Merge branch 'master' of git://git.denx.de/u-boot-usb

* 'master' of git://git.denx.de/u-boot-usb:
  USB: efikamx: Enable USB on EfikaMX and EfikaSB
  USB: Add generic ULPI layer and a viewport
  USB: EHCI: Allow EHCI post-powerup configuration in board files
  USB: mx51evk: add end enable USB host support on port 1
  USB: mx53loco: add end enable USB host support on port 1
  USB: MX5: Add MX5 usb post-init callback
  USB: MX5: Abstract out mx51 USB pixmux configuration
  USB: MX5: add generic USB EHCI support for mx51 and mx53
  USB: MX5: add helper functions to enable USB clocks
  usb:gadget:s5p Enable the USB Gadget framework at GONI
  usb:gadget:s5p USB Device Controller (UDC) implementation
  ehci: speed up initialization
  usb: add help for missing start subcommand
  cosmetic: remove excess whitespace from usb command help
  usb: align usb_endpoint_descriptor to 16-bit boundary
  usbtty: init endpoints prior to startup events
  pxa: convert pxa27x_udc to use read and write functions
  pxa: activate the first usb host port on pxa27x by default
  pxa: fix usb host register mismatch
  ehci-fsl: correct size of ehci caplength
  USB: Add usb_event_poll() to get keyboards working with EHCI
  USB: gadaget: add Marvell controller support
  USB: Fix complaints about strict aliasing in OHCI-HCD
  USB: Drop dead code from usb_kbd.c
  USB: Rework usb_kbd.c
  USB: Add functionality to poll the USB keyboard via control EP

10 files changed, 786 insertions, 19 deletions

diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h
index 2b069d6b7..522487b39 100644
--- a/include/configs/efikamx.h
+++ b/include/configs/efikamx.h
@@ -44,6 +44,10 @@
 
 #define CONFIG_SYS_TEXT_BASE		0x97800000
 
+#define	CONFIG_L2_OFF
+#define	CONFIG_SYS_ICACHE_OFF
+#define	CONFIG_SYS_DCACHE_OFF
+
 /*
  * Bootloader Components Configuration
  */
@@ -53,6 +57,8 @@
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DATE
 #undef CONFIG_CMD_IMLS
 
 /*
@@ -175,17 +181,46 @@
 #endif
 
 /*
+ * USB
+ */
+#define	CONFIG_CMD_USB
+#ifdef	CONFIG_CMD_USB
+#define	CONFIG_USB_EHCI			/* Enable EHCI USB support */
+#define	CONFIG_USB_EHCI_MX5
+#define	CONFIG_USB_ULPI
+#define	CONFIG_USB_ULPI_VIEWPORT
+#define	CONFIG_MXC_USB_PORT	1
+#if	(CONFIG_MXC_USB_PORT == 0)
+#define	CONFIG_MXC_USB_PORTSC	(1 << 28)
+#define	CONFIG_MXC_USB_FLAGS	MXC_EHCI_INTERNAL_PHY
+#else
+#define	CONFIG_MXC_USB_PORTSC	(2 << 30)
+#define	CONFIG_MXC_USB_FLAGS	0
+#endif
+#define	CONFIG_EHCI_IS_TDI
+#define	CONFIG_USB_STORAGE
+#define	CONFIG_USB_HOST_ETHER
+#define	CONFIG_USB_KEYBOARD
+#define	CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
+#define CONFIG_PREBOOT
+/* USB NET */
+#ifdef	CONFIG_CMD_NET
+#define	CONFIG_USB_ETHER_ASIX
+#define	CONFIG_NET_MULTI
+#define	CONFIG_CMD_PING
+#define	CONFIG_CMD_DHCP
+#endif
+#endif /* CONFIG_CMD_USB */
+
+/*
  * Filesystems
  */
 #ifdef CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
+#ifdef	CONFIG_CMD_NET
+#define	CONFIG_CMD_NFS
+#endif
 #endif
-
-#undef CONFIG_CMD_PING
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-#define CONFIG_CMD_DATE
 
 /*
  * Miscellaneous configurable options
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index dd53f48b9..3b18a18d3 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -110,6 +110,19 @@
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NET
 
+/* USB Configs */
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_FAT
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX5
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_MXC_USB_PORT	1
+#define CONFIG_MXC_USB_PORTSC	PORT_PTS_ULPI
+#define CONFIG_MXC_USB_FLAGS	MXC_EHCI_POWER_PINS_ENABLED
+
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX		1
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 537649ee1..34a4edd41 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -72,6 +72,19 @@
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NET
 
+/* USB Configs */
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_FAT
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX5
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_MXC_USB_PORT	1
+#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS	0
+
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX		1
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index 3434de7f7..56b5547fd 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -237,5 +237,8 @@
 #define CONFIG_SYS_I2C_SPEED	50000
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_MAX_I2C_BUS	7
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_S3C_UDC_OTG
+#define CONFIG_USB_GADGET_DUALSPEED
 
 #endif	/* __CONFIG_H */
diff --git a/include/usb/ehci-fsl.h b/include/usb/ehci-fsl.h
index 67600ed52..28693020e 100644
--- a/include/usb/ehci-fsl.h
+++ b/include/usb/ehci-fsl.h
@@ -186,35 +186,36 @@ struct usb_ehci {
 	u32     gptimer1_ctrl;	/* 0x08C - General Purpose Timer 1 control */
 	u32	sbuscfg;	/* 0x090 - System Bus Interface Control */
 	u8	res2[0x6C];
-	u16	caplength;	/* 0x100 - Capability Register Length */
+	u8	caplength;	/* 0x100 - Capability Register Length */
+	u8	res3[0x1];
 	u16	hciversion;	/* 0x102 - Host Interface Version */
 	u32	hcsparams;	/* 0x104 - Host Structural Parameters */
 	u32	hccparams;	/* 0x108 - Host Capability Parameters */
-	u8	res3[0x14];
+	u8	res4[0x14];
 	u32	dciversion;	/* 0x120 - Device Interface Version */
 	u32	dciparams;	/* 0x124 - Device Controller Params */
-	u8	res4[0x18];
+	u8	res5[0x18];
 	u32	usbcmd;		/* 0x140 - USB Command */
 	u32	usbsts;		/* 0x144 - USB Status */
 	u32	usbintr;	/* 0x148 - USB Interrupt Enable */
 	u32	frindex;	/* 0x14C - USB Frame Index */
-	u8	res5[0x4];
+	u8	res6[0x4];
 	u32	perlistbase;	/* 0x154 - Periodic List Base
 					 - USB Device Address */
 	u32	ep_list_addr;	/* 0x158 - Next Asynchronous List
 					 - End Point Address */
-	u8	res6[0x4];
+	u8	res7[0x4];
 	u32	burstsize;	/* 0x160 - Programmable Burst Size */
 #define FSL_EHCI_TXPBURST(X)	((X) << 8)
 #define FSL_EHCI_RXPBURST(X)	(X)
 	u32	txfilltuning;	/* 0x164 - Host TT Transmit
 					   pre-buffer packet tuning */
-	u8	res7[0x8];
+	u8	res8[0x8];
 	u32	ulpi_viewpoint;	/* 0x170 - ULPI Reister Access */
-	u8	res8[0xc];
+	u8	res9[0xc];
 	u32	config_flag;	/* 0x180 - Configured Flag Register */
 	u32	portsc;		/* 0x184 - Port status/control */
-	u8	res9[0x1C];
+	u8	res10[0x1C];
 	u32	otgsc;		/* 0x1a4 - Oo-The-Go status and control */
 	u32	usbmode;	/* 0x1a8 - USB Device Mode */
 	u32	epsetupstat;	/* 0x1ac - End Point Setup Status */
@@ -228,18 +229,34 @@ struct usb_ehci {
 	u32	epctrl3;	/* 0x1cc - End Point Control 3 */
 	u32	epctrl4;	/* 0x1d0 - End Point Control 4 */
 	u32	epctrl5;	/* 0x1d4 - End Point Control 5 */
-	u8	res10[0x28];
+	u8	res11[0x28];
 	u32	usbgenctrl;	/* 0x200 - USB General Control */
 	u32	isiphyctrl;	/* 0x204 - On-Chip PHY Control */
-	u8	res11[0x1F8];
+	u8	res12[0x1F8];
 	u32	snoop1;		/* 0x400 - Snoop 1 */
 	u32	snoop2;		/* 0x404 - Snoop 2 */
 	u32	age_cnt_limit;	/* 0x408 - Age Count Threshold */
 	u32	prictrl;	/* 0x40c - Priority Control */
 	u32	sictrl;		/* 0x410 - System Interface Control */
-	u8	res12[0xEC];
+	u8	res13[0xEC];
 	u32	control;	/* 0x500 - Control */
-	u8	res13[0xafc];
+	u8	res14[0xafc];
 };
 
+/*
+ * For MXC SOCs
+ */
+#define MXC_EHCI_POWER_PINS_ENABLED	(1 << 5)
+#define MXC_EHCI_TTL_ENABLED		(1 << 6)
+#define MXC_EHCI_INTERNAL_PHY		(1 << 7)
+
+/* Board-specific initialization */
+int board_ehci_hcd_init(int port);
+
+/* CPU-specific abstracted-out IOMUX init */
+#ifdef CONFIG_MX51
+void setup_iomux_usb_h1(void);
+void setup_iomux_usb_h2(void);
+#endif
+
 #endif /* _EHCI_FSL_H */
diff --git a/include/usb/lin_gadget_compat.h b/include/usb/lin_gadget_compat.h
new file mode 100644
index 000000000..9b315118d
--- /dev/null
+++ b/include/usb/lin_gadget_compat.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics
+ * Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * This is a Linux kernel compatibility layer for USB Gadget
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __LIN_COMPAT_H__
+#define __LIN_COMPAT_H__
+
+/* common */
+#define spin_lock_init(...)
+#define spin_lock(...)
+#define spin_lock_irqsave(lock, flags) do {flags = 1; } while (0)
+#define spin_unlock(...)
+#define spin_unlock_irqrestore(lock, flags) do {flags = 0; } while (0)
+#define disable_irq(...)
+#define enable_irq(...)
+
+#define mutex_init(...)
+#define mutex_lock(...)
+#define mutex_unlock(...)
+
+#define WARN_ON(x) if (x) {printf("WARNING in %s line %d\n" \
+				  , __FILE__, __LINE__); }
+
+#define KERN_WARNING
+#define KERN_ERR
+#define KERN_NOTICE
+#define KERN_DEBUG
+
+#define GFP_KERNEL	0
+
+#define IRQ_HANDLED	1
+
+#define ENOTSUPP	524	/* Operation is not supported */
+
+#define kmalloc(size, type) memalign(CONFIG_SYS_CACHELINE_SIZE, size)
+#define kfree(addr) free(addr)
+#define mdelay(n) ({unsigned long msec = (n); while (msec--) udelay(1000); })
+
+#define __iomem
+#define min_t min
+#define dma_cache_maint(addr, size, mode) cache_flush()
+void cache_flush(void);
+
+#endif /* __LIN_COMPAT_H__ */
diff --git a/include/usb/mv_udc.h b/include/usb/mv_udc.h
new file mode 100644
index 000000000..51d36c3f3
--- /dev/null
+++ b/include/usb/mv_udc.h
@@ -0,0 +1,151 @@
+/*
+ * Copyright 2011, Marvell Semiconductor Inc.
+ * Lei Wen <leiwen@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#ifndef __MV_UDC_H__
+#define __MV_UDC_H__
+
+#include <asm/byteorder.h>
+#include <asm/errno.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+/* Endpoint 0 states */
+#define EP0_IDLE		0
+#define EP0_IN_DATA		1
+#define EP0_OUT_DATA		2
+#define EP0_XFER_COMPLETE	3
+
+
+/* Endpoint parameters */
+#define MAX_ENDPOINTS		4
+#define EP_MAX_PACKET_SIZE	0x200
+
+#define EP0_MAX_PACKET_SIZE	64
+#define UDC_OUT_ENDPOINT        0x02
+#define UDC_OUT_PACKET_SIZE	EP_MAX_PACKET_SIZE
+#define UDC_IN_ENDPOINT         0x01
+#define UDC_IN_PACKET_SIZE      EP_MAX_PACKET_SIZE
+#define UDC_INT_ENDPOINT        0x05
+#define UDC_INT_PACKET_SIZE     EP_MAX_PACKET_SIZE
+#define UDC_BULK_PACKET_SIZE    EP_MAX_PACKET_SIZE
+
+#define        NUM_ENDPOINTS   6
+#define		REQ_COUNT	12
+struct mv_ep {
+	struct usb_ep ep;
+	struct usb_request req;
+	struct list_head queue;
+	const struct usb_endpoint_descriptor *desc;
+};
+
+struct mv_udc {
+	u32 pad0[80];
+#define MICRO_8FRAME	0x8
+#define USBCMD_ITC(x)	(((x > 0xff) ? 0xff : x) << 16)
+#define USBCMD_FS2	(1 << 15)
+#define USBCMD_RST	(1 << 1)
+#define USBCMD_RUN	(1)
+	u32 usbcmd;		/* 0x140 */
+#define STS_SLI		(1 << 8)
+#define STS_URI		(1 << 6)
+#define STS_PCI		(1 << 2)
+#define STS_UEI		(1 << 1)
+#define STS_UI		(1 << 0)
+	u32 usbsts;		/* 0x144 */
+	u32 pad1[3];
+	u32 devaddr;		/* 0x154 */
+	u32 epinitaddr;		/* 0x158 */
+	u32 pad2[10];
+#define PTS_ENABLE	2
+#define PTS(x)		((x & 0x3) << 30)
+#define PFSC		(1 << 24)
+	u32 portsc;		/* 0x184 */
+	u32 pad3[8];
+#define USBMODE_DEVICE	2
+	u32 usbmode;		/* 0x1a8 */
+	u32 epstat;		/* 0x1ac */
+#define EPT_TX(x)	(1 << ((x & 0xffff) + 16))
+#define EPT_RX(x)	(1 << (x & 0xffff))
+	u32 epprime;		/* 0x1b0 */
+	u32 epflush;		/* 0x1b4 */
+	u32 pad4;
+	u32 epcomp;		/* 0x1bc */
+#define CTRL_TXE              (1 << 23)
+#define CTRL_TXR              (1 << 22)
+#define CTRL_RXE              (1 << 7)
+#define CTRL_RXR              (1 << 6)
+#define CTRL_TXT_BULK         (2 << 18)
+#define CTRL_RXT_BULK         (2 << 2)
+	u32 epctrl[16];		/* 0x1c0 */
+};
+
+struct mv_drv {
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver		*driver;
+	struct mv_udc			*udc;
+};
+
+struct ept_queue_head {
+	unsigned config;
+	unsigned current; /* read-only */
+
+	unsigned next;
+	unsigned info;
+	unsigned page0;
+	unsigned page1;
+	unsigned page2;
+	unsigned page3;
+	unsigned page4;
+	unsigned reserved_0;
+
+	unsigned char setup_data[8];
+
+	unsigned reserved_1;
+	unsigned reserved_2;
+	unsigned reserved_3;
+	unsigned reserved_4;
+};
+
+#define CONFIG_MAX_PKT(n)     ((n) << 16)
+#define CONFIG_ZLT            (1 << 29)    /* stop on zero-len xfer */
+#define CONFIG_IOS            (1 << 15)    /* IRQ on setup */
+
+struct ept_queue_item {
+	unsigned next;
+	unsigned info;
+	unsigned page0;
+	unsigned page1;
+	unsigned page2;
+	unsigned page3;
+	unsigned page4;
+	unsigned reserved;
+};
+
+#define TERMINATE 1
+#define INFO_BYTES(n)         ((n) << 16)
+#define INFO_IOC              (1 << 15)
+#define INFO_ACTIVE           (1 << 7)
+#define INFO_HALTED           (1 << 6)
+#define INFO_BUFFER_ERROR     (1 << 5)
+#define INFO_TX_ERROR         (1 << 3)
+
+extern int usb_lowlevel_init(void);
+#endif /* __MV_UDC_H__ */
diff --git a/include/usb/s3c_udc.h b/include/usb/s3c_udc.h
new file mode 100644
index 000000000..14dadc8b0
--- /dev/null
+++ b/include/usb/s3c_udc.h
@@ -0,0 +1,175 @@
+/*
+ * drivers/usb/gadget/s3c_udc.h
+ * Samsung S3C on-chip full/high speed USB device controllers
+ * Copyright (C) 2005 for Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef __S3C_USB_GADGET
+#define __S3C_USB_GADGET
+
+#include <asm/errno.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/list.h>
+#include <usb/lin_gadget_compat.h>
+
+#define PHY0_SLEEP              (1 << 5)
+
+/*-------------------------------------------------------------------------*/
+/* DMA bounce buffer size, 16K is enough even for mass storage */
+#define DMA_BUFFER_SIZE	(4096*4)
+
+#define EP0_FIFO_SIZE		64
+#define EP_FIFO_SIZE		512
+#define EP_FIFO_SIZE2		1024
+/* ep0-control, ep1in-bulk, ep2out-bulk, ep3in-int */
+#define S3C_MAX_ENDPOINTS	4
+#define S3C_MAX_HW_ENDPOINTS	16
+
+#define WAIT_FOR_SETUP          0
+#define DATA_STATE_XMIT         1
+#define DATA_STATE_NEED_ZLP     2
+#define WAIT_FOR_OUT_STATUS     3
+#define DATA_STATE_RECV         4
+#define WAIT_FOR_COMPLETE	5
+#define WAIT_FOR_OUT_COMPLETE	6
+#define WAIT_FOR_IN_COMPLETE	7
+#define WAIT_FOR_NULL_COMPLETE	8
+
+#define TEST_J_SEL		0x1
+#define TEST_K_SEL		0x2
+#define TEST_SE0_NAK_SEL	0x3
+#define TEST_PACKET_SEL		0x4
+#define TEST_FORCE_ENABLE_SEL	0x5
+
+/* ************************************************************************* */
+/* IO
+ */
+
+enum ep_type {
+	ep_control, ep_bulk_in, ep_bulk_out, ep_interrupt
+};
+
+struct s3c_ep {
+	struct usb_ep ep;
+	struct s3c_udc *dev;
+
+	const struct usb_endpoint_descriptor *desc;
+	struct list_head queue;
+	unsigned long pio_irqs;
+	int len;
+	void *dma_buf;
+
+	u8 stopped;
+	u8 bEndpointAddress;
+	u8 bmAttributes;
+
+	enum ep_type ep_type;
+	int fifo_num;
+};
+
+struct s3c_request {
+	struct usb_request req;
+	struct list_head queue;
+};
+
+struct s3c_udc {
+	struct usb_gadget gadget;
+	struct usb_gadget_driver *driver;
+
+	struct s3c_plat_otg_data *pdata;
+
+	void *dma_buf[S3C_MAX_ENDPOINTS+1];
+	dma_addr_t dma_addr[S3C_MAX_ENDPOINTS+1];
+
+	int ep0state;
+	struct s3c_ep ep[S3C_MAX_ENDPOINTS];
+
+	unsigned char usb_address;
+
+	unsigned req_pending:1, req_std:1, req_config:1;
+};
+
+extern struct s3c_udc *the_controller;
+
+#define ep_is_in(EP) (((EP)->bEndpointAddress&USB_DIR_IN) == USB_DIR_IN)
+#define ep_index(EP) ((EP)->bEndpointAddress&0xF)
+#define ep_maxpacket(EP) ((EP)->ep.maxpacket)
+
+/*-------------------------------------------------------------------------*/
+/* #define DEBUG_UDC */
+#ifdef DEBUG_UDC
+#define DBG(stuff...)		printf("udc: " stuff)
+#else
+#define DBG(stuff...)		do {} while (0)
+#endif
+
+#ifdef DEBUG_S3C_UDC_SETUP
+#define DEBUG_SETUP(fmt, args...) printk(fmt, ##args)
+#else
+#define DEBUG_SETUP(fmt, args...) do {} while (0)
+#endif
+
+#ifdef DEBUG_S3C_UDC_EP0
+#define DEBUG_EP0(fmt, args...) printk(fmt, ##args)
+#else
+#define DEBUG_EP0(fmt, args...) do {} while (0)
+#endif
+
+#ifdef DEBUG_S3C_UDC
+#define DEBUG(fmt, args...) printk(fmt, ##args)
+#else
+#define DEBUG(fmt, args...) do {} while (0)
+#endif
+
+#ifdef DEBUG_S3C_UDC_ISR
+#define DEBUG_ISR(fmt, args...) printk(fmt, ##args)
+#else
+#define DEBUG_ISR(fmt, args...) do {} while (0)
+#endif
+
+#ifdef DEBUG_S3C_UDC_OUT_EP
+#define DEBUG_OUT_EP(fmt, args...) printk(fmt, ##args)
+#else
+#define DEBUG_OUT_EP(fmt, args...) do {} while (0)
+#endif
+
+#ifdef DEBUG_S3C_UDC_IN_EP
+#define DEBUG_IN_EP(fmt, args...) printk(fmt, ##args)
+#else
+#define DEBUG_IN_EP(fmt, args...) do {} while (0)
+#endif
+
+#define ERR(stuff...)		printf("ERR udc: " stuff)
+#define WARN(stuff...)		printf("WARNING udc: " stuff)
+#define INFO(stuff...)		printf("INFO udc: " stuff)
+
+extern void otg_phy_init(struct s3c_udc *dev);
+extern void otg_phy_off(struct s3c_udc *dev);
+
+extern void s3c_udc_ep_set_stall(struct s3c_ep *ep);
+extern int s3c_udc_probe(struct s3c_plat_otg_data *pdata);
+
+struct s3c_plat_otg_data {
+	int		(*phy_control)(int on);
+	unsigned int	regs_phy;
+	unsigned int	regs_otg;
+	unsigned int    usb_phy_ctrl;
+	unsigned int    usb_flags;
+};
+#endif
diff --git a/include/usb/ulpi.h b/include/usb/ulpi.h
new file mode 100644
index 000000000..d87129087
--- /dev/null
+++ b/include/usb/ulpi.h
@@ -0,0 +1,298 @@
+/*
+ * Generic ULPI interface.
+ *
+ * Copyright (C) 2011 Jana Rapava <fermata7@gmail.com>
+ * Copyright (C) 2011 CompuLab, Ltd. <www.compulab.co.il>
+ *
+ * Authors: Jana Rapava <fermata7@gmail.com>
+ *	    Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * Register offsets taken from:
+ * linux/include/linux/usb/ulpi.h
+ *
+ * Original Copyrights follow:
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * This software is distributed under the terms of the GNU General
+ * Public License ("GPL") as published by the Free Software Foundation,
+ * version 2 of that License.
+ */
+
+#ifndef __USB_ULPI_H__
+#define __USB_ULPI_H__
+
+#define ULPI_ERROR	(1 << 8) /* overflow from any register value */
+
+#ifndef CONFIG_USB_ULPI_TIMEOUT
+#define CONFIG_USB_ULPI_TIMEOUT 1000	/* timeout in us */
+#endif
+
+/*
+ * Initialize the ULPI transciever and check the interface integrity.
+ * @ulpi_viewport -  the address of the ULPI viewport register.
+ *
+ * returns 0 on success, ULPI_ERROR on failure.
+ */
+int ulpi_init(u32 ulpi_viewport);
+
+/*
+ * Select transceiver speed.
+ * @speed	- ULPI_FC_HIGH_SPEED, ULPI_FC_FULL_SPEED (default),
+ *                ULPI_FC_LOW_SPEED,  ULPI_FC_FS4LS
+ * returns 0 on success, ULPI_ERROR on failure.
+ */
+int ulpi_select_transceiver(u32 ulpi_viewport, u8 speed);
+
+/*
+ * Enable/disable VBUS.
+ * @ext_power		- external VBUS supply is used (default is false)
+ * @ext_indicator	- external VBUS over-current indicator is used
+ *
+ * returns 0 on success, ULPI_ERROR on failure.
+ */
+int ulpi_enable_vbus(u32 ulpi_viewport, int on, int ext_power, int ext_ind);
+
+/*
+ * Enable/disable pull-down resistors on D+ and D- USB lines.
+ *
+ * returns 0 on success, ULPI_ERROR on failure.
+ */
+int ulpi_set_pd(u32 ulpi_viewport, int enable);
+
+/*
+ * Select OpMode.
+ * @opmode	- ULPI_FC_OPMODE_NORMAL (default), ULPI_FC_OPMODE_NONDRIVING,
+ *		  ULPI_FC_OPMODE_DISABLE_NRZI,	   ULPI_FC_OPMODE_NOSYNC_NOEOP
+ *
+ * returns 0 on success, ULPI_ERROR on failure.
+ */
+int ulpi_opmode_sel(u32 ulpi_viewport, u8 opmode);
+
+/*
+ * Switch to Serial Mode.
+ * @smode	- ULPI_IFACE_6_PIN_SERIAL_MODE or ULPI_IFACE_3_PIN_SERIAL_MODE
+ *
+ * returns 0 on success, ULPI_ERROR on failure.
+ *
+ * Notes:
+ * Switches immediately to Serial Mode.
+ * To return from Serial Mode, STP line needs to be asserted.
+ */
+int ulpi_serial_mode_enable(u32 ulpi_viewport, u8 smode);
+
+/*
+ * Put PHY into low power mode.
+ *
+ * returns 0 on success, ULPI_ERROR on failure.
+ *
+ * Notes:
+ * STP line must be driven low to keep the PHY in suspend.
+ * To resume the PHY, STP line needs to be asserted.
+ */
+int ulpi_suspend(u32 ulpi_viewport);
+
+/*
+ * Reset the transceiver. ULPI interface and registers are not affected.
+ *
+ * returns 0 on success, ULPI_ERROR on failure.
+ */
+int ulpi_reset(u32 ulpi_viewport);
+
+
+/* ULPI access methods below must be implemented for each ULPI viewport. */
+
+/*
+ * Write to the ULPI PHY register via the viewport.
+ * @reg		- the ULPI register (one of the fields in struct ulpi_regs).
+ * @value	- the value - only 8 lower bits are used, others ignored.
+ *
+ * returns 0 on success, ULPI_ERROR on failure.
+ */
+u32 ulpi_write(u32 ulpi_viewport, u8 *reg, u32 value);
+
+/*
+ * Read the ULPI PHY register content via the viewport.
+ * @reg		- the ULPI register (one of the fields in struct ulpi_regs).
+ *
+ * returns register content on success, ULPI_ERROR on failure.
+ */
+u32 ulpi_read(u32 ulpi_viewport, u8 *reg);
+
+/*
+ * Wait for the reset to complete.
+ * The Link must not attempt to access the PHY until the reset has
+ * completed and DIR line is de-asserted.
+ */
+int ulpi_reset_wait(u32 ulpi_viewport);
+
+/* Access Extended Register Set (indicator) */
+#define ACCESS_EXT_REGS_OFFSET	0x2f	/* read-write */
+/* Vendor-specific */
+#define VENDOR_SPEC_OFFSET	0x30
+
+/*
+ * Extended Register Set
+ *
+ * Addresses 0x00-0x3F map directly to Immediate Register Set.
+ * Addresses 0x40-0x7F are reserved.
+ * Addresses 0x80-0xff are vendor-specific.
+ */
+#define EXT_VENDOR_SPEC_OFFSET	0x80
+
+/* ULPI registers, bits and offsets definitions */
+struct ulpi_regs {
+	/* Vendor ID and Product ID: 0x00 - 0x03 Read-only */
+	u8	vendor_id_low;
+	u8	vendor_id_high;
+	u8	product_id_low;
+	u8	product_id_high;
+	/* Function Control: 0x04 - 0x06 Read */
+	u8	function_ctrl;		/* 0x04 Write */
+	u8	function_ctrl_set;	/* 0x05 Set */
+	u8	function_ctrl_clear;	/* 0x06 Clear */
+	/* Interface Control: 0x07 - 0x09 Read */
+	u8	iface_ctrl;		/* 0x07 Write */
+	u8	iface_ctrl_set;		/* 0x08 Set */
+	u8	iface_ctrl_clear;	/* 0x09 Clear */
+	/* OTG Control: 0x0A - 0x0C Read */
+	u8	otg_ctrl;		/* 0x0A Write */
+	u8	otg_ctrl_set;		/* 0x0B Set */
+	u8	otg_ctrl_clear;		/* 0x0C Clear */
+	/* USB Interrupt Enable Rising: 0x0D - 0x0F Read */
+	u8	usb_ie_rising;		/* 0x0D Write */
+	u8	usb_ie_rising_set;	/* 0x0E Set */
+	u8	usb_ie_rising_clear;	/* 0x0F Clear */
+	/* USB Interrupt Enable Falling: 0x10 - 0x12 Read */
+	u8	usb_ie_falling;		/* 0x10 Write */
+	u8	usb_ie_falling_set;	/* 0x11 Set */
+	u8	usb_ie_falling_clear;	/* 0x12 Clear */
+	/* USB Interrupt Status: 0x13 Read-only */
+	u8	usb_int_status;
+	/* USB Interrupt Latch: 0x14 Read-only with auto-clear */
+	u8	usb_int_latch;
+	/* Debug: 0x15 Read-only */
+	u8	debug;
+	/* Scratch Register: 0x16 - 0x18 Read */
+	u8	scratch;		/* 0x16 Write */
+	u8	scratch_set;		/* 0x17 Set */
+	u8	scratch_clear;		/* 0x18 Clear */
+	/*
+	 * Optional Carkit registers:
+	 * Carkit Control: 0x19 - 0x1B Read
+	 */
+	u8	carkit_ctrl;		/* 0x19 Write */
+	u8	carkit_ctrl_set;	/* 0x1A Set */
+	u8	carkit_ctrl_clear;	/* 0x1B Clear */
+	/* Carkit Interrupt Delay: 0x1C Read, Write */
+	u8	carkit_int_delay;
+	/* Carkit Interrupt Enable: 0x1D - 0x1F Read */
+	u8	carkit_ie;		/* 0x1D Write */
+	u8	carkit_ie_set;		/* 0x1E Set */
+	u8	carkit_ie_clear;	/* 0x1F Clear */
+	/* Carkit Interrupt Status: 0x20 Read-only */
+	u8	carkit_int_status;
+	/* Carkit Interrupt Latch: 0x21 Read-only with auto-clear */
+	u8	carkit_int_latch;
+	/* Carkit Pulse Control: 0x22 - 0x24 Read */
+	u8	carkit_pulse_ctrl;		/* 0x22 Write */
+	u8	carkit_pulse_ctrl_set;		/* 0x23 Set */
+	u8	carkit_pulse_ctrl_clear;	/* 0x24 Clear */
+	/*
+	 * Other optional registers:
+	 * Transmit Positive Width: 0x25 Read, Write
+	 */
+	u8	transmit_pos_width;
+	/* Transmit Negative Width: 0x26 Read, Write */
+	u8	transmit_neg_width;
+	/* Receive Polarity Recovery: 0x27 Read, Write */
+	u8	recv_pol_recovery;
+	/*
+	 * Addresses 0x28 - 0x2E are reserved, so we use offsets
+	 * for immediate registers with higher addresses
+	 */
+};
+
+/*
+ * Register Bits
+ */
+
+/* Function Control */
+#define ULPI_FC_XCVRSEL_MASK		(3 << 0)
+#define ULPI_FC_HIGH_SPEED		(0 << 0)
+#define ULPI_FC_FULL_SPEED		(1 << 0)
+#define ULPI_FC_LOW_SPEED		(2 << 0)
+#define ULPI_FC_FS4LS			(3 << 0)
+#define ULPI_FC_TERMSELECT		(1 << 2)
+#define ULPI_FC_OPMODE_MASK		(3 << 3)
+#define ULPI_FC_OPMODE_NORMAL		(0 << 3)
+#define ULPI_FC_OPMODE_NONDRIVING	(1 << 3)
+#define ULPI_FC_OPMODE_DISABLE_NRZI	(2 << 3)
+#define ULPI_FC_OPMODE_NOSYNC_NOEOP	(3 << 3)
+#define ULPI_FC_RESET			(1 << 5)
+#define ULPI_FC_SUSPENDM		(1 << 6)
+
+/* Interface Control */
+#define ULPI_IFACE_6_PIN_SERIAL_MODE	(1 << 0)
+#define ULPI_IFACE_3_PIN_SERIAL_MODE	(1 << 1)
+#define ULPI_IFACE_CARKITMODE		(1 << 2)
+#define ULPI_IFACE_CLOCKSUSPENDM	(1 << 3)
+#define ULPI_IFACE_AUTORESUME		(1 << 4)
+#define ULPI_IFACE_EXTVBUS_COMPLEMENT	(1 << 5)
+#define ULPI_IFACE_PASSTHRU		(1 << 6)
+#define ULPI_IFACE_PROTECT_IFC_DISABLE	(1 << 7)
+
+/* OTG Control */
+#define ULPI_OTG_ID_PULLUP		(1 << 0)
+#define ULPI_OTG_DP_PULLDOWN		(1 << 1)
+#define ULPI_OTG_DM_PULLDOWN		(1 << 2)
+#define ULPI_OTG_DISCHRGVBUS		(1 << 3)
+#define ULPI_OTG_CHRGVBUS		(1 << 4)
+#define ULPI_OTG_DRVVBUS		(1 << 5)
+#define ULPI_OTG_DRVVBUS_EXT		(1 << 6)
+#define ULPI_OTG_EXTVBUSIND		(1 << 7)
+
+/*
+ * USB Interrupt Enable Rising,
+ * USB Interrupt Enable Falling,
+ * USB Interrupt Status and
+ * USB Interrupt Latch
+ */
+#define ULPI_INT_HOST_DISCONNECT	(1 << 0)
+#define ULPI_INT_VBUS_VALID		(1 << 1)
+#define ULPI_INT_SESS_VALID		(1 << 2)
+#define ULPI_INT_SESS_END		(1 << 3)
+#define ULPI_INT_IDGRD			(1 << 4)
+
+/* Debug */
+#define ULPI_DEBUG_LINESTATE0		(1 << 0)
+#define ULPI_DEBUG_LINESTATE1		(1 << 1)
+
+/* Carkit Control */
+#define ULPI_CARKIT_CTRL_CARKITPWR		(1 << 0)
+#define ULPI_CARKIT_CTRL_IDGNDDRV		(1 << 1)
+#define ULPI_CARKIT_CTRL_TXDEN			(1 << 2)
+#define ULPI_CARKIT_CTRL_RXDEN			(1 << 3)
+#define ULPI_CARKIT_CTRL_SPKLEFTEN		(1 << 4)
+#define ULPI_CARKIT_CTRL_SPKRIGHTEN		(1 << 5)
+#define ULPI_CARKIT_CTRL_MICEN			(1 << 6)
+
+/* Carkit Interrupt Enable */
+#define ULPI_CARKIT_INT_EN_IDFLOAT_RISE		(1 << 0)
+#define ULPI_CARKIT_INT_EN_IDFLOAT_FALL		(1 << 1)
+#define ULPI_CARKIT_INT_EN_CARINTDET		(1 << 2)
+#define ULPI_CARKIT_INT_EN_DP_RISE		(1 << 3)
+#define ULPI_CARKIT_INT_EN_DP_FALL		(1 << 4)
+
+/* Carkit Interrupt Status and Latch */
+#define ULPI_CARKIT_INT_IDFLOAT			(1 << 0)
+#define ULPI_CARKIT_INT_CARINTDET		(1 << 1)
+#define ULPI_CARKIT_INT_DP			(1 << 2)
+
+/* Carkit Pulse Control*/
+#define ULPI_CARKIT_PLS_CTRL_TXPLSEN		(1 << 0)
+#define ULPI_CARKIT_PLS_CTRL_RXPLSEN		(1 << 1)
+#define ULPI_CARKIT_PLS_CTRL_SPKRLEFT_BIASEN	(1 << 2)
+#define ULPI_CARKIT_PLS_CTRL_SPKRRIGHT_BIASEN	(1 << 3)
+
+
+#endif /* __USB_ULPI_H__ */
diff --git a/include/usbdescriptors.h b/include/usbdescriptors.h
index 2dec3b93d..392fcf537 100644
--- a/include/usbdescriptors.h
+++ b/include/usbdescriptors.h
@@ -199,7 +199,7 @@ struct usb_endpoint_descriptor {
 	u8 bmAttributes;
 	u16 wMaxPacketSize;
 	u8 bInterval;
-} __attribute__ ((packed));
+} __attribute__ ((packed)) __attribute__ ((aligned(2)));
 
 struct usb_interface_descriptor {
 	u8 bLength;