diff options
Diffstat (limited to 'include/configs/CPC45.h')
| -rw-r--r-- | include/configs/CPC45.h | 404 |
1 files changed, 211 insertions, 193 deletions
diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h index 66f978ebc..5a0013377 100644 --- a/include/configs/CPC45.h +++ b/include/configs/CPC45.h @@ -59,10 +59,13 @@ #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) #define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BEDBUG | \ + CFG_CMD_BEDBUG | \ + CFG_CMD_DATE | \ CFG_CMD_DHCP | \ + CFG_CMD_EEPROM | \ + CFG_CMD_I2C | \ CFG_CMD_PCI | \ - 0 /* CFG_CMD_DATE */ ) + CFG_CMD_SDRAM ) /* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ @@ -77,17 +80,17 @@ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #if 1 -#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ +#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ #endif #ifdef CFG_HUSH_PARSER -#define CFG_PROMPT_HUSH_PS2 "> " +#define CFG_PROMPT_HUSH_PS2 "> " #endif /* Print Buffer Size */ #define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) -#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_LOAD_ADDR 0x00100000 /* Default load address */ @@ -97,29 +100,29 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_BASE 0x00000000 #if defined(CONFIG_BOOT_ROM) -#define CFG_FLASH_BASE 0xFF000000 +#define CFG_FLASH_BASE 0xFF000000 #else -#define CFG_FLASH_BASE 0xFF800000 +#define CFG_FLASH_BASE 0xFF800000 #endif -#define CFG_RESET_ADDRESS 0xFFF00100 +#define CFG_RESET_ADDRESS 0xFFF00100 -#define CFG_EUMB_ADDR 0xFCE00000 +#define CFG_EUMB_ADDR 0xFCE00000 -#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MONITOR_BASE TEXT_BASE -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CFG_MEMTEST_START 0x00004000 /* memtest works on */ -#define CFG_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */ +#define CFG_MEMTEST_START 0x00004000 /* memtest works on */ +#define CFG_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */ - /* Maximum amount of RAM. - */ -#define CFG_MAX_RAM_SIZE 0x10000000 +/* Maximum amount of RAM. + */ +#define CFG_MAX_RAM_SIZE 0x10000000 #if CFG_MONITOR_BASE >= CFG_FLASH_BASE @@ -133,13 +136,13 @@ * Definitions for initial stack pointer and data area */ - /* Size in bytes reserved for initial data - */ -#define CFG_GBL_DATA_SIZE 128 +/* Size in bytes reserved for initial data + */ +#define CFG_GBL_DATA_SIZE 128 -#define CFG_INIT_RAM_ADDR 0x40000000 -#define CFG_INIT_RAM_END 0x1000 -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_RAM_ADDR 0x40000000 +#define CFG_INIT_RAM_END 0x1000 +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) /* * NS16550 Configuration @@ -153,7 +156,30 @@ #define CFG_NS16550_COM1 (CFG_EUMB_ADDR + 0x4500) #define CFG_NS16550_COM2 (CFG_EUMB_ADDR + 0x4600) -#define DUART_DCR (CFG_EUMB_ADDR + 0x4511) +#define DUART_DCR (CFG_EUMB_ADDR + 0x4511) + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ + +#define CFG_I2C_SPEED 100000 /* 100 kHz */ +#define CFG_I2C_SLAVE 0x7F + +/* + * RTC configuration + */ +#define CONFIG_RTC_PCF8563 +#define CFG_I2C_RTC_ADDR 0x51 + +/* + * EEPROM configuration + */ +#define CFG_I2C_EEPROM_ADDR 0x58 +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_BITS 4 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 +#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07 /* * Low Level Configuration Settings @@ -162,62 +188,49 @@ * For the detail description refer to the MPC8240 user's manual. */ -#define CONFIG_SYS_CLK_FREQ 33000000 -#define CFG_HZ 1000 -/* - * SDRAM Configuration Settings - * Please note: currently only 64 and 128 MB SDRAM size supported - * set CFG_SDRAM_SIZE to 64 or 128 - * Memory configuration using SPD information stored on the SODIMMs - * not yet supported. - */ +#define CONFIG_SYS_CLK_FREQ 33000000 +#define CFG_HZ 1000 -#define CFG_SDRAM_SIZE 64 /* SDRAM size -- 64 or 128 MB supported */ - /* Bit-field values for MCCR1. - */ -#define CFG_ROMNAL 0 -#define CFG_ROMFAL 7 +/* Bit-field values for MCCR1. + */ +#define CFG_ROMNAL 0 +#define CFG_ROMFAL 8 + +#define CFG_BANK0_ROW 0 /* SDRAM bank 7-0 row address */ +#define CFG_BANK1_ROW 0 +#define CFG_BANK2_ROW 0 +#define CFG_BANK3_ROW 0 +#define CFG_BANK4_ROW 0 +#define CFG_BANK5_ROW 0 +#define CFG_BANK6_ROW 0 +#define CFG_BANK7_ROW 0 + +/* Bit-field values for MCCR2. + */ -#if (CFG_SDRAM_SIZE == 64) /* 64 MB */ -#define CFG_BANK0_ROW 0 /* SDRAM bank 7-0 row address */ -#elif (CFG_SDRAM_SIZE == 128) /* 128 MB */ -#define CFG_BANK0_ROW 2 /* SDRAM bank 7-0 row address */ -#else -# error "SDRAM size not supported" -#endif -#define CFG_BANK1_ROW 0 -#define CFG_BANK2_ROW 0 -#define CFG_BANK3_ROW 0 -#define CFG_BANK4_ROW 0 -#define CFG_BANK5_ROW 0 -#define CFG_BANK6_ROW 0 -#define CFG_BANK7_ROW 0 - - /* Bit-field values for MCCR2. - */ -#define CFG_REFINT 430 /* Refresh interval */ +#define CFG_REFINT 0x2ec - /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. - */ -#define CFG_BSTOPRE 192 +/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. + */ +#define CFG_BSTOPRE 160 - /* Bit-field values for MCCR3. - */ -#define CFG_REFREC 2 /* Refresh to activate interval */ -#define CFG_RDLAT 3 /* Data latancy from read command */ +/* Bit-field values for MCCR3. + */ +#define CFG_REFREC 2 /* Refresh to activate interval */ +#define CFG_RDLAT 0 /* Data latancy from read command */ - /* Bit-field values for MCCR4. - */ -#define CFG_PRETOACT 2 /* Precharge to activate interval */ -#define CFG_ACTTOPRE 5 /* Activate to Precharge interval */ -#define CFG_SDMODE_CAS_LAT 2 /* SDMODE CAS latancy */ -#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */ -#define CFG_SDMODE_BURSTLEN 2 /* SDMODE Burst length */ -#define CFG_ACTORW 2 +/* Bit-field values for MCCR4. + */ +#define CFG_PRETOACT 2 /* Precharge to activate interval */ +#define CFG_ACTTOPRE 5 /* Activate to Precharge interval */ +#define CFG_SDMODE_CAS_LAT 2 /* SDMODE CAS latancy */ +#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */ +#define CFG_SDMODE_BURSTLEN 2 /* SDMODE Burst length */ +#define CFG_ACTORW 2 #define CFG_REGISTERD_TYPE_BUFFER 1 -#define CFG_EXTROM 1 -#define CFG_REGDIMM 0 +#define CFG_EXTROM 0 +#define CFG_REGDIMM 0 /* Memory bank settings. * Only bits 20-29 are actually used from these vales to set the @@ -226,32 +239,35 @@ * address. Refer to the MPC8240 book. */ -#define CFG_BANK0_START 0x00000000 -#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1) -#define CFG_BANK0_ENABLE 1 -#define CFG_BANK1_START 0x3ff00000 -#define CFG_BANK1_END 0x3fffffff -#define CFG_BANK1_ENABLE 0 -#define CFG_BANK2_START 0x3ff00000 -#define CFG_BANK2_END 0x3fffffff -#define CFG_BANK2_ENABLE 0 -#define CFG_BANK3_START 0x3ff00000 -#define CFG_BANK3_END 0x3fffffff -#define CFG_BANK3_ENABLE 0 -#define CFG_BANK4_START 0x3ff00000 -#define CFG_BANK4_END 0x3fffffff -#define CFG_BANK4_ENABLE 0 -#define CFG_BANK5_START 0x3ff00000 -#define CFG_BANK5_END 0x3fffffff -#define CFG_BANK5_ENABLE 0 -#define CFG_BANK6_START 0x3ff00000 -#define CFG_BANK6_END 0x3fffffff -#define CFG_BANK6_ENABLE 0 -#define CFG_BANK7_START 0x3ff00000 -#define CFG_BANK7_END 0x3fffffff -#define CFG_BANK7_ENABLE 0 - -#define CFG_ODCR 0xff +#define CFG_BANK0_START 0x00000000 +#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1) +#define CFG_BANK0_ENABLE 1 +#define CFG_BANK1_START 0x3ff00000 +#define CFG_BANK1_END 0x3fffffff +#define CFG_BANK1_ENABLE 0 +#define CFG_BANK2_START 0x3ff00000 +#define CFG_BANK2_END 0x3fffffff +#define CFG_BANK2_ENABLE 0 +#define CFG_BANK3_START 0x3ff00000 +#define CFG_BANK3_END 0x3fffffff +#define CFG_BANK3_ENABLE 0 +#define CFG_BANK4_START 0x3ff00000 +#define CFG_BANK4_END 0x3fffffff +#define CFG_BANK4_ENABLE 0 +#define CFG_BANK5_START 0x3ff00000 +#define CFG_BANK5_END 0x3fffffff +#define CFG_BANK5_ENABLE 0 +#define CFG_BANK6_START 0x3ff00000 +#define CFG_BANK6_END 0x3fffffff +#define CFG_BANK6_ENABLE 0 +#define CFG_BANK7_START 0x3ff00000 +#define CFG_BANK7_END 0x3fffffff +#define CFG_BANK7_ENABLE 0 + +#define CFG_ODCR 0xff +#define CFG_PGMAX 0x32 /* how long the 8240 retains the */ + /* currently accessed page in memory */ + /* see 8240 book for details */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) #define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) @@ -279,7 +295,7 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- * FLASH organization @@ -295,7 +311,7 @@ */ #define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x7C0000) +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x7F8000) #define CFG_ENV_SIZE 0x4000 /* Size of the Environment */ #define CFG_ENV_OFFSET 0 /* starting right at the beginning */ #define CFG_ENV_SECT_SIZE 0x8000 /* Size of the Environment Sector */ @@ -317,118 +333,118 @@ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define SRAM_BASE 0x80000000 /* SRAM base address */ -#define SRAM_END 0x801FFFFF +#define SRAM_BASE 0x80000000 /* SRAM base address */ +#define SRAM_END 0x801FFFFF -/*---------------------------------------------------------------------*/ -/* CPC45 Memory Map */ -/*---------------------------------------------------------------------*/ -#define SRAM_BASE 0x80000000 /* SRAM base address */ -#define ST16552_A_BASE 0x80200000 /* ST16552 channel A */ -#define ST16552_B_BASE 0x80400000 /* ST16552 channel A */ -#define BCSR_BASE 0x80600000 /* board control / status registers */ -#define DISPLAY_BASE 0x80600040 /* DISPLAY base */ -#define PCMCIA_MEM_BASE 0x81000000 /* PCMCIA memory window base */ -#define PCMCIA_IO_BASE 0xFE000000 /* PCMCIA IO window base */ +/*----------------------------------------------------------------------*/ +/* CPC45 Memory Map */ +/*----------------------------------------------------------------------*/ +#define SRAM_BASE 0x80000000 /* SRAM base address */ +#define ST16552_A_BASE 0x80200000 /* ST16552 channel A */ +#define ST16552_B_BASE 0x80400000 /* ST16552 channel A */ +#define BCSR_BASE 0x80600000 /* board control / status registers */ +#define DISPLAY_BASE 0x80600040 /* DISPLAY base */ +#define PCMCIA_MEM_BASE 0x81000000 /* PCMCIA memory window base */ +#define PCMCIA_IO_BASE 0xFE000000 /* PCMCIA IO window base */ /*---------------------------------------------------------------------*/ -/* CPC45 Control/Status Registers */ +/* CPC45 Control/Status Registers */ /*---------------------------------------------------------------------*/ -#define IRQ_ENA_1 *((volatile uchar*)(BCSR_BASE + 0x00)) -#define IRQ_STAT_1 *((volatile uchar*)(BCSR_BASE + 0x01)) -#define IRQ_ENA_2 *((volatile uchar*)(BCSR_BASE + 0x02)) -#define IRQ_STAT_2 *((volatile uchar*)(BCSR_BASE + 0x03)) -#define BOARD_CTRL *((volatile uchar*)(BCSR_BASE + 0x04)) -#define BOARD_STAT *((volatile uchar*)(BCSR_BASE + 0x05)) -#define WDG_START *((volatile uchar*)(BCSR_BASE + 0x06)) -#define WDG_PRESTOP *((volatile uchar*)(BCSR_BASE + 0x06)) -#define WDG_STOP *((volatile uchar*)(BCSR_BASE + 0x06)) -#define BOARD_REV *((volatile uchar*)(BCSR_BASE + 0x07)) +#define IRQ_ENA_1 *((volatile uchar*)(BCSR_BASE + 0x00)) +#define IRQ_STAT_1 *((volatile uchar*)(BCSR_BASE + 0x01)) +#define IRQ_ENA_2 *((volatile uchar*)(BCSR_BASE + 0x02)) +#define IRQ_STAT_2 *((volatile uchar*)(BCSR_BASE + 0x03)) +#define BOARD_CTRL *((volatile uchar*)(BCSR_BASE + 0x04)) +#define BOARD_STAT *((volatile uchar*)(BCSR_BASE + 0x05)) +#define WDG_START *((volatile uchar*)(BCSR_BASE + 0x06)) +#define WDG_PRESTOP *((volatile uchar*)(BCSR_BASE + 0x06)) +#define WDG_STOP *((volatile uchar*)(BCSR_BASE + 0x06)) +#define BOARD_REV *((volatile uchar*)(BCSR_BASE + 0x07)) /* IRQ_ENA_1 bit definitions */ -#define I_ENA_1_IERA 0x80 /* INTA enable */ -#define I_ENA_1_IERB 0x40 /* INTB enable */ -#define I_ENA_1_IERC 0x20 /* INTC enable */ -#define I_ENA_1_IERD 0x10 /* INTD enable */ +#define I_ENA_1_IERA 0x80 /* INTA enable */ +#define I_ENA_1_IERB 0x40 /* INTB enable */ +#define I_ENA_1_IERC 0x20 /* INTC enable */ +#define I_ENA_1_IERD 0x10 /* INTD enable */ /* IRQ_STAT_1 bit definitions */ -#define I_STAT_1_INTA 0x80 /* INTA status */ -#define I_STAT_1_INTB 0x40 /* INTB status */ -#define I_STAT_1_INTC 0x20 /* INTC status */ -#define I_STAT_1_INTD 0x10 /* INTD status */ +#define I_STAT_1_INTA 0x80 /* INTA status */ +#define I_STAT_1_INTB 0x40 /* INTB status */ +#define I_STAT_1_INTC 0x20 /* INTC status */ +#define I_STAT_1_INTD 0x10 /* INTD status */ /* IRQ_ENA_2 bit definitions */ -#define I_ENA_2_IEAB 0x80 /* ABORT IRQ enable */ -#define I_ENA_2_IEK1 0x40 /* KEY1 IRQ enable */ -#define I_ENA_2_IEK2 0x20 /* KEY2 IRQ enable */ -#define I_ENA_2_IERT 0x10 /* RTC IRQ enable */ -#define I_ENA_2_IESM 0x08 /* LM81 IRQ enable */ -#define I_ENA_2_IEDG 0x04 /* DEGENERATING IRQ enable */ -#define I_ENA_2_IES2 0x02 /* ST16552/B IRQ enable */ -#define I_ENA_2_IES1 0x01 /* ST16552/A IRQ enable */ +#define I_ENA_2_IEAB 0x80 /* ABORT IRQ enable */ +#define I_ENA_2_IEK1 0x40 /* KEY1 IRQ enable */ +#define I_ENA_2_IEK2 0x20 /* KEY2 IRQ enable */ +#define I_ENA_2_IERT 0x10 /* RTC IRQ enable */ +#define I_ENA_2_IESM 0x08 /* LM81 IRQ enable */ +#define I_ENA_2_IEDG 0x04 /* DEGENERATING IRQ enable */ +#define I_ENA_2_IES2 0x02 /* ST16552/B IRQ enable */ +#define I_ENA_2_IES1 0x01 /* ST16552/A IRQ enable */ /* IRQ_STAT_2 bit definitions */ -#define I_STAT_2_ABO 0x80 /* ABORT IRQ status */ -#define I_STAT_2_KY1 0x40 /* KEY1 IRQ status */ -#define I_STAT_2_KY2 0x20 /* KEY2 IRQ status */ -#define I_STAT_2_RTC 0x10 /* RTC IRQ status */ -#define I_STAT_2_SMN 0x08 /* LM81 IRQ status */ -#define I_STAT_2_DEG 0x04 /* DEGENERATING IRQ status */ -#define I_STAT_2_SIO2 0x02 /* ST16552/B IRQ status */ -#define I_STAT_2_SIO1 0x01 /* ST16552/A IRQ status */ +#define I_STAT_2_ABO 0x80 /* ABORT IRQ status */ +#define I_STAT_2_KY1 0x40 /* KEY1 IRQ status */ +#define I_STAT_2_KY2 0x20 /* KEY2 IRQ status */ +#define I_STAT_2_RTC 0x10 /* RTC IRQ status */ +#define I_STAT_2_SMN 0x08 /* LM81 IRQ status */ +#define I_STAT_2_DEG 0x04 /* DEGENERATING IRQ status */ +#define I_STAT_2_SIO2 0x02 /* ST16552/B IRQ status */ +#define I_STAT_2_SIO1 0x01 /* ST16552/A IRQ status */ /* BOARD_CTRL bit definitions */ -#define USER_LEDS 2 /* 2 user LEDs */ +#define USER_LEDS 2 /* 2 user LEDs */ #if (USER_LEDS == 4) -#define B_CTRL_WRSE 0x80 -#define B_CTRL_KRSE 0x40 -#define B_CTRL_FWRE 0x20 /* Flash write enable */ -#define B_CTRL_FWPT 0x10 /* Flash write protect */ -#define B_CTRL_LED3 0x08 /* LED 3 control */ -#define B_CTRL_LED2 0x04 /* LED 2 control */ -#define B_CTRL_LED1 0x02 /* LED 1 control */ -#define B_CTRL_LED0 0x01 /* LED 0 control */ +#define B_CTRL_WRSE 0x80 +#define B_CTRL_KRSE 0x40 +#define B_CTRL_FWRE 0x20 /* Flash write enable */ +#define B_CTRL_FWPT 0x10 /* Flash write protect */ +#define B_CTRL_LED3 0x08 /* LED 3 control */ +#define B_CTRL_LED2 0x04 /* LED 2 control */ +#define B_CTRL_LED1 0x02 /* LED 1 control */ +#define B_CTRL_LED0 0x01 /* LED 0 control */ #else -#define B_CTRL_WRSE 0x80 -#define B_CTRL_KRSE 0x40 -#define B_CTRL_FWRE_1 0x20 /* Flash write enable */ -#define B_CTRL_FWPT_1 0x10 /* Flash write protect */ -#define B_CTRL_LED1 0x08 /* LED 1 control */ -#define B_CTRL_LED0 0x04 /* LED 0 control */ -#define B_CTRL_FWRE_0 0x02 /* Flash write enable */ -#define B_CTRL_FWPT_0 0x01 /* Flash write protect */ +#define B_CTRL_WRSE 0x80 +#define B_CTRL_KRSE 0x40 +#define B_CTRL_FWRE_1 0x20 /* Flash write enable */ +#define B_CTRL_FWPT_1 0x10 /* Flash write protect */ +#define B_CTRL_LED1 0x08 /* LED 1 control */ +#define B_CTRL_LED0 0x04 /* LED 0 control */ +#define B_CTRL_FWRE_0 0x02 /* Flash write enable */ +#define B_CTRL_FWPT_0 0x01 /* Flash write protect */ #endif /* BOARD_STAT bit definitions */ -#define B_STAT_WDGE 0x80 -#define B_STAT_WDGS 0x40 -#define B_STAT_WRST 0x20 -#define B_STAT_KRST 0x10 -#define B_STAT_CSW3 0x08 /* sitch bit 3 status */ -#define B_STAT_CSW2 0x04 /* sitch bit 2 status */ -#define B_STAT_CSW1 0x02 /* sitch bit 1 status */ -#define B_STAT_CSW0 0x01 /* sitch bit 0 status */ +#define B_STAT_WDGE 0x80 +#define B_STAT_WDGS 0x40 +#define B_STAT_WRST 0x20 +#define B_STAT_KRST 0x10 +#define B_STAT_CSW3 0x08 /* sitch bit 3 status */ +#define B_STAT_CSW2 0x04 /* sitch bit 2 status */ +#define B_STAT_CSW1 0x02 /* sitch bit 1 status */ +#define B_STAT_CSW0 0x01 /* sitch bit 0 status */ /*---------------------------------------------------------------------*/ -/* Display addresses */ +/* Display addresses */ /*---------------------------------------------------------------------*/ -#define DISP_UDC_RAM (DISPLAY_BASE + 0x08) /* UDC RAM */ -#define DISP_CHR_RAM (DISPLAY_BASE + 0x18) /* character Ram */ -#define DISP_FLASH (DISPLAY_BASE + 0x20) /* Flash Ram */ +#define DISP_UDC_RAM (DISPLAY_BASE + 0x08) /* UDC RAM */ +#define DISP_CHR_RAM (DISPLAY_BASE + 0x18) /* character Ram */ +#define DISP_FLASH (DISPLAY_BASE + 0x20) /* Flash Ram */ -#define DISP_UDC_ADR *((volatile uchar*)(DISPLAY_BASE + 0x00)) /* UDC Address Reg. */ -#define DISP_CWORD *((volatile uchar*)(DISPLAY_BASE + 0x10)) /* Control Word Reg. */ +#define DISP_UDC_ADR *((volatile uchar*)(DISPLAY_BASE + 0x00)) /* UDC Address Reg. */ +#define DISP_CWORD *((volatile uchar*)(DISPLAY_BASE + 0x10)) /* Control Word Reg. */ -#define DISP_DIG0 *((volatile uchar*)(DISP_CHR_RAM + 0x00)) /* Digit 0 address */ -#define DISP_DIG1 *((volatile uchar*)(DISP_CHR_RAM + 0x01)) /* Digit 0 address */ -#define DISP_DIG2 *((volatile uchar*)(DISP_CHR_RAM + 0x02)) /* Digit 0 address */ -#define DISP_DIG3 *((volatile uchar*)(DISP_CHR_RAM + 0x03)) /* Digit 0 address */ -#define DISP_DIG4 *((volatile uchar*)(DISP_CHR_RAM + 0x04)) /* Digit 0 address */ -#define DISP_DIG5 *((volatile uchar*)(DISP_CHR_RAM + 0x05)) /* Digit 0 address */ -#define DISP_DIG6 *((volatile uchar*)(DISP_CHR_RAM + 0x06)) /* Digit 0 address */ -#define DISP_DIG7 *((volatile uchar*)(DISP_CHR_RAM + 0x07)) /* Digit 0 address */ +#define DISP_DIG0 *((volatile uchar*)(DISP_CHR_RAM + 0x00)) /* Digit 0 address */ +#define DISP_DIG1 *((volatile uchar*)(DISP_CHR_RAM + 0x01)) /* Digit 0 address */ +#define DISP_DIG2 *((volatile uchar*)(DISP_CHR_RAM + 0x02)) /* Digit 0 address */ +#define DISP_DIG3 *((volatile uchar*)(DISP_CHR_RAM + 0x03)) /* Digit 0 address */ +#define DISP_DIG4 *((volatile uchar*)(DISP_CHR_RAM + 0x04)) /* Digit 0 address */ +#define DISP_DIG5 *((volatile uchar*)(DISP_CHR_RAM + 0x05)) /* Digit 0 address */ +#define DISP_DIG6 *((volatile uchar*)(DISP_CHR_RAM + 0x06)) /* Digit 0 address */ +#define DISP_DIG7 *((volatile uchar*)(DISP_CHR_RAM + 0x07)) /* Digit 0 address */ /*----------------------------------------------------------------------- @@ -436,14 +452,16 @@ *----------------------------------------------------------------------- */ #define CONFIG_PCI /* include pci support */ -#undef CONFIG_PCI_PNP +#undef CONFIG_PCI_PNP +#undef CONFIG_PCI_SCAN_SHOW -#define CONFIG_NET_MULTI /* Multi ethernet cards support */ +#define CONFIG_NET_MULTI /* Multi ethernet cards support */ #define CONFIG_EEPRO100 -#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ +#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ -#define PCI_ENET0_IOADDR 0x00104000 +#define PCI_ENET0_IOADDR 0x82000000 #define PCI_ENET0_MEMADDR 0x82000000 -#define PCI_PLX9030_MEMADDR 0x82100000 +#define PCI_PLX9030_IOADDR 0x82100000 +#define PCI_PLX9030_MEMADDR 0x82100000 #endif /* __CONFIG_H */ |