diff options
Diffstat (limited to 'board/cpc45/cpc45.c')
| -rw-r--r-- | board/cpc45/cpc45.c | 152 |
1 files changed, 121 insertions, 31 deletions
diff --git a/board/cpc45/cpc45.c b/board/cpc45/cpc45.c index ad6924582..92ccd42e7 100644 --- a/board/cpc45/cpc45.c +++ b/board/cpc45/cpc45.c @@ -25,6 +25,7 @@ #include <mpc824x.h> #include <asm/processor.h> #include <pci.h> +#include <i2c.h> int sysControlDisplay(int digit, uchar ascii_code); extern void Plx9030Init(void); @@ -58,46 +59,134 @@ int checkboard(void) return 0; } -long int initdram(int board_type) +long int initdram (int board_type) { - long size; - long new_bank0_end; - long mear1; - long emear1; - - size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE); - - new_bank0_end = size - 1; - mear1 = mpc824x_mpc107_getreg(MEAR1); - emear1 = mpc824x_mpc107_getreg(EMEAR1); - mear1 = (mear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); - emear1 = (emear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); - mpc824x_mpc107_setreg(MEAR1, mear1); - mpc824x_mpc107_setreg(EMEAR1, emear1); - - return (size); + int m, row, col, bank, i, ref; + unsigned long start, end; + uint32_t mccr1, mccr2; + uint32_t mear1 = 0, emear1 = 0, msar1 = 0, emsar1 = 0; + uint32_t mear2 = 0, emear2 = 0, msar2 = 0, emsar2 = 0; + uint8_t mber = 0; + unsigned int tmp; + + i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE); + + if (i2c_reg_read (0x50, 2) != 0x04) + return 0; /* Memory type */ + + m = i2c_reg_read (0x50, 5); /* # of physical banks */ + row = i2c_reg_read (0x50, 3); /* # of rows */ + col = i2c_reg_read (0x50, 4); /* # of columns */ + bank = i2c_reg_read (0x50, 17); /* # of logical banks */ + ref = i2c_reg_read (0x50, 12); /* refresh rate / type */ + + CONFIG_READ_WORD(MCCR1, mccr1); + mccr1 &= 0xffff0000; + + CONFIG_READ_WORD(MCCR2, mccr2); + mccr2 &= 0xffff0000; + + start = CFG_SDRAM_BASE; + end = start + (1 << (col + row + 3) ) * bank - 1; + + for (i = 0; i < m; i++) { + mccr1 |= ((row == 13)? 2 : (bank == 4)? 0 : 3) << i * 2; + if (i < 4) { + msar1 |= ((start >> 20) & 0xff) << i * 8; + emsar1 |= ((start >> 28) & 0xff) << i * 8; + mear1 |= ((end >> 20) & 0xff) << i * 8; + emear1 |= ((end >> 28) & 0xff) << i * 8; + } else { + msar2 |= ((start >> 20) & 0xff) << (i-4) * 8; + emsar2 |= ((start >> 28) & 0xff) << (i-4) * 8; + mear2 |= ((end >> 20) & 0xff) << (i-4) * 8; + emear2 |= ((end >> 28) & 0xff) << (i-4) * 8; + } + mber |= 1 << i; + start += (1 << (col + row + 3) ) * bank; + end += (1 << (col + row + 3) ) * bank; + } + for (; i < 8; i++) { + if (i < 4) { + msar1 |= 0xff << i * 8; + emsar1 |= 0x30 << i * 8; + mear1 |= 0xff << i * 8; + emear1 |= 0x30 << i * 8; + } else { + msar2 |= 0xff << (i-4) * 8; + emsar2 |= 0x30 << (i-4) * 8; + mear2 |= 0xff << (i-4) * 8; + emear2 |= 0x30 << (i-4) * 8; + } + } + + switch(ref) { + case 0x00: + case 0x80: + tmp = get_bus_freq(0) / 1000000 * 15625 / 1000 - 22; + break; + case 0x01: + case 0x81: + tmp = get_bus_freq(0) / 1000000 * 3900 / 1000 - 22; + break; + case 0x02: + case 0x82: + tmp = get_bus_freq(0) / 1000000 * 7800 / 1000 - 22; + break; + case 0x03: + case 0x83: + tmp = get_bus_freq(0) / 1000000 * 31300 / 1000 - 22; + break; + case 0x04: + case 0x84: + tmp = get_bus_freq(0) / 1000000 * 62500 / 1000 - 22; + break; + case 0x05: + case 0x85: + tmp = get_bus_freq(0) / 1000000 * 125000 / 1000 - 22; + break; + default: + tmp = 0x512; + break; + } + + CONFIG_WRITE_WORD(MCCR1, mccr1); + CONFIG_WRITE_WORD(MCCR2, tmp << MCCR2_REFINT_SHIFT); + CONFIG_WRITE_WORD(MSAR1, msar1); + CONFIG_WRITE_WORD(EMSAR1, emsar1); + CONFIG_WRITE_WORD(MEAR1, mear1); + CONFIG_WRITE_WORD(EMEAR1, emear1); + CONFIG_WRITE_WORD(MSAR2, msar2); + CONFIG_WRITE_WORD(EMSAR2, emsar2); + CONFIG_WRITE_WORD(MEAR2, mear2); + CONFIG_WRITE_WORD(EMEAR2, emear2); + CONFIG_WRITE_BYTE(MBER, mber); + + return (1 << (col + row + 3) ) * bank * m; } + /* * Initialize PCI Devices, report devices found. */ -#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_sandpoint_config_table[] = { - { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID, +static struct pci_config_table pci_cpc45_config_table[] = { +#ifndef CONFIG_PCI_PNP + { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0F, PCI_ANY_ID, pci_cfgfunc_config_device, { PCI_ENET0_IOADDR, PCI_ENET0_MEMADDR, PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }}, + { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0D, PCI_ANY_ID, + pci_cfgfunc_config_device, { PCI_PLX9030_IOADDR, + PCI_PLX9030_MEMADDR, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }}, +#endif /*CONFIG_PCI_PNP*/ { } }; -#endif - struct pci_controller hose = { #ifndef CONFIG_PCI_PNP - config_table: pci_sandpoint_config_table, + config_table: pci_cpc45_config_table, #endif }; @@ -108,6 +197,9 @@ void pci_init_board(void) /* init PCI_to_LOCAL Bus BRIDGE */ Plx9030Init(); + /* Clear Display */ + DISP_CWORD = 0x0; + sysControlDisplay(0,' '); sysControlDisplay(1,'C'); sysControlDisplay(2,'P'); @@ -130,16 +222,14 @@ void pci_init_board(void) * RETURNS: NA */ -int sysControlDisplay - ( - int digit, /* number of digit 0..7 */ - uchar ascii_code /* ASCII code */ - ) +int sysControlDisplay (int digit, /* number of digit 0..7 */ + uchar ascii_code /* ASCII code */ + ) { if ((digit < 0) || (digit > 7)) return (-1); - *((volatile uchar*)(DISP_CHR_RAM + digit)) = ascii_code; + *((volatile uchar *) (DISP_CHR_RAM + digit)) = ascii_code; return (0); } |