NAND: Fix cache and memory inconsistency issue

We load the secondary stage u-boot image from NAND to
system memory by nand_load, but we did not flush d-cache
to memory, nor invalidate i-cache before we jump to RAM.
When the system has cache enabled and the TLB/page attribute
of system memory is cacheable, it will cause issues.

- 83xx family is using the d-cache lock, so all of d-cache
  access is cache-inhibited. so you can't see the issue.
- 85xx family is using d-cache, i-cache enable, partial
  cache lock. you will see the issue.

This patch fixes the cache issue.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>

2 files changed, 10 insertions, 1 deletions

diff --git a/nand_spl/board/freescale/mpc8313erdb/Makefile b/nand_spl/board/freescale/mpc8313erdb/Makefile
index 3da1b1fff..1a8f6ff2c 100644
--- a/nand_spl/board/freescale/mpc8313erdb/Makefile
+++ b/nand_spl/board/freescale/mpc8313erdb/Makefile
@@ -34,7 +34,8 @@ AFLAGS	+= -DCONFIG_NAND_SPL
 CFLAGS	+= -DCONFIG_NAND_SPL
 
 SOBJS	= start.o ticks.o
-COBJS	= nand_boot_fsl_elbc.o $(BOARD).o sdram.o ns16550.o nand_init.o time.o
+COBJS	= nand_boot_fsl_elbc.o $(BOARD).o sdram.o ns16550.o nand_init.o \
+	  time.o cache.o
 
 SRCS	:= $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
@@ -79,6 +80,9 @@ $(obj)ns16550.c:
 $(obj)nand_init.c:
 	ln -sf $(SRCTREE)/cpu/mpc83xx/nand_init.c $(obj)nand_init.c
 
+$(obj)cache.c:
+	ln -sf $(SRCTREE)/lib_ppc/cache.c $(obj)cache.c
+
 $(obj)time.c:
 	ln -sf $(SRCTREE)/lib_ppc/time.c $(obj)time.c
 
diff --git a/nand_spl/nand_boot_fsl_elbc.c b/nand_spl/nand_boot_fsl_elbc.c
index 4a961ea7b..0d0c44e1e 100644
--- a/nand_spl/nand_boot_fsl_elbc.c
+++ b/nand_spl/nand_boot_fsl_elbc.c
@@ -143,6 +143,11 @@ void nand_boot(void)
 	 * Jump to U-Boot image
 	 */
 	puts("transfering control\n");
+	/*
+	 * Clean d-cache and invalidate i-cache, to
+	 * make sure that no stale data is executed.
+	 */
+	flush_cache(CONFIG_SYS_NAND_U_BOOT_DST, CONFIG_SYS_NAND_U_BOOT_SIZE);
 	uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
 	uboot();
 }