diff options
Diffstat (limited to 'include/configs/pleb2.h')
| -rw-r--r-- | include/configs/pleb2.h | 140 |
1 files changed, 70 insertions, 70 deletions
diff --git a/include/configs/pleb2.h b/include/configs/pleb2.h index 66e76e8aa..14f8917a9 100644 --- a/include/configs/pleb2.h +++ b/include/configs/pleb2.h @@ -45,8 +45,8 @@ /* * Size of malloc() pool */ -#define CFG_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers @@ -104,33 +104,33 @@ /* * Miscellaneous configurable options */ -#define CFG_HUSH_PARSER 1 -#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_HUSH_PARSER 1 +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CFG_LONGHELP /* undef to save memory */ -#ifdef CFG_HUSH_PARSER -#define CFG_PROMPT "$ " /* Monitor Command Prompt */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#ifdef CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ #else -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #endif -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_DEVICE_NULLDEV 1 +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_DEVICE_NULLDEV 1 -#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ -#define CFG_LOAD_ADDR 0xa2000000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0xa2000000 /* default load address */ -#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ -#define CFG_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */ +#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */ +#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */ /* valid baudrates */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* * Stack sizes @@ -164,86 +164,86 @@ #define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */ #define PHYS_FLASH_SECT_SIZE 0x00010000 /* 64 KB sectors (x2) */ -#define CFG_DRAM_BASE PHYS_SDRAM_1 -#define CFG_DRAM_SIZE PHYS_SDRAM_1_SIZE +#define CONFIG_SYS_DRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_DRAM_SIZE PHYS_SDRAM_1_SIZE -#define CFG_FLASH_BASE PHYS_FLASH_1 -#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* * GPIO settings */ -#define CFG_GPSR0_VAL 0x00000000 /* Don't set anything */ -#define CFG_GPSR1_VAL 0x00000080 -#define CFG_GPSR2_VAL 0x00000000 +#define CONFIG_SYS_GPSR0_VAL 0x00000000 /* Don't set anything */ +#define CONFIG_SYS_GPSR1_VAL 0x00000080 +#define CONFIG_SYS_GPSR2_VAL 0x00000000 -#define CFG_GPCR0_VAL 0x00000000 /* Don't clear anything */ -#define CFG_GPCR1_VAL 0x00000000 -#define CFG_GPCR2_VAL 0x00000000 +#define CONFIG_SYS_GPCR0_VAL 0x00000000 /* Don't clear anything */ +#define CONFIG_SYS_GPCR1_VAL 0x00000000 +#define CONFIG_SYS_GPCR2_VAL 0x00000000 -#define CFG_GPDR0_VAL 0x00000000 -#define CFG_GPDR1_VAL 0x000007C3 -#define CFG_GPDR2_VAL 0x00000000 +#define CONFIG_SYS_GPDR0_VAL 0x00000000 +#define CONFIG_SYS_GPDR1_VAL 0x000007C3 +#define CONFIG_SYS_GPDR2_VAL 0x00000000 /* Edge detect registers (these are set by the kernel) */ -#define CFG_GRER0_VAL 0x00000000 -#define CFG_GRER1_VAL 0x00000000 -#define CFG_GRER2_VAL 0x00000000 -#define CFG_GFER0_VAL 0x00000000 -#define CFG_GFER1_VAL 0x00000000 -#define CFG_GFER2_VAL 0x00000000 - -#define CFG_GAFR0_L_VAL 0x00000000 -#define CFG_GAFR0_U_VAL 0x00000000 -#define CFG_GAFR1_L_VAL 0x00008010 /* Use FF UART Send and Receive */ -#define CFG_GAFR1_U_VAL 0x00000000 -#define CFG_GAFR2_L_VAL 0x00000000 -#define CFG_GAFR2_U_VAL 0x00000000 - -#define CFG_PSSR_VAL 0x20 -#define CFG_CCCR_VAL 0x00000141 /* 100 MHz memory, 200 MHz CPU */ -#define CFG_CKEN_VAL 0x00000060 /* FFUART and STUART enabled */ -#define CFG_ICMR_VAL 0x00000000 /* No interrupts enabled */ +#define CONFIG_SYS_GRER0_VAL 0x00000000 +#define CONFIG_SYS_GRER1_VAL 0x00000000 +#define CONFIG_SYS_GRER2_VAL 0x00000000 +#define CONFIG_SYS_GFER0_VAL 0x00000000 +#define CONFIG_SYS_GFER1_VAL 0x00000000 +#define CONFIG_SYS_GFER2_VAL 0x00000000 + +#define CONFIG_SYS_GAFR0_L_VAL 0x00000000 +#define CONFIG_SYS_GAFR0_U_VAL 0x00000000 +#define CONFIG_SYS_GAFR1_L_VAL 0x00008010 /* Use FF UART Send and Receive */ +#define CONFIG_SYS_GAFR1_U_VAL 0x00000000 +#define CONFIG_SYS_GAFR2_L_VAL 0x00000000 +#define CONFIG_SYS_GAFR2_U_VAL 0x00000000 + +#define CONFIG_SYS_PSSR_VAL 0x20 +#define CONFIG_SYS_CCCR_VAL 0x00000141 /* 100 MHz memory, 200 MHz CPU */ +#define CONFIG_SYS_CKEN_VAL 0x00000060 /* FFUART and STUART enabled */ +#define CONFIG_SYS_ICMR_VAL 0x00000000 /* No interrupts enabled */ /* * Memory settings */ -#define CFG_MSC0_VAL 0x00007FF0 /* Not properly calculated - FIXME (DS) */ -#define CFG_MSC1_VAL 0x00000000 -#define CFG_MSC2_VAL 0x00000000 +#define CONFIG_SYS_MSC0_VAL 0x00007FF0 /* Not properly calculated - FIXME (DS) */ +#define CONFIG_SYS_MSC1_VAL 0x00000000 +#define CONFIG_SYS_MSC2_VAL 0x00000000 -#define CFG_MDCNFG_VAL 0x00000aC9 /* Memory timings for the SDRAM. +#define CONFIG_SYS_MDCNFG_VAL 0x00000aC9 /* Memory timings for the SDRAM. tRP=2, CL=2, tRCD=2, tRAS=5, tRC=8 */ -#define CFG_MDREFR_VAL 0x00403018 /* Initial setting, individual */ +#define CONFIG_SYS_MDREFR_VAL 0x00403018 /* Initial setting, individual */ /* bits set in lowlevel_init.S */ -#define CFG_MDMRS_VAL 0x00000000 +#define CONFIG_SYS_MDMRS_VAL 0x00000000 /* * PCMCIA and CF Interfaces */ -#define CFG_MECR_VAL 0x00000000 /* Hangover from Lubbock. +#define CONFIG_SYS_MECR_VAL 0x00000000 /* Hangover from Lubbock. Needs calculating. (DS/CHC) */ -#define CFG_MCMEM0_VAL 0x00010504 -#define CFG_MCMEM1_VAL 0x00010504 -#define CFG_MCATT0_VAL 0x00010504 -#define CFG_MCATT1_VAL 0x00010504 -#define CFG_MCIO0_VAL 0x00004715 -#define CFG_MCIO1_VAL 0x00004715 +#define CONFIG_SYS_MCMEM0_VAL 0x00010504 +#define CONFIG_SYS_MCMEM1_VAL 0x00010504 +#define CONFIG_SYS_MCATT0_VAL 0x00010504 +#define CONFIG_SYS_MCATT1_VAL 0x00010504 +#define CONFIG_SYS_MCIO0_VAL 0x00004715 +#define CONFIG_SYS_MCIO1_VAL 0x00004715 /* * FLASH and environment organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ /* timeout values are in ticks */ /* FIXME */ -#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */ -#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ +#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */ /* Flash protection */ -#define CFG_FLASH_PROTECTION 1 +#define CONFIG_SYS_FLASH_PROTECTION 1 /* FIXME */ #define CONFIG_ENV_IS_IN_FLASH 1 @@ -252,6 +252,6 @@ #define CONFIG_ENV_SECT_SIZE 0x20000 /* Option added to get around byte ordering issues in the flash driver */ -#define CFG_LITTLE_ENDIAN 1 +#define CONFIG_SYS_LITTLE_ENDIAN 1 #endif /* __CONFIG_H */ |