From b77026225a319066eaaa11839121a273469a2cf4 Mon Sep 17 00:00:00 2001 From: Gabriel Huau Date: Wed, 2 May 2012 10:48:37 +0000 Subject: ARM : Add support for MINI2440 (s3c2440). Support of the MINI2440 board from FriendlyARM from an old version of u-boot : http://repo.or.cz/r/u-boot-openmoko/mini2440.git Currently, supporting only boot from NOR. Signed-off-by: Gabriel Huau --- doc/README.mini2440 | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 doc/README.mini2440 (limited to 'doc') diff --git a/doc/README.mini2440 b/doc/README.mini2440 new file mode 100644 index 000000000..311ca5286 --- /dev/null +++ b/doc/README.mini2440 @@ -0,0 +1,28 @@ +U-Boot for FriendlyARM Mini2440 (s3c2440) + +This file contains information for the port of U-Boot to FriendlyARM +mini2440 + +All information about the board can be found on : +http://www.friendlyarm.net/products/mini2440 + +To build u-boot : ./MAKEALL mini2440 + +Overview : +-------- +FriendlyARM Mini 2440 SBC (Single-Board Computer) with 400 MHz Samsung S3C2440 +ARM9 processor. The board measures 100 x 100 mm, ideal for learning about ARM9 +systems. It's a low cost board. + +Boot Methods : +------------ +Mini2440 can boot from NOR or NAND. + +Build : +----- +./MAKEALL mini2440 + +or + +make mini2440_config +make -- cgit v1.2.3