aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/e1000.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/e1000.c')
-rw-r--r--drivers/net/e1000.c42
1 files changed, 1 insertions, 41 deletions
diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c
index 94b2a41e1..2d4da4b38 100644
--- a/drivers/net/e1000.c
+++ b/drivers/net/e1000.c
@@ -135,7 +135,6 @@ static void e1000_set_media_type(struct e1000_hw *hw);
static int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask);
static int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
-#ifndef CONFIG_AP1000 /* remove for warnings */
static int32_t e1000_read_eeprom(struct e1000_hw *hw, uint16_t offset,
uint16_t words,
uint16_t *data);
@@ -942,7 +941,6 @@ e1000_set_phy_mode(struct e1000_hw *hw)
return E1000_SUCCESS;
}
-#endif /* #ifndef CONFIG_AP1000 */
/***************************************************************************
*
@@ -1123,7 +1121,6 @@ static boolean_t e1000_is_second_port(struct e1000_hw *hw)
static int
e1000_read_mac_addr(struct eth_device *nic)
{
-#ifndef CONFIG_AP1000
struct e1000_hw *hw = nic->priv;
uint16_t offset;
uint16_t eeprom_data;
@@ -1152,31 +1149,6 @@ e1000_read_mac_addr(struct eth_device *nic)
memcpy (nic->enetaddr, fb_mac, NODE_ADDRESS_SIZE);
}
#endif
-#else
- /*
- * The AP1000's e1000 has no eeprom; the MAC address is stored in the
- * environment variables. Currently this does not support the addition
- * of a PMC e1000 card, which is certainly a possibility, so this should
- * be updated to properly use the env variable only for the onboard e1000
- */
-
- int ii;
- char *s, *e;
-
- DEBUGFUNC();
-
- s = getenv ("ethaddr");
- if (s == NULL) {
- return -E1000_ERR_EEPROM;
- } else {
- for(ii = 0; ii < 6; ii++) {
- nic->enetaddr[ii] = s ? simple_strtoul (s, &e, 16) : 0;
- if (s){
- s = (*e) ? e + 1 : e;
- }
- }
- }
-#endif
return 0;
}
@@ -1808,7 +1780,6 @@ e1000_setup_link(struct eth_device *nic)
if (e1000_check_phy_reset_block(hw))
return E1000_SUCCESS;
-#ifndef CONFIG_AP1000
/* Read and store word 0x0F of the EEPROM. This word contains bits
* that determine the hardware's default PAUSE (flow control) mode,
* a bit that determines whether the HW defaults to enabling or
@@ -1822,11 +1793,6 @@ e1000_setup_link(struct eth_device *nic)
DEBUGOUT("EEPROM Read Error\n");
return -E1000_ERR_EEPROM;
}
-#else
- /* we have to hardcode the proper value for our hardware. */
- /* this value is for the 82540EM pci card used for prototyping, and it works. */
- eeprom_data = 0xb220;
-#endif
if (hw->fc == e1000_fc_default) {
switch (hw->mac_type) {
@@ -1836,16 +1802,12 @@ e1000_setup_link(struct eth_device *nic)
hw->fc = e1000_fc_full;
break;
default:
-#ifndef CONFIG_AP1000
ret_val = e1000_read_eeprom(hw,
EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
if (ret_val) {
DEBUGOUT("EEPROM Read Error\n");
return -E1000_ERR_EEPROM;
}
-#else
- eeprom_data = 0xb220;
-#endif
if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0)
hw->fc = e1000_fc_none;
else if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) ==
@@ -2109,12 +2071,10 @@ e1000_copper_link_preconfig(struct e1000_hw *hw)
}
DEBUGOUT("Phy ID = %x \n", hw->phy_id);
-#ifndef CONFIG_AP1000
/* Set PHY to class A mode (if necessary) */
ret_val = e1000_set_phy_mode(hw);
if (ret_val)
return ret_val;
-#endif
if ((hw->mac_type == e1000_82545_rev_3) ||
(hw->mac_type == e1000_82546_rev_3)) {
ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL,
@@ -5242,7 +5202,7 @@ e1000_initialize(bd_t * bis)
list_add_tail(&hw->list_node, &e1000_hw_list);
/* Validate the EEPROM and get chipset information */
-#if !(defined(CONFIG_AP1000) || defined(CONFIG_MVBC_1G))
+#if !defined(CONFIG_MVBC_1G)
if (e1000_init_eeprom_params(hw)) {
E1000_ERR(nic, "EEPROM is invalid!\n");
continue;