* Patch by Thomas Frieden, 13 Nov 2002:

  Add code for AmigaOne board
  (preliminary merge to U-Boot, still WIP)

* Patch by Jon Diekema, 12 Nov 2002:
  - Adding URL for IEEE OUI lookup
  - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
    being defined.
  - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
    root-on-nfs macros are designed to switch how the default boot
    method gets defined.

1 files changed, 60 insertions, 2 deletions

diff --git a/common/cmd_fdc.c b/common/cmd_fdc.c
index e45b3361c..3ee342fcf 100644
--- a/common/cmd_fdc.c
+++ b/common/cmd_fdc.c
@@ -188,6 +188,30 @@ static FDC_COMMAND_STRUCT cmd; /* global command struct */
 #endif
 
 
+#ifdef CONFIG_AMIGAONEG3SE
+unsigned char INT6_Status;
+
+void fdc_interrupt(void)
+{
+    INT6_Status = 0x80;
+}
+
+/* waits for an interrupt (polling) */
+int wait_for_fdc_int(void)
+{
+	unsigned long timeout;
+	timeout = FDC_TIME_OUT;
+	while(((volatile)INT6_Status & 0x80) == 0) {
+		timeout--;
+		udelay(10);
+		if(timeout == 0) /* timeout occured */
+			return FALSE;
+	}
+	INT6_Status = 0;
+	return TRUE;
+}
+#endif
+   
 /* Supporting Functions */
 /* reads a Register of the FDC */
 unsigned char read_fdc_reg(unsigned int addr)
@@ -210,6 +234,7 @@ void write_fdc_reg(unsigned int addr, unsigned char val)
 	tmp[0]=val;
 }
 
+#ifndef CONFIG_AMIGAONEG3SE
 /* waits for an interrupt (polling) */
 int wait_for_fdc_int(void)
 {
@@ -224,6 +249,7 @@ int wait_for_fdc_int(void)
 	return TRUE;
 }
 
+#endif
 
 /* reads a byte from the FIFO of the FDC and checks direction and RQM bit
    of the MSR. returns -1 if timeout, or byte if ok */
@@ -416,7 +442,7 @@ int fdc_seek(FDC_COMMAND_STRUCT *pCMD,FD_GEO_STRUCT *pFG)
 	return(fdc_issue_cmd(pCMD,pFG));
 }
 
-
+#ifndef CONFIG_AMIGAONEG3SE
 /* terminates current command, by not servicing the FIFO
  * waits for interrupt and fills in the result bytes */
 int fdc_terminate(FDC_COMMAND_STRUCT *pCMD)
@@ -430,6 +456,27 @@ int fdc_terminate(FDC_COMMAND_STRUCT *pCMD)
 	}
 	return TRUE;
 }
+#endif
+#ifdef CONFIG_AMIGAONEG3SE
+int fdc_terminate(FDC_COMMAND_STRUCT *pCMD)
+{
+	int i;
+	for(i=0;i<100;i++)
+		udelay(500); /* wait 500usec for fifo overrun */
+	while((INT6_Status&0x80)==0x00); /* wait as long as no int has occured */
+	for(i=0;i<7;i++) {
+		pCMD->result[i]=(unsigned char)read_fdc_byte();
+	}
+	INT6_Status = 0;
+	return TRUE;
+}
+
+#endif
+
+#ifdef CONFIG_AMIGAONEG3SE
+#define disable_interrupts() 0
+#define enable_interrupts() (void)0
+#endif
 
 /* reads data from FDC, seek commands are issued automatic */
 int fdc_read_data(unsigned char *buffer, unsigned long blocks,FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG)
@@ -550,6 +597,11 @@ retrycal:
 	return TRUE;
 }
 
+#ifdef CONFIG_AMIGAONEG3SE
+#undef disable_interrupts()
+#undef enable_interrupts()
+#endif
+
 /* Scan all drives and check if drive is present and disk is inserted */
 int fdc_check_drive(FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG)
 {
@@ -590,6 +642,7 @@ int fdc_check_drive(FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG)
 }
 
 
+
 /**************************************************************************
 * int fdc_setup
 * setup the fdc according the datasheet
@@ -597,9 +650,13 @@ int fdc_check_drive(FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG)
 */
 int fdc_setup(int drive, FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG)
 {
-
 	int i;
 
+#ifdef CONFIG_AMIGAONEG3SE
+	irq_install_handler(6, (interrupt_handler_t *)fdc_interrupt, NULL);
+	i8259_unmask_irq(6);
+#endif
+
 #ifdef CFG_FDC_HW_INIT
         fdc_hw_init ();
 #endif
@@ -648,6 +705,7 @@ int fdc_setup(int drive, FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG)
 	/* then, we clear the reset in the DOR */
 	/* fdc_check_drive(pCMD,pFG);	*/
 	/*	write_fdc_reg(FDC_DOR,0x04); */
+
 	return TRUE;
 }
 #endif /* ((CONFIG_COMMANDS & CFG_CMD_FDC)||(CONFIG_COMMANDS & CFG_CMD_FDOS))*/