gth2: Remove this platform

After taking with the former maintainer, delete this platform.  The
patch is from the former maintainer.

Signed-off-by: Tom Rini <trini@ti.com>

1 files changed, 0 insertions, 222 deletions

diff --git a/include/configs/gth2.h b/include/configs/gth2.h
deleted file mode 100644
index 76e911a98..000000000
--- a/include/configs/gth2.h
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * (C) Copyright 2005
- * Thomas.Lange@corelatus.se
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file contains the configuration parameters for the gth2 board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_MIPS32		1  /* MIPS32 CPU core	*/
-#define CONFIG_GTH2		1
-#define CONFIG_SOC_AU1X00	1  /* alchemy series cpu */
-
-#define CONFIG_SOC_AU1000	1
-
-#define CONFIG_MISC_INIT_R	1
-
-#define CONFIG_ETHADDR		DE:AD:BE:EF:01:02    /* Ethernet address */
-
-#define CONFIG_BOOTDELAY	1	/* autoboot after 1 seconds	*/
-
-#define CONFIG_ENV_OVERWRITE 1 /* Allow change of ethernet address */
-
-#define CONFIG_BOOT_RETRY_TIME 5 /* Retry boot in 5 secs */
-
-#define CONFIG_RESET_TO_RETRY 1 /* If timeout waiting for command, perform a reset */
-
-#define CONFIG_BAUDRATE		115200
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }
-
-/* Only interrupt boot if space is pressed */
-/* If a long serial cable is connected but */
-/* other end is dead, garbage will be read */
-#define CONFIG_AUTOBOOT_KEYED	1
-#define CONFIG_AUTOBOOT_PROMPT	\
-	"Press space to abort autoboot in %d second\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR "d"
-#define CONFIG_AUTOBOOT_STOP_STR " "
-
-#define CONFIG_TIMESTAMP		/* Print image info with timestamp */
-#define CONFIG_BOOTARGS "panic=1"
-
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	"addmisc=setenv bootargs $(bootargs) "				\
-		"ethaddr=$(ethaddr) \0"					\
-	"netboot=bootp;run addmisc;bootm\0"				\
-		""
-
-/* Boot from Compact flash partition 2 as default */
-#define CONFIG_BOOTCOMMAND	"ide reset;disk 0x81000000 0:2;run addmisc;bootm"
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_DHCP
-
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_BEDBUG
-#undef CONFIG_CMD_ELF
-#undef CONFIG_CMD_FAT
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_MII
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_SAVEENV
-#undef CONFIG_CMD_SOURCE
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP				/* undef to save memory	     */
-#define CONFIG_SYS_PROMPT		"GTH2 # "	/* Monitor Command Prompt    */
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size   */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)  /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args*/
-
-#define CONFIG_SYS_MALLOC_LEN		128*1024
-
-#define CONFIG_SYS_BOOTPARAMS_LEN	128*1024
-
-#define CONFIG_SYS_MHZ			500
-
-#define CONFIG_SYS_MIPS_TIMER_FREQ	(CONFIG_SYS_MHZ * 1000000)
-
-#define CONFIG_SYS_HZ			1000
-
-#define CONFIG_SYS_SDRAM_BASE		0x80000000     /* Cached addr */
-
-#define CONFIG_SYS_LOAD_ADDR		0x81000000     /* default load address	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x80100000
-#define CONFIG_SYS_MEMTEST_END		0x83000000
-
-#define CONFIG_HW_WATCHDOG	1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
-
-#define PHYS_FLASH		0xbfc00000 /* Flash Bank #1 */
-
-/* The following #defines are needed to get flash environment right */
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN		(192 << 10)
-
-#define CONFIG_SYS_INIT_SP_OFFSET	0x400000
-
-/* We boot from this flash, selected with dip switch */
-#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_NOWHERE	1
-
-/* Address and size of Primary Environment Sector	*/
-#define CONFIG_ENV_ADDR		0xB0030000
-#define CONFIG_ENV_SIZE		0x10000
-
-#define CONFIG_FLASH_16BIT
-
-#define CONFIG_NR_DRAM_BANKS	2
-
-
-#define CONFIG_MEMSIZE_IN_BYTES
-
-/*---ATA PCMCIA ------------------------------------*/
-#define CONFIG_SYS_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */
-
-#define CONFIG_SYS_PCMCIA_MEM_ADDR  0x20000000
-#define CONFIG_SYS_PCMCIA_IO_BASE   0x28000000
-#define CONFIG_SYS_PCMCIA_ATTR_BASE 0x30000000
-
-#define CONFIG_PCMCIA_SLOT_A
-
-#define CONFIG_ATAPI 1
-#define CONFIG_MAC_PARTITION 1
-
-/* We run CF in "true ide" mode or a harddrive via pcmcia */
-#define CONFIG_IDE_PCMCIA 1
-
-/* We only support one slot for now */
-#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
-
-#undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
-#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET	0
-
-#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_IO_BASE
-
-/* Offset for data I/O			*/
-#define CONFIG_SYS_ATA_DATA_OFFSET	0
-
-/* Offset for normal register accesses	*/
-#define CONFIG_SYS_ATA_REG_OFFSET	0
-
-/* Offset for alternate registers	*/
-#define CONFIG_SYS_ATA_ALT_OFFSET	0x0200
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_DCACHE_SIZE		16384
-#define CONFIG_SYS_ICACHE_SIZE		16384
-#define CONFIG_SYS_CACHELINE_SIZE	32
-
-#define GPIO_CACONFIG  (1<<0)
-#define GPIO_DPACONFIG (1<<6)
-#define GPIO_ERESET    (1<<11)
-#define GPIO_EEDQ      (1<<17)
-#define GPIO_WDI       (1<<18)
-#define GPIO_RJ1LY     (1<<22)
-#define GPIO_RJ1LG     (1<<23)
-#define GPIO_LEDCLK    (1<<29)
-#define GPIO_LEDD      (1<<30)
-#define GPIO_CPU_LED   (1<<31)
-
-#endif	/* __CONFIG_H */