diff options
Diffstat (limited to 'board/v37/v37.c')
| -rw-r--r-- | board/v37/v37.c | 218 |
1 files changed, 218 insertions, 0 deletions
diff --git a/board/v37/v37.c b/board/v37/v37.c new file mode 100644 index 000000000..764aff791 --- /dev/null +++ b/board/v37/v37.c @@ -0,0 +1,218 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Yoo. Jonghoon, IPone, yooth@ipone.co.kr + * PPCboot port on RPXlite board + * + * DRAM related UPMA register values are modified. + * See RPXLite engineering note : 50MHz/60ns - UPM RAM WORDS + */ + +#include <common.h> +#include "mpc8xx.h" + +/* ------------------------------------------------------------------------- */ + +static long int dram_size (void); + +/* ------------------------------------------------------------------------- */ + +#define MBYTE (1024*1024) +#define DRAM_DELAY 0x00000379 /* DRAM delay count */ +#define _NOT_USED_ 0xFFFFCC25 + +const uint sdram_table[] = +{ + /* single read. (offset 0 in upm RAM) */ + 0x1F07D004, 0xEEAEE004, 0x11ADD004, 0xEFBBA000, + 0x1FF75447, 0x1FF77C34, 0xEFEABC34, 0x1FB57C35, + + /* burst read. (Offset 8 in upm RAM) */ + 0x1F07D004, 0xEEAEE004, 0x00ADC004, 0x00AFC000, + 0x00AFC000, 0x01AFC000, 0x0FBB8000, 0x1FF75447, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + + /* single write. (Offset 0x18 in upm RAM) */ + 0x1F27D004, 0xEEAEA000, 0x01B90004, 0x1FF75447, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + + /* burst write. (Offset 0x20 in upm RAM) */ + 0x1F07D004, 0xEEAEA000, 0x00AD4000, 0x00AFC000, + 0x00AFC000, 0x01BB8004, 0x1FF75447, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + + /* Refresh cycle, offset 0x30 */ + 0x1FF5DC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, + 0xFFFFFC84, 0xFFFFFC07, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + + /* Exception, 0ffset 0x3C */ + 0x7FFFFC07, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, +}; +/* ------------------------------------------------------------------------- */ + + +/* + * Check Board Identity: + * + * Return 1 for now. + * + */ + +int checkboard (void) +{ + printf("Marel V37\n") ; + return (0) ; +} + +/* ------------------------------------------------------------------------- */ + +long int initdram (int board_type) +{ + volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + unsigned long temp; + volatile int delay_cnt; + long int ramsize; + + ramsize = dram_size(); + + /* Refresh clock prescalar */ + memctl->memc_mptpr = 0x400 ; + + if( ramsize == 32*MBYTE ) + temp = 0xd0904110; + else /* 16MB */ + temp = 0xd0802110; + + memctl->memc_mbmr = temp; + + upmconfig(UPMB, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint)); + + /* Map controller banks 2 to the SDRAM bank */ + memctl->memc_or2 = 0xA00 | (0 - ramsize); + memctl->memc_br2 = 0xC1; + + memctl->memc_mbmr = temp | 0x08; + memctl->memc_mcr = 0x80804130; + + delay_cnt = 0; + while( delay_cnt++ < DRAM_DELAY ) + ; + + /* Run MRS command in location 5-8 of UPMB */ + + memctl->memc_mbmr = temp | 0x04; + memctl->memc_mar = 0x88; + + memctl->memc_mcr = 0x80804105; + + delay_cnt = 0; + while( delay_cnt++ < DRAM_DELAY ) + ; + +#ifdef CONFIG_CAN_DRIVER + /* Initialize OR3 / BR3 */ + memctl->memc_or3 = CFG_OR3_CAN; + memctl->memc_br3 = CFG_BR3_CAN; + + /* Initialize MBMR */ + memctl->memc_mamr = MAMR_GPL_B4DIS; /* GPL_B4 ouput line Disable */ + + /* Initialize UPMB for CAN: single read */ + memctl->memc_mdr = 0xFFFFC004; + memctl->memc_mcr = 0x0100 | UPMA; + + memctl->memc_mdr = 0x0FFFD004; + memctl->memc_mcr = 0x0101 | UPMA; + + memctl->memc_mdr = 0x0FFFC000; + memctl->memc_mcr = 0x0102 | UPMA; + + memctl->memc_mdr = 0x3FFFC004; + memctl->memc_mcr = 0x0103 | UPMA; + + memctl->memc_mdr = 0xFFFFDC05; + memctl->memc_mcr = 0x0104 | UPMA; + + /* Initialize UPMB for CAN: single write */ + memctl->memc_mdr = 0xFFFCC004; + memctl->memc_mcr = 0x0118 | UPMA; + + memctl->memc_mdr = 0xCFFCD004; + memctl->memc_mcr = 0x0119 | UPMA; + + memctl->memc_mdr = 0x0FFCC000; + memctl->memc_mcr = 0x011A | UPMA; + + memctl->memc_mdr = 0x7FFCC004; + memctl->memc_mcr = 0x011B | UPMA; + + memctl->memc_mdr = 0xFFFDCC05; + memctl->memc_mcr = 0x011C | UPMA; +#endif /* CONFIG_CAN_DRIVER */ + + return (dram_size()); +} + +/* ------------------------------------------------------------------------- */ + +/* + * Find size of RAM from configuration pins. + * The input pins that contain the memory size are also the debug port + * pins. Normally they are configured as debug port pins. To be able + * to read the memory configuration, we must deactivate the debug port + * and enable the pcmcia input pins. Then return the register to + * previous state. + */ + +static long int dram_size () +{ + volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile sysconf8xx_t *siu = &immap->im_siu_conf; + volatile pcmconf8xx_t *pcm = &immap->im_pcmcia; + long int i, memory=1; + unsigned long siu_mcr; + + siu_mcr = siu->sc_siumcr; + siu->sc_siumcr = siu_mcr & 0xFF9FFFFF; + for(i=0; i<10; i++) i = i; + + memory = (pcm->pcmc_pipr>>12) & 0x3; + + siu->sc_siumcr = siu_mcr; + + switch( memory ) + { + case 1: + return( 32*MBYTE ); + case 2: + return( 64*MBYTE ); + default: + break; + } + return( 16*MBYTE ); +} |