diff options
| -rw-r--r-- | board/icecube/icecube.c | 21 | ||||
| -rw-r--r-- | cpu/mpc5xxx/cpu.c | 10 | ||||
| -rw-r--r-- | include/configs/IceCube.h | 8 | ||||
| -rw-r--r-- | include/mpc5xxx.h | 1 |
4 files changed, 32 insertions, 8 deletions
diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c index 44831c625..4197a7c52 100644 --- a/board/icecube/icecube.c +++ b/board/icecube/icecube.c @@ -27,6 +27,7 @@ #include <common.h> #include <mpc5xxx.h> #include <pci.h> +#include <asm/processor.h> #if defined(CONFIG_LITE5200B) #include "mt46v32m16.h" @@ -89,6 +90,8 @@ long int initdram (int board_type) { ulong dramsize = 0; ulong dramsize2 = 0; + uint svr, pvr; + #ifndef CFG_RAMBOOT ulong test1, test2; @@ -183,6 +186,24 @@ long int initdram (int board_type) #endif /* CFG_RAMBOOT */ + /* + * On MPC5200B we need to set the special configuration delay in the + * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM + * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190: + * + * "The SDelay should be written to a value of 0x00000004. It is + * required to account for changes caused by normal wafer processing + * parameters." + */ + svr = get_svr(); + pvr = get_pvr(); + if ((SVR_MJREV(svr) >= 2) && + (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) { + + *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04; + __asm__ volatile ("sync"); + } + return dramsize + dramsize2; } diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c index 2d695d12e..8d1e7c637 100644 --- a/cpu/mpc5xxx/cpu.c +++ b/cpu/mpc5xxx/cpu.c @@ -38,7 +38,7 @@ int checkcpu (void) ulong clock = gd->cpu_clk; char buf[32]; #ifndef CONFIG_MGT5100 - uint svr; + uint svr, pvr; #endif puts ("CPU: "); @@ -47,7 +47,8 @@ int checkcpu (void) puts (CPU_ID_STR); printf (" (JTAG ID %08lx)", *(vu_long *)MPC5XXX_CDM_JTAGID); #else - svr = get_svr (); + svr = get_svr(); + pvr = get_pvr(); switch (SVR_VER (svr)) { case SVR_MPC5200: printf ("MPC5200"); @@ -57,11 +58,10 @@ int checkcpu (void) break; } - printf (" v%d.%d", SVR_MJREV (svr), SVR_MNREV (svr)); + printf (" v%d.%d, Core v%d.%d", SVR_MJREV (svr), SVR_MNREV (svr), + PVR_MAJ(pvr), PVR_MIN(pvr)); #endif - printf (" at %s MHz\n", strmhz (buf, clock)); - return 0; } diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index 596e52ce3..1152f838d 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -56,7 +56,9 @@ * 0x40000000 - 0x4fffffff - PCI Memory * 0x50000000 - 0x50ffffff - PCI IO Space */ -#define CONFIG_PCI 1 +#define CONFIG_PCI + +#if defined(CONFIG_PCI) #define CONFIG_PCI_PNP 1 #define CONFIG_PCI_SCAN_SHOW 1 @@ -67,6 +69,8 @@ #define CONFIG_PCI_IO_BUS 0x50000000 #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS #define CONFIG_PCI_IO_SIZE 0x01000000 +#define ADD_PCI_CMD CFG_CMD_PCI +#endif #define CFG_XLB_PIPELINING 1 @@ -76,8 +80,6 @@ #define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 -#define ADD_PCI_CMD CFG_CMD_PCI - #else /* MPC5100 */ #define CONFIG_MII 1 diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h index f33d85855..50a6ac1e9 100644 --- a/include/mpc5xxx.h +++ b/include/mpc5xxx.h @@ -131,6 +131,7 @@ #if defined(CONFIG_MGT5100) #define MPC5XXX_SDRAM_XLBSEL (MPC5XXX_SDRAM + 0x0010) #endif +#define MPC5XXX_SDRAM_SDELAY (MPC5XXX_SDRAM + 0x0090) /* Clock Distribution Module */ #define MPC5XXX_CDM_JTAGID (MPC5XXX_CDM + 0x0000) |