aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-10-15Prepare v2012.10v2012.10Tom Rini
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-12m28: Properly configure the SPI flash chipselectMarek Vasut
The SPI flash is not properly detected by plain "sf probe" due to it being located on different bus and different chipselect. Fix this problem. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@ti.com>
2012-10-08Prepare v2012.10-rc3v2012.10-rc3Tom Rini
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-08arm: armv7: omap3: Fix restore sequence in lowlevel_initAlbert ARIBAUD
The restore sequence in lowlevel_init was in the wrong order, causing lr to lose its original value and be set equal to ip instead. Also, its use of the stack clashes with that of s_init, so move the s_init call after the restore and turn it into a tail-optimized branch. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Tested-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2012-10-08yaffs2: Fix GCC 4.6 compile warningsAnatolij Gustschin
Fix: yaffs_guts.c: In function 'yaffs_check_chunk_erased': yaffs_guts.c:324:6: warning: variable 'result' set but not used [-Wunused-but-set-variable] yaffs_guts.c: In function 'yaffs_verify_chunk_written': yaffs_guts.c:352:6: warning: variable 'result' set but not used [-Wunused-but-set-variable] yaffs_guts.c: In function 'yaffs_grab_chunk_cache': yaffs_guts.c:1488:6: warning: variable 'pushout' set but not used [-Wunused-but-set-variable] yaffs_guts.c: In function 'yaffs_check_obj_details_loaded': yaffs_guts.c:3180:6: warning: variable 'alloc_failed' set but not used [-Wunused-but-set-variable] yaffs_guts.c:3179:6: warning: variable 'result' set but not used [-Wunused-but-set-variable] yaffs_guts.c: In function 'yaffs_update_oh': yaffs_guts.c:3288:6: warning: variable 'result' set but not used [-Wunused-but-set-variable] yaffs_guts.c: In function 'yaffs_get_obj_name': yaffs_guts.c:4447:7: warning: variable 'result' set but not used [-Wunused-but-set-variable] yaffs_summary.c: In function 'yaffs_summary_read': yaffs_summary.c:194:6: warning: variable 'sum_tags_bytes' set but not used [-Wunused-but-set-variable] yaffs_verify.c: In function 'yaffs_verify_file': yaffs_verify.c:227:6: warning: variable 'actual_depth' set but not used [-Wunused-but-set-variable] yaffs_yaffs1.c: In function 'yaffs1_scan': yaffs_yaffs1.c:26:6: warning: variable 'result' set but not used [-Wunused-but-set-variable] yaffs_yaffs2.c: In function 'yaffs2_scan_chunk': yaffs_yaffs2.c:949:6: warning: variable 'result' set but not used [-Wunused-but-set-variable] yaffs_yaffs2.c: In function 'yaffs2_scan_backwards': yaffs_yaffs2.c:1352:6: warning: variable 'deleted' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Charles Manning <cdhmanning@gmail.com> Tested-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2012-10-08disk: part_dos: don't claim whole-disk FAT filesystemsStephen Warren
Logically, a disk that contains a raw FAT filesystem does not in fact have a partition table. However, test_part_dos() was claiming that such disks did in fact have a DOS-style partition table. This caused get_device_and_partition() not to return a whole-disk disk_partition_t, since part_type != PART_TYPE_UNKNOWN. part_dos.c's print_partition_extended() detected the raw FAT filesystem condition and printed a fake partition table that encompassed the whole disk. However, part_dos.c's get_partition_info_extended() did not return any valid partitions in this case. This combination caused get_device_and_partition() not to find any valid partitions, and hence to return an error. Fix test_part_dos() not to claim that raw FAT filesystems are DOS partition tables. In turn, this causes get_device_and_partition() to return a whole-disk disk_partition_t, and hence the following commands work: fatls mmc 0 / fatls mmc 0:auto / An alternative would be to modify print_partition_extended() to detect raw FAT filesystems, just like print_partition_extended() does, and to return a fake partition in this case. However, this seems logically incorrect, and also duplicates code, since get_device_and_partition() falls back to returning a whole-disk partition when there is no partition table on the device. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-08FAT: check for partition 0 not 1 for whole-disk fsStephen Warren
The recent switch to use get_device_and_partition() from do_fat_ls() broke the ability to access a FAT filesystem directly on a whole device; FAT only works within a partition on a device. This change makes e.g. "fatls mmc 0:0" work; explicitly requesting partition ID 0 is something that get_device_and_partition() fully supports. However, fat_register_device() expects partition ID 1 to be used in the full-disk case; partition ID 1 was previously implicitly specified when the user didn't actually specify a partition ID. Update fat_register_device() to expect the correct ID. This change does imply that if a user explicitly executes "fatls mmc 0:1" then this will fail, and may be a change in behaviour. Note that this still prevents "fatls mmc 0:auto" from working. The next patch will fix that. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-08arm: rmobile: bugfix: wrong register saving in lowlevel_initTetsuyuki Kobayashi
lowlevel_init() of rmobile badly assumed that ip register holds return address. The commit "63ee53a7 armv7 cpu_init_crit: Simplify code" breaks this assumption. This patch removes this bad assumption and simplify code. Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
2012-10-08ide: Correct IDE_BUS(dev) macroLuka Perkov
The IDE_BUS(dev) macro was previously doing dev >> 1. This however is a mis-match of the usage in common/cmd_ide.c and would cause boards with multiple ports / devices to not correctly detect all devices. For more details please see: http://lists.denx.de/pipermail/u-boot/2012-April/122525.html [Tom Rini: Reword commit message only] Tested-by: Luka Perkov <uboot@lukaperkov.net> Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Tom Rini <trini@ti.com>
2012-10-08GPIO: pca953x: fix error reportingLaurence Withers
Use the standard CMD_RET_* constants to clearly report errors from the pca953x command. In addition, print error messages when I2C communication fails. Signed-off-by: Laurence Withers <lwithers@guralp.com>
2012-10-08GPIO: pca953x: fix spelling in helpLaurence Withers
Signed-off-by: Laurence Withers <lwithers@guralp.com>
2012-10-08ml507: Fix Xilinx uartlite driver hangRommel Custodio
The default configuration for ml507 will generate a hang() in the Xilinx uartlite driver. userial_ports[] in drivers/serial/serial_xuartlite.c does not get initialized properly. CONFIG_SERIAL_BASE is unused. XILINX_UARTLITE_BASEADDR is used instead. Signed-off-by: Rommel Custodio <sessyargc+uboot@gmail.com>
2012-10-05Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini
2012-10-05arm: armv7: temporarily set -mno-unaligned-accessAlbert ARIBAUD
This patch aims at ensuring that the 2012.10 release works out-of-the-box on as many targets as possible, by reinstating commit 5347560f5427bcdd48a563b62180481606ac8044, which adds option -mno-unaligned-access to armv7 builds. This patch will be overriden immediately after release of 2012.10.
2012-10-05MAINTAINERS: Add Tetsuyuki Kobayshi for kzm9gTetsuyuki Kobayashi
Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
2012-10-05env: fix crash using default -f -aGerlando Falauto
env default -a -f calls env_check_apply on all existing environment variables with a NULL value for "newval" as a way of cleaning up. This causes string manipulation functions to crash on most architectures. So replace a NULL argument with an empty string. Reported-By: Stefano Babic <sbabic@denx.de> Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Tested-by: Stefano Babic <sbabic@denx.de>
2012-10-05Improve license declaration for cmd_ini.hJoe Hershberger
Instead of referenceing the source webpage (which can change) include the license in the source file. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reported-by: Igor Grinberg <grinberg@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Acked-by: Wolfgang Denk <wd@denx.de>
2012-10-05MPC85xx: remove support for TQM85xx boardsWolfgang Denk
Due to grown code sizes the TQM85xx boards don't build any more with some older tool chains (like ELDK 4.2). As these boards have long reached EOL it seems a waste of effort trying to fix them. The vendor has agreed to drop support for them, too. So let's get rid of them. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> cc: Kim Phillips <kim.phillips@freescale.com> Acked-by: Stefan Roese <sr@denx.de>
2012-10-05sh: ap_sh4a_4a: Fixed initialization value of DDR memoryNobuhiro Iwamatsu
The wrong value was set as value of column of DDR memory for ap_sh4a_4a. 10 is the right value. This fixed this problem. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2012-10-04Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini
2012-10-04ARM: Add Altera SOCFPGA Cyclone5Dinh Nguyen
Add minimal support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: Chin Liang See <clsee@altera.com> Signed-off-by: Pavel Machek <pavel@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Tom Trini <trini@ti.com> Cc: Wolfgang Denx <wd@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Stefan Roese <sr@denx.de> ---- v8: Remove no_return attribute for reset_cpu Based on v2012.10-rc2
2012-10-04snowball: Clear UART RX FIFORamesh Chandrasekaran
Without usb-serial cable plugged at this stage, some garbage is seen in UART RX FIFO, which blocks autoboot progress. The fix makes sure to empty the RX FIFO, before we wait for user input to interrupt autoboot. Signed-off-by: Ramesh Chandrasekaran <ramesh.chandrasekaran@stericsson.com>
2012-10-04xilinx: Add new Zynq boardMichal Simek
Add support for Xilinx Zynq board. Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Marek Vasut <marex@denx.de> CC: Joe Hershberger <joe.hershberger@gmail.com>
2012-10-04arm: Support new Xilinx Zynq platformMichal Simek
Add timer driver. Signed-off-by: Michal Simek <monstr@monstr.eu> CC: Joe Hershberger <joe.hershberger@gmail.com> CC: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de>
2012-10-04serial: Add Zynq serial driverMichal Simek
The driver is used on Xilinx Zynq platform. Signed-off-by: Michal Simek <monstr@monstr.eu> CC: Joe Hershberger <joe.hershberger@gmail.com> CC: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de>
2012-10-04arm: Fixed the offset for the no relocation.Zhong Hongbo
When the u-boot address of destination equal to __start, no relocation. relocation offset(r9) = 0. Signed-off-by: Zhong Hongbo <bocui107@gmail.com> Tested-by: Stefano Babic <sbabic@denx.de>
2012-10-04arm: Add CONFIG_OF_BOARD_SETUP support to bootmJoe Hershberger
ARM boards need to change device tree settings as well Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-04arm: Remove additional config flagsMichal Simek
These options are just duplicated from arch/arm/cpu/armv7/config.mk Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-10-04armv7 cpu_init_crit: Simplify codeBenoît Thébaudeau
We don't need to return to cpu_init_crit after calling lowlevel_init, so lowlevel_init can directly return to the caller of cpu_init_crit. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
2012-10-04arm: work around assembler bugAllen Martin
Disable sibling call optimization based on binutils version. This is to work around a bug in the assember in binutils versions < 2.22. Branches to weak symbols can be incorrectly optimized in thumb mode to a short branch (b.n instruction) that won't reach when the symbol gets preempted. http://sourceware.org/bugzilla/show_bug.cgi?id=12532 Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Tom Rini <trini@ti.com>
2012-10-04tools, config.mk: add binutils-versionAllen Martin
Modeled after gcc-version, add function to get binutils version. Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Wolfgang Denk <wd@denx.de>
2012-10-04ARM: increase lmb stack space reservation to 4KBRob Herring
The bootm initrd image copy to ram can collide with the stack in cases where the print buffer size is large (i.e. 1K). The result is intermittent initrd decompression errors depending on the initrd size MOD 4KB since the initrd start address is 4KB aligned. Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-10-04ARM: Add X600 board support (SPEAr600 based)Stefan Roese
This patch adds support for the X600 SPEAr600 based board. Its also the first SPEAr600 board that uses the newly introduced SPEAr600 SPL support. Xloader is not necessary any more. By using the new "u-boot.spr" make target, one image will generated containing both, U-Boot SPL (with mkimage header as needed by the SPEAr BootROM, and the main U-Boot with mkimage header. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Amit Virdi <amit.virdi@st.com> Cc: Vipin Kumar <vipin.kumar@st.com>
2012-10-03ext4: Rename block group descriptor table from gd to bgdSimon Glass
On x86 machines gd is unfortunately a #define, so we should avoid using gd for anything. This patch changes uses of gd to bgd so that ext4fs can be used on x86. A better fix would be to remove the #define in x86, but I'm not sure how to do that. Signed-off-by: Simon Glass <sjg@chromium.org>
2012-10-03Output strings from echo with puts where easyJoe Hershberger
Change echo to puts characters together where it knows about them together. This improves netconsole performance by greatly reducing the number of packets that are sent. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Add a command to access the system timerJoe Hershberger
Two sub-commands... start and get. * start sets the reference. * get prints out the time since the last start (in "<sec>.<msec>" format). If get is called without start, returns time since boot. Simple way to benchmark an operation: "timer start;<commands-to-measure>;timer get" Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Add a new "ini" commandJoe Hershberger
This allows you to read ini-formatted data from anywhere and then import one of the sections into the environment This is based on rev 16 at http://code.google.com/p/inih/ Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Cleanup cache command printsJoe Hershberger
Only print when queried, not every time the setting is changed. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Fix checkpatch.pl complaints in cmd_cache.cJoe Hershberger
Old code that is not compliant. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03net: fix netconsole filteringJoe Hershberger
Adjustment of Michael Walle's fix patch Commit 8a0eccb1056b313b45ab62e3aac400f339aa71b4 breaks netconsole. src_ip must not be converted to host byte order, because nc_ip is already stored in network byte order (see string_to_ip(), called by getenv_IPaddr()). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Add parameter to md5sum to save the md5 sumJoe Hershberger
Add a parameter that allows you to store the md5 sum to either a memory location or a variable. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Implement verify option for md5sum commandJoe Hershberger
Loosely based on CONFIG_CRC32_VERIFY. The sum to verify against can be in memory, in a variable, or the last parameter to the function directly. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Add parameter to sha1sum to save the SHA1 sumJoe Hershberger
Add a parameter that allows you to store the SHA1 sum to either a memory location or a variable. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Implement verify option for sha1sum commandJoe Hershberger
Loosely based on CONFIG_CRC32_VERIFY. The sum to verify against can be in memory, in a variable, or the last parameter to the function directly. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Change dead code in "test" cmd to debug outputJoe Hershberger
Improve debug output for test by indicating the number of parameters and quoting the parameters to make it clear exactly what each contains Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Allow runtime configuration of "zero-delay" checkJoe Hershberger
Define the new "-2" value for bootdelay to mean autoboot with no delay and don't check for an abort key (while "0" value means do check). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Merge remote-tracking branch 'u-boot-marvell/master'Albert ARIBAUD
2012-10-03lsxl: also turn off fan in power down modeMichael Walle
If while booting the power switch is in OFF position, turn off the fan, too. Signed-off-by: Michael Walle <michael@walle.cc> Cc: Prafulla Wadaskar <prafulla@marvell.com>
2012-10-03km_kirkwood: enable MV88E6352_SWITCH support for kmnusaValentin Longchamp
This is required to configure the external 88e6352 switch on nusa. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Holger Brunck <holger.brunck@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> Acked-by: Prafulla Wadaskar <Prafulla@marvell.com>
2012-10-03arm/km: add mv88e6352 configuration for kmnusaValentin Longchamp
The kmnusa board uses a mv88e6352 switch that is connected to the main eth interface of the kirkwood. Therefore the switch must be configured so that the kirkwood's egiga eth inferface can be used. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Cc: Holger Brunck <holger.brunck@keymile.com> Cc: Prafulla Wadaskar <prafulla@marvell.com> Acked-By: Prafulla Wadaskar <prafulla@marvell.com>