aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/cpu/armv7/u8500/prcmu.c91
-rw-r--r--arch/arm/include/asm/arch-u8500/hardware.h2
-rw-r--r--arch/arm/include/asm/arch-u8500/prcmu.h10
3 files changed, 71 insertions, 32 deletions
diff --git a/arch/arm/cpu/armv7/u8500/prcmu.c b/arch/arm/cpu/armv7/u8500/prcmu.c
index 4918bbc1c..934428fb8 100644
--- a/arch/arm/cpu/armv7/u8500/prcmu.c
+++ b/arch/arm/cpu/armv7/u8500/prcmu.c
@@ -36,9 +36,10 @@
#include <asm/arch/prcmu.h>
/* CPU mailbox registers */
-#define PRCM_MBOX_CPU_VAL (U8500_PRCMU_BASE + 0x0fc)
-#define PRCM_MBOX_CPU_SET (U8500_PRCMU_BASE + 0x100)
-#define PRCM_MBOX_CPU_CLR (U8500_PRCMU_BASE + 0x104)
+#define PRCMU_I2C_WRITE(slave) \
+ (((slave) << 1) | I2CWRITE | (1 << 6))
+#define PRCMU_I2C_READ(slave) \
+ (((slave) << 1) | I2CREAD | (1 << 6))
#define I2C_MBOX_BIT (1 << 5)
@@ -50,26 +51,39 @@ static int prcmu_is_ready(void)
return ready;
}
-static int _wait_for_req_complete(int num)
+static int wait_for_i2c_mbx_rdy(void)
{
- int timeout = 1000;
+ int timeout = 10000;
- /* checking any already on-going transaction */
- while ((readl(PRCM_MBOX_CPU_VAL) & (1 << num)) && timeout)
+ if (readl(PRCM_ARM_IT1_VAL) & I2C_MBOX_BIT) {
+ printf("prcmu: warning i2c mailbox was not acked\n");
+ /* clear mailbox 5 ack irq */
+ writel(I2C_MBOX_BIT, PRCM_ARM_IT1_CLEAR);
+ }
+
+ /* check any already on-going transaction */
+ while ((readl(PRCM_MBOX_CPU_VAL) & I2C_MBOX_BIT) && timeout)
timeout--;
- timeout = 1000;
+ if (timeout == 0)
+ return -1;
+
+ return 0;
+}
+
+static int wait_for_i2c_req_done(void)
+{
+ int timeout = 10000;
/* Set an interrupt to XP70 */
- writel(1 << num, PRCM_MBOX_CPU_SET);
+ writel(I2C_MBOX_BIT, PRCM_MBOX_CPU_SET);
- while ((readl(PRCM_MBOX_CPU_VAL) & (1 << num)) && timeout)
+ /* wait for mailbox 5 (i2c) ack */
+ while (!(readl(PRCM_ARM_IT1_VAL) & I2C_MBOX_BIT) && timeout)
timeout--;
- if (!timeout) {
- printf("PRCMU operation timed out\n");
+ if (timeout == 0)
return -1;
- }
return 0;
}
@@ -84,6 +98,7 @@ int prcmu_i2c_read(u8 reg, u16 slave)
{
uint8_t i2c_status;
uint8_t i2c_val;
+ int ret;
if (!prcmu_is_ready())
return -1;
@@ -91,13 +106,23 @@ int prcmu_i2c_read(u8 reg, u16 slave)
debug("\nprcmu_4500_i2c_read:bank=%x;reg=%x;\n",
reg, slave);
+ ret = wait_for_i2c_mbx_rdy();
+ if (ret) {
+ printf("prcmu_i2c_read: mailbox became not ready\n");
+ return ret;
+ }
+
/* prepare the data for mailbox 5 */
- writeb((reg << 1) | I2CREAD, PRCM_REQ_MB5_I2COPTYPE_REG);
+ writeb(PRCMU_I2C_READ(reg), PRCM_REQ_MB5_I2COPTYPE_REG);
writeb((1 << 3) | 0x0, PRCM_REQ_MB5_BIT_FIELDS);
writeb(slave, PRCM_REQ_MB5_I2CSLAVE);
writeb(0, PRCM_REQ_MB5_I2CVAL);
- _wait_for_req_complete(REQ_MB5);
+ ret = wait_for_i2c_req_done();
+ if (ret) {
+ printf("prcmu_i2c_read: mailbox request timed out\n");
+ return ret;
+ }
/* retrieve values */
debug("ack-mb5:transfer status = %x\n",
@@ -109,16 +134,14 @@ int prcmu_i2c_read(u8 reg, u16 slave)
i2c_status = readb(PRCM_ACK_MB5_STATUS);
i2c_val = readb(PRCM_ACK_MB5_VAL);
+ /* clear mailbox 5 ack irq */
+ writel(I2C_MBOX_BIT, PRCM_ARM_IT1_CLEAR);
if (i2c_status == I2C_RD_OK)
return i2c_val;
- else {
-
- printf("prcmu_i2c_read:read return status= %d\n",
- i2c_status);
- return -1;
- }
+ printf("prcmu_i2c_read:read return status= %d\n", i2c_status);
+ return -1;
}
/**
@@ -131,6 +154,7 @@ int prcmu_i2c_read(u8 reg, u16 slave)
int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data)
{
uint8_t i2c_status;
+ int ret;
if (!prcmu_is_ready())
return -1;
@@ -138,14 +162,23 @@ int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data)
debug("\nprcmu_4500_i2c_write:bank=%x;reg=%x;\n",
reg, slave);
+ ret = wait_for_i2c_mbx_rdy();
+ if (ret) {
+ printf("prcmu_i2c_write: mailbox became not ready\n");
+ return ret;
+ }
+
/* prepare the data for mailbox 5 */
- writeb((reg << 1) | I2CWRITE, PRCM_REQ_MB5_I2COPTYPE_REG);
+ writeb(PRCMU_I2C_WRITE(reg), PRCM_REQ_MB5_I2COPTYPE_REG);
writeb((1 << 3) | 0x0, PRCM_REQ_MB5_BIT_FIELDS);
writeb(slave, PRCM_REQ_MB5_I2CSLAVE);
writeb(reg_data, PRCM_REQ_MB5_I2CVAL);
- debug("\ncpu_is_u8500v11\n");
- _wait_for_req_complete(REQ_MB5);
+ ret = wait_for_i2c_req_done();
+ if (ret) {
+ printf("prcmu_i2c_write: mailbox request timed out\n");
+ return ret;
+ }
/* retrieve values */
debug("ack-mb5:transfer status = %x\n",
@@ -157,12 +190,14 @@ int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data)
i2c_status = readb(PRCM_ACK_MB5_STATUS);
debug("\ni2c_status = %x\n", i2c_status);
+ /* clear mailbox 5 ack irq */
+ writel(I2C_MBOX_BIT, PRCM_ARM_IT1_CLEAR);
+
if (i2c_status == I2C_WR_OK)
return 0;
- else {
- printf("ape-i2c: i2c_status : 0x%x\n", i2c_status);
- return -1;
- }
+
+ printf("%s: i2c_status : 0x%x\n", __func__, i2c_status);
+ return -1;
}
void u8500_prcmu_enable(u32 *reg)
diff --git a/arch/arm/include/asm/arch-u8500/hardware.h b/arch/arm/include/asm/arch-u8500/hardware.h
index 6bb95ec07..920888052 100644
--- a/arch/arm/include/asm/arch-u8500/hardware.h
+++ b/arch/arm/include/asm/arch-u8500/hardware.h
@@ -62,7 +62,7 @@
/* Per4 */
#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000)
-#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x0f000)
+#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x06800)
/* Per3 */
#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000)
diff --git a/arch/arm/include/asm/arch-u8500/prcmu.h b/arch/arm/include/asm/arch-u8500/prcmu.h
index 1fd4d2a56..9862eb3dd 100644
--- a/arch/arm/include/asm/arch-u8500/prcmu.h
+++ b/arch/arm/include/asm/arch-u8500/prcmu.h
@@ -28,6 +28,7 @@
#define I2CWRITE 0
#define PRCMU_BASE U8500_PRCMU_BASE
+#define PRCMU_BASE_TCDM U8500_PRCMU_TCDM_BASE
#define PRCM_UARTCLK_MGT_REG (PRCMU_BASE + 0x018)
#define PRCM_MSPCLK_MGT_REG (PRCMU_BASE + 0x01C)
#define PRCM_I2CCLK_MGT_REG (PRCMU_BASE + 0x020)
@@ -38,12 +39,15 @@
#define PRCM_PER5CLK_MGT_REG (PRCMU_BASE + 0x038)
#define PRCM_PER6CLK_MGT_REG (PRCMU_BASE + 0x03C)
#define PRCM_PER7CLK_MGT_REG (PRCMU_BASE + 0x040)
+#define PRCM_MBOX_CPU_VAL (PRCMU_BASE + 0x0FC)
+#define PRCM_MBOX_CPU_SET (PRCMU_BASE + 0x100)
#define PRCM_ARM_IT1_CLEAR (PRCMU_BASE + 0x48C)
+#define PRCM_ARM_IT1_VAL (PRCMU_BASE + 0x494)
#define PRCM_TCR (PRCMU_BASE + 0x1C8)
-#define PRCM_REQ_MB5 (PRCMU_BASE + 0xE44)
-#define PRCM_ACK_MB5 (PRCMU_BASE + 0xDF4)
-#define PRCM_XP70_CUR_PWR_STATE (PRCMU_BASE + 0xFFC)
+#define PRCM_REQ_MB5 (PRCMU_BASE_TCDM + 0xE44)
+#define PRCM_ACK_MB5 (PRCMU_BASE_TCDM + 0xDF4)
+#define PRCM_XP70_CUR_PWR_STATE (PRCMU_BASE_TCDM + 0xFFC)
/* Mailbox 5 Requests */
#define PRCM_REQ_MB5_I2COPTYPE_REG (PRCM_REQ_MB5 + 0x0)
#define PRCM_REQ_MB5_BIT_FIELDS (PRCM_REQ_MB5 + 0x1)
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-18 14:01:18 +0000