BOOT: Add "bootz" command to boot Linux zImage on ARM

This command boots Linux zImage from where the zImage is loaded to. Passing
initrd and fdt is supported.

Tested on i.MX28 based DENX M28EVK
Tested on PXA270 based Voipac PXA270.

NOTE: This currently only supports ARM, but other architectures can be easily
added by defining bootz_setup().

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Warren <TWarren@nvidia.com>
Cc: albert.u.boot@aribaud.net
Cc: afleming@gmail.com,
Cc: Simon Glass <sjg@chromium.org>,
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>

1 files changed, 132 insertions, 9 deletions

diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index d88f6c025..5e5d572eb 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -169,25 +169,25 @@ void arch_preboot_os(void) __attribute__((weak, alias("__arch_preboot_os")));
 
 #define IH_INITRD_ARCH IH_ARCH_DEFAULT
 
-static void bootm_start_lmb(void)
-{
 #ifdef CONFIG_LMB
+static void boot_start_lmb(bootm_headers_t *images)
+{
 	ulong		mem_start;
 	phys_size_t	mem_size;
 
-	lmb_init(&images.lmb);
+	lmb_init(&images->lmb);
 
 	mem_start = getenv_bootm_low();
 	mem_size = getenv_bootm_size();
 
-	lmb_add(&images.lmb, (phys_addr_t)mem_start, mem_size);
+	lmb_add(&images->lmb, (phys_addr_t)mem_start, mem_size);
 
-	arch_lmb_reserve(&images.lmb);
-	board_lmb_reserve(&images.lmb);
+	arch_lmb_reserve(&images->lmb);
+	board_lmb_reserve(&images->lmb);
+}
 #else
-# define lmb_reserve(lmb, base, size)
+static inline void boot_start_lmb(bootm_headers_t *images) { }
 #endif
-}
 
 static int bootm_start(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
@@ -197,7 +197,7 @@ static int bootm_start(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
 	memset((void *)&images, 0, sizeof(images));
 	images.verify = getenv_yesno("verify");
 
-	bootm_start_lmb();
+	boot_start_lmb(&images);
 
 	bootstage_mark_name(BOOTSTAGE_ID_BOOTM_START, "bootm_start");
 
@@ -1518,3 +1518,126 @@ static int do_bootm_integrity(int flag, int argc, char * const argv[],
 	return 1;
 }
 #endif
+
+#ifdef CONFIG_CMD_BOOTZ
+
+static int __bootz_setup(void *image, void **start, void **end)
+{
+	/* Please define bootz_setup() for your platform */
+
+	puts("Your platform's zImage format isn't supported yet!\n");
+	return -1;
+}
+int bootz_setup(void *image, void **start, void **end)
+	__attribute__((weak, alias("__bootz_setup")));
+
+/*
+ * zImage booting support
+ */
+static int bootz_start(cmd_tbl_t *cmdtp, int flag, int argc,
+			char * const argv[], bootm_headers_t *images)
+{
+	int ret;
+	void *zi_start, *zi_end;
+
+	memset(images, 0, sizeof(bootm_headers_t));
+
+	boot_start_lmb(images);
+
+	/* Setup Linux kernel zImage entry point */
+	if (argc < 2) {
+		images->ep = load_addr;
+		debug("*  kernel: default image load address = 0x%08lx\n",
+				load_addr);
+	} else {
+		images->ep = simple_strtoul(argv[1], NULL, 16);
+		debug("*  kernel: cmdline image address = 0x%08lx\n",
+			images->ep);
+	}
+
+	ret = bootz_setup((void *)images->ep, &zi_start, &zi_end);
+	if (ret != 0)
+		return 1;
+
+	lmb_reserve(&images->lmb, images->ep, zi_end - zi_start);
+
+	/* Find ramdisk */
+	ret = boot_get_ramdisk(argc, argv, images, IH_INITRD_ARCH,
+			&images->rd_start, &images->rd_end);
+	if (ret) {
+		puts("Ramdisk image is corrupt or invalid\n");
+		return 1;
+	}
+
+#if defined(CONFIG_OF_LIBFDT)
+	/* find flattened device tree */
+	ret = boot_get_fdt(flag, argc, argv, images,
+			   &images->ft_addr, &images->ft_len);
+	if (ret) {
+		puts("Could not find a valid device tree\n");
+		return 1;
+	}
+
+	set_working_fdt_addr(images->ft_addr);
+#endif
+
+	return 0;
+}
+
+static int do_bootz(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	ulong		iflag;
+	bootm_headers_t	images;
+
+	if (bootz_start(cmdtp, flag, argc, argv, &images))
+		return 1;
+
+	/*
+	 * We have reached the point of no return: we are going to
+	 * overwrite all exception vector code, so we cannot easily
+	 * recover from any failures any more...
+	 */
+	iflag = disable_interrupts();
+
+#if defined(CONFIG_CMD_USB)
+	/*
+	 * turn off USB to prevent the host controller from writing to the
+	 * SDRAM while Linux is booting. This could happen (at least for OHCI
+	 * controller), because the HCCA (Host Controller Communication Area)
+	 * lies within the SDRAM and the host controller writes continously to
+	 * this area (as busmaster!). The HccaFrameNumber is for example
+	 * updated every 1 ms within the HCCA structure in SDRAM! For more
+	 * details see the OpenHCI specification.
+	 */
+	usb_stop();
+#endif
+
+#ifdef CONFIG_SILENT_CONSOLE
+	fixup_silent_linux();
+#endif
+	arch_preboot_os();
+
+	do_bootm_linux(0, argc, argv, &images);
+#ifdef DEBUG
+	puts("\n## Control returned to monitor - resetting...\n");
+#endif
+	do_reset(cmdtp, flag, argc, argv);
+
+	return 1;
+}
+
+U_BOOT_CMD(
+	bootz,	CONFIG_SYS_MAXARGS,	1,	do_bootz,
+	"boot Linux zImage image from memory",
+	"[addr [initrd] [fdt]]\n    - boot Linux zImage stored in memory\n"
+	"\tThe argument 'initrd' is optional and specifies the address\n"
+	"\tof the initrd in memory.\n"
+#if defined(CONFIG_OF_LIBFDT)
+	"\tWhen booting a Linux kernel which requires a flat device-tree\n"
+	"\ta third argument is required which is the address of the\n"
+	"\tdevice-tree blob. To boot that kernel without an initrd image,\n"
+	"\tuse a '-' for the second argument. If you do not pass a third\n"
+	"\ta bd_info struct will be passed instead\n"
+#endif
+);
+#endif	/* CONFIG_CMD_BOOTZ */