ppc4xx: Updates to Korat-specific code

This patch contains updates for changes for the Korat PPC440EPx board.
These changes include:

(1) Support for "permanent" and "upgradable" copies of U-Boot, as
described in the new "doc/README.korat" file;

(2) a new memory map for the registers in the board's CPLD;

(3) a revised format for manufacturer's data in serial EEPROM; and

(4) changes to track updates to U-Boot for the Sequoia board.

Signed-off-by: Larry Johnson <lrj@acm.org>

4 files changed, 369 insertions, 53 deletions

diff --git a/board/korat/config.mk b/board/korat/config.mk
index 39966e03e..fa8374f17 100644
--- a/board/korat/config.mk
+++ b/board/korat/config.mk
@@ -24,14 +24,24 @@
 # Korat (PPC440EPx) board
 #
 
-TEXT_BASE = 0xFFFA0000
-
 PLATFORM_CPPFLAGS += -DCONFIG_440=1
 
 ifeq ($(debug),1)
 PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
+ifeq ($(emul),1)
+PLATFORM_CPPFLAGS += -fno-schedule-insns -fno-schedule-insns2
+endif
+
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8CFF0000
+endif
+
+ifeq ($(perm),1)
+PLATFORM_CPPFLAGS += -DCONFIG_KORAT_PERMANENT
+TEXT_BASE = 0xFFFA0000
+else
+TEXT_BASE = 0xF7F60000
+LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-F7FC.lds
 endif
diff --git a/board/korat/init.S b/board/korat/init.S
index bd0e8b4da..bf8b2c808 100644
--- a/board/korat/init.S
+++ b/board/korat/init.S
@@ -43,7 +43,7 @@ tlbtab:
 	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
 	 * speed up boot process. It is patched after relocation to enable SA_I
 	 */
-	tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
+	tlbentry( 0xF0000000, SZ_256M, 0xF0000000, 1, AC_R|AC_W|AC_X|SA_G )
 
 	/*
 	 * TLB entries for SDRAM are not needed on this platform.  They are
@@ -52,24 +52,32 @@ tlbtab:
 
 #ifdef CFG_INIT_RAM_DCACHE
 	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
-	tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
+	tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0,
+		  AC_R|AC_W|AC_X|SA_G )
 #endif
 
 	/* TLB-entry for PCI Memory */
-	tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
-	tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
+	tlbentry( CFG_PCI_MEMBASE + 0x00000000, SZ_256M,
+		  CFG_PCI_MEMBASE + 0x00000000, 1, AC_R|AC_W|SA_G|SA_I )
+
+	tlbentry( CFG_PCI_MEMBASE + 0x10000000, SZ_256M,
+		  CFG_PCI_MEMBASE + 0x10000000, 1, AC_R|AC_W|SA_G|SA_I )
+
+	tlbentry( CFG_PCI_MEMBASE + 0x20000000, SZ_256M,
+		  CFG_PCI_MEMBASE + 0x20000000, 1, AC_R|AC_W|SA_G|SA_I )
+
+	tlbentry( CFG_PCI_MEMBASE + 0x30000000, SZ_256M,
+		  CFG_PCI_MEMBASE + 0x30000000, 1, AC_R|AC_W|SA_G|SA_I )
 
 	/* TLB-entry for EBC */
 	tlbentry( CFG_CPLD_BASE, SZ_1K, CFG_CPLD_BASE, 1, AC_R|AC_W|SA_G|SA_I )
 
 	/* TLB-entry for Internal Registers & OCM */
 	/* I wonder why this must be executable -- lrj@acm.org 2007-10-08 */
-	tlbentry( 0xE0000000, SZ_16M, 0xE0000000, 0,  AC_R|AC_W|AC_X|SA_I )
+	tlbentry( 0xE0000000, SZ_16M, 0xE0000000, 0, AC_R|AC_W|AC_X|SA_I )
 
 	/*TLB-entry PCI registers*/
-	tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1,  AC_R|AC_W|SA_G|SA_I )
+	tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_R|AC_W|SA_G|SA_I )
 
 	/* TLB-entry for peripherals */
 	tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|SA_G|SA_I)
@@ -78,3 +86,10 @@ tlbtab:
 	tlbentry(0xE8000000, SZ_64K, 0xE8000000, 1, AC_R|AC_W|SA_G|SA_I)
 
 	tlbtab_end
+
+#if defined(CONFIG_KORAT_PERMANENT)
+	.globl	korat_branch_absolute
+korat_branch_absolute:
+	mtlr	r3
+	blr
+#endif
diff --git a/board/korat/korat.c b/board/korat/korat.c
index 90fd0a753..a7b4b27c6 100644
--- a/board/korat/korat.c
+++ b/board/korat/korat.c
@@ -2,12 +2,12 @@
  * (C) Copyright 2007-2008
  * Larry Johnson, lrj@acm.org
  *
- * (C) Copyright 2006-2008
+ * (C) Copyright 2006-2007
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * (C) Copyright 2006
  * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
+ * Alain Saurel,	    AMCC/IBM, alain.saurel@fr.ibm.com
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -39,12 +39,45 @@ extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
 ulong flash_get_size(ulong base, int banknum);
 
+#if defined(CONFIG_KORAT_PERMANENT)
+void korat_buzzer(int const on)
+{
+	if (on) {
+		out_8((u8 *) CFG_CPLD_BASE + 0x05,
+		      in_8((u8 *) CFG_CPLD_BASE + 0x05) | 0x80);
+	} else {
+		out_8((u8 *) CFG_CPLD_BASE + 0x05,
+		      in_8((u8 *) CFG_CPLD_BASE + 0x05) & ~0x80);
+	}
+}
+#endif
+
 int board_early_init_f(void)
 {
-	u32 sdr0_pfc1, sdr0_pfc2;
-	u32 reg;
+	uint32_t sdr0_pfc1, sdr0_pfc2;
+	uint32_t reg;
 	int eth;
 
+#if defined(CONFIG_KORAT_PERMANENT)
+	unsigned mscount;
+
+	extern void korat_branch_absolute(uint32_t addr);
+
+	for (mscount = 0;  mscount < CFG_KORAT_MAN_RESET_MS; ++mscount) {
+		udelay(1000);
+		if (gpio_read_in_bit(CFG_GPIO_RESET_PRESSED_)) {
+			/* This call does not return. */
+			korat_branch_absolute(
+				CFG_FLASH1_TOP - 2 * CFG_ENV_SECT_SIZE - 4);
+		}
+	}
+	korat_buzzer(1);
+	while (!gpio_read_in_bit(CFG_GPIO_RESET_PRESSED_))
+		udelay(1000);
+
+	korat_buzzer(0);
+#endif
+
 	mtdcr(ebccfga, xbcfg);
 	mtdcr(ebccfgd, 0xb8400000);
 
@@ -75,8 +108,11 @@ int board_early_init_f(void)
 	mtdcr(uic2vr, 0x00000000);	/* int31 highest, base=0x000 */
 	mtdcr(uic2sr, 0xffffffff);	/* clear all */
 
-	/* take sim card reader and CF controller out of reset */
-	out_8((u8 *) CFG_CPLD_BASE + 0x04, 0x80);
+	/*
+	 * Take sim card reader and CF controller out of reset.  Also enable PHY
+	 * auto-detect until board-specific PHY resets are available.
+	 */
+	out_8((u8 *) CFG_CPLD_BASE + 0x02, 0xC0);
 
 	/* Configure the two Ethernet PHYs.  For each PHY, configure for fiber
 	 * if the SFP module is present, and for copper if it is not present.
@@ -85,8 +121,8 @@ int board_early_init_f(void)
 		if (gpio_read_in_bit(CFG_GPIO_SFP0_PRESENT_ + eth)) {
 			/* SFP module not present: configure PHY for copper. */
 			/* Set PHY to autonegotate 10 MB, 100MB, or 1 GB */
-			out_8((u8 *) CFG_CPLD_BASE + 0x06,
-			      in_8((u8 *) CFG_CPLD_BASE + 0x06) |
+			out_8((u8 *) CFG_CPLD_BASE + 0x03,
+			      in_8((u8 *) CFG_CPLD_BASE + 0x03) |
 			      0x06 << (4 * eth));
 		} else {
 			/* SFP module present: configure PHY for fiber and
@@ -99,10 +135,18 @@ int board_early_init_f(void)
 	gpio_write_bit(CFG_GPIO_PHY0_EN, 1);
 	gpio_write_bit(CFG_GPIO_PHY1_EN, 1);
 
-	/* select Ethernet pins */
+	/* Wait 1 ms, then enable Fiber signal detect to PHYs. */
+	udelay(1000);
+	out_8((u8 *) CFG_CPLD_BASE + 0x03,
+	      in_8((u8 *) CFG_CPLD_BASE + 0x03) | 0x88);
+
+	/* select Ethernet (and optionally IIC1) pins */
 	mfsdr(SDR0_PFC1, sdr0_pfc1);
 	sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) |
 		SDR0_PFC1_SELECT_CONFIG_4;
+#ifdef CONFIG_I2C_MULTI_BUS
+	sdr0_pfc1 |= ((sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_IIC1_SEL);
+#endif
 	mfsdr(SDR0_PFC2, sdr0_pfc2);
 	sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) |
 		SDR0_PFC2_SELECT_CONFIG_4;
@@ -116,6 +160,58 @@ int board_early_init_f(void)
 	return 0;
 }
 
+/*
+ * The boot flash on CS0 normally has its write-enable pin disabled, and so will
+ * not respond to CFI commands.  This routine therefore fills in the flash
+ * information for the boot flash.  (The flash at CS1 operates normally.)
+ */
+ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
+{
+	uint32_t addr;
+	int i;
+
+	if (1 != banknum)
+		return 0;
+
+	info->size		= CFG_FLASH0_SIZE;
+	info->sector_count	= CFG_FLASH0_SIZE / 0x20000;
+	info->flash_id		= 0x01000000;
+	info->portwidth		= 2;
+	info->chipwidth		= 2;
+	info->buffer_size	= 32;
+	info->erase_blk_tout	= 16384;
+	info->write_tout	= 2;
+	info->buffer_write_tout	= 5;
+	info->vendor		= 2;
+	info->cmd_reset		= 0x00F0;
+	info->interface		= 2;
+	info->legacy_unlock	= 0;
+	info->manufacturer_id	= 1;
+	info->device_id		= 0x007E;
+
+#if CFG_FLASH0_SIZE == 0x01000000
+	info->device_id2	= 0x2101;
+#elif CFG_FLASH0_SIZE == 0x04000000
+	info->device_id2	= 0x2301;
+#else
+#error Unable to set device_id2 for current CFG_FLASH0_SIZE
+#endif
+
+	info->ext_addr		= 0x0040;
+	info->cfi_version	= 0x3133;
+	info->cfi_offset	= 0x0055;
+	info->addr_unlock1	= 0x00000555;
+	info->addr_unlock2	= 0x000002AA;
+	info->name		= "CFI conformant";
+	for (i = 0, addr = -info->size;
+	     i < info->sector_count;
+	     ++i, addr += 0x20000) {
+		info->start[i] = addr;
+		info->protect[i] = 0x00;
+	}
+	return 1;
+}
+
 static int man_data_read(unsigned int addr)
 {
 	/*
@@ -189,12 +285,20 @@ static void set_serial_number(void)
 	 * If the environmental variable "serial#" is not set, try to set it
 	 * from the manufacturer's information serial EEPROM.
 	 */
-	char s[MAN_SERIAL_NO_LENGTH + 1];
+	char s[MAN_INFO_LENGTH + MAN_MAC_ADDR_LENGTH + 2];
+
+	if (getenv("serial#"))
+		return;
+
+	if (!man_data_read_field(s, MAN_INFO_FIELD, MAN_INFO_LENGTH))
+		return;
+
+	s[MAN_INFO_LENGTH] = '-';
+	if (!man_data_read_field(s + MAN_INFO_LENGTH + 1, MAN_MAC_ADDR_FIELD,
+				 MAN_MAC_ADDR_LENGTH))
+		return;
 
-	if (0 == getenv("serial#") &&
-	    0 != man_data_read_field(s, MAN_SERIAL_NO_FIELD,
-				     MAN_SERIAL_NO_LENGTH))
-		setenv("serial#", s);
+	setenv("serial#", s);
 }
 
 static void set_mac_addresses(void)
@@ -204,45 +308,58 @@ static void set_mac_addresses(void)
 	 * set, try to set them from the manufacturer's information serial
 	 * EEPROM.
 	 */
-	char s[MAN_MAC_ADDR_LENGTH + 1];
+
+#if MAN_MAC_ADDR_LENGTH % 2 != 0
+#error MAN_MAC_ADDR_LENGTH must be an even number
+#endif
+
+	char s[(3 * MAN_MAC_ADDR_LENGTH) / 2];
+	char *src;
+	char *dst;
 
 	if (0 != getenv("ethaddr") && 0 != getenv("eth1addr"))
 		return;
 
-	if (0 == man_data_read_field(s, MAN_MAC_ADDR_FIELD,
-				     MAN_MAC_ADDR_LENGTH))
+	if (0 == man_data_read_field(s + (MAN_MAC_ADDR_LENGTH / 2) - 1,
+				     MAN_MAC_ADDR_FIELD, MAN_MAC_ADDR_LENGTH))
 		return;
 
+	for (src = s + (MAN_MAC_ADDR_LENGTH / 2) - 1, dst = s; src != dst;) {
+		*dst++ = *src++;
+		*dst++ = *src++;
+		*dst++ = ':';
+	}
 	if (0 == getenv("ethaddr"))
 		setenv("ethaddr", s);
 
 	if (0 == getenv("eth1addr")) {
-		++s[MAN_MAC_ADDR_LENGTH - 1];
+		++s[((3 * MAN_MAC_ADDR_LENGTH) / 2) - 2];
 		setenv("eth1addr", s);
 	}
 }
 
 int misc_init_r(void)
 {
-	uint pbcr;
-	int size_val = 0;
-	u32 reg;
+	uint32_t pbcr;
+	int size_val;
+	uint32_t reg;
 	unsigned long usb2d0cr = 0;
 	unsigned long usb2phy0cr, usb2h0cr = 0;
 	unsigned long sdr0_pfc1;
-	char *act = getenv("usbact");
-
-	/* Re-do flash sizing to get full correct info */
+	uint32_t const flash1_size = gd->bd->bi_flashsize - CFG_FLASH0_SIZE;
+	char const *const act = getenv("usbact");
 
-	/* adjust flash start and offset */
-	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
+	/*
+	 * Re-do FLASH1 sizing and adjust flash start and offset.
+	 */
+	gd->bd->bi_flashstart = CFG_FLASH1_TOP - flash1_size;
 	gd->bd->bi_flashoffset = 0;
 
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(ebccfga, pb1cr);
 	pbcr = mfdcr(ebccfgd);
-	size_val = ffs(gd->bd->bi_flashsize) - 21;
+	size_val = ffs(flash1_size) - 21;
 	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
-	mtdcr(ebccfga, pb0cr);
+	mtdcr(ebccfga, pb1cr);
 	mtdcr(ebccfgd, pbcr);
 
 	/*
@@ -250,14 +367,37 @@ int misc_init_r(void)
 	 */
 	flash_get_size(gd->bd->bi_flashstart, 0);
 
-	/* Monitor protection ON by default */
-	(void)flash_protect(FLAG_PROTECT_SET, -CFG_MONITOR_LEN, 0xffffffff,
-			    &flash_info[0]);
+	/*
+	 * Re-do FLASH1 sizing and adjust flash offset to reserve space for
+	 * environment
+	 */
+	gd->bd->bi_flashoffset =
+		CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - CFG_FLASH1_ADDR;
 
+	mtdcr(ebccfga, pb1cr);
+	pbcr = mfdcr(ebccfgd);
+	size_val = ffs(gd->bd->bi_flashsize - CFG_FLASH0_SIZE) - 21;
+	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
+	mtdcr(ebccfga, pb1cr);
+	mtdcr(ebccfgd, pbcr);
+
+	/* Monitor protection ON by default */
+#if defined(CONFIG_KORAT_PERMANENT)
+	(void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
+			    CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+			    flash_info + 1);
+#else
+	(void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
+			    CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+			    flash_info);
+#endif
 	/* Env protection ON by default */
+	(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
+			    CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+			    flash_info);
 	(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
-			    CFG_ENV_ADDR_REDUND + 2 * CFG_ENV_SECT_SIZE - 1,
-			    &flash_info[0]);
+			    CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+			    flash_info);
 
 	/*
 	 * USB suff...
@@ -393,6 +533,8 @@ int misc_init_r(void)
 
 	set_serial_number();
 	set_mac_addresses();
+	gpio_write_bit(CFG_GPIO_ATMEGA_RESET_, 1);
+
 	return 0;
 }
 
@@ -402,10 +544,10 @@ int checkboard(void)
 	u8 const rev = in_8((u8 *) CFG_CPLD_BASE + 0);
 
 	printf("Board: Korat, Rev. %X", rev);
-	if (s != NULL)
+	if (s)
 		printf(", serial# %s", s);
 
-	printf(", Ethernet PHY 0: ");
+	printf(".\n       Ethernet PHY 0: ");
 	if (gpio_read_out_bit(CFG_GPIO_PHY0_FIBER_SEL))
 		printf("fiber");
 	else
@@ -418,7 +560,10 @@ int checkboard(void)
 		printf("copper");
 
 	printf(".\n");
-	return (0);
+#if defined(CONFIG_KORAT_PERMANENT)
+	printf("       Executing permanent copy of U-Boot.\n");
+#endif
+	return 0;
 }
 
 #if defined(CFG_DRAM_TEST)
@@ -529,23 +674,26 @@ void pci_target_init(struct pci_controller *hose)
 	/*
 	 * PowerPC440EPX PCI Master configuration.
 	 * Map one 1Gig range of PLB/processor addresses to PCI memory space.
-	 * PLB address 0xA0000000-0xDFFFFFFF
-	 *     ==> PCI address 0xA0000000-0xDFFFFFFF
+	 * PLB address 0x80000000-0xBFFFFFFF
+	 *     ==> PCI address 0x80000000-0xBFFFFFFF
 	 * Use byte reversed out routines to handle endianess.
 	 * Make this region non-prefetchable.
 	 */
 	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute */
 						/* - disabled b4 setting */
 	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM0PCILA,
+	       CFG_PCI_MEMBASE);		/* PMM0 PCI Low Address */
 	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
 	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, */
 						/* and enable region */
 
 	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute */
 						/* - disabled b4 setting */
-	out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
-	out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM1LA,
+	       CFG_PCI_MEMBASE + 0x20000000);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM1PCILA,
+	       CFG_PCI_MEMBASE + 0x20000000);	/* PMM0 PCI Low Address */
 	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
 	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, */
 						/* and enable region */
diff --git a/board/korat/u-boot-F7FC.lds b/board/korat/u-boot-F7FC.lds
new file mode 100644
index 000000000..cceb4f502
--- /dev/null
+++ b/board/korat/u-boot-F7FC.lds
@@ -0,0 +1,143 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xF7FBFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  .bootpg 0xF7FBF000 :
+  {
+    cpu/ppc4xx/start.o	(.bootpg)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss (NOLOAD)       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+
+  _end = . ;
+  PROVIDE (end = .);
+}