aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-08-21Revert "ARM: OMAP4/5: Do not configure non essential pads, clocks, dplls."2012.08.22012.08-2John Rigby
This reverts commit f3f98bb0b8cc520e08ea2bdfc3f9cbe4e4ac29f5. Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-17Revert "armv7: adapt omap3 to the new cache maintenance framework"2012.08.12012.08-1Ricardo Salveti de Araujo
This reverts commit 45bf05854bc94ed8bae9e9114292895b990327ea. Conflicts: arch/arm/cpu/armv7/omap3/board.c arch/arm/cpu/armv7/omap3/lowlevel_init.S arch/arm/include/asm/arch-omap3/sys_proto.h Signed-off-by: Ricardo Salveti de Araujo <ricardo.salveti@linaro.org>
2012-08-16PXE: add dhcp option support for better pxe supportJustin L Werner
"MAGIC" - 208 - An option whose presence and content verifies to the PXELINUX bootloader that the options numbered 209-211 are for the purpose as described herein. "ConfigFile" - 209 - Configures the path/filename component of the configuration file's location, which this bootloader should use to configure itself. "PathPrefix" - 210 - Configures a value to be prepended to the ConfigFile to discern the directory location of the file. "RebootTime" - 211 - Configures a timeout after which the bootstrap program will reboot the system (most likely returning it to PXE). Signed-off-by: Justin L Werner <justin.werner@caononical.com> Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16dhcp: add default weak dhcp_vendorex_{prep,proc} functionsJohn Rigby
Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16dsuboot: fix warningsJohn Rigby
Fix warnings introduced by OMAP4: Panda: Add usb peripheral boot Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16overo: support 200Mhz memory on 37XXSteve Sakoman
Signed-off-by: Steve Sakoman <steve@sakoman.com>
2012-08-16OMAP3 Beagle: add preEnv.txt supportJohn Rigby
Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16OMAP4: add preEnv.txt supportJohn Rigby
Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16SAUCE: HACK: move omap spl base addressJohn Rigby
Move NON_SECURE_SRAM_START from 0x40304000 to 0x40303000 and move u-boot-spl load address from 0x40304350 to 0x40303080. This allows it to stay under 0x4030c000 which is what the TRM says it must do. SRAM actually starts at 0x40300000 on GP devices but was set to 0x40304000 to be the same as Secure devices so this breaks that. Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16OMAP3: Beagle: set mac addr from dieidJohn Rigby
TODO: share dieid<-->mac addr code between OMAP3 and OMAP4 Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16Allow loading of u-boot.bin for backward compatibilityJohn Rigby
Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16OMAP3: Enable command line editing for omap3_beagleJohn Rigby
Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16OMAP4: change MAXARGS to 32John Rigby
Some boot scripts fail without this. This makes OMAP4 the same as omap3_beagle. Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16OMAP4: Enable command line editing in omap4_common.hJohn Rigby
Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16OMAP4: Panda: add uEnv.txt supportJohn Rigby
Identical to omap3_beagle. Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16OMAP3: Beagle: add back boot.scr supportJohn Rigby
Removing boot.scr support broke some external bootscripts that depended on it. This patch restores boot.scr support but leaves uEnv.txt support in. uEnv.txt still works and if both files exist then uEnv.txt takes precedence. Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16OMAP4 Panda: Generate a unique usbethaddrJohn Rigby
The panda board has a usb nic but the nic has no rom. Use the die-id to generate a unique address. This is derived from an RFC kernel patch by Andy Green that does the same thing: https://patchwork.kernel.org/patch/660541/ [RFC PATCH 1/2] OMAP2+: add cpu id register to MAC address helper Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16PXE: look for usbethaddr if no ethaddrJohn Rigby
Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16OMAP4: Force PXE booting when booting via spl-usbRobie Basak
So we don't use boot script on MMC/SD card. Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16OMAP4: Panda: Add USB_SPL variantJohn Rigby
For building a u-boot-spl with support for loading u-boot via usb gadget. Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16OMAP4: Panda: Add usb peripheral bootJohn Rigby
Stripped down fastboot protocol for now but could be just about anything. Will revisit once a fastboot or dfu implementation hits upstream. Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16OMAP4: Make mmc and fat conditional in splJohn Rigby
Size problems when trying to include usb, mmc and fat Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16OMAP4: avoid null pointer access in save_boot_paramsJohn Rigby
When booting via spl the parameter layout is apparently different and this leads to following bad pointers. For now just work around the issue by checking pointers before following them. Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16mx53loco: define ERRATUM_ESDHC111Eric Miao
BugLink: http://bugs.launchpad.net/bugs/738193 Signed-off-by: Eric Miao <eric.miao@linaro.org>
2012-08-16Add a default env that will use boot.scr from the vfat partitionAngus Ainslie
Signed-off-by: Angus Ainslie <angus.ainslie@linaro.org>
2012-08-16ARM: highbank: update autoboot bootdelay valueRob Herring
Now that timers are fixed, set bootdelay to a reasonable value. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-08-16ARM: highbank: add autoboot script filesRob Herring
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-08-16net: allow setting env enetaddr from net device settingRob Herring
If the net driver has setup a valid ethernet address and an ethernet address is not set in the environment already, then set the environment variables from the net driver setting This enables pxe booting on boards which don't set ethaddr env variable. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-08-16ARM: vexpress: Extend default boot sequence to load script from MMCJon Medhurst
Signed-off-by: Jon Medhurst <jon.medhurst@linaro.org>
2012-08-16ARM: vexpress: Change maintainer for ARM Versatile Express platformsRyan Harkin
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
2012-08-16ARM: vexpress: create A5 specific board configRyan Harkin
This patch creates a new config for the A5 dual core tile that includes the generic config for the Versatile Express platform. The generic config has been modified to provide support for the Extended Memory Map, as used on the A5 core tile. A5 does not support the legacy memory map. Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
2012-08-16ARM: vexpress: create A9 specific board configRyan Harkin
This patch creates a new config for the A9 quad core tile that includes the generic config for the Versatile Express platform. Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
2012-08-16ARM: vexpress: move files in preparation for adding a new platformRyan Harkin
The current ca9x4_ct_vxp platform contains support for a Versatile Express motherboard with a quad core A9 core tile. This patch is the first stage of making separating the Versatile Express motherboard code and the A9 specific code, before adding support for the dual core A5 core tile. Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
2012-08-16MX53LOCO: Enable PXE bootJohn Rigby
Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16OMAP3: igep0020: Enable PXE supportJohn Rigby
Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16OMAP3: Beagle: Enable PXE supportJohn Rigby
Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16OMAP3: Beagle: Add standard addresses to envJohn Rigby
Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16SAUCE: OMAP4 Make pxe boot fallback default bootJohn Rigby
If there is no boot.scr nor uEnv.txt nor uImage then fallback to pxe. BugLink: https://bugs.launchpad.net/bugs/820121 BugLink: https://bugs.launchpad.net/bugs/826877 Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16arm: omap4_panda: Enable pxecfg supportJohn Rigby
Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16PXE: OMAP4: add standard env varsJohn Rigby
Set standard env vars in default environment. These are currently only used by PXE which is only enabled on Panda but they are safe on all OMAP4 platforms. Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16snowball: Adding board specific cache cleanup routineMathieu J. Poirier
Following ARM's reference manuel for initializing the cache - the kernel won't boot otherwise. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16armv7: Adding cpu specific cache managmenentMathieu J. Poirier
Some CPU (i.e u8500) need more cache management before launching the Linux kernel. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16u8500: Separating mmc config parameters from driverJohn Rigby
Configuration in vexpress and u8500.v1 is different from what is needed in u8500.v2. As such, card configuration specifics need to reside in the board file rather than the driver. Signed-off-by: John Rigby <john.rigby@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Tom Rini <trini@ti.com>
2012-08-16u8500: Enabling power to MMC device on AB8500 V2Mathieu J. Poirier
Register mapping has changed on power control chip between the first and second revision. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: John Rigby <john.rigby@linaro.org> Signed-off-by: Tom Rini <trini@ti.com>
2012-08-16u8500: Moving processor-specific functions to cpu area.Mathieu J. Poirier
Functions such as providing power to the MMC device and reading the processor version register should be in the cpu area for access by multiple u8500-based boards. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: John Rigby <john.rigby@linaro.org> Signed-off-by: Tom Rini <trini@ti.com>
2012-08-16snowball: applying power to LAN and GBF controllersMathieu J. Poirier
LAN and GBF need to be powered explicitely, doing so with interface to AB8500 companion chip. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16snowball: Moving to ux500.v2 addess scheme for PRCMU accessMathieu J. Poirier
Addresses between ux500.v1 and ux500.v2 have changed slightly, hence mandating a review of the PRCMU access methods. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16snowball: Adding CPU clock initialisationMathieu J. Poirier
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16snowball: Adding architecture dependent initialisationMathieu J. Poirier
Enabling timers and clocks in PRCMU and cleaning up mailbox. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: John Rigby <john.rigby@linaro.org>
2012-08-16u8500: Moving prcmu to cpu directoryMathieu J. Poirier
This is to allow the prcmu functions to be used by multiple u8500-based processors. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: John Rigby <john.rigby@linaro.org>