From 6aa3d3bfaa986f1aff5e21a9b9f68d087715b1a9 Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Tue, 14 Sep 2010 19:13:50 -0500 Subject: 83xx: Remove warmboot parameter from PCI init functions This change lays the groundwork for the BOOTFLAG_* flags being removed. This change has the small affect of delaying 100ms on PCI initialization after a warm boot as opposed to the optimal 1ms on some boards. Signed-off-by: Peter Tyser included the mpc8308_p1m board. Signed-off-by: Kim Phillips --- arch/powerpc/cpu/mpc83xx/pci.c | 6 +++--- arch/powerpc/cpu/mpc83xx/pcie.c | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/powerpc/cpu/mpc83xx') diff --git a/arch/powerpc/cpu/mpc83xx/pci.c b/arch/powerpc/cpu/mpc83xx/pci.c index a42b230ff..288d99ffc 100644 --- a/arch/powerpc/cpu/mpc83xx/pci.c +++ b/arch/powerpc/cpu/mpc83xx/pci.c @@ -133,7 +133,7 @@ static void pci_init_bus(int bus, struct pci_region *reg) * If fewer than three regions are requested, then the region * list is terminated with a region of size 0. */ -void mpc83xx_pci_init(int num_buses, struct pci_region **reg, int warmboot) +void mpc83xx_pci_init(int num_buses, struct pci_region **reg) { volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR; int i; @@ -150,9 +150,9 @@ void mpc83xx_pci_init(int num_buses, struct pci_region **reg, int warmboot) /* * Release PCI RST Output signal. * Power on to RST high must be at least 100 ms as per PCI spec. - * On warm boots only 1 ms is required. + * On warm boots only 1 ms is required, but we play it safe. */ - udelay(warmboot ? 1000 : 100000); + udelay(100000); for (i = 0; i < num_buses; i++) immr->pci_ctrl[i].gcr = 1; diff --git a/arch/powerpc/cpu/mpc83xx/pcie.c b/arch/powerpc/cpu/mpc83xx/pcie.c index 09912bea3..1771c4823 100644 --- a/arch/powerpc/cpu/mpc83xx/pcie.c +++ b/arch/powerpc/cpu/mpc83xx/pcie.c @@ -308,16 +308,16 @@ static void mpc83xx_pcie_init_bus(int bus, struct pci_region *reg) * The caller must have already set SCCR, SERDES and the PCIE_LAW BARs * must have been set to cover all of the requested regions. */ -void mpc83xx_pcie_init(int num_buses, struct pci_region **reg, int warmboot) +void mpc83xx_pcie_init(int num_buses, struct pci_region **reg) { int i; /* * Release PCI RST Output signal. * Power on to RST high must be at least 100 ms as per PCI spec. - * On warm boots only 1 ms is required. + * On warm boots only 1 ms is required, but we play it safe. */ - udelay(warmboot ? 1000 : 100000); + udelay(100000); if (num_buses > ARRAY_SIZE(mpc83xx_pcie_cfg_space)) { printf("Second PCIE host contoller not configured!\n"); -- cgit v1.2.3