diff options
| -rw-r--r-- | board/freescale/p1010rdb/README | 3 | ||||
| -rw-r--r-- | doc/README.mpc85xx | 54 |
2 files changed, 27 insertions, 30 deletions
diff --git a/board/freescale/p1010rdb/README b/board/freescale/p1010rdb/README index 022c023ae..7f18aaa1b 100644 --- a/board/freescale/p1010rdb/README +++ b/board/freescale/p1010rdb/README @@ -146,7 +146,6 @@ Build and burn u-boot to NAND flash 3. Check SW4[1:4]= 1000 and SW6[4]=1, then power on. - Build and burn u-boot to SPI flash ================================== 1. Build u-boot-spi.bin image @@ -166,7 +165,6 @@ Build and burn u-boot to SPI flash 3. Check SW4[1:4]= 0110 and SW6[4]=0, then power on. - CPLD POR setting registers ========================== 1. Set POR switch selection register (addr 0xFFB00011) to 0. @@ -197,7 +195,6 @@ Switch from NAND to NOR boot with Core/CCB/DDR (800/400/667 MHz): => reset - Boot Linux from network using TFTP on P1010RDB ============================================== Place uImage, p1010rdb.dtb and rootfs files in the TFTP disk area. diff --git a/doc/README.mpc85xx b/doc/README.mpc85xx index 2753b45b0..5a4b591a8 100644 --- a/doc/README.mpc85xx +++ b/doc/README.mpc85xx @@ -26,15 +26,15 @@ Major Config Switches during various boot Modes ---------------------------------------------- NOR boot - !defined(CONFIG_SYS_RAMBOOT) + !defined(CONFIG_SYS_RAMBOOT) NOR boot Secure - !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT) + !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT) RAMBOOT(SD, SPI & NAND boot) - defined(CONFIG_SYS_RAMBOOT) + defined(CONFIG_SYS_RAMBOOT) RAMBOOT Secure (SD, SPI & NAND) - defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT) + defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT) NAND SPL BOOT - defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_NAND_SPL) + defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_NAND_SPL) TLB Entries during u-boot execution @@ -45,44 +45,44 @@ Note: Sequence number is in order of execution A) defined(CONFIG_SYS_RAMBOOT) i.e. SD, SPI, NAND RAMBOOT & NAND_SPL boot 1) TLB entry to overcome e500 v1/v2 debug restriction - Location : Label "_start_e500" + Location : Label "_start_e500" TLB Entry : CONFIG_SYS_PPC_E500_DEBUG_TLB EPN -->RPN : CONFIG_SYS_MONITOR_BASE --> CONFIG_SYS_MONITOR_BASE Properties : 256K, AS0, I, IPROT 2) TLB entry for working in AS1 - Location : Label "create_init_ram_area" + Location : Label "create_init_ram_area" TLB Entry : 15 EPN -->RPN : CONFIG_SYS_MONITOR_BASE --> CONFIG_SYS_MONITOR_BASE Properties : 1M, AS1, I, G, IPROT 3) TLB entry for the stack during AS1 - Location : Lable "create_init_ram_area" + Location : Lable "create_init_ram_area" TLB Entry : 14 EPN -->RPN : CONFIG_SYS_INIT_RAM_ADDR --> CONFIG_SYS_INIT_RAM_ADDR Properties : 16K, AS1, IPROT 4) TLB entry for CCSRBAR during AS1 execution - Location : cpu_init_early_f + Location : cpu_init_early_f TLB Entry : 13 EPN -->RPN : CONFIG_SYS_CCSRBAR --> CONFIG_SYS_CCSRBAR Properties : 1M, AS1, I, G 5) Invalidate unproctected TLB Entries - Location : cpu_init_early_f + Location : cpu_init_early_f Invalidated: 13 6) Create TLB entries as per boards/freescale/<board>/tlb.c - Location : cpu_init_early_f --> init_tlbs() + Location : cpu_init_early_f --> init_tlbs() Properties : ..., AS0, ... Please note It can overwrites previous TLB Entries. 7) Disable TLB Entries of AS1 - Location : cpu_init_f --> disable_tlb() - Disable : 15, 14 + Location : cpu_init_f --> disable_tlb() + Disable : 15, 14 8) Update Flash's TLB entry - Location : Board_init_r + Location : Board_init_r TLB entry : Search from TLB entries EPN -->RPN : CONFIG_SYS_FLASH_BASE --> CONFIG_SYS_FLASH_BASE_PHYS Properties : Board specific size, AS0, I, G, IPROT @@ -91,7 +91,7 @@ A) defined(CONFIG_SYS_RAMBOOT) i.e. SD, SPI, NAND RAMBOOT & NAND_SPL boot B) !defined(CONFIG_SYS_RAMBOOT) i.e. NOR boot 1) TLB entry to overcome e500 v1/v2 debug restriction - Location : Label "_start_e500" + Location : Label "_start_e500" TLB Entry : CONFIG_SYS_PPC_E500_DEBUG_TLB #if defined(CONFIG_SECURE_BOOT) EPN -->RPN : CONFIG_SYS_MONITOR_BASE --> CONFIG_SYS_PBI_FLASH_WINDOW @@ -102,7 +102,7 @@ B) !defined(CONFIG_SYS_RAMBOOT) i.e. NOR boot #endif 2) TLB entry for working in AS1 - Location : Label "create_init_ram_area" + Location : Label "create_init_ram_area" TLB Entry : 15 #if defined(CONFIG_SECURE_BOOT) EPN -->RPN : CONFIG_SYS_MONITOR_BASE --> CONFIG_SYS_PBI_FLASH_WINDOW @@ -113,54 +113,54 @@ B) !defined(CONFIG_SYS_RAMBOOT) i.e. NOR boot #endif 3) TLB entry for the stack during AS1 - Location : Lable "create_init_ram_area" + Location : Lable "create_init_ram_area" TLB Entry : 14 EPN -->RPN : CONFIG_SYS_INIT_RAM_ADDR --> CONFIG_SYS_INIT_RAM_ADDR Properties : 16K, AS1, IPROT 4) TLB entry for CCSRBAR during AS1 execution - Location : cpu_init_early_f + Location : cpu_init_early_f TLB Entry : 13 EPN -->RPN : CONFIG_SYS_CCSRBAR --> CONFIG_SYS_CCSRBAR Properties : 1M, AS1, I, G 5) TLB entry for Errata workaround CONFIG_SYS_FSL_ERRATUM_IFC_A003399 - Location : cpu_init_early_f + Location : cpu_init_early_f TLB Entry : 9 EPN -->RPN : SRAM_BASE_ADDR --> SRAM_BASE_ADDR Properties : 1M, AS1, I 6) CONFIG_SYS_FSL_ERRATUM_IFC_A003399 Adjust flash's phys addr - Location : cpu_init_early_f --> setup_ifc + Location : cpu_init_early_f --> setup_ifc TLB Entry : Get Flash TLB EPN -->RPN : Adjusted flash_phys --> Adjusted flash_phys Properties : 4M, AS1, I, G, IPROT 7) CONFIG_SYS_FSL_ERRATUM_IFC_A003399: E500 v1,v2 debug restriction - Location : cpu_init_early_f --> setup_ifc + Location : cpu_init_early_f --> setup_ifc TLB Entry : CONFIG_SYS_PPC_E500_DEBUG_TLB EPN -->RPN : Adjusted flash_phys --> Adjusted flash_phys Properties : 4M, AS0, I, G, IPROT 8) Invalidate unproctected TLB Entries - Location : cpu_init_early_f + Location : cpu_init_early_f Invalidated: 13, 9 9) Create TLB entries as per boards/freescale/<board>/tlb.c - Location : cpu_init_early_f --> init_tlbs() + Location : cpu_init_early_f --> init_tlbs() Properties : ..., AS0, ... Note: It can overwrites previous TLB Entries 10) Disable TLB Entries of AS1 - Location : cpu_init_f --> disable_tlb() - Disable : 15, 14 + Location : cpu_init_f --> disable_tlb() + Disable : 15, 14 11) Create DDR's TLB entriy - Location : Board_init_f -> init_func_ram -> initdram + Location : Board_init_f -> init_func_ram -> initdram TLB entry : Search free TLB entry 12) Update Flash's TLB entry - Location : Board_init_r + Location : Board_init_r TLB entry : Search from TLB entries EPN -->RPN : CONFIG_SYS_FLASH_BASE --> CONFIG_SYS_FLASH_BASE_PHYS Properties : Board specific size, AS0, I, G, IPROT |