/* * Copyright 2004, 2007 Freescale Semiconductor. * Srikanth Srinivasan * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ /* U-Boot - Startup Code for 86xx PowerPC based Embedded Boards * * * The processor starts at 0xfff00100 and the code is executed * from flash. The code is organized to be at an other address * in memory, but as long we don't jump around before relocating. * board_init lies at a quite high address and when the cpu has * jumped there, everything is ok. */ #include #include #include #include #include #include #include #include #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING "" #endif /* * Need MSR_DR | MSR_IR enabled to access I/O (printf) in exceptions */ /* * Set up GOT: Global Offset Table * * Use r12 to access the GOT */ START_GOT GOT_ENTRY(_GOT2_TABLE_) GOT_ENTRY(_FIXUP_TABLE_) GOT_ENTRY(_start) GOT_ENTRY(_start_of_vectors) GOT_ENTRY(_end_of_vectors) GOT_ENTRY(transfer_to_handler) GOT_ENTRY(__init_end) GOT_ENTRY(_end) GOT_ENTRY(__bss_start) END_GOT /* * r3 - 1st arg to board_init(): IMMP pointer * r4 - 2nd arg to board_init(): boot flag */ .text .long 0x27051956 /* U-Boot Magic Number */ .globl version_string version_string: .ascii U_BOOT_VERSION .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")" .ascii CONFIG_IDENT_STRING, "\0" . = EXC_OFF_SYS_RESET .globl _start _start: b boot_cold /* the boot code is located below the exception table */ .globl _start_of_vectors _start_of_vectors: /* Machine check */ STD_EXCEPTION(0x200, MachineCheck, MachineCheckException) /* Data Storage exception. */ STD_EXCEPTION(0x300, DataStorage, UnknownException) /* Instruction Storage exception. */ STD_EXCEPTION(0x400, InstStorage, UnknownException) /* External Interrupt exception. */ STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt) /* Alignment exception. */ . = 0x600 Alignment: EXCEPTION_PROLOG(SRR0, SRR1) mfspr r4,DAR stw r4,_DAR(r21) mfspr r5,DSISR stw r5,_DSISR(r21) addi r3,r1,STACK_FRAME_OVERHEAD EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE) /* Program check exception */ . = 0x700 ProgramCheck: EXCEPTION_PROLOG(SRR0, SRR1) addi r3,r1,STACK_FRAME_OVERHEAD EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException, MSR_KERNEL, COPY_EE) STD_EXCEPTION(0x800, FPUnavailable, UnknownException) /* I guess we could implement decrementer, and may have * to someday for timekeeping. */ STD_EXCEPTION(0x900, Decrementer, timer_interrupt) STD_EXCEPTION(0xa00, Trap_0a, UnknownException) STD_EXCEPTION(0xb00, Trap_0b, UnknownException) STD_EXCEPTION(0xc00, SystemCall, UnknownException) STD_EXCEPTION(0xd00, SingleStep, UnknownException) STD_EXCEPTION(0xe00, Trap_0e, UnknownException) STD_EXCEPTION(0xf00, Trap_0f, UnknownException) STD_EXCEPTION(0x1000, SoftEmu, SoftEmuException) STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException) STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException) STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException) STD_EXCEPTION(0x1400, DataTLBError, UnknownException) STD_EXCEPTION(0x1500, Reserved5, UnknownException) STD_EXCEPTION(0x1600, Reserved6, UnknownException) STD_EXCEPTION(0x1700, Reserved7, UnknownException) STD_EXCEPTION(0x1800, Reserved8, UnknownException) STD_EXCEPTION(0x1900, Reserved9, UnknownException) STD_EXCEPTION(0x1a00, ReservedA, UnknownException) STD_EXCEPTION(0x1b00, ReservedB, UnknownException) STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException) STD_EXCEPTION(0x1d00, InstructionBreakpoint, UnknownException) STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException) STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException) .globl _end_of_vectors _end_of_vectors: . = 0x2000 boot_cold: /* * NOTE: Only Cpu 0 will ever come here. Other cores go to an * address specified by the BPTR */ 1: #ifdef CONFIG_SYS_RAMBOOT /* disable everything */ li r0, 0 mtspr HID0, r0 sync mtmsr 0 #endif /* Invalidate BATs */ bl invalidate_bats sync /* Invalidate all of TLB before MMU turn on */ bl clear_tlbs sync #ifdef CONFIG_SYS_L2 /* init the L2 cache */ lis r3, L2_INIT@h ori r3, r3, L2_INIT@l mtspr l2cr, r3 /* invalidate the L2 cache */ bl l2cache_invalidate sync #endif /* * Calculate absolute address in FLASH and jump there *------------------------------------------------------*/ lis r3, CONFIG_SYS_MONITOR_BASE_EARLY@h ori r3, r3, CONFIG_SYS_MONITOR_BASE_EARLY@l addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET mtlr r3 blr in_flash: /* let the C-code set up the rest */ /* */ /* Be careful to keep code relocatable ! */ /*------------------------------------------------------*/ /* perform low-level init */ /* enable extended addressing */ bl enable_ext_addr /* setup the bats */ bl early_bats /* * Cache must be enabled here for stack-in-cache trick. * This means we need to enable the BATS. * Cache should be turned on after BATs, since by default * everything is write-through. */ /* enable address translation */ mfmsr r5 ori r5, r5, (MSR_IR | MSR_DR) lis r3,addr_trans_enabled@h ori r3, r3, addr_trans_enabled@l mtspr SPRN_SRR0,r3 mtspr SPRN_SRR1,r5 rfi addr_trans_enabled: /* enable and invalidate the data cache */ /* bl l1dcache_enable */ bl dcache_enable sync #if 1 bl icache_enable #endif #ifdef CONFIG_SYS_INIT_RAM_LOCK bl lock_ram_in_cache sync #endif #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR) bl setup_ccsrbar #endif /* set up the stack pointer in our newly created * cache-ram (r1) */ lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l li r0, 0 /* Make room for stack frame header and */ stwu r0, -4(r1) /* clear final stack frame so that */ stwu r0, -4(r1) /* stack backtraces terminate cleanly */ GET_GOT /* initialize GOT access */ /* run low-level CPU init code (from Flash) */ bl cpu_init_f sync #ifdef RUN_DIAG /* Load PX_AUX register address in r4 */ lis r4, PIXIS_BASE@h ori r4, r4, 0x6 /* Load contents of PX_AUX in r3 bits 24 to 31*/ lbz r3, 0(r4) /* Mask and obtain the bit in r3 */ rlwinm. r3, r3, 0, 24, 24 /* If not zero, jump and continue with u-boot */ bne diag_done /* Load back contents of PX_AUX in r3 bits 24 to 31 */ lbz r3, 0(r4) /* Set the MSB of the register value */ ori r3, r3, 0x80 /* Write value in r3 back to PX_AUX */ stb r3, 0(r4) /* Get the address to jump to in r3*/ lis r3, CONFIG_SYS_DIAG_ADDR@h ori r3, r3, CONFIG_SYS_DIAG_ADDR@l /* Load the LR with the branch address */ mtlr r3 /* Branch to diagnostic */ blr diag_done: #endif /* bl l2cache_enable */ /* run 1st part of board init code (from Flash) */ bl board_init_f sync /* NOTREACHED - board_init_f() does not return */ .globl invalidate_bats invalidate_bats: li r0, 0 /* invalidate BATs */ mtspr IBAT0U, r0 mtspr IBAT1U, r0 mtspr IBAT2U, r0 mtspr IBAT3U, r0 mtspr IBAT4U, r0 mtspr IBAT5U, r0 mtspr IBAT6U, r0 mtspr IBAT7U, r0 isync mtspr DBAT0U, r0 mtspr DBAT1U, r0 mtspr DBAT2U, r0 mtspr DBAT3U, r0 mtspr DBAT4U, r0 mtspr DBAT5U, r0 mtspr DBAT6U, r0 mtspr DBAT7U, r0 isync sync blr /* * early_bats: * * Set up bats needed early on - this is usually the BAT for the * stack-in-cache, the Flash, and CCSR space */ .globl early_bats early_bats: /* IBAT 3 */ lis r4, CONFIG_SYS_IBAT3L@h ori r4, r4, CONFIG_SYS_IBAT3L@l lis r3, CONFIG_SYS_IBAT3U@h ori r3, r3, CONFIG_SYS_IBAT3U@l mtspr IBAT3L, r4 mtspr IBAT3U, r3 isync /* DBAT 3 */ lis r4, CONFIG_SYS_DBAT3L@h ori r4, r4, CONFIG_SYS_DBAT3L@l lis r3, CONFIG_SYS_DBAT3U@h ori r3, r3, CONFIG_SYS_DBAT3U@l mtspr DBAT3L, r4 mtspr DBAT3U, r3 isync /* IBAT 5 */ lis r4, CONFIG_SYS_IBAT5L@h ori r4, r4, CONFIG_SYS_IBAT5L@l lis r3, CONFIG_SYS_IBAT5U@h ori r3, r3, CONFIG_SYS_IBAT5U@l mtspr IBAT5L, r4 mtspr IBAT5U, r3 isync /* DBAT 5 */ lis r4, CONFIG_SYS_DBAT5L@h ori r4, r4, CONFIG_SYS_DBAT5L@l lis r3, CONFIG_SYS_DBAT5U@h ori r3, r3, CONFIG_SYS_DBAT5U@l mtspr DBAT5L, r4 mtspr DBAT5U, r3 isync /* IBAT 6 */ lis r4, CONFIG_SYS_IBAT6L_EARLY@h ori r4, r4, CONFIG_SYS_IBAT6L_EARLY@l lis r3, CONFIG_SYS_IBAT6U_EARLY@h ori r3, r3, CONFIG_SYS_IBAT6U_EARLY@l mtspr IBAT6L, r4 mtspr IBAT6U, r3 isync /* DBAT 6 */ lis r4, CONFIG_SYS_DBAT6L_EARLY@h ori r4, r4, CONFIG_SYS_DBAT6L_EARLY@l lis r3, CONFIG_SYS_DBAT6U_EARLY@h ori r3, r3, CONFIG_SYS_DBAT6U_EARLY@l mtspr DBAT6L, r4 mtspr DBAT6U, r3 isync #if(CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR) /* IBAT 7 */ lis r4, CONFIG_SYS_CCSR_DEFAULT_IBATL@h ori r4, r4, CONFIG_SYS_CCSR_DEFAULT_IBATL@l lis r3, CONFIG_SYS_CCSR_DEFAULT_IBATU@h ori r3, r3, CONFIG_SYS_CCSR_DEFAULT_IBATU@l mtspr IBAT7L, r4 mtspr IBAT7U, r3 isync /* DBAT 7 */ lis r4, CONFIG_SYS_CCSR_DEFAULT_DBATL@h ori r4, r4, CONFIG_SYS_CCSR_DEFAULT_DBATL@l lis r3, CONFIG_SYS_CCSR_DEFAULT_DBATU@h ori r3, r3, CONFIG_SYS_CCSR_DEFAULT_DBATU@l mtspr DBAT7L, r4 mtspr DBAT7U, r3 isync #endif blr .globl clear_tlbs clear_tlbs: addis r3, 0, 0x0000 addis r5, 0, 0x4 isync tlblp: tlbie r3 sync addi r3, r3, 0x1000 cmp 0, 0, r3, r5 blt tlblp blr .globl disable_addr_trans disable_addr_trans: /* disable address translation */ mflr r4 mfmsr r3 andi. r0, r3, (MSR_IR | MSR_DR) beqlr andc r3, r3, r0 mtspr SRR0, r4 mtspr SRR1, r3 rfi /* * This code finishes saving the registers to the exception frame * and jumps to the appropriate handler for the exception. * Register r21 is pointer into trap frame, r1 has new stack pointer. */ .globl transfer_to_handler transfer_to_handler: stw r22,_NIP(r21) lis r22,MSR_POW@h andc r23,r23,r22 stw r23,_MSR(r21) SAVE_GPR(7, r21) SAVE_4GPRS(8, r21) SAVE_8GPRS(12, r21) SAVE_8GPRS(24, r21) mflr r23 andi. r24,r23,0x3f00 /* get vector offset */ stw r24,TRAP(r21) li r22,0 stw r22,RESULT(r21) mtspr SPRG2,r22 /* r1 is now kernel sp */ lwz r24,0(r23) /* virtual address of handler */ lwz r23,4(r23) /* where to go when done */ mtspr SRR0,r24 mtspr SRR1,r20 mtlr r23 SYNC rfi /* jump to handler, enable MMU */ int_return: mfmsr r28 /* Disable interrupts */ li r4,0 ori r4,r4,MSR_EE andc r28,r28,r4 SYNC /* Some chip revs need this... */ mtmsr r28 SYNC lwz r2,_CTR(r1) lwz r0,_LINK(r1) mtctr r2 mtlr r0 lwz r2,_XER(r1) lwz r0,_CCR(r1) mtspr XER,r2 mtcrf 0xFF,r0 REST_10GPRS(3, r1) REST_10GPRS(13, r1) REST_8GPRS(23, r1) REST_GPR(31, r1) lwz r2,_NIP(r1) /* Restore environment */ lwz r0,_MSR(r1) mtspr SRR0,r2 mtspr SRR1,r0 lwz r0,GPR0(r1) lwz r2,GPR2(r1) lwz r1,GPR1(r1) SYNC rfi .globl dc_read dc_read: blr .globl get_pvr get_pvr: mfspr r3, PVR blr .globl get_svr get_svr: mfspr r3, SVR blr /* * Function: in8 * Description: Input 8 bits */ .globl in8 in8: lbz r3,0x0000(r3) blr /* * Function: out8 * Description: Output 8 bits */ .globl out8 out8: stb r4,0x0000(r3) blr /* * Function: out16 * Description: Output 16 bits */ .globl out16 out16: sth r4,0x0000(r3) blr /* * Function: out16r * Description: Byte reverse and output 16 bits */ .globl out16r out16r: sthbrx r4,r0,r3 blr /* * Function: out32 * Description: Output 32 bits */ .globl out32 out32: stw r4,0x0000(r3) blr /* * Function: out32r * Description: Byte reverse and output 32 bits */ .globl out32r out32r: stwbrx r4,r0,r3 blr /* * Function: in16 * Description: Input 16 bits */ .globl in16 in16: lhz r3,0x0000(r3) blr /* * Function: in16r * Description: Input 16 bits and byte reverse */ .globl in16r in16r: lhbrx r3,r0,r3 blr /* * Function: in32 * Description: Input 32 bits */ .globl in32 in32: lwz 3,0x0000(3) blr /* * Function: in32r * Description: Input 32 bits and byte reverse */ .globl in32r in32r: lwbrx r3,r0,r3 blr /* * void relocate_code (addr_sp, gd, addr_moni) * * This "function" does not return, instead it continues in RAM * after relocating the monitor code. * * r3 = dest * r4 = src * r5 = length in bytes * r6 = cachelinesize */ .globl relocate_code relocate_code: mr r1, r3 /* Set new stack pointer */ mr r9, r4 /* Save copy of Global Data pointer */ mr r10, r5 /* Save copy of Destination Address */ GET_GOT mr r3, r5 /* Destination Address */ lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */ ori r4, r4, CONFIG_SYS_MONITOR_BASE@l lwz r5, GOT(__init_end) sub r5, r5, r4 li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */ /* * Fix GOT pointer: * * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address * * Offset: */ sub r15, r10, r4 /* First our own GOT */ add r12, r12, r15 /* then the one used by the C code */ add r30, r30, r15 /* * Now relocate code */ cmplw cr1,r3,r4 addi r0,r5,3 srwi. r0,r0,2 beq cr1,4f /* In place copy is not necessary */ beq 7f /* Protect against 0 count */ mtctr r0 bge cr1,2f la r8,-4(r4) la r7,-4(r3) 1: lwzu r0,4(r8) stwu r0,4(r7) bdnz 1b b 4f 2: slwi r0,r0,2 add r8,r4,r0 add r7,r3,r0 3: lwzu r0,-4(r8) stwu r0,-4(r7) bdnz 3b /* * Now flush the cache: note that we must start from a cache aligned * address. Otherwise we might miss one cache line. */ 4: cmpwi r6,0 add r5,r3,r5 beq 7f /* Always flush prefetch queue in any case */ subi r0,r6,1 andc r3,r3,r0 mr r4,r3 5: dcbst 0,r4 add r4,r4,r6 cmplw r4,r5 blt 5b sync /* Wait for all dcbst to complete on bus */ mr r4,r3 6: icbi 0,r4 add r4,r4,r6 cmplw r4,r5 blt 6b 7: sync /* Wait for all icbi to complete on bus */ isync /* * We are done. Do not return, instead branch to second part of board * initialization, now running from RAM. */ addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET mtlr r0 blr in_ram: /* * Relocation Function, r12 point to got2+0x8000 * * Adjust got2 pointers, no need to check for 0, this code * already puts a few entries in the table. */ li r0,__got2_entries@sectoff@l la r3,GOT(_GOT2_TABLE_) lwz r11,GOT(_GOT2_TABLE_) mtctr r0 sub r11,r3,r11 addi r3,r3,-4 1: lwzu r0,4(r3) cmpwi r0,0 beq- 2f add r0,r0,r11 stw r0,0(r3) 2: bdnz 1b /* * Now adjust the fixups and the pointers to the fixups * in case we need to move ourselves again. */ li r0,__fixup_entries@sectoff@l lwz r3,GOT(_FIXUP_TABLE_) cmpwi r0,0 mtctr r0 addi r3,r3,-4 beq 4f 3: lwzu r4,4(r3) lwzux r0,r4,r11 add r0,r0,r11 stw r10,0(r3) stw r0,0(r4) bdnz 3b 4: /* clear_bss: */ /* * Now clear BSS segment */ lwz r3,GOT(__bss_start) lwz r4,GOT(_end) cmplw 0, r3, r4 beq 6f li r0, 0 5: stw r0, 0(r3) addi r3, r3, 4 cmplw 0, r3, r4 bne 5b 6: mr r3, r9 /* Init Date pointer */ mr r4, r10 /* Destination Address */ bl board_init_r /* not reached - end relocate_code */ /*-----------------------------------------------------------------------*/ /* * Copy exception vector code to low memory * * r3: dest_addr * r7: source address, r8: end address, r9: target address */ .globl trap_init trap_init: mflr r4 /* save link register */ GET_GOT lwz r7, GOT(_start) lwz r8, GOT(_end_of_vectors) li r9, 0x100 /* reset vector always at 0x100 */ cmplw 0, r7, r8 bgelr /* return if r7>=r8 - just in case */ 1: lwz r0, 0(r7) stw r0, 0(r9) addi r7, r7, 4 addi r9, r9, 4 cmplw 0, r7, r8 bne 1b /* * relocate `hdlr' and `int_return' entries */ li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET li r8, Alignment - _start + EXC_OFF_SYS_RESET 2: bl trap_reloc addi r7, r7, 0x100 /* next exception vector */ cmplw 0, r7, r8 blt 2b li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET bl trap_reloc li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET bl trap_reloc li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET li r8, SystemCall - _start + EXC_OFF_SYS_RESET 3: bl trap_reloc addi r7, r7, 0x100 /* next exception vector */ cmplw 0, r7, r8 blt 3b li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET 4: bl trap_reloc addi r7, r7, 0x100 /* next exception vector */ cmplw 0, r7, r8 blt 4b /* enable execptions from RAM vectors */ mfmsr r7 li r8,MSR_IP andc r7,r7,r8 ori r7,r7,MSR_ME /* Enable Machine Check */ mtmsr r7 mtlr r4 /* restore link register */ blr .globl enable_ext_addr enable_ext_addr: mfspr r0, HID0 lis r0, (HID0_HIGH_BAT_EN | HID0_XBSEN | HID0_XAEN)@h ori r0, r0, (HID0_HIGH_BAT_EN | HID0_XBSEN | HID0_XAEN)@l mtspr HID0, r0 sync isync blr #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR) .globl setup_ccsrbar setup_ccsrbar: /* Special sequence needed to update CCSRBAR itself */ lis r4, CONFIG_SYS_CCSRBAR_DEFAULT@h ori r4, r4, CONFIG_SYS_CCSRBAR_DEFAULT@l lis r5, CONFIG_SYS_CCSRBAR_PHYS_LOW@h ori r5, r5, CONFIG_SYS_CCSRBAR_PHYS_LOW@l srwi r5,r5,12 li r6, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l rlwimi r5,r6,20,8,11 stw r5, 0(r4) /* Store physical value of CCSR */ isync lis r5, CONFIG_SYS_TEXT_BASE@h ori r5,r5,CONFIG_SYS_TEXT_BASE@l lwz r5, 0(r5) isync /* Use VA of CCSR to do read */ lis r3, CONFIG_SYS_CCSRBAR@h lwz r5, CONFIG_SYS_CCSRBAR@l(r3) isync blr #endif #ifdef CONFIG_SYS_INIT_RAM_LOCK lock_ram_in_cache: /* Allocate Initial RAM in data cache. */ lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \ (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32 mtctr r4 1: dcbz r0, r3 addi r3, r3, 32 bdnz 1b #if 1 /* Lock the data cache */ mfspr r0, HID0 ori r0, r0, 0x1000 sync mtspr HID0, r0 sync blr #endif #if 0 /* Lock the first way of the data cache */ mfspr r0, LDSTCR ori r0, r0, 0x0080 #if defined(CONFIG_ALTIVEC) dssall #endif sync mtspr LDSTCR, r0 sync isync blr #endif .globl unlock_ram_in_cache unlock_ram_in_cache: /* invalidate the INIT_RAM section */ lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \ (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32 mtctr r4 1: icbi r0, r3 addi r3, r3, 32 bdnz 1b sync /* Wait for all icbi to complete on bus */ isync #if 1 /* Unlock the data cache and invalidate it */ mfspr r0, HID0 li r3,0x1000 andc r0,r0,r3 li r3,0x0400 or r0,r0,r3 sync mtspr HID0, r0 sync blr #endif #if 0 /* Unlock the first way of the data cache */ mfspr r0, LDSTCR li r3,0x0080 andc r0,r0,r3 #ifdef CONFIG_ALTIVEC dssall #endif sync mtspr LDSTCR, r0 sync isync li r3,0x0400 or r0,r0,r3 sync mtspr HID0, r0 sync blr #endif #endif