diff options
| -rw-r--r-- | arch/arm/cpu/armv7/tegra20/usb.c | 15 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-tegra20/usb.h | 4 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-tegra.c | 5 |
3 files changed, 8 insertions, 16 deletions
diff --git a/arch/arm/cpu/armv7/tegra20/usb.c b/arch/arm/cpu/armv7/tegra20/usb.c index cac0918ff..eda8e6f14 100644 --- a/arch/arm/cpu/armv7/tegra20/usb.c +++ b/arch/arm/cpu/armv7/tegra20/usb.c @@ -77,7 +77,6 @@ struct fdt_usb { static struct fdt_usb port[USB_PORTS_MAX]; /* List of valid USB ports */ static unsigned port_count; /* Number of available ports */ -static int port_current; /* Current port (-1 = none) */ /* * This table has USB timing parameters for each Oscillator frequency we @@ -351,30 +350,25 @@ static int add_port(struct fdt_usb *config, const u32 timing[]) return 0; } -int tegrausb_start_port(unsigned portnum, u32 *hccr, u32 *hcor) +int tegrausb_start_port(int portnum, u32 *hccr, u32 *hcor) { struct usb_ctlr *usbctlr; if (portnum >= port_count) return -1; - tegrausb_stop_port(); set_host_mode(&port[portnum]); usbctlr = port[portnum].reg; *hccr = (u32)&usbctlr->cap_length; *hcor = (u32)&usbctlr->usb_cmd; - port_current = portnum; return 0; } -int tegrausb_stop_port(void) +int tegrausb_stop_port(int portnum) { struct usb_ctlr *usbctlr; - if (port_current == -1) - return -1; - - usbctlr = port[port_current].reg; + usbctlr = port[portnum].reg; /* Stop controller */ writel(0, &usbctlr->usb_cmd); @@ -383,7 +377,7 @@ int tegrausb_stop_port(void) /* Initiate controller reset */ writel(2, &usbctlr->usb_cmd); udelay(1000); - port_current = -1; + return 0; } @@ -459,7 +453,6 @@ int board_usb_init(const void *blob) return -1; set_host_mode(&config); } - port_current = -1; return 0; } diff --git a/arch/arm/include/asm/arch-tegra20/usb.h b/arch/arm/include/asm/arch-tegra20/usb.h index 638033be5..4bbd4aa5a 100644 --- a/arch/arm/include/asm/arch-tegra20/usb.h +++ b/arch/arm/include/asm/arch-tegra20/usb.h @@ -240,13 +240,13 @@ int board_usb_init(const void *blob); * @param hcor returns start address of EHCI HCOR registers * @return 0 if ok, -1 on error (generally invalid port number) */ -int tegrausb_start_port(unsigned portnum, u32 *hccr, u32 *hcor); +int tegrausb_start_port(int portnum, u32 *hccr, u32 *hcor); /** * Stop the current port * * @return 0 if ok, -1 if no port was active */ -int tegrausb_stop_port(void); +int tegrausb_stop_port(int portnum); #endif /* _TEGRA_USB_H_ */ diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index bb5a68ef1..a1c43f833 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -57,7 +57,7 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) * Select the first port, as we don't have a way of selecting others * yet */ - if (tegrausb_start_port(0, &our_hccr, &our_hcor)) + if (tegrausb_start_port(index, &our_hccr, &our_hcor)) return -1; *hccr = (struct ehci_hccr *)our_hccr; @@ -72,6 +72,5 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) */ int ehci_hcd_stop(int index) { - tegrausb_stop_port(); - return 0; + return tegrausb_stop_port(index); } |