aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/powerpc/cpu/mpc85xx/ddr-gen3.c80
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/main.c12
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/util.c4
-rw-r--r--arch/powerpc/include/asm/fsl_ddr_sdram.h2
4 files changed, 71 insertions, 27 deletions
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
index 088cf4564..8bed5fe92 100644
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
+++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
@@ -18,12 +18,13 @@
void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
unsigned int ctrl_num)
{
- unsigned int i;
+ unsigned int i, bus_width;
volatile ccsr_ddr_t *ddr;
u32 temp_sdram_cfg;
+ u32 total_gb_size_per_controller;
+ int timeout, timeout_save;
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
volatile ccsr_local_ecm_t *ecm = (void *)CONFIG_SYS_MPC85xx_ECM_ADDR;
- u32 total_gb_size_per_controller;
unsigned int csn_bnds_backup = 0, cs_sa, cs_ea, *csn_bnds_t;
int csn = -1;
#endif
@@ -52,8 +53,8 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
return;
}
- out_be32(&ddr->eor, regs->ddr_eor);
-
+ if (regs->ddr_eor)
+ out_be32(&ddr->eor, regs->ddr_eor);
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
debug("Workaround for ERRATUM_DDR111_DDR134\n");
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
@@ -275,9 +276,46 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
asm volatile("sync;isync");
+ total_gb_size_per_controller = 0;
+ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+ if (!(regs->cs[i].config & 0x80000000))
+ continue;
+ total_gb_size_per_controller += 1 << (
+ ((regs->cs[i].config >> 14) & 0x3) + 2 +
+ ((regs->cs[i].config >> 8) & 0x7) + 12 +
+ ((regs->cs[i].config >> 0) & 0x7) + 8 +
+ 3 - ((regs->ddr_sdram_cfg >> 19) & 0x3) -
+ 26); /* minus 26 (count of 64M) */
+ }
+ if (fsl_ddr_get_intl3r() & 0x80000000) /* 3-way interleaving */
+ total_gb_size_per_controller *= 3;
+ else if (regs->cs[0].config & 0x20000000) /* 2-way interleaving */
+ total_gb_size_per_controller <<= 1;
+ /*
+ * total memory / bus width = transactions needed
+ * transactions needed / data rate = seconds
+ * to add plenty of buffer, double the time
+ * For example, 2GB on 666MT/s 64-bit bus takes about 402ms
+ * Let's wait for 800ms
+ */
+ bus_width = 3 - ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK)
+ >> SDRAM_CFG_DBW_SHIFT);
+ timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 /
+ (get_ddr_freq(0) >> 20)) << 1;
+ timeout_save = timeout;
+ total_gb_size_per_controller >>= 4; /* shift down to gb size */
+ debug("total %d GB\n", total_gb_size_per_controller);
+ debug("Need to wait up to %d * 10ms\n", timeout);
+
/* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */
- while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT)
+ while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) &&
+ (timeout >= 0)) {
udelay(10000); /* throttle polling rate */
+ timeout--;
+ }
+
+ if (timeout <= 0)
+ printf("Waiting for D_INIT timeout. Memory may not work.\n");
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
/* continue this workaround */
@@ -335,23 +373,9 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
while (in_be32(&ddr->debug[1]) & 0x400)
udelay(10000); /* throttle polling rate */
- /* 7. Wait for 400ms/GB */
- total_gb_size_per_controller = 0;
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- if (i == csn) {
- total_gb_size_per_controller +=
- ((csn_bnds_backup & 0xFFFF) >> 6)
- - (csn_bnds_backup >> 22) + 1;
- } else {
- total_gb_size_per_controller +=
- ((regs->cs[i].bnds & 0xFFFF) >> 6)
- - (regs->cs[i].bnds >> 22) + 1;
- }
- }
- if (in_be32(&ddr->sdram_cfg) & 0x80000)
- total_gb_size_per_controller <<= 1;
- debug("Wait for %d ms\n", total_gb_size_per_controller * 400);
- udelay(total_gb_size_per_controller * 400000);
+ /* 7. Wait for state machine 2nd run, roughly 400ms/GB */
+ debug("Wait for %d * 10ms\n", timeout_save);
+ udelay(timeout_save * 10000);
/* 8. Set sdram_cfg_2[dinit] if options requires */
setbits_be32(&ddr->sdram_cfg_2,
@@ -359,8 +383,16 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2));
/* 9. Poll until dinit is cleared */
- while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT)
- udelay(10000);
+ timeout = timeout_save;
+ debug("Need to wait up to %d * 10ms\n", timeout);
+ while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) &&
+ (timeout >= 0)) {
+ udelay(10000); /* throttle polling rate */
+ timeout--;
+ }
+
+ if (timeout <= 0)
+ printf("Waiting for D_INIT timeout. Memory may not work.\n");
/* 10. Clear EEBACR[3] */
clrbits_be32(&ecm->eebacr, 10000000);
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
index b47268c20..2885906e8 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
@@ -526,6 +526,17 @@ phys_size_t fsl_ddr_sdram(void)
#endif
total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 0);
+ /* setup 3-way interleaving before enabling DDRC */
+ switch (info.memctl_opts[0].memctl_interleaving_mode) {
+ case FSL_DDR_3WAY_1KB_INTERLEAVING:
+ case FSL_DDR_3WAY_4KB_INTERLEAVING:
+ case FSL_DDR_3WAY_8KB_INTERLEAVING:
+ fsl_ddr_set_intl3r(info.memctl_opts[0].memctl_interleaving_mode);
+ break;
+ default:
+ break;
+ }
+
/* Program configuration registers. */
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
debug("Programming controller %u\n", i);
@@ -561,7 +572,6 @@ phys_size_t fsl_ddr_sdram(void)
case FSL_DDR_3WAY_8KB_INTERLEAVING:
law_memctl = LAW_TRGT_IF_DDR_INTLV_123;
if (i == 0) {
- fsl_ddr_set_intl3r(info.memctl_opts[i].memctl_interleaving_mode);
fsl_ddr_set_lawbar(&info.common_timing_params[i],
law_memctl, i);
}
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/util.c b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
index b439cc975..afc5fae49 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/util.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
@@ -142,13 +142,13 @@ void board_add_ram_info(int use_default)
#if CONFIG_NUM_DDR_CONTROLLERS >= 2
if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
- ddr = (void *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
+ ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
sdram_cfg = in_be32(&ddr->sdram_cfg);
}
#endif
#if CONFIG_NUM_DDR_CONTROLLERS >= 3
if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
- ddr = (void *)CONFIG_SYS_MPC85xx_DDR3_ADDR;
+ ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR3_ADDR;
sdram_cfg = in_be32(&ddr->sdram_cfg);
}
#endif
diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h
index bb79335b1..640d3297d 100644
--- a/arch/powerpc/include/asm/fsl_ddr_sdram.h
+++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h
@@ -98,6 +98,7 @@ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t;
#define SDRAM_CFG_SDRAM_TYPE_SHIFT 24
#define SDRAM_CFG_DYN_PWR 0x00200000
#define SDRAM_CFG_DBW_MASK 0x00180000
+#define SDRAM_CFG_DBW_SHIFT 19
#define SDRAM_CFG_32_BE 0x00080000
#define SDRAM_CFG_16_BE 0x00100000
#define SDRAM_CFG_8_BE 0x00040000
@@ -330,6 +331,7 @@ extern phys_size_t fsl_ddr_sdram_size(void);
extern int fsl_use_spd(void);
extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
unsigned int ctrl_num);
+u32 fsl_ddr_get_intl3r(void);
/*
* The 85xx boards have a common prototype for fixed_sdram so put the
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-12 14:42:40 +0000