From fe8c2806cdba70479e351299881a395dc2be7785 Mon Sep 17 00:00:00 2001 From: wdenk Date: Sun, 3 Nov 2002 00:38:21 +0000 Subject: Initial revision --- board/mvs1/mvs1.c | 404 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 404 insertions(+) create mode 100644 board/mvs1/mvs1.c (limited to 'board/mvs1/mvs1.c') diff --git a/board/mvs1/mvs1.c b/board/mvs1/mvs1.c new file mode 100644 index 000000000..da98de56c --- /dev/null +++ b/board/mvs1/mvs1.c @@ -0,0 +1,404 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Changes for MATRIX Vision MVsensor (C) Copyright 2001 + * MATRIX Vision GmbH / hg, info@matrix-vision.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +/* ------------------------------------------------------------------------- */ + +static long int dram_size (long int, long int *, long int); + +/* ------------------------------------------------------------------------- */ + +#define _NOT_USED_ 0xFFFFFFFF + +const uint sdram_table[] = +{ + /* + * Single Read. (Offset 0 in UPMA RAM) + */ + 0x1F0DFC04, 0xEEAFBC04, 0x11AF7C04, 0xEFBAFC00, + 0x1FF5FC47, /* last */ + /* + * SDRAM Initialization (offset 5 in UPMA RAM) + * + * This is no UPM entry point. The following definition uses + * the remaining space to establish an initialization + * sequence, which is executed by a RUN command. + * + */ + 0x1FF5FC34, 0xEFEABC34, 0x1FB57C35, /* last */ + /* + * Burst Read. (Offset 8 in UPMA RAM) + */ + 0x1F0DFC04, 0xEEAFBC04, 0x10AF7C04, 0xF0AFFC00, + 0xF0AFFC00, 0xF1AFFC00, 0xEFBAFC00, 0x1FF5FC47, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + /* + * Single Write. (Offset 18 in UPMA RAM) + */ + 0x1F0DFC04 /*0x1F2DFC04??*/, 0xEEABBC00, 0x01B27C04, 0x1FF5FC47, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + /* + * Burst Write. (Offset 20 in UPMA RAM) + */ + 0x1F0DFC04, 0xEEABBC00, 0x10A77C00, 0xF0AFFC00, + 0xF0AFFC00, 0xE1BAFC04, 0x1FF5FC47, /* last */ + _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + /* + * Refresh (Offset 30 in UPMA RAM) + */ + 0x1FFD7C84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, + 0xFFFFFC84, 0xFFFFFC07, /* last */ + _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + /* + * Exception. (Offset 3c in UPMA RAM) + */ + 0x7FFFFC07, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, +}; + +/* ------------------------------------------------------------------------- */ + + +/* + * Check Board Identity: + */ + +int checkboard (void) +{ + puts ("Board: MATRIX Vision MVsensor\n"); + return 0; +} + + + +#ifdef DO_RAM_TEST +/* ------------------------------------------------------------------------- */ + +/* + * Test SDRAM by writing its address to itself and reading several times +*/ +#define READ_RUNS 4 +static void test_dram (unsigned long *start, unsigned long *end) +{ + unsigned long *addr; + unsigned long value; + int read_runs, errors, addr_errors; + + printf ("\nChecking SDRAM from %p to %p\n", start, end); + udelay (1000000); + for (addr = start; addr < end; addr++) + *addr = (unsigned long) addr; + + for (addr = start, addr_errors = 0; addr < end; addr++) { + for (read_runs = READ_RUNS, errors = 0; read_runs > 0; read_runs--) { + if ((value = *addr) != (unsigned long) addr) + errors++; + } + if (errors > 0) { + addr_errors++; + printf ("SDRAM errors (%d) at %p, last read = %ld\n", + errors, addr, value); + udelay (10000); + } + } + printf ("SDRAM check finished, total errors = %d\n", addr_errors); +} +#endif /* DO_RAM_TEST */ + + +/* ------------------------------------------------------------------------- */ + +long int initdram (int board_type) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + long int size_b0, size_b1, size8, size9; + + upmconfig (UPMA, (uint *) sdram_table, + sizeof (sdram_table) / sizeof (uint)); + + /* + * Preliminary prescaler for refresh (depends on number of + * banks): This value is selected for four cycles every 62.4 us + * with two SDRAM banks or four cycles every 31.2 us with one + * bank. It will be adjusted after memory sizing. + */ + memctl->memc_mptpr = CFG_MPTPR_2BK_8K; + + memctl->memc_mar = 0x00000088; + + /* + * Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at + * preliminary addresses - these have to be modified after the + * SDRAM size has been determined. + */ + memctl->memc_or2 = CFG_OR2_PRELIM; + memctl->memc_br2 = CFG_BR2_PRELIM; + +#if defined (CFG_OR3_PRELIM) && defined (CFG_BR3_PRELIM) + if (board_type == 0) { /* "L" type boards have only one bank SDRAM */ + memctl->memc_or3 = CFG_OR3_PRELIM; + memctl->memc_br3 = CFG_BR3_PRELIM; + } +#endif + + memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */ + + udelay (200); + + /* perform SDRAM initializsation sequence */ + + memctl->memc_mcr = 0x80004105; /* SDRAM bank 0 */ + udelay (1); + memctl->memc_mcr = 0x80004230; /* SDRAM bank 0 - execute twice */ + udelay (1); + + if (board_type == 0) { /* "L" type boards have only one bank SDRAM */ + memctl->memc_mcr = 0x80006105; /* SDRAM bank 1 */ + udelay (1); + memctl->memc_mcr = 0x80006230; /* SDRAM bank 1 - execute twice */ + udelay (1); + } + + memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ + + udelay (1000); + + /* + * Check Bank 0 Memory Size for re-configuration + * + * try 8 column mode + */ + size8 = dram_size (CFG_MAMR_8COL, (ulong *) SDRAM_BASE2_PRELIM, + SDRAM_MAX_SIZE); + + udelay (1000); + /* + * try 9 column mode + */ + size9 = dram_size (CFG_MAMR_9COL, (ulong *) SDRAM_BASE2_PRELIM, + SDRAM_MAX_SIZE); + + if (size8 < size9) { /* leave configuration at 9 columns */ + size_b0 = size9; + } else { /* back to 8 columns */ + size_b0 = size8; + memctl->memc_mamr = CFG_MAMR_8COL; + udelay (500); + } + + if (board_type == 0) { /* "L" type boards have only one bank SDRAM */ + /* + * Check Bank 1 Memory Size + * use current column settings + * [9 column SDRAM may also be used in 8 column mode, + * but then only half the real size will be used.] + */ +#if defined (SDRAM_BASE3_PRELIM) + size_b1 = + dram_size (memctl->memc_mamr, (ulong *) SDRAM_BASE3_PRELIM, + SDRAM_MAX_SIZE); +#else + size_b1 = 0; +#endif + } else { + size_b1 = 0; + } + + udelay (1000); + + /* + * Adjust refresh rate depending on SDRAM type, both banks + * For types > 128 MBit leave it at the current (fast) rate + */ + if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) { + /* reduce to 15.6 us (62.4 us / quad) */ + memctl->memc_mptpr = CFG_MPTPR_2BK_4K; + udelay (1000); + } + + /* + * Final mapping: map bigger bank first + */ + if (size_b1 > size_b0) { /* SDRAM Bank 1 is bigger - map first */ + + memctl->memc_or3 = ((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; + memctl->memc_br3 = + (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; + + if (size_b0 > 0) { + /* + * Position Bank 0 immediately above Bank 1 + */ + memctl->memc_or2 = + ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; + memctl->memc_br2 = + ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V) + + size_b1; + } else { + unsigned long reg; + + /* + * No bank 0 + * + * invalidate bank + */ + memctl->memc_br2 = 0; + + /* adjust refresh rate depending on SDRAM type, one bank */ + reg = memctl->memc_mptpr; + reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */ + memctl->memc_mptpr = reg; + } + + } else { /* SDRAM Bank 0 is bigger - map first */ + + memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; + memctl->memc_br2 = + (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; + + if (size_b1 > 0) { + /* + * Position Bank 1 immediately above Bank 0 + */ + memctl->memc_or3 = + ((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; + memctl->memc_br3 = + ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V) + + size_b0; + } else { + unsigned long reg; + + /* + * No bank 1 + * + * invalidate bank + */ + memctl->memc_br3 = 0; + + /* adjust refresh rate depending on SDRAM type, one bank */ + reg = memctl->memc_mptpr; + reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */ + memctl->memc_mptpr = reg; + } + } + + udelay (10000); + +#ifdef DO_RAM_TEST + if (size_b0 > 0) + test_dram ((unsigned long *) CFG_SDRAM_BASE, + (unsigned long *) (CFG_SDRAM_BASE + size_b0)); +#endif + + return (size_b0 + size_b1); +} + +/* ------------------------------------------------------------------------- */ + +/* + * Check memory range for valid RAM. A simple memory test determines + * the actually available RAM size between addresses `base' and + * `base + maxsize'. Some (not all) hardware errors are detected: + * - short between address lines + * - short between data lines + */ + +static long int dram_size (long int mamr_value, long int *base, + long int maxsize) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + volatile long int *addr; + long int cnt, val; + + + memctl->memc_mamr = mamr_value; + + for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { + addr = base + cnt; /* pointer arith! */ + + *addr = ~cnt; + } + + /* write 0 to base address */ + addr = base; + *addr = 0; + + /* check at base address */ + if ((val = *addr) != 0) { + return (0); + } + + for (cnt = 1;; cnt <<= 1) { + addr = base + cnt; /* pointer arith! */ + + val = *addr; + + if (val != (~cnt)) { + return (cnt * sizeof (long)); + } + } + /* NOTREACHED */ +} + + +/* ------------------------------------------------------------------------- */ + +u8 *dhcp_vendorex_prep (u8 * e) +{ + char *ptr; + +/* DHCP vendor-class-identifier = 60 */ + if ((ptr = getenv ("dhcp_vendor-class-identifier"))) { + *e++ = 60; + *e++ = strlen (ptr); + while (*ptr) + *e++ = *ptr++; + } +/* my DHCP_CLIENT_IDENTIFIER = 61 */ + if ((ptr = getenv ("dhcp_client_id"))) { + *e++ = 61; + *e++ = strlen (ptr); + while (*ptr) + *e++ = *ptr++; + } + + return e; +} + + +/* ------------------------------------------------------------------------- */ +u8 *dhcp_vendorex_proc (u8 * popt) +{ + return NULL; +} -- cgit v1.2.3