From e35745bb64fae64da3e1fa7f4afe3213287f5908 Mon Sep 17 00:00:00 2001 From: wdenk Date: Sun, 18 Apr 2004 23:32:11 +0000 Subject: * Temporarily disabled John Kerl's extended MII command code because "miivals.h" is missing * Patches by Mark Jonas, 13 Apr 2004: - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S - Add sync instructions to IceCube SDRAM init code - Move SDRAM chip constants into seperate include files - Unify DDR and SDR initialization code - Unify all IceCube (Lite5xxx) target names --- board/icecube/icecube.c | 226 +++++++++++++++++++++++++-------------- board/icecube/mt46v16m16-75.h | 37 +++++++ board/icecube/mt48lc16m16a2-75.h | 43 ++++++++ 3 files changed, 228 insertions(+), 78 deletions(-) create mode 100644 board/icecube/mt46v16m16-75.h create mode 100644 board/icecube/mt48lc16m16a2-75.h (limited to 'board/icecube') diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c index e40bcdf4b..5a206c0f4 100644 --- a/board/icecube/icecube.c +++ b/board/icecube/icecube.c @@ -2,6 +2,9 @@ * (C) Copyright 2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * * See file CREDITS for list of people who contributed to this * project. * @@ -25,90 +28,84 @@ #include #include +#if defined(CONFIG_MPC5200_DDR) +#include "mt46v16m16-75.h" +#else +#include "mt48lc16m16a2-75.h" +#endif + #ifndef CFG_RAMBOOT static void sdram_start (int hi_addr) { long hi_addr_bit = hi_addr ? 0x01000000 : 0; -#ifdef CONFIG_MPC5200_DDR /* unlock mode register */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xf05f0f00 | hi_addr_bit; + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit; + __asm__ volatile ("sync"); + /* precharge all banks */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xf05f0f02 | hi_addr_bit; + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit; + __asm__ volatile ("sync"); + +#if SDRAM_DDR /* set mode register: extended mode */ - *(vu_long *)MPC5XXX_SDRAM_MODE = 0x40090000; + *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE; + __asm__ volatile ("sync"); + /* set mode register: reset DLL */ - *(vu_long *)MPC5XXX_SDRAM_MODE = 0x058d0000; - /* precharge all banks */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xf05f0f02 | hi_addr_bit; - /* auto refresh */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xf05f0f04 | hi_addr_bit; - /* set mode register */ - *(vu_long *)MPC5XXX_SDRAM_MODE = 0x018d0000; - /* normal operation */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = 0x705f0f00 | hi_addr_bit; -#else - /* unlock mode register */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0000 | hi_addr_bit; - /* precharge all banks */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0002 | hi_addr_bit; - /* set mode register */ -#if defined(CONFIG_MPC5200) - *(vu_long *)MPC5XXX_SDRAM_MODE = 0x00cd0000; -#elif defined(CONFIG_MGT5100) - *(vu_long *)MPC5XXX_SDRAM_MODE = 0x008d0000; + *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000; + __asm__ volatile ("sync"); #endif + + /* precharge all banks */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit; + __asm__ volatile ("sync"); + /* auto refresh */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0004 | hi_addr_bit; - /* auto refresh */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0004 | hi_addr_bit; + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit; + __asm__ volatile ("sync"); + /* set mode register */ - *(vu_long *)MPC5XXX_SDRAM_MODE = 0x00cd0000; + *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE; + __asm__ volatile ("sync"); + /* normal operation */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = 0x504f0000 | hi_addr_bit; -#endif + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit; + __asm__ volatile ("sync"); } #endif +/* + * ATTENTION: Although partially referenced initdram does NOT make real use + * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE + * is something else than 0x00000000. + */ + +#if defined(CONFIG_MPC5200) long int initdram (int board_type) { ulong dramsize = 0; -#ifdef CONFIG_MPC5200_DDR ulong dramsize2 = 0; -#endif #ifndef CFG_RAMBOOT ulong test1, test2; - - /* configure SDRAM start/end */ -#if defined(CONFIG_MPC5200) + + /* setup SDRAM chip selects */ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */ + __asm__ volatile ("sync"); -#ifdef CONFIG_MPC5200_DDR /* setup config registers */ - *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = 0x73722930; - *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = 0x47770000; + *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; + *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; + __asm__ volatile ("sync"); - /* set tap delay to 0x10 */ - *(vu_long *)MPC5XXX_CDM_PORCFG = 0x10000000; -#else - /* setup config registers */ - *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = 0xd2322800; - *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = 0x8ad70000; +#if SDRAM_DDR + /* set tap delay */ + *(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY; + __asm__ volatile ("sync"); #endif -#elif defined(CONFIG_MGT5100) - *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000; - *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */ - *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */ - - /* setup config registers */ - *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = 0xc2222600; - *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = 0x88b70004; - - /* address select register */ - *(vu_long *)MPC5XXX_SDRAM_XLBSEL = 0x03000000; -#endif + /* find RAM size using SDRAM CS0 only */ sdram_start(0); test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000); sdram_start(1); @@ -119,11 +116,24 @@ long int initdram (int board_type) } else { dramsize = test2; } -#if defined(CONFIG_MPC5200) - *(vu_long *)MPC5XXX_SDRAM_CS0CFG = - (0x13 + __builtin_ffs(dramsize >> 20) - 1); -#ifdef CONFIG_MPC5200_DDR + + /* memory smaller than 1MB is impossible */ + if (dramsize < (1 << 20)) { + dramsize = 0; + } + + /* set SDRAM CS0 size according to the amount of RAM found */ + if (dramsize > 0) { + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1; + } else { + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ + } + + + /* let SDRAM CS1 start right after CS0 */ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */ + + /* find RAM size using SDRAM CS1 only */ sdram_start(0); test1 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000); sdram_start(1); @@ -134,34 +144,94 @@ long int initdram (int board_type) } else { dramsize2 = test2; } - *(vu_long *)MPC5XXX_SDRAM_CS1CFG = - dramsize + (0x13 + __builtin_ffs(dramsize2 >> 20) - 1); -#else - *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */ -#endif + + /* memory smaller than 1MB is impossible */ + if (dramsize2 < (1 << 20)) { + dramsize2 = 0; + } + + /* set SDRAM CS1 size according to the amount of RAM found */ + if (dramsize2 > 0) { + *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + | (0x13 + __builtin_ffs(dramsize2 >> 20) - 1); + } else { + *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */ + } + +#else /* CFG_RAMBOOT */ + + /* retrieve size of memory connected to SDRAM CS0 */ + dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF; + if (dramsize >= 0x13) { + dramsize = (1 << (dramsize - 0x13)) << 20; + } else { + dramsize = 0; + } + + /* retrieve size of memory connected to SDRAM CS1 */ + dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF; + if (dramsize2 >= 0x13) { + dramsize2 = (1 << (dramsize2 - 0x13)) << 20; + } else { + dramsize2 = 0; + } + +#endif /* CFG_RAMBOOT */ + + return dramsize + dramsize2; +} + #elif defined(CONFIG_MGT5100) - *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15); -#endif -#else /* CFG_RAMBOOT */ -#ifdef CONFIG_MGT5100 +long int initdram (int board_type) +{ + ulong dramsize = 0; +#ifndef CFG_RAMBOOT + ulong test1, test2; + + /* setup and enable SDRAM chip selects */ + *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000; + *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */ *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */ + __asm__ volatile ("sync"); + + /* setup config registers */ + *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; + *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; + + /* address select register */ + *(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL; + __asm__ volatile ("sync"); + + /* find RAM size */ + sdram_start(0); + test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000); + sdram_start(1); + test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000); + if (test1 > test2) { + sdram_start(0); + dramsize = test1; + } else { + dramsize = test2; + } + + /* set SDRAM end address according to size */ + *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15); + +#else /* CFG_RAMBOOT */ + + /* Retrieve amount of SDRAM available */ dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15); -#else - dramsize = ((1 << (*(vu_long *)MPC5XXX_SDRAM_CS0CFG - 0x13)) << 20); -#ifdef CONFIG_MPC5200_DDR - dramsize2 = ((1 << (*(vu_long *)MPC5XXX_SDRAM_CS1CFG - 0x13)) << 20); -#endif -#endif + #endif /* CFG_RAMBOOT */ -#ifdef CONFIG_MPC5200_DDR - dramsize += dramsize2; -#endif - /* return total ram size */ return dramsize; } +#else +#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined +#endif + int checkboard (void) { #if defined(CONFIG_MPC5200) diff --git a/board/icecube/mt46v16m16-75.h b/board/icecube/mt46v16m16-75.h new file mode 100644 index 000000000..4c0f9a740 --- /dev/null +++ b/board/icecube/mt46v16m16-75.h @@ -0,0 +1,37 @@ +/* + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define SDRAM_DDR 1 /* is DDR */ + +#if defined(CONFIG_MPC5200) +/* Settings for XLB = 132 MHz */ +#define SDRAM_MODE 0x018D0000 +#define SDRAM_EMODE 0x40090000 +#define SDRAM_CONTROL 0x705f0f00 +#define SDRAM_CONFIG1 0x73722930 +#define SDRAM_CONFIG2 0x47770000 +#define SDRAM_TAPDELAY 0x10000000 + +#else +#error CONFIG_MPC5200 not defined +#endif diff --git a/board/icecube/mt48lc16m16a2-75.h b/board/icecube/mt48lc16m16a2-75.h new file mode 100644 index 000000000..ffdf0396a --- /dev/null +++ b/board/icecube/mt48lc16m16a2-75.h @@ -0,0 +1,43 @@ +/* + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define SDRAM_DDR 0 /* is SDR */ + +#if defined(CONFIG_MPC5200) +/* Settings for XLB = 132 MHz */ +#define SDRAM_MODE 0x00CD0000 +#define SDRAM_CONTROL 0x504F0000 +#define SDRAM_CONFIG1 0xD2322800 +#define SDRAM_CONFIG2 0x8AD70000 + +#elif defined(CONFIG_MGT5100) +/* Settings for XLB = 66 MHz */ +#define SDRAM_MODE 0x008D0000 +#define SDRAM_CONTROL 0x504F0000 +#define SDRAM_CONFIG1 0xC2222600 +#define SDRAM_CONFIG2 0x88B70004 +#define SDRAM_ADDRSEL 0x02000000 + +#else +#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined +#endif -- cgit v1.2.3