diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/README.arm-relocation | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/doc/README.arm-relocation b/doc/README.arm-relocation index 3856633e9..dc7be7e42 100644 --- a/doc/README.arm-relocation +++ b/doc/README.arm-relocation @@ -93,7 +93,7 @@ Relocation with NAND_SPL (example for the tx25): and start with code execution on this address. - The First page contains u-boot code from u-boot:nand_spl/nand_boot_fsl_nfc.c - which inits the dram, cpu registers, reloacte itself to CONFIG_SYS_TEXT_BASE and loads + which inits the dram, cpu registers, reloacte itself to CONFIG_SYS_TEXT_BASE and loads the "real" u-boot to CONFIG_SYS_NAND_U_BOOT_DST and starts execution @CONFIG_SYS_NAND_U_BOOT_START @@ -162,7 +162,7 @@ e) load new symbol table: (gdb) add-symbol-file u-boot 0x8ff08000 add symbol table from file "u-boot" at - .text_addr = 0x8ff08000 + .text_addr = 0x8ff08000 (y or n) y Reading symbols from /home/hs/celf/u-boot/u-boot...done. (gdb) c @@ -170,12 +170,12 @@ Continuing. ^C Program received signal SIGSTOP, Stopped (signal). 0x8ff17f18 in serial_getc () at serial_mxc.c:192 -192 while (__REG(UART_PHYS + UTS) & UTS_RXEMPTY); +192 while (__REG(UART_PHYS + UTS) & UTS_RXEMPTY); (gdb) add-symbol-file u-boot 0x8ff08000 - ^^^^^^^^^^ - get this address from u-boot debug printfs + ^^^^^^^^^^ + get this address from u-boot debug printfs U-Boot 2010.06-rc2-00009-gf77b8b8-dirty (Jun 22 2010 - 09:43:46) @@ -187,7 +187,7 @@ Top of RAM usable for U-Boot at: 90000000 LCD panel info: 640 x 480, 16 bit/pix Reserving 600k for LCD Framebuffer at: 8ff6a000 Reserving 391k for U-Boot at: 8ff08000 - ^^^^^^^^ + ^^^^^^^^ Reserving 1280k for malloc() at: 8fdc8000 Reserving 24 Bytes for Board Info at: 8fdc7fe8 Reserving 52 Bytes for Global Data at: 8fdc7fb4 @@ -197,6 +197,6 @@ Bank #0: 80000000 256 MiB relocation Offset is: eff08000 mon: 00058BAC gd->monLen: 00061F10 Now running in RAM - U-Boot at: 8ff08000 - ^^^^^^^^ + ^^^^^^^^ Now you can use gdb as usual :-) |