diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/cpu/armv7/am33xx/board.c | 32 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-am33xx/common_def.h | 26 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-am33xx/sys_proto.h | 28 |
3 files changed, 33 insertions, 53 deletions
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index 0f16021c2..2ca4ca77a 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -25,7 +25,7 @@ #include <asm/arch/clock.h> #include <asm/arch/gpio.h> #include <asm/arch/mmc_host_def.h> -#include <asm/arch/common_def.h> +#include <asm/arch/sys_proto.h> #include <asm/io.h> #include <asm/omap_common.h> #include <asm/emif.h> @@ -58,29 +58,16 @@ const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx; static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; -#define NO_OF_MAC_ADDR 3 -#define ETH_ALEN 6 -#define NAME_LEN 8 - -struct am335x_baseboard_id { - unsigned int magic; - char name[NAME_LEN]; - char version[4]; - char serial[12]; - char config[32]; - char mac_addr[NO_OF_MAC_ADDR][ETH_ALEN]; -}; - static struct am335x_baseboard_id __attribute__((section (".data"))) header; static inline int board_is_bone(void) { - return !strncmp(header.name, "A335BONE", NAME_LEN); + return !strncmp(header.name, "A335BONE", HDR_NAME_LEN); } static inline int board_is_evm_sk(void) { - return !strncmp("A335X_SK", header.name, NAME_LEN); + return !strncmp("A335X_SK", header.name, HDR_NAME_LEN); } /* @@ -207,21 +194,18 @@ void s_init(void) if (read_eeprom() < 0) puts("Could not get board ID.\n"); + enable_board_pin_mux(&header); if (board_is_evm_sk()) { /* * EVM SK 1.2A and later use gpio0_7 to enable DDR3. * This is safe enough to do on older revs. */ - enable_gpio0_7_pin_mux(); gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en"); gpio_direction_output(GPIO_DDR_VTT_EN, 1); } config_ddr(board_memory_type()); #endif - - /* Enable MMC0 */ - enable_mmc0_pin_mux(); } #if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD) @@ -238,14 +222,10 @@ void setup_clocks_for_console(void) } /* - * Basic board specific setup + * Basic board specific setup. Pinmux has been handled already. */ int board_init(void) { - enable_uart0_pin_mux(); - - enable_i2c0_pin_mux(); - enable_i2c1_pin_mux(); i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); if (read_eeprom() < 0) puts("Could not get board ID.\n"); @@ -318,12 +298,10 @@ int board_eth_init(bd_t *bis) } if (board_is_bone()) { - enable_mii1_pin_mux(); writel(MII_MODE_ENABLE, &cdev->miisel); cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_MII; } else { - enable_rgmii1_pin_mux(); writel(RGMII_MODE_ENABLE, &cdev->miisel); cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_RGMII; diff --git a/arch/arm/include/asm/arch-am33xx/common_def.h b/arch/arm/include/asm/arch-am33xx/common_def.h deleted file mode 100644 index 1fe6258c0..000000000 --- a/arch/arm/include/asm/arch-am33xx/common_def.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * common_def.h - * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __COMMON_DEF_H__ -#define __COMMON_DEF_H__ - -extern void enable_uart0_pin_mux(void); -extern void enable_mmc0_pin_mux(void); -extern void enable_gpio0_7_pin_mux(void); -extern void enable_i2c0_pin_mux(void); -extern void enable_mii1_pin_mux(void); -extern void enable_rgmii1_pin_mux(void); - -#endif/*__COMMON_DEF_H__ */ diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h index eef55732a..8a4b24839 100644 --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h @@ -19,6 +19,24 @@ #ifndef _SYS_PROTO_H_ #define _SYS_PROTO_H_ +/* + * AM335x parts define a system EEPROM that defines certain sub-fields. + * We use these fields to in turn see what board we are on, and what + * that might require us to set or not set. + */ +#define HDR_NO_OF_MAC_ADDR 3 +#define HDR_ETH_ALEN 6 +#define HDR_NAME_LEN 8 + +struct am335x_baseboard_id { + unsigned int magic; + char name[HDR_NAME_LEN]; + char version[4]; + char serial[12]; + char config[32]; + char mac_addr[HDR_NO_OF_MAC_ADDR][HDR_ETH_ALEN]; +}; + #define BOARD_REV_ID 0x0 u32 get_cpu_rev(void); @@ -31,4 +49,14 @@ int print_cpuinfo(void); u32 get_device_type(void); void setup_clocks_for_console(void); void ddr_pll_config(unsigned int ddrpll_M); + +/* + * We have three pin mux functions that must exist. We must be able to enable + * uart0, for initial output and i2c0 to read the main EEPROM. We then have a + * main pinmux function that can be overridden to enable all other pinmux that + * is required on the board. + */ +void enable_uart0_pin_mux(void); +void enable_i2c0_pin_mux(void); +void enable_board_pin_mux(struct am335x_baseboard_id *header); #endif |