aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/cpu/armv7/u8500/Makefile9
-rw-r--r--arch/arm/cpu/armv7/u8500/clock.c225
-rw-r--r--arch/arm/cpu/armv7/u8500/cpu.c114
-rw-r--r--arch/arm/cpu/armv7/u8500/prcmu-fw-defs_v1.h586
-rw-r--r--arch/arm/cpu/armv7/u8500/prcmu.c269
-rw-r--r--arch/arm/include/asm/arch-u8500/ab8500.h510
-rw-r--r--arch/arm/include/asm/arch-u8500/clock.h49
-rw-r--r--arch/arm/include/asm/arch-u8500/common.h131
-rw-r--r--arch/arm/include/asm/arch-u8500/cpu.h85
-rw-r--r--arch/arm/include/asm/arch-u8500/hardware.h19
-rw-r--r--arch/arm/include/asm/arch-u8500/prcmu.h57
11 files changed, 2003 insertions, 51 deletions
diff --git a/arch/arm/cpu/armv7/u8500/Makefile b/arch/arm/cpu/armv7/u8500/Makefile
index 270aa40c8..2ce16f764 100644
--- a/arch/arm/cpu/armv7/u8500/Makefile
+++ b/arch/arm/cpu/armv7/u8500/Makefile
@@ -25,7 +25,14 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).o
-COBJS = timer.o clock.o
+
+COBJS += clock.o
+COBJS += cpu.o
+#COBJS += interrupts.o
+COBJS += prcmu.o
+COBJS += timer.o
+
+#COBJS = timer.o clock.o prcmu.o
SOBJS = lowlevel.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/arch/arm/cpu/armv7/u8500/clock.c b/arch/arm/cpu/armv7/u8500/clock.c
index 9e3b87394..004228110 100644
--- a/arch/arm/cpu/armv7/u8500/clock.c
+++ b/arch/arm/cpu/armv7/u8500/clock.c
@@ -22,9 +22,59 @@
#include <common.h>
#include <asm/io.h>
+#include <asm/arch/cpu.h>
#include <asm/arch/hardware.h>
+#include <asm/arch/prcmu.h>
-DECLARE_GLOBAL_DATA_PTR;
+/* PLLs for clock management registers */
+enum {
+ GATED = 0,
+ PLLSOC0, /* pllsw = 001, ffs() = 1 */
+ PLLSOC1, /* pllsw = 010, ffs() = 2 */
+ PLLDDR, /* pllsw = 100, ffs() = 3 */
+ PLLARM,
+};
+
+static struct pll_freq_regs {
+ int idx; /* index fror pll_name and pll_khz arrays */
+ uint32_t addr;
+} pll_freq_regs[] = {
+ {PLLSOC0, PRCM_PLLSOC0_FREQ_REG},
+ {PLLSOC1, PRCM_PLLSOC1_FREQ_REG},
+ {PLLDDR, PRCM_PLLDDR_FREQ_REG},
+ {PLLARM, PRCM_PLLARM_FREQ_REG},
+ {0, 0},
+};
+
+static const char *pll_name[5] = {"GATED", "SOC0", "SOC1", "DDR", "ARM"};
+static uint32_t pll_khz[5]; /* use ffs(pllsw(reg)) as index for 0..3 */
+
+static struct clk_mgt_regs {
+ uint32_t addr;
+ uint32_t val;
+ const char *descr;
+} clk_mgt_regs[] = {
+ /* register content taken from bootrom settings */
+ {PRCM_ARMCLKFIX_MGT_REG, 0x0120, "ARMCLKFIX"}, /* ena, SOC0/0, ??? */
+ {PRCM_ACLK_MGT_REG, 0x0125, "ACLK"}, /* ena, SOC0/5, 160 MHz */
+ {PRCM_SVAMMDSPCLK_MGT_REG, 0x1122, "SVA"}, /* ena, SOC0/2, 400 MHz */
+ {PRCM_SIAMMDSPCLK_MGT_REG, 0x0022, "SIA"}, /* dis, SOC0/2, 400 MHz */
+ {PRCM_SAAMMDSPCLK_MGT_REG, 0x0822, "SAA"}, /* dis, SOC0/4, 200 MHz */
+ {PRCM_SGACLK_MGT_REG, 0x0024, "SGA"}, /* dis, SOC0/4, 200 MHz */
+ {PRCM_UARTCLK_MGT_REG, 0x0300, "UART"}, /* ena, GATED, CLK38 */
+ {PRCM_MSPCLK_MGT_REG, 0x0200, "MSP"}, /* dis, GATED, CLK38 */
+ {PRCM_I2CCLK_MGT_REG, 0x0130, "I2C"}, /* ena, SOC0/16, 50 MHz */
+ {PRCM_SDMMCCLK_MGT_REG, 0x0130, "SDMMC"}, /* ena, SOC0/16, 50 MHz */
+ {PRCM_PER1CLK_MGT_REG, 0x126, "PER1"}, /* ena, SOC0/6, 133 MHz */
+ {PRCM_PER2CLK_MGT_REG, 0x126, "PER2"}, /* ena, SOC0/6, 133 MHz */
+ {PRCM_PER3CLK_MGT_REG, 0x126, "PER3"}, /* ena, SOC0/6, 133 MHz */
+ {PRCM_PER5CLK_MGT_REG, 0x126, "PER5"}, /* ena, SOC0/6, 133 MHz */
+ {PRCM_PER6CLK_MGT_REG, 0x126, "PER6"}, /* ena, SOC0/6, 133 MHz */
+ {PRCM_PER7CLK_MGT_REG, 0x128, "PER7"}, /* ena, SOC0/8, 100 MHz */
+ {PRCM_DMACLK_MGT_REG, 0x125, "DMA"}, /* ena, SOC0/5, 160 MHz */
+ {PRCM_B2R2CLK_MGT_REG, 0x025, "B2R2"}, /* dis, SOC0/5, 160 MHz */
+ {0, 0, NULL},
+};
struct clkrst {
unsigned int pcken;
@@ -44,7 +94,7 @@ static unsigned int clkrst_base[] = {
};
/* Turn on peripheral clock at PRCC level */
-void u8500_clock_enable(int periph, int cluster, int kern)
+static void clock_enable(int periph, int cluster, int kern)
{
struct clkrst *clkrst = (struct clkrst *) clkrst_base[periph - 1];
@@ -54,3 +104,174 @@ void u8500_clock_enable(int periph, int cluster, int kern)
if (cluster != -1)
writel(1 << cluster, &clkrst->pcken);
}
+
+/* Legacy function to allow drivers to enable their clock */
+void u8500_clock_enable(int periph, int cluster, int kern)
+{
+ clock_enable(periph, cluster, kern);
+}
+
+/* Main clock init function. Called from arch_cpu_init() */
+void db8500_clocks_init(void)
+{
+ /*
+ * Enable all clocks. This is u-boot, we can enable it all. There is no
+ * powersave in u-boot.
+ */
+
+ clock_enable(1, 9, -1); /* GPIO0 */
+
+ if (u8500_is_earlydrop())
+ clock_enable(2, 12, -1); /* GPIO1 */
+ else
+ clock_enable(2, 11, -1); /* GPIO1 */
+
+ clock_enable(3, 8, -1); /* GPIO2 */
+ clock_enable(5, 1, -1); /* GPIO3 */
+
+ clock_enable(3, 6, 6); /* UART2 */
+
+ clock_enable(3, 3, 3); /* I2C0 */
+
+ clock_enable(1, 5, 5); /* SDI0 */
+ clock_enable(2, 4, 2); /* SDI4 */
+
+ if (u8500_is_earlydrop())
+ clock_enable(7, 2, -1); /* MTU0 */
+ else if (cpu_is_u8500v1())
+ clock_enable(6, 7, -1); /* MTU0 */
+ else if (cpu_is_u8500v2())
+ clock_enable(6, 6, -1); /* MTU0 */
+
+ if (!u8500_is_earlydrop())
+ clock_enable(3, 4, 4); /* SDI2 */
+
+ /*
+ * Enabling clocks for all devices which are AMBA devices in the
+ * kernel. Otherwise they will not get probe()'d because the
+ * peripheral ID register will not be powered.
+ */
+
+ /* XXX: some of these differ between ED/V1 */
+
+ clock_enable(1, 1, 1); /* UART1 */
+ clock_enable(1, 0, 0); /* UART0 */
+
+ clock_enable(3, 2, 2); /* SSP1 */
+ clock_enable(3, 1, 1); /* SSP0 */
+
+ clock_enable(2, 8, -1); /* SPI0 */
+ clock_enable(2, 5, 3); /* MSP2 */
+}
+
+/*
+ * get_pll_freq_khz - return PLL frequency in kHz
+ */
+static uint32_t get_pll_freq_khz(uint32_t inclk_khz, uint32_t freq_reg)
+{
+ uint32_t idf, ldf, odf, seldiv, phi;
+
+ /*
+ * PLLOUTCLK = PHI = (INCLK*LDF)/(2*ODF*IDF) if SELDIV2=0
+ * PLLOUTCLK = PHI = (INCLK*LDF)/(4*ODF*IDF) if SELDIV2=1
+ * where:
+ * IDF=R(2:0) (when R=000, IDF=1d)
+ * LDF = 2*D(7:0) (D must be greater than or equal to 6)
+ * ODF = N(5:0) (when N=000000, 0DF=1d)
+ */
+
+ idf = (freq_reg & 0x70000) >> 16;
+ ldf = (freq_reg & 0xff) * 2;
+ odf = (freq_reg & 0x3f00) >> 8;
+ seldiv = (freq_reg & 0x01000000) >> 24;
+ phi = (inclk_khz * ldf) / (2 * odf * idf);
+ if (seldiv)
+ phi = phi/2;
+
+ return phi;
+}
+
+u32 db8500_clock_cpu_khz(void)
+{
+ u32 reg, phi;
+
+ reg = readl(PRCM_ARM_CHGCLKREQ_REG);
+ if (reg & 1)
+ return 0; /* External clock */
+
+ reg = readl(PRCM_PLLARM_FREQ_REG);
+ phi = get_pll_freq_khz(38400, reg);
+
+ return phi;
+}
+
+int do_clkinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ uint32_t inclk_khz;
+ uint32_t reg, phi;
+ uint32_t clk_khz;
+ unsigned int clk_sel;
+ struct clk_mgt_regs *clks = clk_mgt_regs;
+ struct pll_freq_regs *plls = pll_freq_regs;
+
+ /* Parameters are not used */
+ (void) cmdtp;
+ (void) flag;
+ (void) argc;
+ (void) argv;
+
+ /*
+ * Go through list of PLLs.
+ * Initialise pll out frequency array (pll_khz) and print frequency.
+ */
+ inclk_khz = 38400; /* 38.4 MHz */
+ while (plls->addr) {
+ reg = readl(plls->addr);
+ phi = get_pll_freq_khz(inclk_khz, reg);
+ pll_khz[plls->idx] = phi;
+ printf("%s PLL out frequency: %d.%d Mhz\n",
+ pll_name[plls->idx], phi/1000, phi % 1000);
+ plls++;
+ }
+
+ /* check ARM clock source */
+ reg = readl(PRCM_ARM_CHGCLKREQ_REG);
+ printf("A9 running on ");
+ if (reg & 1)
+ printf("external clock");
+ else
+ printf("ARM PLL");
+ printf("\n");
+
+ /* go through list of clk_mgt_reg */
+ printf("\n%19s %9s %7s %9s enabled\n",
+ "name(addr)", "value", "PLL", "CLK[MHz]");
+ while (clks->addr) {
+ reg = readl(clks->addr);
+ /* convert bit position into array index */
+ clk_sel = ffs((reg >> 5) & 0x7); /* PLLSW[2:0] */
+ printf("%9s(%08x): %08x", clks->descr, clks->addr, reg);
+ printf(", %6s", pll_name[clk_sel]);
+ if (reg & 0x200)
+ clk_khz = 38400; /* CLK38 is set */
+ else if ((reg & 0x1f) == 0)
+ /* ARMCLKFIX_MGT is 0x120, e.g. div = 0 ! */
+ clk_khz = 0;
+ else
+ clk_khz = pll_khz[clk_sel] / (reg & 0x1f);
+ printf(", %4d.%03d", clk_khz / 1000, clk_khz % 1000);
+ printf(", %s\n", (reg & 0x100) ? "ena" : "dis");
+ clks++;
+ }
+
+ return 0;
+}
+
+#if 0
+U_BOOT_CMD(
+ clkinfo, 1, 1, do_clkinfo,
+ "print clock info",
+ ""
+);
+#endif
+
diff --git a/arch/arm/cpu/armv7/u8500/cpu.c b/arch/arm/cpu/armv7/u8500/cpu.c
new file mode 100644
index 000000000..e05eaad9b
--- /dev/null
+++ b/arch/arm/cpu/armv7/u8500/cpu.c
@@ -0,0 +1,114 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Joakim Axelsson <joakim.axelsson at stericsson.com>
+ * for ST-Ericsson.
+ *
+ * Origin: Most part are moved here from old board code for u8500.
+ *
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/prcmu.h>
+
+#ifdef CONFIG_ARCH_CPU_INIT
+
+/* Old table to init ED version of db8500. Should be removed */
+unsigned int addr_vall_arr[] = {
+0x8011F000, 0x0000FFFF, /* Clocks for HSI TODO Enable reqd only */
+0x8011F008, 0x00001CFF, /* Clocks for HSI TODO Enable reqd only */
+0x8000F000, 0x00007FFF, /* Clocks for I2C TODO Enable reqd only */
+0x8000F008, 0x00007FFF, /* Clocks for I2C TODO Enable reqd only */
+0x80157020, 0x00000150, /* I2C 48MHz clock */
+0x8012F000, 0x00007FFF, /* Clocks for SD TODO Enable reqd only */
+0x8012F008, 0x00007FFF, /* Clocks for SD TODO Enable reqd only */
+0xA03DF000, 0x0000000D, /* Clock for MTU Timers */
+0x8011E00C, 0x00000000, /* GPIO ALT FUNC for EMMC */
+0x8011E004, 0x0000FFE0, /* GPIO ALT FUNC for EMMC */
+0x8011E020, 0x0000FFE0, /* GPIO ALT FUNC for EMMC */
+0x8011E024, 0x00000000, /* GPIO ALT FUNC for EMMC */
+0x8012E000, 0x20000000, /* GPIO ALT FUNC for UART */
+0x8012E00C, 0x00000000, /* GPIO ALT FUNC for SD */
+0x8012E004, 0x0FFC0000, /* GPIO ALT FUNC for SD */
+0x8012E020, 0x60000000, /* GPIO ALT FUNC for SD */
+0x8012E024, 0x60000000, /* GPIO ALT FUNC for SD */
+0x801571E4, 0x0000000C, /* PRCMU settings for B2R2, PRCM_APE_RESETN_SET_REG */
+0x80157024, 0x00000130, /* PRCMU settings for EMMC/SD */
+0xA03FF000, 0x00000003, /* USB */
+0xA03FF008, 0x00000001, /* USB */
+0xA03FE00C, 0x00000000, /* USB */
+0xA03FE020, 0x00000FFF, /* USB */
+0xA03FE024, 0x00000000 /* USB */
+};
+
+static void init_regs(void)
+{
+ /* FIXME Remove magic register array settings for ED also */
+ if (u8500_is_earlydrop()) {
+ unsigned i;
+
+ for (i = 0; i < ARRAY_SIZE(addr_vall_arr)/2; i++)
+ *((volatile unsigned int *)(addr_vall_arr[2 * i]))
+ = addr_vall_arr[(2 * i) + 1];
+ } else {
+ db8500_prcmu_init();
+ db8500_clocks_init();
+ }
+}
+
+/*
+ * SOC specific cpu init
+ */
+int arch_cpu_init(void)
+{
+ if (u8500_is_earlydrop())
+ /* MTU timer clock always enabled (not clocked) */
+ writel(0x20000, PRCM_TCR);
+
+ icache_enable();
+ init_regs();
+
+ return 0;
+}
+#endif /* CONFIG_ARCH_CPU_INIT */
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+int print_cpuinfo(void)
+{
+ char *version, *clock;
+ char clockbuf[24];
+ uint32_t arm_khz;
+
+ /* CPU version: Match most likly CPU first */
+ if (cpu_is_u8500v2())
+ version = "v2";
+ else if (cpu_is_u8500v11())
+ version = "v1.1";
+ else if (cpu_is_u8500v1())
+ version = "v1";
+ else if (u8500_is_earlydrop())
+ version = "ED";
+ else
+ version = "Unknown";
+
+ /* CPU clock speed */
+ arm_khz = db8500_clock_cpu_khz();
+ if (arm_khz == 0)
+ clock = "External clock";
+ else {
+ sprintf(clockbuf, "%u.%u Mhz",
+ arm_khz / 1000, arm_khz % 1000);
+ clock = clockbuf;
+ }
+
+ printf("CPU:\tST-Ericsson db8500 %s (Dual ARM Cortex A9) %s\n",
+ version, clock);
+
+ return 0;
+}
+#endif /* CONFIG_DISPLAY_CPUINFO */
+
diff --git a/arch/arm/cpu/armv7/u8500/prcmu-fw-defs_v1.h b/arch/arm/cpu/armv7/u8500/prcmu-fw-defs_v1.h
new file mode 100644
index 000000000..27b6a3449
--- /dev/null
+++ b/arch/arm/cpu/armv7/u8500/prcmu-fw-defs_v1.h
@@ -0,0 +1,586 @@
+/*
+ * Copyright (c) 2009 ST-Ericsson SA
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * Copied from the Linux version:
+ * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
+ */
+
+#ifndef __MACH_PRCMU_FW_DEFS_V1_H
+#define __MACH_PRCMU_FW_DEFS_V1_H
+
+/**
+ * enum state_t - ON/OFF state definition
+ * @OFF: State is ON
+ * @ON: State is OFF
+ *
+ */
+enum state_t {
+ OFF = 0x0,
+ ON = 0x1,
+};
+
+/**
+ * enum ret_state_t - general purpose On/Off/Retention states
+ *
+ */
+enum ret_state_t {
+ OFFST = 0,
+ ONST = 1,
+ RETST = 2
+};
+
+
+/**
+ * enum clk_arm_t - ARM Cortex A9 clock schemes
+ * @A9_OFF:
+ * @A9_BOOT:
+ * @A9_OPPT1:
+ * @A9_OPPT2:
+ * @A9_EXTCLK:
+ */
+enum clk_arm_t {
+ A9_OFF,
+ A9_BOOT,
+ A9_OPPT1,
+ A9_OPPT2,
+ A9_EXTCLK
+};
+
+/**
+ * enum clk_gen_t - GEN#0/GEN#1 clock schemes
+ * @GEN_OFF:
+ * @GEN_BOOT:
+ * @GEN_OPPT1:
+ */
+enum clk_gen_t {
+ GEN_OFF,
+ GEN_BOOT,
+ GEN_OPPT1,
+};
+
+/* some information between arm and xp70 */
+
+/**
+ * enum romcode_write_t - Romcode message written by A9 AND read by XP70
+ * @RDY_2_DS: Value set when ApDeepSleep state can be executed by XP70
+ * @RDY_2_XP70_RST: Value set when 0x0F has been successfully polled by the
+ * romcode. The xp70 will go into self-reset
+ */
+enum romcode_write_t {
+ RDY_2_DS = 0x09,
+ RDY_2_XP70_RST = 0x10
+};
+
+/**
+ * enum romcode_read_t - Romcode message written by XP70 and read by A9
+ * @INIT: Init value when romcode field is not used
+ * @FS_2_DS: Value set when power state is going from ApExecute to
+ * ApDeepSleep
+ * @END_DS: Value set when ApDeepSleep power state is reached coming from
+ * ApExecute state
+ * @DS_TO_FS: Value set when power state is going from ApDeepSleep to
+ * ApExecute
+ * @END_FS: Value set when ApExecute power state is reached coming from
+ * ApDeepSleep state
+ * @SWR: Value set when power state is going to ApReset
+ * @END_SWR: Value set when the xp70 finished executing ApReset actions and
+ * waits for romcode acknowledgment to go to self-reset
+ */
+enum romcode_read_t {
+ INIT = 0x00,
+ FS_2_DS = 0x0A,
+ END_DS = 0x0B,
+ DS_TO_FS = 0x0C,
+ END_FS = 0x0D,
+ SWR = 0x0E,
+ END_SWR = 0x0F
+};
+
+
+/**
+ * enum pingpong_t
+ * @PING: value is 0
+ * @PONG: value is 1
+ *
+ * implementation issue: the values are chosen the way that
+ * we can change from ping to pong (resp. pong to ping) by
+ * simply using the 'not' operator in C, e.g. toggling operation:
+ * t_PingPong p = ping; p = ~p;
+ */
+enum pingpong_t {
+ PRCMU_PING = 0x00,
+ PRCMU_PONG = 0xFF
+};
+
+/**
+ * enum wkup_reason_fdst_t
+ * @EVTWR: event has been read by ARM
+ * @EVTST: event has been sent by PRCMU FW
+ * @EVTRD: event has been written by PRCMU FW
+ */
+enum wkup_reason_fdst_t {
+ /* WRF has been written but neither sent nor read by the arm */
+ EVTWR = 1,
+ /* WRF has been written and sent, but not yet read by the arm */
+ EVTST = 2,
+ /* WRF has been written, sent and read by the arm */
+ EVTRD = 0
+}; /* Wake-up reason Field State */
+
+
+
+/**
+ * enum ap_pwrst_t - current power states defined in PRCMU firmware
+ * @NO_PWRST: Current power state init
+ * @AP_BOOT: Current power state is apBoot
+ * @AP_EXECUTE: Current power state is apExecute
+ * @AP_DEEP_SLEEP: Current power state is apDeepSleep
+ * @AP_SLEEP: Current power state is apSleep
+ * @AP_IDLE: Current power state is apIdle
+ * @AP_RESET: Current power state is apReset
+ */
+enum ap_pwrst_t {
+ NO_PWRST = 0x00,
+ AP_BOOT = 0x01,
+ AP_EXECUTE = 0x02,
+ AP_DEEP_SLEEP = 0x03,
+ AP_SLEEP = 0x04,
+ AP_IDLE = 0x05,
+ AP_RESET = 0x06
+};
+
+/**
+ * enum ap_pwrst_trans_t - Transition states defined in PRCMU firmware
+ * @NO_TRANSITION: No power state transition
+ * @APEXECUTE_TO_APSLEEP: Power state transition from ApExecute to ApSleep
+ * @APIDLE_TO_APSLEEP: Power state transition from ApIdle to ApSleep
+ * @APBOOT_TO_APEXECUTE: Power state transition from ApBoot to ApExecute
+ * @APEXECUTE_TO_APDEEPSLEEP: Power state transition from ApExecute to
+ * ApDeepSleep
+ * @APEXECUTE_TO_APIDLE: Power state transition from ApExecute to ApIdle
+ */
+enum ap_pwrst_trans_t {
+ NO_TRANSITION = 0x00,
+ APEXECUTE_TO_APSLEEP = 0x01,
+ APIDLE_TO_APSLEEP = 0x02,
+ APBOOT_TO_APEXECUTE = 0x03,
+ APEXECUTE_TO_APDEEPSLEEP = 0x04,
+ APEXECUTE_TO_APIDLE = 0x05
+};
+
+/**
+ * enum ddr_pwrst_t - DDR power states definition
+ * @DDR_PWR_STATE_UNCHANGED: SDRAM and DDR controller state is unchanged
+ * @DDR_PWR_STATE_ON:
+ * @DDR_PWR_STATE_OFFLOWLAT:
+ * @DDR_PWR_STATE_OFFHIGHLAT:
+ */
+enum ddr_pwrst_t {
+ DDR_PWR_STATE_UNCHANGED = 0x00,
+ DDR_PWR_STATE_ON = 0x01,
+ DDR_PWR_STATE_OFFLOWLAT = 0x02,
+ DDR_PWR_STATE_OFFHIGHLAT = 0x03
+};
+
+/**
+ * enum arm_opp_t - ARM OPP states definition
+ * @ARM_NO_CHANGE: The ARM operating point is unchanged
+ * @ARM_100_OPP: The new ARM operating point is arm100opp
+ * @ARM_50_OPP: The new ARM operating point is arm100opp
+ * @ARM_EXTCLK: The new ARM operating point is armExtClk
+ */
+enum arm_opp_t {
+ ARM_NO_CHANGE = 0x00,
+ ARM_100_OPP = 0x02,
+ ARM_50_OPP = 0x03,
+ ARM_EXTCLK = 0x07
+};
+
+/**
+ * enum ape_opp_t - APE OPP states definition
+ * @APE_NO_CHANGE: The APE operating point is unchanged
+ * @APE_100_OPP: The new APE operating point is ape100opp
+ */
+enum ape_opp_t {
+ APE_NO_CHANGE = 0x00,
+ APE_100_OPP = 0x02,
+ APE_50_OPP = 0x03
+};
+
+/**
+ * enum hw_accst_t - State definition for hardware accelerator
+ * @HW_NO_CHANGE: The hardware accelerator state must remain unchanged
+ * @HW_OFF: The hardware accelerator must be switched off
+ * @HW_OFF_RAMRET: The hardware accelerator must be switched off with its
+ * internal RAM in retention
+ * @HW_ON: The hwa hadware accelerator hwa must be switched on
+ */
+enum hw_accst_t {
+ HW_NO_CHANGE = 0x00,
+ HW_OFF = 0x01,
+ HW_OFF_RAMRET = 0x02,
+ HW_ON = 0x03
+};
+
+/**
+ * enum mbox_2_arm_stat_t - Status messages definition for mbox_arm
+ * @BOOT_TO_EXECUTEOK: The apBoot to apExecute state transition has been
+ * completed
+ * @DEEPSLEEPOK: The apExecute to apDeepSleep state transition has been
+ * completed
+ * @SLEEPOK: The apExecute to apSleep state transition has been completed
+ * @IDLEOK: The apExecute to apIdle state transition has been completed
+ * @SOFTRESETOK: The A9 watchdog/ SoftReset state has been completed
+ * @SOFTRESETGO : The A9 watchdog/SoftReset state is on going
+ * @BOOT_TO_EXECUTE: The apBoot to apExecute state transition is on going
+ * @EXECUTE_TO_DEEPSLEEP: The apExecute to apDeepSleep state transition is on
+ * going
+ * @DEEPSLEEP_TO_EXECUTE: The apDeepSleep to apExecute state transition is on
+ * going
+ * @DEEPSLEEP_TO_EXECUTEOK: The apDeepSleep to apExecute state transition has
+ * been completed
+ * @EXECUTE_TO_SLEEP: The apExecute to apSleep state transition is on going
+ * @SLEEP_TO_EXECUTE: The apSleep to apExecute state transition is on going
+ * @SLEEP_TO_EXECUTEOK: The apSleep to apExecute state transition has been
+ * completed
+ * @EXECUTE_TO_IDLE: The apExecute to apIdle state transition is on going
+ * @IDLE_TO_EXECUTE: The apIdle to apExecute state transition is on going
+ * @IDLE_TO_EXECUTEOK: The apIdle to apExecute state transition has been
+ * completed
+ * @INIT_STATUS: Status init
+ */
+enum ap_pwrsttr_status_t {
+ BOOT_TO_EXECUTEOK = 0xFF,
+ DEEPSLEEPOK = 0xFE,
+ SLEEPOK = 0xFD,
+ IDLEOK = 0xFC,
+ SOFTRESETOK = 0xFB,
+ SOFTRESETGO = 0xFA,
+ BOOT_TO_EXECUTE = 0xF9,
+ EXECUTE_TO_DEEPSLEEP = 0xF8,
+ DEEPSLEEP_TO_EXECUTE = 0xF7,
+ DEEPSLEEP_TO_EXECUTEOK = 0xF6,
+ EXECUTE_TO_SLEEP = 0xF5,
+ SLEEP_TO_EXECUTE = 0xF4,
+ SLEEP_TO_EXECUTEOK = 0xF3,
+ EXECUTE_TO_IDLE = 0xF2,
+ IDLE_TO_EXECUTE = 0xF1,
+ IDLE_TO_EXECUTEOK = 0xF0,
+ RDYTODS_RETURNTOEXE = 0xEF,
+ NORDYTODS_RETURNTOEXE = 0xEE,
+ EXETOSLEEP_RETURNTOEXE = 0xED,
+ EXETOIDLE_RETURNTOEXE = 0xEC,
+ INIT_STATUS = 0xEB,
+
+ /*error messages */
+ INITERROR = 0x00,
+ PLLARMLOCKP_ER = 0x01,
+ PLLDDRLOCKP_ER = 0x02,
+ PLLSOCLOCKP_ER = 0x03,
+ PLLSOCK1LOCKP_ER = 0x04,
+ ARMWFI_ER = 0x05,
+ SYSCLKOK_ER = 0x06,
+ I2C_NACK_DATA_ER = 0x07,
+ BOOT_ER = 0x08,
+ I2C_STATUS_ALWAYS_1 = 0x0A,
+ I2C_NACK_REG_ADDR_ER = 0x0B,
+ I2C_NACK_DATA0123_ER = 0x1B,
+ I2C_NACK_ADDR_ER = 0x1F,
+ CURAPPWRSTISNOT_BOOT = 0x20,
+ CURAPPWRSTISNOT_EXECUTE = 0x21,
+ CURAPPWRSTISNOT_SLEEPMODE = 0x22,
+ CURAPPWRSTISNOT_CORRECTFORIT10 = 0x23,
+ FIFO4500WUISNOT_WUPEVENT = 0x24,
+ PLL32KLOCKP_ER = 0x29,
+ DDRDEEPSLEEPOK_ER = 0x2A,
+ ROMCODEREADY_ER = 0x50,
+ WUPBEFOREDS = 0x51,
+ DDRCONFIG_ER = 0x52,
+ WUPBEFORESLEEP = 0x53,
+ WUPBEFOREIDLE = 0x54
+}; /* earlier called as mbox_2_arm_stat_t */
+
+
+/**
+ * enum dvfs_stat_t - DVFS status messages definition
+ * @DVFS_GO: A state transition DVFS is on going
+ * @DVFS_ARM100OPPOK: The state transition DVFS has been completed for 100OPP
+ * @DVFS_ARM50OPPOK: The state transition DVFS has been completed for 50OPP
+ * @DVFS_ARMEXTCLKOK: The state transition DVFS has been completed for EXTCLK
+ * @DVFS_NOCHGTCLKOK: The state transition DVFS has been completed for
+ * NOCHGCLK
+ * @DVFS_INITSTATUS: Value init
+ */
+enum dvfs_stat_t {
+ DVFS_GO = 0xFF,
+ DVFS_ARM100OPPOK = 0xFE,
+ DVFS_ARM50OPPOK = 0xFD,
+ DVFS_ARMEXTCLKOK = 0xFC,
+ DVFS_NOCHGTCLKOK = 0xFB,
+ DVFS_INITSTATUS = 0x00
+};
+
+/**
+ * enum mbox_2_arm_hwacc_pwr_stat_t - Hardware Accelarator status message
+ * @HWACC_PWRST_GO: A state transition on hardware accelerator is on going
+ * @HWACC_PWRST_OK: The state transition on hardware accelerator has been
+ * completed
+ * @HWACC_PWRSTATUS_INIT: Value init
+ */
+enum mbox_2_arm_hwacc_pwr_stat_t {
+ HWACC_PWRST_GO = 0xFF,
+ HWACC_PWRST_OK = 0xFE,
+ HWACC_PWRSTATUS_INIT = 0x00
+};
+
+/**
+ * enum sva_mmdsp_stat_t - SVA MMDSP status messages
+ * @SVA_MMDSP_GO: SVAMMDSP interrupt has happened
+ * @SVA_MMDSP_INIT: Status init
+ */
+enum sva_mmdsp_stat_t {
+ SVA_MMDSP_GO = 0xFF,
+ SVA_MMDSP_INIT = 0x00
+};
+
+/**
+ * enum sia_mmdsp_stat_t - SIA MMDSP status messages
+ * @SIA_MMDSP_GO: SIAMMDSP interrupt has happened
+ * @SIA_MMDSP_INIT: Status init
+ */
+enum sia_mmdsp_stat_t {
+ SIA_MMDSP_GO = 0xFF,
+ SIA_MMDSP_INIT = 0x00
+};
+
+/**
+ * enum intr_wakeup_t - Configure STW4500 FIFO interrupt as wake-up
+ * @NTR_NOT_AS_WAKEUP: The 4500 fifo interrupt is not configured as a
+ * wake-up event
+ * @INTR_AS_WAKEUP: The 4500 fifo interrupt is configured as a wake-up event
+ */
+enum intr_wakeup_t {
+ INTR_NOT_AS_WAKEUP = 0x0,
+ INTR_AS_WAKEUP = 0x1
+};
+
+/**
+ * enum mbox_to_arm_err_t - Error messages definition
+ * @INIT_ERR: Init value
+ * @PLLARMLOCKP_ERR: PLLARM has not been correctly locked in given time
+ * @PLLDDRLOCKP_ERR: PLLDDR has not been correctly locked in the given time
+ * @PLLSOC0LOCKP_ERR: PLLSOC0 has not been correctly locked in the given time
+ * @PLLSOC1LOCKP_ERR: PLLSOC1 has not been correctly locked in the given time
+ * @ARMWFI_ERR: The ARM WFI has not been correctly executed in the given time
+ * @SYSCLKOK_ERR: The SYSCLK is not available in the given time
+ * @BOOT_ERR: Romcode has not validated the XP70 self reset in the given time
+ * @ROMCODESAVECONTEXT: The Romcode didn.t correctly save it secure context
+ * @VARMHIGHSPEEDVALTO_ERR: The ARM high speed supply value transfered
+ * through I2C has not been correctly executed in the given time
+ * @VARMHIGHSPEEDACCESS_ERR: The command value of VarmHighSpeedVal transfered
+ * through I2C has not been correctly executed in the given time
+ * @VARMLOWSPEEDVALTO_ERR:The ARM low speed supply value transfered through
+ * I2C has not been correctly executed in the given time
+ * @VARMLOWSPEEDACCESS_ERR: The command value of VarmLowSpeedVal transfered
+ * through I2C has not been correctly executed in the given time
+ * @VARMRETENTIONVALTO_ERR: The ARM retention supply value transfered through
+ * I2C has not been correctly executed in the given time
+ * @VARMRETENTIONACCESS_ERR: The command value of VarmRetentionVal transfered
+ * through I2C has not been correctly executed in the given time
+ * @VAPEHIGHSPEEDVALTO_ERR: The APE highspeed supply value transfered through
+ * I2C has not been correctly executed in the given time
+ * @VSAFEHPVALTO_ERR: The SAFE high power supply value transfered through I2C
+ * has not been correctly executed in the given time
+ * @VMODSEL1VALTO_ERR: The MODEM sel1 supply value transfered through I2C has
+ * not been correctly executed in the given time
+ * @VMODSEL2VALTO_ERR: The MODEM sel2 supply value transfered through I2C has
+ * not been correctly executed in the given time
+ * @VARMOFFACCESS_ERR: The command value of Varm ON/OFF transfered through
+ * I2C has not been correctly executed in the given time
+ * @VAPEOFFACCESS_ERR: The command value of Vape ON/OFF transfered through
+ * I2C has not been correctly executed in the given time
+ * @VARMRETACCES_ERR: The command value of Varm retention ON/OFF transfered
+ * through I2C has not been correctly executed in the given time
+ * @CURAPPWRSTISNOTBOOT:Generated when Arm want to do power state transition
+ * ApBoot to ApExecute but the power current state is not Apboot
+ * @CURAPPWRSTISNOTEXECUTE: Generated when Arm want to do power state
+ * transition from ApExecute to others power state but the
+ * power current state is not ApExecute
+ * @CURAPPWRSTISNOTSLEEPMODE: Generated when wake up events are transmitted
+ * but the power current state is not ApDeepSleep/ApSleep/ApIdle
+ * @CURAPPWRSTISNOTCORRECTDBG: Generated when wake up events are transmitted
+ * but the power current state is not correct
+ * @ARMREGU1VALTO_ERR:The ArmRegu1 value transferred through I2C has not
+ * been correctly executed in the given time
+ * @ARMREGU2VALTO_ERR: The ArmRegu2 value transferred through I2C has not
+ * been correctly executed in the given time
+ * @VAPEREGUVALTO_ERR: The VApeRegu value transfered through I2C has not
+ * been correctly executed in the given time
+ * @VSMPS3REGUVALTO_ERR: The VSmps3Regu value transfered through I2C has not
+ * been correctly executed in the given time
+ * @VMODREGUVALTO_ERR: The VModemRegu value transfered through I2C has not
+ * been correctly executed in the given time
+ */
+enum mbox_to_arm_err_t {
+ INIT_ERR = 0x00,
+ PLLARMLOCKP_ERR = 0x01,
+ PLLDDRLOCKP_ERR = 0x02,
+ PLLSOC0LOCKP_ERR = 0x03,
+ PLLSOC1LOCKP_ERR = 0x04,
+ ARMWFI_ERR = 0x05,
+ SYSCLKOK_ERR = 0x06,
+ BOOT_ERR = 0x07,
+ ROMCODESAVECONTEXT = 0x08,
+ VARMHIGHSPEEDVALTO_ERR = 0x10,
+ VARMHIGHSPEEDACCESS_ERR = 0x11,
+ VARMLOWSPEEDVALTO_ERR = 0x12,
+ VARMLOWSPEEDACCESS_ERR = 0x13,
+ VARMRETENTIONVALTO_ERR = 0x14,
+ VARMRETENTIONACCESS_ERR = 0x15,
+ VAPEHIGHSPEEDVALTO_ERR = 0x16,
+ VSAFEHPVALTO_ERR = 0x17,
+ VMODSEL1VALTO_ERR = 0x18,
+ VMODSEL2VALTO_ERR = 0x19,
+ VARMOFFACCESS_ERR = 0x1A,
+ VAPEOFFACCESS_ERR = 0x1B,
+ VARMRETACCES_ERR = 0x1C,
+ CURAPPWRSTISNOTBOOT = 0x20,
+ CURAPPWRSTISNOTEXECUTE = 0x21,
+ CURAPPWRSTISNOTSLEEPMODE = 0x22,
+ CURAPPWRSTISNOTCORRECTDBG = 0x23,
+ ARMREGU1VALTO_ERR = 0x24,
+ ARMREGU2VALTO_ERR = 0x25,
+ VAPEREGUVALTO_ERR = 0x26,
+ VSMPS3REGUVALTO_ERR = 0x27,
+ VMODREGUVALTO_ERR = 0x28
+};
+
+enum hw_acc_t {
+ SVAMMDSP = 0,
+ SVAPIPE = 1,
+ SIAMMDSP = 2,
+ SIAPIPE = 3,
+ SGA = 4,
+ B2R2MCDE = 5,
+ ESRAM1 = 6,
+ ESRAM2 = 7,
+ ESRAM3 = 8,
+ ESRAM4 = 9
+};
+
+enum reqmb0_header_t {
+ PWRSTTRH = 0,
+ WKUPCFG_EXEH = 1,
+ WKUP_EXEH = 2,
+ RDWKUPACKH = 3,
+ WKUPCFG_SLEEPH = 4,
+ WKUP_SLEEPH = 5,
+};
+
+enum cs_pwrmgt_t {
+ PWRDNCS0 = 0,
+ WKUPCS0 = 1,
+ PWRDNCS1 = 2,
+ WKUPCS1 = 3
+};
+
+enum reqmb2_header_t {
+ DPS_H = 0,
+ HW_ACCT_AUTO_PWR_H = 1,
+};
+
+
+/* Defs related to autonomous power management */
+
+/**
+ * enum sia_sva_pwr_policy_t - Power policy
+ * @NO_CHGT: No change
+ * @DSPOFF_HWPOFF:
+ * @DSPOFFRAMRET_HWPOFF:
+ * @DSPCLKOFF_HWPOFF:
+ * @DSPCLKOFF_HWPCLKOFF:
+ *
+ */
+enum sia_sva_pwr_policy_t {
+ NO_CHGT = 0x0,
+ DSPOFF_HWPOFF = 0x1,
+ DSPOFFRAMRET_HWPOFF = 0x2,
+ DSPCLKOFF_HWPOFF = 0x3,
+ DSPCLKOFF_HWPCLKOFF = 0x4,
+};
+
+/**
+ * enum auto_enable_t - Auto Power enable
+ * @AUTO_OFF:
+ * @AUTO_ON:
+ *
+ */
+enum auto_enable_t {
+ AUTO_OFF = 0x0,
+ AUTO_ON = 0x1,
+};
+
+
+/**
+ * enum reqmb4_header_t -Header type for mail box 4
+ * @MEMSTH: The ARM can set what are the expected memory states depending on
+ * the AP power states.
+ * @PARTIALREFRESHH: ARM has to update MR16 & MR17 of SDRAM register, for
+ * partial-refresh of SDRAM, via this mailbox
+ * @AUTOREFRESHH: Enable to change cycle count before enabling automatic
+ * DDR self-refresh
+ * @CSPWRDNH: Enables to lock/unlock one of SDRAM memory cut in self-refresh
+ * In V2,this service will enable to put CS in pwrdn
+ * @SYSCLKH: Enables to switch SYSCLK ON/OFF on the AP side
+ * @USBWKUPH: Used to enable USB wakeup event of PRCMU
+ */
+enum reqmb4_header_t {
+ MEM_ST_H = 0,
+ PARTIAL_S_REFRESH_H = 1,
+ AUTO_REFRESH_H = 2,
+ CS_PWRDN_H = 3,
+ SYSCLK_H = 5,
+ AUTO_PWR_H = 6,
+ USB_WKUP_H = 7
+};
+
+enum ack_mb4_status_t {
+ ACKMB4_INIT = 0,
+ SYSCLKON_OK = 1,
+ DDRON_OK = 2
+};
+
+enum I2C_op_t {
+ I2CWRITE = 0,
+ I2CREAD = 1
+};
+
+enum ack_mb5_status_t {
+ ACKMB5_INIT = 0x00,
+ I2C_WR_OK = 0x01,
+ I2C_RD_OK = 0x02,
+ SYSCLK_OK = 0x03,
+ I2C_TIMEOUT = 0x11,
+ SYSCLK_ER = 0x12,
+ /*Error Status resent by PRCM_HWI2C_SR*/
+ I2CWR_NACK_DATA_ER = 0x07,
+ I2CWR_NACK_REG_ADDR_ER = 0x0B,
+ I2CRDWR_NACK_DATA0123_ER = 0x1B,
+ I2CWR_NACK_ADDR_ER = 0x1F,
+ I2CRD_NACK_ADDR_INIT_ER = 0x0F,
+ I2CRD_NACK_REG_ADDR_INIT_ER = 0x13,
+ I2CRD_NACK_ADDR_ER = 0x17
+};
+
+enum ack_mb7_status_t {
+ MOD_SW_RESET_REQ = 0x03,
+ CA_SLEEP_REQ = 0x02,
+ HOST_PORT_ACK = 0x01,
+ ACKMB7_INIT = 0x00
+};
+
+#endif /* __MACH_PRCMU_FW_DEFS_V1_H */
diff --git a/arch/arm/cpu/armv7/u8500/prcmu.c b/arch/arm/cpu/armv7/u8500/prcmu.c
new file mode 100644
index 000000000..d4337f739
--- /dev/null
+++ b/arch/arm/cpu/armv7/u8500/prcmu.c
@@ -0,0 +1,269 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson SA
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * Adapted from the Linux version:
+ * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
+ */
+
+/*
+ * NOTE: This currently does not support the I2C workaround access method.
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/prcmu.h>
+#include <asm/types.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+
+#include <asm/arch/ab8500.h>
+
+#include <asm/arch/common.h>
+#include "prcmu-fw-defs_v1.h"
+
+#ifndef DEBUG
+#define DEBUG 0
+#endif
+
+#define dbg_printk(format, arg...) \
+ if (DEBUG) \
+ printf("prcmu: " format, ##arg) \
+
+#define PRCMU_BASE U8500_PRCMU_BASE
+
+#define PRCM_MBOX_CPU_VAL (PRCMU_BASE + 0x0fc)
+#define PRCM_MBOX_CPU_SET (PRCMU_BASE + 0x100)
+/* register for Ack mailbox interrupts */
+#define PRCM_ARM_IT1_CLEAR (PRCMU_BASE + 0x48C)
+#define PRCM_ARM_IT1_VAL (PRCMU_BASE + 0x494)
+
+#define PRCM_XP70_CUR_PWR_STATE (tcdm_base + 0xFFC)
+
+#define PRCM_REQ_MB5 (tcdm_base + 0xE44)
+#define PRCM_ACK_MB5 (tcdm_base + 0xDF4)
+
+/* Mailbox 5 Requests */
+#define PRCM_REQ_MB5_I2COPTYPE_REG (PRCM_REQ_MB5 + 0x0)
+#define PRCM_REQ_MB5_BIT_FIELDS (PRCM_REQ_MB5 + 0x1)
+#define PRCM_REQ_MB5_I2CSLAVE (PRCM_REQ_MB5 + 0x2)
+#define PRCM_REQ_MB5_I2CVAL (PRCM_REQ_MB5 + 0x3)
+
+/* Mailbox 5 ACKs */
+#define PRCM_ACK_MB5_STATUS (PRCM_ACK_MB5 + 0x1)
+#define PRCM_ACK_MB5_SLAVE (PRCM_ACK_MB5 + 0x2)
+#define PRCM_ACK_MB5_VAL (PRCM_ACK_MB5 + 0x3)
+
+#define PRCMU_I2C_WRITE(slave) \
+ (((slave) << 1) | I2CWRITE | (cpu_is_u8500v2() ? (1 << 6) : 0))
+
+#define PRCMU_I2C_READ(slave) \
+ (((slave) << 1) | I2CREAD | (cpu_is_u8500v2() ? (1 << 6) : 0))
+
+#define I2C_MBOX_BIT (1 << 5)
+
+static void *tcdm_base;
+
+static int prcmu_is_ready(void)
+{
+ int ready;
+
+ if (!tcdm_base) {
+ if (cpu_is_u8500v1())
+ tcdm_base = (void *) U8500_PRCMU_TCDM_BASE_V1;
+ else if (cpu_is_u8500v2())
+ tcdm_base = (void *) U8500_PRCMU_TCDM_BASE;
+ else {
+ printf("PRCMU: Unsupported chip version\n");
+ return 0;
+ }
+ }
+
+ ready = readb(PRCM_XP70_CUR_PWR_STATE) == AP_EXECUTE;
+ if (!ready)
+ printf("PRCMU firmware not ready\n");
+
+ return ready;
+}
+
+static int wait_for_i2c_mbx_rdy(void)
+{
+ int timeout = 10000;
+
+ if (readl(PRCM_ARM_IT1_VAL) & I2C_MBOX_BIT) {
+ printf("prcmu: warning i2c mailbox was not acked\n");
+ /* clear mailbox 5 ack irq */
+ writel(I2C_MBOX_BIT, PRCM_ARM_IT1_CLEAR);
+ }
+
+ /* check any already on-going transaction */
+ while ((readl(PRCM_MBOX_CPU_VAL) & I2C_MBOX_BIT) && timeout--)
+ ;
+
+ if (timeout == 0)
+ return -1;
+
+ return 0;
+}
+
+static int wait_for_i2c_req_done(void)
+{
+ int timeout = 10000;
+
+ /* Set an interrupt to XP70 */
+ writel(I2C_MBOX_BIT, PRCM_MBOX_CPU_SET);
+
+ /* wait for mailbox 5 (i2c) ack */
+ while (!(readl(PRCM_ARM_IT1_VAL) & I2C_MBOX_BIT) && timeout--)
+ ;
+
+ if (timeout == 0)
+ return -1;
+
+ return 0;
+}
+
+/**
+ * prcmu_i2c_read - PRCMU - 4500 communication using PRCMU I2C
+ * @reg: - db8500 register bank to be accessed
+ * @slave: - db8500 register to be accessed
+ * Returns: ACK_MB5 value containing the status
+ */
+int prcmu_i2c_read(u8 reg, u16 slave)
+{
+ uint8_t i2c_status;
+ uint8_t i2c_val;
+ int ret;
+
+ if (!prcmu_is_ready())
+ return -1;
+
+ dbg_printk("\nprcmu_4500_i2c_read:bank=%x;reg=%x;\n",
+ reg, slave);
+
+ ret = wait_for_i2c_mbx_rdy();
+ if (ret) {
+ printf("prcmu_i2c_read: mailbox became not ready\n");
+ return ret;
+ }
+
+ /* prepare the data for mailbox 5 */
+ writeb(PRCMU_I2C_READ(reg), PRCM_REQ_MB5_I2COPTYPE_REG);
+ writeb((1 << 3) | 0x0, PRCM_REQ_MB5_BIT_FIELDS);
+ writeb(slave, PRCM_REQ_MB5_I2CSLAVE);
+ writeb(0, PRCM_REQ_MB5_I2CVAL);
+
+ ret = wait_for_i2c_req_done();
+ if (ret) {
+ printf("prcmu_i2c_read: mailbox request timed out\n");
+ return ret;
+ }
+
+ /* retrieve values */
+ dbg_printk("ack-mb5:transfer status = %x\n",
+ readb(PRCM_ACK_MB5_STATUS));
+ dbg_printk("ack-mb5:reg bank = %x\n", readb(PRCM_ACK_MB5) >> 1);
+ dbg_printk("ack-mb5:slave_add = %x\n",
+ readb(PRCM_ACK_MB5_SLAVE));
+ dbg_printk("ack-mb5:reg_val = %d\n", readb(PRCM_ACK_MB5_VAL));
+
+ i2c_status = readb(PRCM_ACK_MB5_STATUS);
+ i2c_val = readb(PRCM_ACK_MB5_VAL);
+ /* clear mailbox 5 ack irq */
+ writel(I2C_MBOX_BIT, PRCM_ARM_IT1_CLEAR);
+
+ if (i2c_status == I2C_RD_OK)
+ return i2c_val;
+
+ printf("prcmu_i2c_read:read return status= %d\n", i2c_status);
+ return -1;
+}
+
+/**
+ * prcmu_i2c_write - PRCMU-db8500 communication using PRCMU I2C
+ * @reg: - db8500 register bank to be accessed
+ * @slave: - db800 register to be written to
+ * @reg_data: - the data to write
+ * Returns: ACK_MB5 value containing the status
+ */
+int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data)
+{
+ uint8_t i2c_status;
+ int ret;
+
+ if (!prcmu_is_ready())
+ return -1;
+
+ dbg_printk("\nprcmu_4500_i2c_write:bank=%x;reg=%x;\n",
+ reg, slave);
+
+ ret = wait_for_i2c_mbx_rdy();
+ if (ret) {
+ printf("prcmu_i2c_write: mailbox became not ready\n");
+ return ret;
+ }
+
+ /* prepare the data for mailbox 5 */
+ writeb(PRCMU_I2C_WRITE(reg), PRCM_REQ_MB5_I2COPTYPE_REG);
+ writeb((1 << 3) | 0x0, PRCM_REQ_MB5_BIT_FIELDS);
+ writeb(slave, PRCM_REQ_MB5_I2CSLAVE);
+ writeb(reg_data, PRCM_REQ_MB5_I2CVAL);
+
+ ret = wait_for_i2c_req_done();
+ if (ret) {
+ printf("prcmu_i2c_write: mailbox request timed out\n");
+ return ret;
+ }
+
+ /* retrieve values */
+ dbg_printk("ack-mb5:transfer status = %x\n",
+ readb(PRCM_ACK_MB5_STATUS));
+ dbg_printk("ack-mb5:reg bank = %x\n", readb(PRCM_ACK_MB5) >> 1);
+ dbg_printk("ack-mb5:slave_add = %x\n",
+ readb(PRCM_ACK_MB5_SLAVE));
+ dbg_printk("ack-mb5:reg_val = %d\n", readb(PRCM_ACK_MB5_VAL));
+
+ i2c_status = readb(PRCM_ACK_MB5_STATUS);
+ dbg_printk("\ni2c_status = %x\n", i2c_status);
+ /* clear mailbox 5 ack irq */
+ writel(I2C_MBOX_BIT, PRCM_ARM_IT1_CLEAR);
+
+ if (i2c_status == I2C_WR_OK)
+ return 0;
+
+ printf("prcmu_i2c_write: i2c_status : 0x%x\n", i2c_status);
+ return -1;
+}
+
+static void prcmu_enable(u32 *reg)
+{
+ writel(readl(reg) | (1 << 8), reg);
+}
+
+void db8500_prcmu_init(void)
+{
+ /* Enable timers */
+ writel(1 << 17, PRCM_TCR);
+
+ prcmu_enable((u32 *)PRCM_PER1CLK_MGT_REG);
+ prcmu_enable((u32 *)PRCM_PER2CLK_MGT_REG);
+ prcmu_enable((u32 *)PRCM_PER3CLK_MGT_REG);
+ /* PER4CLK does not exist */
+ prcmu_enable((u32 *)PRCM_PER5CLK_MGT_REG);
+ prcmu_enable((u32 *)PRCM_PER6CLK_MGT_REG);
+ /* Only exists in ED but is always ok to write to */
+ prcmu_enable((u32 *)PRCM_PER7CLK_MGT_REG);
+
+ prcmu_enable((u32 *)PRCM_UARTCLK_MGT_REG);
+ prcmu_enable((u32 *)PRCM_I2CCLK_MGT_REG);
+
+ prcmu_enable((u32 *)PRCM_SDMMCCLK_MGT_REG);
+
+ /* Clean up the mailbox interrupts after pre-u-boot code. */
+ writel(I2C_MBOX_BIT, PRCM_ARM_IT1_CLEAR);
+}
diff --git a/arch/arm/include/asm/arch-u8500/ab8500.h b/arch/arm/include/asm/arch-u8500/ab8500.h
new file mode 100644
index 000000000..5db047979
--- /dev/null
+++ b/arch/arm/include/asm/arch-u8500/ab8500.h
@@ -0,0 +1,510 @@
+/*
+ * Copyright (C) ST-Ericsson 2009.
+ *
+ * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ * Licensed under GPLv2.
+ */
+#ifndef _AB8500_H
+#define _AB8500_H
+
+/*
+ * AB8500 bank addresses
+ */
+#define AB8500_SYS_CTRL1_BLOCK 0x1
+#define AB8500_SYS_CTRL2_BLOCK 0x2
+#define AB8500_REGU_CTRL1 0x3
+#define AB8500_REGU_CTRL2 0x4
+#define AB8500_USB 0x5
+#define AB8500_TVOUT 0x6
+#define AB8500_DBI 0x7
+#define AB8500_ECI_AV_ACC 0x8
+#define AB8500_RESERVED 0x9
+#define STw4550_GPADC 0xA
+#define AB8500_GPADC 0xA
+#define AB8500_CHARGER 0xB
+#define AB8500_GAS_GAUGE 0xC
+#define AB8500_AUDIO 0xD
+#define AB8500_INTERRUPT 0xE
+#define AB8500_RTC 0xF
+#define AB8500_MISC 0x10
+#define AB8500_DEBUG 0x12
+#define AB8500_PROD_TEST 0x13
+#define AB8500_OTP_EMUL 0x15
+
+/*
+ * System control 1 register offsets.
+ * Bank = 0x01
+ */
+#define AB8500_TURNON_STAT_REG 0x0100
+#define AB8500_RESET_STAT_REG 0x0101
+#define AB8500_PONKEY1_PRESS_STAT_REG 0x0102
+
+#define AB8500_FSM_STAT1_REG 0x0140
+#define AB8500_FSM_STAT2_REG 0x0141
+#define AB8500_SYSCLK_REQ_STAT_REG 0x0142
+#define AB8500_USB_STAT1_REG 0x0143
+#define AB8500_USB_STAT2_REG 0x0144
+#define AB8500_STATUS_SPARE1_REG 0x0145
+#define AB8500_STATUS_SPARE2_REG 0x0146
+
+#define AB8500_CTRL1_REG 0x0180
+#define AB8500_CTRL2_REG 0x0181
+
+/*
+ * System control 2 register offsets.
+ * bank = 0x02
+ */
+#define AB8500_CTRL3_REG 0x0200
+#define AB8500_CTRL3_RST_DENC_MASK 0x4
+#define AB8500_CTRL3_RST_DENC_SHIFT 2
+#define AB8500_CTRL3_RST_AUD_MASK 0x2
+#define AB8500_CTRL3_RST_AUD_SHIFT 1
+#define AB8500_MAIN_WDOG_CTRL_REG 0x0201
+#define AB8500_MAIN_WDOG_TIMER_REG 0x0202
+#define AB8500_LOW_BAT_REG 0x0203
+#define AB8500_BATT_OK_REG 0x0204
+#define AB8500_SYSCLK_TIMER_REG 0x0205
+#define AB8500_SMPSCLK_CTRL_REG 0x0206
+#define AB8500_SMPSCLK_SEL1_REG 0x0207
+#define AB8500_SMPSCLK_SEL2_REG 0x0208
+#define AB8500_SMPSCLK_SEL3_REG 0x0209
+#define AB8500_SYSULPCLK_CONF_REG 0x020A
+#define AB8500_SYSULPCLK_CTRL1_REG 0x020B
+#define AB8500_SYSCLK_CTRL_REG 0x020C
+#define AB8500_SYSCLK_REQ1_VALID_REG 0x020D
+#define AB8500_SYSCLK_REQ_VALID_REG 0x020E
+#define AB8500_SYSCTRL_SPARE_REG 0x020F
+#define AB8500_PAD_CONF_REG 0x0210
+
+/*
+ * Regu control1 register offsets (SPI)
+ * Bank = 0x03
+ */
+#define AB8500_REGU_SERIAL_CTRL1_REG 0x0300
+#define AB8500_REGU_SERIAL_CTRL2_REG 0x0301
+#define AB8500_REGU_SERIAL_CTRL3_REG 0x0302
+#define AB8500_REGU_REQ_CTRL1_REG 0x0303
+#define AB8500_REGU_REQ_CTRL2_REG 0x0304
+#define AB8500_REGU_REQ_CTRL3_REG 0x0305
+#define AB8500_REGU_REQ_CTRL4_REG 0x0306
+#define AB8500_REGU_SYSCLK_REQ1HP_VALID1_REG 0x0307
+#define AB8500_REGU_SYSCLK_REQ1HP_VALID2_REG 0x0308
+#define AB8500_REGU_HWHPREQ1_VALID1_REG 0x0309
+#define AB8500_REGU_HWHPREQ1_VALID2_REG 0x030A
+#define AB8500_REGU_HWHPREQ2_VALID1_REG 0x030B
+#define AB8500_REGU_HWHPREQ2_VALID2_REG 0x030C
+#define AB8500_REGU_SWHPREQ_VALID1_REG 0x030D
+#define AB8500_REGU_SWHPREQ_VALID2_REG 0x030E
+
+#define AB8500_REGU_SYSCLK_REQ1_VALID_REG 0x030F /* only for ED*/
+#define AB8500_REGU_SYSCLK_REQ2_VALID_REG 0x0310 /*only for ED*/
+
+#define AB8500_REGU_MISC1_REG 0x0380
+#define AB8500_REGU_OTGSUPPLY_CTRL_REG 0x0381
+#define AB8500_REGU_VUSB_CTRL_REG 0x0382 /* see reg manaul*/
+#define AB8500_REGU_VAUDIO_SUPPLY_REG 0x0383
+#define AB8500_REGU_CTRL1_SPARE_REG 0x0384
+
+ /*
+ * Regu control2 register offsets (SPI/APE I2C)
+ * Bank = 0x04
+ */
+#define AB8500_REGU_ARM_REGU1_REG 0x0400
+#define AB8500_REGU_ARM_REGU2_REG 0x0401
+#define AB8500_REGU_VAPE_REGU_REG 0x0402
+#define AB8500_REGU_VSMPS1_REGU_REG 0x0403
+#define AB8500_REGU_VSMPS2_REGU_REG 0x0404
+#define AB8500_REGU_VSMPS3_REGU_REG 0x0405
+#define AB8500_REGU_VPLLVANA_REGU_REG 0x0406
+#define AB8500_REGU_VREF_DDR_REG 0x0407
+#define AB8500_REGU_EXTSUPPLY_REGU_REG 0x0408
+#define AB8500_REGU_VAUX12_REGU_REG 0x0409
+#define AB8500_REGU_VAUX12_REGU_VAUX1_MASK 0x3
+#define AB8500_REGU_VAUX12_REGU_VAUX1_SHIFT 0
+#define AB8500_REGU_VAUX12_REGU_VAUX1_FORCE_HP 0x1
+#define AB8500_REGU_VRF1VAUX3_REGU_REG 0x040A
+#define AB8500_REGU_VARM_SEL1_REG 0x040B
+#define AB8500_REGU_VARM_SEL2_REG 0x040C
+#define AB8500_REGU_VARM_SEL3_REG 0x040D
+#define AB8500_REGU_VAPE_SEL1_REG 0x040E
+#define AB8500_REGU_VAPE_SEL2_REG 0x040F
+#define AB8500_REGU_VAPE_SEL3_REG 0x0410
+#define AB8500_REGU_VBB_SEL2_REG 0x0412
+#define AB8500_REGU_VSMPS1_SEL1_REG 0x0413
+#define AB8500_REGU_VSMPS1_SEL2_REG 0x0414
+#define AB8500_REGU_VSMPS1_SEL3_REG 0x0415
+#define AB8500_REGU_VSMPS2_SEL1_REG 0x0417
+#define AB8500_REGU_VSMPS2_SEL2_REG 0x0418
+#define AB8500_REGU_VSMPS2_SEL3_REG 0x0419
+#define AB8500_REGU_VSMPS3_SEL1_REG 0x041B
+#define AB8500_REGU_VSMPS3_SEL2_REG 0x041C
+#define AB8500_REGU_VSMPS3_SEL3_REG 0x041D
+#define AB8500_REGU_VAUX1_SEL_REG 0x041F
+#define AB8500_REGU_VAUX1_SEL_MASK 0xf
+#define AB8500_REGU_VAUX1_SEL_SHIFT 0
+#define AB8500_REGU_VAUX1_SEL_1_5V 0x4
+#define AB8500_REGU_VAUX1_SEL_2_5V 0x8
+#define AB8500_REGU_VAUX2_SEL_REG 0x0420
+#define AB8500_REGU_VRF1VAUX3_SEL_REG 0x0421
+#define AB8500_REGU_CTRL2_SPARE_REG 0x0422
+
+/*
+ * Regu control2 Vmod register offsets
+ */
+#define AB8500_REGU_VMOD_REGU_REG 0x0440
+#define AB8500_REGU_VMOD_SEL1_REG 0x0441
+#define AB8500_REGU_VMOD_SEL2_REG 0x0442
+#define AB8500_REGU_CTRL_DISCH_REG 0x0443
+#define AB8500_REGU_CTRL_DISCH2_REG 0x0444
+
+/*
+ * Sim control register offsets
+ * Bank:0x4
+ */
+#define AB8500_SIM_REG1_SGR1L_REG 0x0480
+#define AB8500_SIM_REG1_SGR1U_REG 0x0481
+#define AB8500_SIM_REG2_SCR1L_REG 0x0482
+#define AB8500_SIM_REG2_SCR1U_REG 0x0483
+#define AB8500_SIM_REG3_SCTRLRL_REG 0x0484
+#define AB8500_SIM_REG3_SCTRLRU_REG 0x0485
+#define AB8500_SIM_ISOUICCINT_SRC_REG 0x0486
+#define AB8500_SIM_ISOUICCINT_LATCH_REG 0x0487
+#define AB8500_SIM_ISOUICCINT_MASK_REG 0x0488
+#define AB8500_SIM_REG4_USBUICC_REG 0x0489
+#define AB8500_SIM_SDELAYSEL_REG 0x048A
+#define AB8500_SIM_USBUICC_CTRL 0x048B /* bit 3 only for ED */
+
+/*
+ * USB/ULPI register offsets
+ * Bank : 0x5
+ */
+#define AB8500_USB_LINE_STAT_REG 0x0580
+#define AB8500_USB_LINE_CTRL1_REG 0x0581
+#define AB8500_USB_LINE_CTRL2_REG 0x0582
+#define AB8500_USB_LINE_CTRL3_REG 0x0583
+#define AB8500_USB_LINE_CTRL4_REG 0x0584
+#define AB8500_USB_LINE_CTRL5_REG 0x0585
+#define AB8500_USB_OTG_CTRL_REG 0x0587
+#define AB8500_USB_OTG_STAT_REG 0x0588
+#define AB8500_USB_OTG_STAT_REG 0x0588
+#define AB8500_USB_CTRL_SPARE_REG 0x0589
+#define AB8500_USB_PHY_CTRL_REG 0x058A /*only in Cut1.0*/
+
+/*
+ * TVOUT / CTRL register offsets
+ * Bank : 0x06
+ */
+#define AB8500_DENC_CONF0_REG 0x0600
+#define AB8500_DENC_CONF1_REG 0x0601
+#define AB8500_DENC_CONF2_REG 0x0602
+#define AB8500_DENC_CONF3_REG 0x0603
+#define AB8500_DENC_CONF4_REG 0x0604
+#define AB8500_DENC_CONF5_REG 0x0605
+#define AB8500_DENC_CONF6_REG 0x0606
+#define AB8500_DENC_CONF6_SOFT_RST_MASK 0x80
+#define AB8500_DENC_CONF6_SOFT_RST_SHIFT 7
+#define AB8500_DENC_CONF6_SOFT_RST_OFF 0x0
+#define AB8500_DENC_CONF6_SOFT_RST_ON 0x1
+#define AB8500_DENC_CONF7_REG 0x0607
+#define AB8500_DENC_CONF8_REG 0x0608
+#define AB8500_TVOUT_CTRL_REG 0x0680
+#define AB8500_TVOUT_CTRL2_REG 0x0681
+/*
+ * DBI register offsets
+ * Bank : 0x07
+ */
+#define AB8500_DBI_REG1_REG 0x0700
+#define AB8500_DBI_REG2_REG 0x0701
+/*
+ * ECI regsiter offsets
+ * Bank : 0x08
+ */
+#define AB8500_ECI_CTRL_REG 0x0800
+#define AB8500_ECI_HOOKLEVEL_REG 0x0801
+#define AB8500_ECI_DATAOUT_REG 0x0802
+#define AB8500_ECI_DATAIN_REG 0x0803
+/*
+ * AV Connector register offsets
+ * Bank : 0x08
+ */
+#define AB8500_AV_CONN_REG 0x0840
+/*
+ * Accessory detection register offsets
+ * Bank : 0x08
+ */
+#define AB8500_ACC_DET_DB1_REG 0x0880
+#define AB8500_ACC_DET_DB2_REG 0x0881
+/*
+ * GPADC register offsets
+ * Bank : 0x0A
+ */
+#define AB8500_GPADC_CTRL1_REG 0x0A00
+#define AB8500_GPADC_CTRL2_REG 0x0A01
+#define AB8500_GPADC_CTRL3_REG 0x0A02
+#define AB8500_GPADC_AUTO_TIMER_REG 0x0A03
+#define AB8500_GPADC_STAT_REG 0x0A04
+#define AB8500_GPADC_MANDATAL_REG 0x0A05
+#define AB8500_GPADC_MANDATAH_REG 0x0A06
+#define AB8500_GPADC_AUTODATAL_REG 0x0A07
+#define AB8500_GPADC_AUTODATAH_REG 0x0A08
+#define AB8500_GPADC_MUX_CTRL_REG 0x0A09
+/*
+ * Charger / status register offfsets
+ * Bank : 0x0B
+ */
+#define AB8500_CH_STATUS1_REG 0x0B00
+#define AB8500_CH_STATUS2_REG 0x0B01
+#define AB8500_CH_USBCH_STAT1_REG 0x0B02
+#define AB8500_CH_USBCH_STAT2_REG 0x0B03
+#define AB8500_CH_FSM_STAT_REG 0x0B04
+#define AB8500_CH_STAT_REG 0x0B05
+/*
+ * Charger / control register offfsets
+ * Bank : 0x0B
+ */
+#define AB8500_CH_VOLT_LVL_REG 0x0B40
+#define AB8500_CH_VOLT_LVL_MAX_REG 0x0B41 /*Only in Cut1.0*/
+#define AB8500_CH_OPT_CRNTLVL_REG 0x0B42 /*Only in Cut1.0*/
+#define AB8500_CH_OPT_CRNTLVL_MAX_REG 0x0B43 /*Only in Cut1.0*/
+#define AB8500_CH_WD_TIMER_REG 0x0B44 /*Only in Cut1.0*/
+#define AB8500_CH_WD_CTRL_REG 0x0B45 /*Only in Cut1.0*/
+#define AB8500_CHARG_WD_CTRL 0x0B51
+#define AB8500_LED_INDICATOR_PWM_CTRL 0x0B53
+#define AB8500_LED_INDICATOR_PWM_DUTY 0x0B54
+#define AB8500_BATT_OVV 0x0B55
+/*
+ * Charger / main control register offfsets
+ * Bank : 0x0B
+ */
+#define AB8500_MCH_CTRL1 0x0B80
+#define AB8500_MCH_CTRL2 0x0B81
+#define AB8500_MCH_IPT_CURLVL_REG 0x0B82
+#define AB8500_CH_WD_REG 0x0B83
+/*
+ * Charger / USB control register offsets
+ * Bank : 0x0B
+ */
+#define AB8500_USBCH_CTRL1_REG 0x0BC0
+#define AB8500_USBCH_CTRL2_REG 0x0BC1
+#define AB8500_USBCH_IPT_CRNTLVL_REG 0x0BC2
+/*
+ * Gas Gauge register offsets
+ * Bank : 0x0C
+ */
+#define AB8500_GASG_CC_CTRL_REG 0x0C00
+#define AB8500_GASG_CC_ACCU1_REG 0x0C01
+#define AB8500_GASG_CC_ACCU2_REG 0x0C02
+#define AB8500_GASG_CC_ACCU3_REG 0x0C03
+#define AB8500_GASG_CC_ACCU4_REG 0x0C04
+#define AB8500_GASG_CC_SMPL_CNTRL_REG 0x0C05
+#define AB8500_GASG_CC_SMPL_CNTRH_REG 0x0C06
+#define AB8500_GASG_CC_SMPL_CNVL_REG 0x0C07
+#define AB8500_GASG_CC_SMPL_CNVH_REG 0x0C08
+#define AB8500_GASG_CC_CNTR_AVGOFF_REG 0x0C09
+#define AB8500_GASG_CC_OFFSET_REG 0x0C0A
+#define AB8500_GASG_CC_NCOV_ACCU 0x0C10
+#define AB8500_GASG_CC_NCOV_ACCU_CTRL 0x0C11
+#define AB8500_GASG_CC_NCOV_ACCU_LOW 0x0C12
+#define AB8500_GASG_CC_NCOV_ACCU_MED 0x0C13
+#define AB8500_GASG_CC_NCOV_ACCU_HIGH 0x0C14
+
+
+
+/*
+ * Audio
+ * Bank : 0x0D
+ * Should be part of Audio codec driver
+ */
+#define AB8500_AUDIO_POWER_UP 0x0D00
+#define AB8500_AUDIO_ANA_CONF4 0x0D08
+#define AB8500_AUDIO_DA_PATH_CONF 0x0D09
+#define AB8500_AUDIO_PWM_GEN_CONF1 0x0D0F
+#define AB8500_AUDIO_PWM_GEN_CONF2 0x0D10
+#define AB8500_AUDIO_PWM_GEN_CONF3 0x0D11
+#define AB8500_AUDIO_PWM_GEN_CONF4 0x0D12
+#define AB8500_AUDIO_PWM_GEN_CONF5 0x0D13
+
+/*
+ * Interrupt register offsets
+ * Bank : 0x0E
+ */
+#define AB8500_IT_SOURCE1_REG 0x0E00
+#define AB8500_IT_SOURCE2_REG 0x0E01
+#define AB8500_IT_SOURCE3_REG 0x0E02
+#define AB8500_IT_SOURCE4_REG 0x0E03
+#define AB8500_IT_SOURCE5_REG 0x0E04
+#define AB8500_IT_SOURCE6_REG 0x0E05
+
+/* available only in 1.0 */
+#define AB8500_IT_SOURCE7_REG 0x0E06
+#define AB8500_IT_SOURCE8_REG 0x0E07
+#define AB8500_IT_SOURCE19_REG 0x0E12
+
+#define AB8500_IT_SOURCE20_REG 0x0E13
+#define AB8500_IT_SOURCE21_REG 0x0E14
+#define AB8500_IT_SOURCE22_REG 0x0E15
+#define AB8500_IT_SOURCE23_REG 0x0E16
+#define AB8500_IT_SOURCE24_REG 0x0E17
+
+/*
+ * latch registers
+ */
+#define AB8500_IT_LATCH1_REG 0x0E20
+#define AB8500_IT_LATCH2_REG 0x0E21
+#define AB8500_IT_LATCH3_REG 0x0E22
+#define AB8500_IT_LATCH4_REG 0x0E23
+#define AB8500_IT_LATCH5_REG 0x0E24
+#define AB8500_IT_LATCH6_REG 0x0E25
+
+/* available only in 1.0 */
+#define AB8500_IT_LATCH7_REG 0x0E26
+#define AB8500_IT_LATCH8_REG 0x0E27
+#define AB8500_IT_LATCH9_REG 0x0E28
+#define AB8500_IT_LATCH10_REG 0x0E29
+#define AB8500_IT_LATCH19_REG 0x0E32
+
+#define AB8500_IT_LATCH20_REG 0x0E33
+#define AB8500_IT_LATCH21_REG 0x0E34
+#define AB8500_IT_LATCH22_REG 0x0E35
+#define AB8500_IT_LATCH23_REG 0x0E36
+#define AB8500_IT_LATCH24_REG 0x0E37
+
+/*
+ * mask registers
+ */
+
+#define AB8500_IT_MASK1_REG 0x0E40
+#define AB8500_IT_MASK2_REG 0x0E41
+#define AB8500_IT_MASK3_REG 0x0E42
+#define AB8500_IT_MASK4_REG 0x0E43
+#define AB8500_IT_MASK5_REG 0x0E44
+#define AB8500_IT_MASK6_REG 0x0E45
+
+
+/* available only in 1.0 */
+#define AB8500_IT_MASK7_REG 0x0E46
+#define AB8500_IT_MASK8_REG 0x0E47
+#define AB8500_IT_MASK9_REG 0x0E48
+#define AB8500_IT_MASK10_REG 0x0E49
+#define AB8500_IT_MASK11_REG 0x0E4A
+#define AB8500_IT_MASK12_REG 0x0E4B
+#define AB8500_IT_MASK13_REG 0x0E4C
+#define AB8500_IT_MASK14_REG 0x0E4D
+#define AB8500_IT_MASK15_REG 0x0E4E
+#define AB8500_IT_MASK16_REG 0x0E4F
+#define AB8500_IT_MASK17_REG 0x0E50
+#define AB8500_IT_MASK18_REG 0x0E51
+#define AB8500_IT_MASK19_REG 0x0E52
+
+#define AB8500_IT_MASK20_REG 0x0E53
+#define AB8500_IT_MASK21_REG 0x0E54
+#define AB8500_IT_MASK22_REG 0x0E55
+#define AB8500_IT_MASK23_REG 0x0E56
+#define AB8500_IT_MASK24_REG 0x0E57
+
+/*
+ * RTC bank register offsets
+ * Bank : 0xF
+ */
+#define AB8500_RTC_SWITCHOFF_STAT_REG 0x0F00
+#define AB8500_RTC_CC_CONF_REG 0x0F01
+#define AB8500_RTC_READ_REQ_REG 0x0F02
+#define AB8500_RTC_WATCH_TSECMID_REG 0x0F03
+#define AB8500_RTC_WATCH_TSECHI_REG 0x0F04
+#define AB8500_RTC_WATCH_TMIN_LOW_REG 0x0F05
+#define AB8500_RTC_WATCH_TMIN_MID_REG 0x0F06
+#define AB8500_RTC_WATCH_TMIN_HI_REG 0x0F07
+#define AB8500_RTC_ALRM_MIN_LOW_REG 0x0F08
+#define AB8500_RTC_ALRM_MIN_MID_REG 0x0F09
+#define AB8500_RTC_ALRM_MIN_HI_REG 0x0F0A
+#define AB8500_RTC_STAT_REG 0x0F0B
+#define AB8500_RTC_BKUP_CHG_REG 0x0F0C
+#define AB8500_RTC_FORCE_BKUP_REG 0x0F0D
+#define AB8500_RTC_CALIB_REG 0x0F0E
+#define AB8500_RTC_SWITCH_STAT_REG 0x0F0F
+
+/*
+ * Misc block GPIO register offsets - Not for ED
+ * Bank : 0x10
+ */
+/* available only in 1.0 */
+#define AB8500_GPIO_SEL1_REG 0x01000
+#define AB8500_GPIO_SEL2_REG 0x01001
+#define AB8500_GPIO_SEL3_REG 0x01002
+#define AB8500_GPIO_SEL4_REG 0x01003
+#define AB8500_GPIO_SEL5_REG 0x01004
+#define AB8500_GPIO_SEL6_REG 0x01005
+#define AB8500_GPIO_DIR1_REG 0x01010
+#define AB8500_GPIO_DIR2_REG 0x01011
+#define AB8500_GPIO_DIR3_REG 0x01012
+#define AB8500_GPIO_DIR4_REG 0x01013
+#define AB8500_GPIO_DIR5_REG 0x01014
+#define AB8500_GPIO_DIR6_REG 0x01015
+
+#define AB8500_GPIO_OUT1_REG 0x01020
+#define AB8500_GPIO_OUT2_REG 0x01021
+#define AB8500_GPIO_OUT3_REG 0x01022
+#define AB8500_GPIO_OUT4_REG 0x01023
+#define AB8500_GPIO_OUT5_REG 0x01024
+#define AB8500_GPIO_OUT6_REG 0x01025
+
+#define AB8500_GPIO_PUD1_REG 0x01030
+#define AB8500_GPIO_PUD2_REG 0x01031
+#define AB8500_GPIO_PUD3_REG 0x01032
+#define AB8500_GPIO_PUD4_REG 0x01033
+#define AB8500_GPIO_PUD5_REG 0x01034
+#define AB8500_GPIO_PUD6_REG 0x01035
+
+#define AB8500_GPIO_IN1_REG 0x01040
+#define AB8500_GPIO_IN2_REG 0x01041
+#define AB8500_GPIO_IN3_REG 0x01042
+#define AB8500_GPIO_IN4_REG 0x01043
+#define AB8500_GPIO_IN5_REG 0x01044
+#define AB8500_GPIO_IN6_REG 0x01045
+#define AB8500_GPIO_ALT_FUNC 0x01050
+
+/*
+ * PWM Out generators
+ * Bank: 0x10
+ */
+#define AB8500_PWM_OUT_CTRL1_REG 0x1060
+#define AB8500_PWM_OUT_CTRL2_REG 0x1061
+#define AB8500_PWM_OUT_CTRL3_REG 0x1062
+#define AB8500_PWM_OUT_CTRL4_REG 0x1063
+#define AB8500_PWM_OUT_CTRL5_REG 0x1064
+#define AB8500_PWM_OUT_CTRL6_REG 0x1065
+#define AB8500_PWM_OUT_CTRL7_REG 0x1066
+
+#define AB8500_I2C_PAD_CTRL_REG 0x1067
+#define AB8500_REV_REG 0x1080
+
+/*
+ * Misc, Debug Test Configuration register
+ * Bank : 0x11
+ */
+#define AB8500_DEBUG_TESTMODE_REG 0x01100
+
+/* only in 1.0 */
+#define AB8500_I2C_TRIG1_ADR_REG 0x1101
+#define AB8500_I2C_TRIG1_ID_REG 0x1102
+#define AB8500_I2C_TRIG2_ADR_REG 0x1103
+#define AB8500_I2C_TRIG3_ID_REG 0x1104
+#define AB8500_I2C_NOACCESS_SUP_REG 0x1105
+
+/* Offsets in TurnOnstatus register
+ */
+
+#define AB8500_MAX_INT 192
+#define AB8500_MAX_FUTURE_USE 105
+
+#define AB8500_MAX_INT_SOURCE 11
+#define AB8500_MAX_INT_LATCH 13
+#define AB8500_MAX_INT_MASK 21
+
+#define ab8500_read prcmu_i2c_read
+#define ab8500_write prcmu_i2c_write
+
+extern int prcmu_i2c_read(u8 reg, u16 slave);
+extern int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data);
+
+#endif /* AB8500_H_ */
diff --git a/arch/arm/include/asm/arch-u8500/clock.h b/arch/arm/include/asm/arch-u8500/clock.h
index b00ab0d21..f9deba524 100644
--- a/arch/arm/include/asm/arch-u8500/clock.h
+++ b/arch/arm/include/asm/arch-u8500/clock.h
@@ -23,50 +23,13 @@
#ifndef __ASM_ARCH_CLOCK
#define __ASM_ARCH_CLOCK
-struct prcmu {
- unsigned int armclkfix_mgt;
- unsigned int armclk_mgt;
- unsigned int svammdspclk_mgt;
- unsigned int siammdspclk_mgt;
- unsigned int reserved;
- unsigned int sgaclk_mgt;
- unsigned int uartclk_mgt;
- unsigned int msp02clk_mgt;
- unsigned int i2cclk_mgt;
- unsigned int sdmmcclk_mgt;
- unsigned int slimclk_mgt;
- unsigned int per1clk_mgt;
- unsigned int per2clk_mgt;
- unsigned int per3clk_mgt;
- unsigned int per5clk_mgt;
- unsigned int per6clk_mgt;
- unsigned int per7clk_mgt;
- unsigned int lcdclk_mgt;
- unsigned int reserved1;
- unsigned int bmlclk_mgt;
- unsigned int hsitxclk_mgt;
- unsigned int hsirxclk_mgt;
- unsigned int hdmiclk_mgt;
- unsigned int apeatclk_mgt;
- unsigned int apetraceclk_mgt;
- unsigned int mcdeclk_mgt;
- unsigned int ipi2cclk_mgt;
- unsigned int dsialtclk_mgt;
- unsigned int spare2clk_mgt;
- unsigned int dmaclk_mgt;
- unsigned int b2r2clk_mgt;
- unsigned int tvclk_mgt;
- unsigned int unused[82];
- unsigned int tcr;
- unsigned int unused1[23];
- unsigned int ape_softrst;
-};
+/* Enable all clocks u-boot needs in db8500 SoC platform */
+void db8500_clocks_init(void);
-extern void u8500_clock_enable(int periph, int kern, int cluster);
+/* Legacy function to allow drivers to enable their clock */
+void u8500_clock_enable(int periph, int cluster, int kern);
-static inline void u8500_prcmu_enable(unsigned int *reg)
-{
- writel(readl(reg) | (1 << 8), reg);
-}
+/* Function to get the clock speed of ARM cpu */
+u32 db8500_clock_cpu_khz(void);
#endif /* __ASM_ARCH_CLOCK */
diff --git a/arch/arm/include/asm/arch-u8500/common.h b/arch/arm/include/asm/arch-u8500/common.h
new file mode 100644
index 000000000..42fb8928f
--- /dev/null
+++ b/arch/arm/include/asm/arch-u8500/common.h
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2009
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _DB8500_COMMON_H_
+#define _DB8500_COMMON_H_
+#include <common.h>
+
+#define PASS (1)
+#define FAIL (0)
+
+#define IO(addr) (*((u32*) (addr)))
+#define HIO(addr) (*((u16*) (addr)))
+#define BIO(addr) (*((u8*) (addr)))
+
+/*
+ * macro to get at IO space
+ */
+#define IO_ADDRESS(x) (x)
+
+#define REG_WRITE_BITS(reg,val,mask,sb) (writel(((readl(reg) & ~(mask)) | (((val)<<(sb)) & (mask))), reg))
+
+#define nmdk_error(format, arg...) printf(": " format "\n" , ## arg)
+
+#if !defined(FALSE) && !defined(TRUE)
+typedef enum {FALSE, TRUE} t_bool;
+#else /* FALSE & TRUE already defined */
+typedef enum {BOOL_FALSE, BOOL_TRUE} t_bool;
+#endif /* !defined(FALSE) && !defined(TRUE) */
+
+/*-----------------------------------------------------------------------------
+ * Bit mask definition
+ *---------------------------------------------------------------------------*/
+#define MASK_NULL8 0x00
+#define MASK_NULL16 0x0000
+#define MASK_NULL32 0x00000000
+#define MASK_ALL8 0xFF
+#define MASK_ALL16 0xFFFF
+#define MASK_ALL32 0xFFFFFFFF
+
+#define MASK_BIT0 (1UL<<0)
+#define MASK_BIT1 (1UL<<1)
+#define MASK_BIT2 (1UL<<2)
+#define MASK_BIT3 (1UL<<3)
+#define MASK_BIT4 (1UL<<4)
+#define MASK_BIT5 (1UL<<5)
+#define MASK_BIT6 (1UL<<6)
+#define MASK_BIT7 (1UL<<7)
+#define MASK_BIT8 (1UL<<8)
+#define MASK_BIT9 (1UL<<9)
+#define MASK_BIT10 (1UL<<10)
+#define MASK_BIT11 (1UL<<11)
+#define MASK_BIT12 (1UL<<12)
+#define MASK_BIT13 (1UL<<13)
+#define MASK_BIT14 (1UL<<14)
+#define MASK_BIT15 (1UL<<15)
+#define MASK_BIT16 (1UL<<16)
+#define MASK_BIT17 (1UL<<17)
+#define MASK_BIT18 (1UL<<18)
+#define MASK_BIT19 (1UL<<19)
+#define MASK_BIT20 (1UL<<20)
+#define MASK_BIT21 (1UL<<21)
+#define MASK_BIT22 (1UL<<22)
+#define MASK_BIT23 (1UL<<23)
+#define MASK_BIT24 (1UL<<24)
+#define MASK_BIT25 (1UL<<25)
+#define MASK_BIT26 (1UL<<26)
+#define MASK_BIT27 (1UL<<27)
+#define MASK_BIT28 (1UL<<28)
+#define MASK_BIT29 (1UL<<29)
+#define MASK_BIT30 (1UL<<30)
+#define MASK_BIT31 (1UL<<31)
+
+#define NOMADIK_INTERNAL_ERROR (-8)
+#define NOMADIK_NOT_CONFIGURED (-7)
+#define NOMADIK_REQUEST_PENDING (-6)
+#define NOMADIK_REQUEST_NOT_APPLICABLE (-5)
+#define NOMADIK_INVALID_PARAMETER (-4)
+#define NOMADIK_UNSUPPORTED_FEATURE (-3)
+#define NOMADIK_UNSUPPORTED_HW (-2)
+#define NOMADIK_ERROR (-1)
+#define NOMADIK_OK ( 0)
+#define NOMADIK_INTERNAL_EVENT ( 1)
+#define NOMADIK_REMAINING_PENDING_EVENTS ( 2)
+#define NOMADIK_REMAINING_FILTER_PENDING_EVENTS ( 3)
+#define NOMADIK_NO_MORE_PENDING_EVENT ( 4)
+#define NOMADIK_NO_MORE_FILTER_PENDING_EVENT ( 5)
+#define NOMADIK_NO_PENDING_EVENT_ERROR ( 7)
+
+
+#define NOMADIK_MAX_ERROR_VALUE (-65) /* HW specific error codes
+ * should start from this offset
+ */
+/*-----------------------------------------------------------------------------
+ * Bit setting or clearing
+ *---------------------------------------------------------------------------*/
+#define NOMADIK_SET_BITS(reg,mask) ((reg) |= (mask))
+#define NOMADIK_CLEAR_BITS(reg,mask) ((reg) &= ~(mask))
+#define NOMADIK_READ_BITS(reg,mask) ((reg) & (mask))
+#define NOMADIK_WRITE_BITS(reg,val,mask) ((reg) = (((reg) & ~(mask)) | ((val) & (mask))))
+#define NOMADIK_READ_REG(reg) (reg)
+#define NOMADIK_WRITE_REG(reg,val) ((reg) = (val))
+
+/*
+ * Definition of the different kind of addresses manipulated into a system with MMU
+ * (handle physical AND logical addresses)
+ */
+
+typedef u32 t_physical_address;
+typedef u32 t_logical_address;
+
+/*function prototypes*/
+int board_early_access(block_dev_desc_t *block_dev);
+#endif /* _DB8500_COMMON_H_ */
diff --git a/arch/arm/include/asm/arch-u8500/cpu.h b/arch/arm/include/asm/arch-u8500/cpu.h
new file mode 100644
index 000000000..9c61240dd
--- /dev/null
+++ b/arch/arm/include/asm/arch-u8500/cpu.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Joakim Axelsson <joakim.axelsson at stericsson.com>
+ * for ST-Ericsson
+ *
+ * Origin: Code split from board/st/u8500/u8500.c
+ *
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+#ifndef __DB8500_CPU_H__
+#define __DB8500_CPU_H__
+
+#include <config.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+
+#define CPUID_DB8500ED 0x410fc090
+#define CPUID_DB8500V1 0x411fc091
+#define CPUID_DB8500V2 0x412fc091
+
+#define ASICID_DB8500V11 0x008500A1
+
+/*
+ * Keep these CPU identity functions inline here because they are short
+ * and used by many. Will make for fast optimized compiled code.
+ */
+
+static inline unsigned int read_cpuid(void)
+{
+ unsigned int val;
+
+ /* Main ID register (MIDR) */
+ asm("mrc p15, 0, %0, c0, c0, 0"
+ : "=r" (val)
+ :
+ : "cc");
+
+ return val;
+}
+
+static inline int u8500_is_snowball(void)
+{
+ return 1;
+}
+
+#define HREF_PRINTF(fmt, args...) \
+ if (!u8500_is_snowball()) printf(fmt, ##args);
+
+static inline int u8500_is_earlydrop(void)
+{
+ return read_cpuid() == CPUID_DB8500ED;
+}
+
+static inline int cpu_is_u8500v1(void)
+{
+ return read_cpuid() == CPUID_DB8500V1;
+}
+
+static inline int cpu_is_u8500v2(void)
+{
+ return read_cpuid() == CPUID_DB8500V2;
+}
+
+static inline unsigned int read_asicid(void)
+{
+ unsigned int *address;
+
+ if (u8500_is_earlydrop() || cpu_is_u8500v1())
+ address = (void *) U8500_ASIC_ID_LOC_ED_V1;
+ else
+ address = (void *) U8500_ASIC_ID_LOC_V2;
+
+ return readl(address);
+}
+
+static inline int cpu_is_u8500v11(void)
+{
+ return read_asicid() == ASICID_DB8500V11;
+}
+
+
+#endif /* __DB8500_CPU_H__ */
+
diff --git a/arch/arm/include/asm/arch-u8500/hardware.h b/arch/arm/include/asm/arch-u8500/hardware.h
index 6bb95ec07..990c062fb 100644
--- a/arch/arm/include/asm/arch-u8500/hardware.h
+++ b/arch/arm/include/asm/arch-u8500/hardware.h
@@ -50,11 +50,13 @@
#define U8500_GPIO8_BASE (U8500_PER5_BASE + 0x1E000)
/* Per7 */
+#define U8500_MTU0_BASE_ED (U8500_PER7_BASE + 0xa000)
+#define U8500_MTU1_BASE_ED (U8500_PER7_BASE + 0xb000)
#define U8500_CLKRST7_BASE (U8500_PER7_BASE + 0xf000)
/* Per6 */
#define U8500_MTU0_BASE_V1 (U8500_PER6_BASE + 0x6000)
-#define U8500_MTU1_BASE_V1 (U8500_PER6_BASE + 0x7000)
+#define U8500_MTU1_BASE_v1 (U8500_PER6_BASE + 0x7000)
#define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000)
/* Per5 */
@@ -62,22 +64,29 @@
/* Per4 */
#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000)
-#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x0f000)
+#define U8500_PRCMU_TCDM_BASE_V1 (U8500_PER4_BASE + 0x0f000)
+#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000)
/* Per3 */
#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000)
#define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000)
/* Per2 */
+#define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000)
+#define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000)
+#define U8500_SPI0_BASE (U8500_PER2_BASE + 0xa000)
#define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000)
/* Per1 */
#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000)
#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000)
+#define U8500_SPI3_BASE (U8500_PER2_BASE + 0x9000)
#define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000)
-/* Last page of Boot ROM */
-#define U8500_BOOTROM_BASE 0x9001f000
-#define U8500_BOOTROM_ASIC_ID_OFFSET 0x0ff4
+#define U8500_BOOTROM_BASE 0x90000000
+#define U8500_ASIC_ID_LOC_ED_V1 (U8500_BOOTROM_BASE + 0x1FFF4)
+#define U8500_ASIC_ID_LOC_V2 (U8500_BOOTROM_BASE + 0x1DBF4)
+
+#define U8500_TWD_BASE 0xa0410600
#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/include/asm/arch-u8500/prcmu.h b/arch/arm/include/asm/arch-u8500/prcmu.h
new file mode 100644
index 000000000..f7709e2d7
--- /dev/null
+++ b/arch/arm/include/asm/arch-u8500/prcmu.h
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Joakim Axelsson <joakim.axelsson at stericsson.com>
+ * for ST-Ericsson
+ *
+ * Origin: Code split from board/st/u8500/u8500.c
+ *
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+#ifndef __PRCMU_H__
+#define __PRCMU_H__
+
+#include <asm/arch/hardware.h>
+
+/* Power, Reset, Clock Management Unit */
+/*
+ * SVA: Smart Video Accelerator
+ * SIA: Smart Imaging Accelerator
+ * SGA: Smart Graphic accelerator
+ * B2R2: Graphic blitter
+ */
+#define PRCMU_BASE U8500_PRCMU_BASE
+#define PRCM_ARMCLKFIX_MGT_REG (PRCMU_BASE + 0x000)
+#define PRCM_ACLK_MGT_REG (PRCMU_BASE + 0x004)
+#define PRCM_SVAMMDSPCLK_MGT_REG (PRCMU_BASE + 0x008)
+#define PRCM_SIAMMDSPCLK_MGT_REG (PRCMU_BASE + 0x00C)
+#define PRCM_SAAMMDSPCLK_MGT_REG (PRCMU_BASE + 0x010)
+#define PRCM_SGACLK_MGT_REG (PRCMU_BASE + 0x014)
+#define PRCM_UARTCLK_MGT_REG (PRCMU_BASE + 0x018)
+#define PRCM_MSPCLK_MGT_REG (PRCMU_BASE + 0x01C)
+#define PRCM_I2CCLK_MGT_REG (PRCMU_BASE + 0x020)
+#define PRCM_SDMMCCLK_MGT_REG (PRCMU_BASE + 0x024)
+#define PRCM_SLIMCLK_MGT_REG (PRCMU_BASE + 0x028)
+#define PRCM_PER1CLK_MGT_REG (PRCMU_BASE + 0x02C)
+#define PRCM_PER2CLK_MGT_REG (PRCMU_BASE + 0x030)
+#define PRCM_PER3CLK_MGT_REG (PRCMU_BASE + 0x034)
+#define PRCM_PER5CLK_MGT_REG (PRCMU_BASE + 0x038)
+#define PRCM_PER6CLK_MGT_REG (PRCMU_BASE + 0x03C)
+#define PRCM_PER7CLK_MGT_REG (PRCMU_BASE + 0x040)
+#define PRCM_DMACLK_MGT_REG (PRCMU_BASE + 0x074)
+#define PRCM_B2R2CLK_MGT_REG (PRCMU_BASE + 0x078)
+
+#define PRCM_PLLSOC0_FREQ_REG (PRCMU_BASE + 0x080)
+#define PRCM_PLLSOC1_FREQ_REG (PRCMU_BASE + 0x084)
+#define PRCM_PLLARM_FREQ_REG (PRCMU_BASE + 0x088)
+#define PRCM_PLLDDR_FREQ_REG (PRCMU_BASE + 0x08C)
+#define PRCM_ARM_CHGCLKREQ_REG (PRCMU_BASE + 0x114)
+
+#define PRCM_TCR (PRCMU_BASE + 0x1C8)
+
+/* Init PRCMU relatated things in db8500 SoC platform */
+void db8500_prcmu_init(void);
+
+#endif /* __PRCMU_H__ */
+
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-19 12:10:52 +0000