BNK_NBLOCKS; i++) printf("Block %2d Lock Config = 0x%08lx\n", i, *C302F_BNK_ADDR_CFG(i, addr)); } #endif /* reset the flash again */ *addr = C302F_BNK_CMD_RST; return 0; } /* * probe for Cogent CMA302 flash module at address "base" and store * info for any found into flash_info entry "fip". Must find at least * one bank. */ static void c302f_probe(flash_info_t *fip, c302f_addr_t base) { c302f_addr_t addr, eaddr; int nbanks; fip->size = 0L; fip->sector_count = 0; addr = base; eaddr = C302F_BNK_ADDR_BASE(addr, C302F_MAX_BANKS); nbanks = 0; while (addr < eaddr) { c302f_addr_t addrw, eaddrw, addrb; int i, osc, nsc; addrw = addr; eaddrw = C302F_BNK_ADDR_NEXT_WORD(addrw); while (addrw < eaddrw) if (c302f_probe_word(addrw++) != 0) goto out; /* bank exists - append info for this bank to *fip */ fip->flash_id = FLASH_MAN_INTEL|FLASH_28F008S5; fip->size += C302F_BNK_SIZE; osc = fip->sector_count; fip->sector_count += C302F_BNK_NBLOCKS; if ((nsc = fip->sector_count) >= CONFIG_SYS_MAX_FLASH_SECT) panic("Too many sectors in flash at address 0x%08lx\n", (unsigned long)base); addrb = addr; for (i = osc; i < nsc; i++) { fip->start[i] = (ulong)addrb; fip->protect[i] = 0; addrb = C302F_BNK_ADDR_NEXT_BLK(addrb); } addr = C302F_BNK_ADDR_NEXT_BNK(addr); nbanks++; } out: if (nbanks == 0) panic("ERROR: no flash found at address 0x%08lx\n", (unsigned long)base); } static void c302f_reset(flash_info_t *info, int sect) { c302f_addr_t addrw, eaddrw; addrw = (c302f_addr_t)info->start[sect]; eaddrw = C302F_BNK_ADDR_NEXT_WORD(addrw); while (addrw < eaddrw) { #ifdef FLASH_DEBUG printf(" writing reset cmd to addr 0x%08lx\n", (unsigned long)addrw); #endif *addrw = C302F_BNK_CMD_RST; addrw++; } } static void c302f_erase_init(flash_info_t *info, int sect) { c302f_addr_t addrw, saddrw, eaddrw; int flag; #ifdef FLASH_DEBUG printf("0x%08lx C302F_BNK_CMD_PROG\n", C302F_BNK_CMD_PROG); printf("0x%08lx C302F_BNK_CMD_ERASE1\n", C302F_BNK_CMD_ERASE1); printf("0x%08lx C302F_BNK_CMD_ERASE2\n", C302F_BNK_CMD_ERASE2); printf("0x%08lx C302F_BNK_CMD_CLR_STAT\n", C302F_BNK_CMD_CLR_STAT); printf("0x%08lx C302F_BNK_CMD_RST\n", C302F_BNK_CMD_RST); printf("0x%08lx C302F_BNK_STAT_RDY\n", C302F_BNK_STAT_RDY); printf("0x%08lx C302F_BNK_STAT_ERR\n", C302F_BNK_STAT_ERR); #endif saddrw = (c302f_addr_t)info->start[sect]; eaddrw = C302F_BNK_ADDR_NEXT_WORD(saddrw); #ifdef FLASH_DEBUG printf("erasing sector %d, start addr = 0x%08lx " "(bank next word addr = 0x%08lx)\n", sect, (unsigned long)saddrw, (unsigned long)eaddrw); #endif /* Disable intrs which might cause a timeout here */ flag = disable_interrupts(); for (addrw = saddrw; addrw < eaddrw; addrw++) { #ifdef FLASH_DEBUG printf(" writing erase cmd to addr 0x%08lx\n", (unsigned long)addrw); #endif *addrw = C302F_BNK_CMD_ERASE1; *addrw = C302F_BNK_CMD_ERASE2; } /* re-enable interrupts if necessary */ if (flag) enable_interrupts(); } static int c302f_erase_poll(flash_info_t *info, int sect) { c302f_addr_t addrw, saddrw, eaddrw; int sectdone, haderr; saddrw = (c302f_addr_t)info->start[sect]; eaddrw = C302F_BNK_ADDR_NEXT_WORD(saddrw); sectdone = 1; haderr = 0; for (addrw = saddrw; addrw < eaddrw; addrw++) { c302f_word_t stat = *addrw; #ifdef FLASH_DEBUG printf(" checking status at addr " "0x%08lx [0x%08lx]\n", (unsigned long)addrw, stat); #endif if ((stat & C302F_BNK_STAT_RDY) != C302F_BNK_STAT_RDY) sectdone = 0; else if ((stat & C302F_BNK_STAT_ERR) != 0) { printf(" failed on sector %d " "(stat = 0x%08lx) at " "address 0x%08lx\n", sect, stat, (unsigned long)addrw); *addrw = C302F_BNK_CMD_CLR_STAT; haderr = 1; } } if (haderr) return (-1); else return (sectdone); } static int c302f_write_word(c302f_addr_t addr, c302f_word_t value) { c302f_word_t stat; ulong start; int flag, retval; /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts(); *addr = C302F_BNK_CMD_PROG; *addr = value; /* re-enable interrupts if necessary */ if (flag) enable_interrupts(); retval = 0; /* data polling for D7 */ start = get_timer (0); do { if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { retval = 1; goto done; } stat = *addr; } while ((stat & C302F_BNK_STAT_RDY) != C302F_BNK_STAT_RDY); if ((stat & C302F_BNK_STAT_ERR) != 0) { printf("flash program failed (stat = 0x%08lx) " "at address 0x%08lx\n", (ulong)stat, (ulong)addr); *addr = C302F_BNK_CMD_CLR_STAT; retval = 3; } done: /* reset to read mode */ *addr = C302F_BNK_CMD_RST; return (retval); } #endif /* CONFIG_CMA302 */ unsigned long flash_init(void) { unsigned long total; int i; __maybe_unused flash_info_t *fip; /* Init: no FLASHes known */ for (i=0; isize; fip++; #endif #if (CMA_MB_CAPS & CMA_MB_CAP_FLASH) /* not yet ... cmbf_probe(fip, (cmbf_addr_t)CMA_MB_FLASH_BASE); total += fip->size; fip++; */ #endif /* * protect monitor and environment sectors */ #if CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, &flash_info[0]); #endif #ifdef CONFIG_ENV_IS_IN_FLASH /* ENV protection ON by default */ flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR, CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1, &flash_info[0]); #endif return total; } /*----------------------------------------------------------------------- */ void flash_print_info(flash_info_t *info) { int i; if (info->flash_id == FLASH_UNKNOWN) { printf ("missing or unknown FLASH type\n"); return; } switch (info->flash_id & FLASH_VENDMASK) { case FLASH_MAN_INTEL: printf ("INTEL "); break; default: printf ("Unknown Vendor "); break; } switch (info->flash_id & FLASH_TYPEMASK) { case FLASH_28F008S5: printf ("28F008S5\n"); break; default: printf ("Unknown Chip Type\n"); break; } printf (" Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count); printf (" Sector Start Addresses:"); for (i=0; isector_count; ++i) { if ((i % 4) == 0) printf ("\n "); printf (" %2d - %08lX%s", i, info->start[i], info->protect[i] ? " (RO)" : " " ); } printf ("\n"); return; } /*----------------------------------------------------------------------- */ /*----------------------------------------------------------------------- */ /* * The following code cannot be run from FLASH! */ int flash_erase(flash_info_t *info, int s_first, int s_last) { int prot, sect, haderr; ulong start, now, last; void (*erase_init)(flash_info_t *, int); int (*erase_poll)(flash_info_t *, int); void (*reset)(flash_info_t *, int); int rcode = 0; #ifdef FLASH_DEBUG printf("\nflash_erase: erase %d sectors (%d to %d incl.) from\n" " Bank # %d: ", s_last - s_first + 1, s_first, s_last, (info - flash_info) + 1); flash_print_info(info); #endif if ((s_first < 0) || (s_first > s_last)) { if (info->flash_id == FLASH_UNKNOWN) { printf ("- missing\n"); } else { printf ("- no sectors to erase\n"); } return 1; } switch (info->flash_id) { #if defined(CONFIG_CMA302) case FLASH_MAN_INTEL|FLASH_28F008S5: erase_init = c302f_erase_init; erase_poll = c302f_erase_poll; reset = c302f_reset; break; #endif #if (CMA_MB_CAPS & CMA_MB_CAP_FLASH) case FLASH_MAN_INTEL|FLASH_28F800_B: case FLASH_MAN_AMD|FLASH_AM29F800B: /* not yet ... erase_init = cmbf_erase_init; erase_poll = cmbf_erase_poll; reset = cmbf_reset; break; */ #endif default: printf ("Flash type %08lx not supported - aborted\n", info->flash_id); return 1; } prot = 0; for (sect=s_first; sect<=s_last; ++sect) { if (info->protect[sect]) { prot++; } } if (prot) { printf("- Warning: %d protected sector%s will not be erased!\n", prot, (prot > 1 ? "s" : "")); } start = get_timer (0); last = 0; haderr = 0; for (sect = s_first; sect <= s_last; sect++) { if (info->protect[sect] == 0) { /* not protected */ ulong estart; int sectdone; (*erase_init)(info, sect); /* wait at least 80us - let's wait 1 ms */ udelay (1000); estart = get_timer(start); do { now = get_timer(start); if (now - estart > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout (sect %d)\n", sect); haderr = 1; break; } #ifndef FLASH_DEBUG /* show that we're waiting */ if ((now - last) > 1000) { /* every second */ putc ('.'); last = now; } #endif sectdone = (*erase_poll)(info, sect); if (sectdone < 0) { haderr = 1; break; } } while (!sectdone); if (haderr) break; } } if (haderr > 0) { printf (" failed\n"); rcode = 1; } else printf (" done\n"); /* reset to read mode */ for (sect = s_first; sect <= s_last; sect++) { if (info->protect[sect] == 0) { /* not protected */ (*reset)(info, sect); } } return rcode; } /*----------------------------------------------------------------------- * Copy memory to flash, returns: * 0 - OK * 1 - write timeout * 2 - Flash not erased * 3 - write error */ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt) { ulong cp, wp, data; int i, l, rc; ulong start, now, last; wp = (addr & ~3); /* get lower word aligned address */ /* * handle unaligned start bytes */ if ((l = addr - wp) != 0) { data = 0; for (i=0, cp=wp; i0; ++i) { data = (data << 8) | *src++; --cnt; ++cp; } for (; cnt==0 && i<4; ++i, ++cp) { data = (data << 8) | (*(uchar *)cp); } if ((rc = write_word(info, wp, data)) != 0) { return (rc); } wp += 4; } /* * handle word aligned part */ start = get_timer (0); last = 0; while (cnt >= 4) { data = 0; for (i=0; i<4; ++i) { data = (data << 8) | *src++; } if ((rc = write_word(info, wp, data)) != 0) { return (rc); } wp += 4; cnt -= 4; /* show that we're waiting */ now = get_timer(start); if ((now - last) > 1000) { /* every second */ putc ('.'); last = now; } } if (cnt == 0) { return (0); } /* * handle unaligned tail bytes */ data = 0; for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { data = (data << 8) | *src++; --cnt; } for (; i<4; ++i, ++cp) { data = (data << 8) | (*(uchar *)cp); } return (write_word(info, wp, data)); } /*----------------------------------------------------------------------- * Write a word to Flash, returns: * 0 - OK * 1 - write timeout * 2 - Flash not erased * 3 - write error */ static int write_word(flash_info_t *info, ulong dest, ulong data) { int retval; /* Check if Flash is (sufficiently) erased */ if ((*(ulong *)dest & data) != data) { return (2); } switch (info->flash_id) { #if defined(CONFIG_CMA302) case FLASH_MAN_INTEL|FLASH_28F008S5: retval = c302f_write_word((c302f_addr_t)dest, (c302f_word_t)data); break; #endif #if (CMA_MB_CAPS & CMA_MB_CAP_FLASH) case FLASH_MAN_INTEL|FLASH_28F800_B: case FLASH_MAN_AMD|FLASH_AM29F800B: /* not yet ... retval = cmbf_write_word((cmbf_addr_t)dest, (cmbf_word_t)data); */ retval = 3; break; #endif default: printf ("Flash type %08lx not supported - aborted\n", info->flash_id); retval = 3; break; } return (retval); } /*----------------------------------------------------------------------- */