/* * (C) Copyright 2008 * Texas Instruments, * * Author : * Manikandan Pillai * * Initial Code from: * Richard Woodruff * Syed Mohammed Khasim * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include #include struct gpmc *gpmc_cfg; #if defined(CONFIG_CMD_NAND) static const u32 gpmc_m_nand[GPMC_MAX_REG] = { M_NAND_GPMC_CONFIG1, M_NAND_GPMC_CONFIG2, M_NAND_GPMC_CONFIG3, M_NAND_GPMC_CONFIG4, M_NAND_GPMC_CONFIG5, M_NAND_GPMC_CONFIG6, 0 }; #if defined(CONFIG_ENV_IS_IN_NAND) #define GPMC_CS 0 #else #define GPMC_CS 1 #endif #endif #if defined(CONFIG_CMD_ONENAND) static const u32 gpmc_onenand[GPMC_MAX_REG] = { ONENAND_GPMC_CONFIG1, ONENAND_GPMC_CONFIG2, ONENAND_GPMC_CONFIG3, ONENAND_GPMC_CONFIG4, ONENAND_GPMC_CONFIG5, ONENAND_GPMC_CONFIG6, 0 }; #if defined(CONFIG_ENV_IS_IN_ONENAND) #define GPMC_CS 0 #else #define GPMC_CS 1 #endif #endif /******************************************************** * mem_ok() - test used to see if timings are correct * for a part. Helps in guessing which part * we are currently using. *******************************************************/ u32 mem_ok(u32 cs) { u32 val1, val2, addr; u32 pattern = 0x12345678; addr = OMAP34XX_SDRC_CS0 + get_sdr_cs_offset(cs); writel(0x0, addr + 0x400); /* clear pos A */ writel(pattern, addr); /* pattern to pos B */ writel(0x0, addr + 4); /* remove pattern off the bus */ val1 = readl(addr + 0x400); /* get pos A value */ val2 = readl(addr); /* get val2 */ writel(0x0, addr + 0x400); /* clear pos A */ if ((val1 != 0) || (val2 != pattern)) /* see if pos A val changed */ return 0; else return 1; } void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base, u32 size) { writel(0, &cs->config7); sdelay(1000); /* Delay for settling */ writel(gpmc_config[0], &cs->config1); writel(gpmc_config[1], &cs->config2); writel(gpmc_config[2], &cs->config3); writel(gpmc_config[3], &cs->config4); writel(gpmc_config[4], &cs->config5); writel(gpmc_config[5], &cs->config6); /* * Enable the config. size is the CS size and goes in * bits 11:8. We set bit 6 to enable this CS and the base * address goes into bits 5:0. */ writel((size << 8) | (GPMC_CS_ENABLE << 6) | ((base >> 24) & GPMC_BASEADDR_MASK), &cs->config7); sdelay(2000); } /***************************************************** * gpmc_init(): init gpmc bus * Init GPMC for x16, MuxMode (SDRAM in x32). * This code can only be executed from SRAM or SDRAM. *****************************************************/ void gpmc_init(void) { /* putting a blanket check on GPMC based on ZeBu for now */ gpmc_cfg = (struct gpmc *)GPMC_BASE; #if defined(CONFIG_CMD_NAND) || defined(CONFIG_CMD_ONENAND) const u32 *gpmc_config = NULL; u32 base = 0; u32 size = 0; #endif u32 config = 0; /* global settings */ writel(0, &gpmc_cfg->irqenable); /* isr's sources masked */ writel(0, &gpmc_cfg->timeout_control);/* timeout disable */ config = readl(&gpmc_cfg->config); config &= (~0xf00); writel(config, &gpmc_cfg->config); /* * Disable the GPMC0 config set by ROM code * It conflicts with our MPDB (both at 0x08000000) */ writel(0, &gpmc_cfg->cs[0].config7); sdelay(1000); #if defined(CONFIG_CMD_NAND) /* CS 0 */ gpmc_config = gpmc_m_nand; base = PISMO1_NAND_BASE; size = PISMO1_NAND_SIZE; enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size); #endif #if defined(CONFIG_CMD_ONENAND) gpmc_config = gpmc_onenand; base = PISMO1_ONEN_BASE; size = PISMO1_ONEN_SIZE; enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size); #endif }