diff options
Diffstat (limited to 'board/sixnet/sixnet.c')
| -rw-r--r-- | board/sixnet/sixnet.c | 11 |
1 files changed, 5 insertions, 6 deletions
diff --git a/board/sixnet/sixnet.c b/board/sixnet/sixnet.c index ec1cb8b00..e33925c6f 100644 --- a/board/sixnet/sixnet.c +++ b/board/sixnet/sixnet.c @@ -174,7 +174,7 @@ int board_postclk_init (void) /* write program data to FPGA at the programming address * so extra /CS1 strobes at end of configuration don't actually - * write to any registers. + * write to any registers. */ fpga = 0xff; /* first write is ignored */ fpga = 0xff; /* fill byte */ @@ -378,7 +378,7 @@ static long ram_size(ulong *base, long maxsize) ramsize = 0; /* no RAM present, or defective */ else { *base_addr = 0xaaaa5555; - *(base_addr + 1) = 0x5555aaaa; /* use write to modify data bus */ + *(base_addr + 1) = 0x5555aaaa; /* use write to modify data bus */ if (*base_addr != 0xaaaa5555) ramsize = 0; /* no RAM present, or defective */ } @@ -422,7 +422,7 @@ const uint sdram_table[] = _not_used_, _not_used_, _not_used_, _not_used_, /* single write. (offset 18 in upm RAM) */ - /* FADS had 0x1f27fc04, ... + /* FADS had 0x1f27fc04, ... * but most other boards have 0x1f07fc04, which * sets GPL0 from A11MPC to 0 1/4 clock earlier, * like the single read. @@ -518,7 +518,7 @@ long int initdram(int board_type) * This may be too fast, but works for any memory. * It is adjusted to 4096 cycles in 64 milliseconds if * possible once we know what memory we have. - * + * * We have to be careful changing UPM registers after we * ask it to run these commands. * @@ -532,7 +532,7 @@ long int initdram(int board_type) * SCCR[DFBRG] 0 * PTP divide by 8 * 1 chip select - */ + */ memctl->memc_mptpr = MPTPR_PTP_DIV8; /* 0x0800 */ memctl->memc_mamr = SDRAM_MAMR_8COL & (~MAMR_PTAE); /* no refresh yet */ @@ -602,4 +602,3 @@ long int initdram(int board_type) return (size_sdram); } - |