rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

15 files changed, 128 insertions, 128 deletions

diff --git a/board/eltec/bab7xx/asm_init.S b/board/eltec/bab7xx/asm_init.S
index 2a9b33e12..a85fb8b89 100644
--- a/board/eltec/bab7xx/asm_init.S
+++ b/board/eltec/bab7xx/asm_init.S
@@ -125,7 +125,7 @@ board_asm_init:
     lis     r2, 0xfee0
     ori     r2, r2, 0xcfc
 
-#ifdef CFG_ADDRESS_MAP_A
+#ifdef CONFIG_SYS_ADDRESS_MAP_A
 /*
  * Switch to address map A if necessary.
  */
@@ -835,17 +835,17 @@ toggleError2:
 /*
  * Get base addr of ISA I/O space
  */
-    lis     r6, CFG_ISA_IO@h
-    ori     r6, r6, CFG_ISA_IO@l
+    lis     r6, CONFIG_SYS_ISA_IO@h
+    ori     r6, r6, CONFIG_SYS_ISA_IO@l
 
 /*
  * Set offset to base address for config registers.
  */
-#if defined(CFG_NS87308_BADDR_0x)
+#if defined(CONFIG_SYS_NS87308_BADDR_0x)
     addi    r4, r0, 0x0279
-#elif defined(CFG_NS87308_BADDR_10)
+#elif defined(CONFIG_SYS_NS87308_BADDR_10)
     addi    r4, r0, 0x015C
-#elif defined(CFG_NS87308_BADDR_11)
+#elif defined(CONFIG_SYS_NS87308_BADDR_11)
     addi    r4, r0, 0x002E
 #endif
     add     r6, r6, r4          /* add offset to base */
@@ -867,7 +867,7 @@ toggleError2:
     addi    r5, r0, SIO_LUNENABLE
     bl      .sio_bw
 
-    lis     r8, CFG_ISA_IO@h
+    lis     r8, CONFIG_SYS_ISA_IO@h
     ori     r8, r8, 0x0460
     li      r9, 0x03
     stb     r9, 0(r8)               /* select PMC2 register */
@@ -898,7 +898,7 @@ toggleError2:
 /*
  * Init COM1 for polled output
  */
-    lis     r8, CFG_ISA_IO@h
+    lis     r8, CONFIG_SYS_ISA_IO@h
     ori     r8, r8, 0x03f8
     li      r9, 0x00
     stb     r9, 1(r8)           /* int disabled */
@@ -972,8 +972,8 @@ waitEmpty1:
 /*
  * Get base addr of ISA I/O space
  */
-    lis     r3, CFG_ISA_IO@h
-    ori     r3, r3, CFG_ISA_IO@l
+    lis     r3, CONFIG_SYS_ISA_IO@h
+    ori     r3, r3, CONFIG_SYS_ISA_IO@l
 
     addi    r3, r3, 0x015C      /* adjust to superI/O 87308 base */
     or      r6, r3, r3          /* make a copy */
@@ -1076,7 +1076,7 @@ waitEmpty1:
  */
 .globl Printf
 Printf:
-    lis     r10, CFG_ISA_IO@h   /* COM1 port */
+    lis     r10, CONFIG_SYS_ISA_IO@h   /* COM1 port */
     ori     r10, r10, 0x03f8
 
 WaitChr:
@@ -1107,7 +1107,7 @@ OutHex4:
 OutHex:
     li      r9, 28              /* shift reg for 8 digits */
 OHstart:
-    lis     r10, CFG_ISA_IO@h   /* COM1 port */
+    lis     r10, CONFIG_SYS_ISA_IO@h   /* COM1 port */
     ori     r10, r10, 0x03f8
 OutDig:
     lbz     r0, 5(r10)          /* read link status */
@@ -1149,7 +1149,7 @@ OutDec:
     mullw   r10, r0, r6
     subf    r7, r10, r3
 
-    lis     r10, CFG_ISA_IO@h   /* COM1 port */
+    lis     r10, CONFIG_SYS_ISA_IO@h   /* COM1 port */
     ori     r10, r10, 0x03f8
 
     or.     r7, r7, r7
@@ -1198,7 +1198,7 @@ OutDec6:
  */
 .globl    OutChr
 OutChr:
-    lis     r10, CFG_ISA_IO@h   /* COM1 port */
+    lis     r10, CONFIG_SYS_ISA_IO@h   /* COM1 port */
     ori     r10, r10, 0x03f8
 
 OutChr1:
@@ -1216,7 +1216,7 @@ OutChr1:
 spdRead:
     mfspr   r26, 8              /* save link register */
 
-    lis     r30, CFG_ISA_IO@h
+    lis     r30, CONFIG_SYS_ISA_IO@h
     ori     r30, r30, 0x220     /* GPIO Port 1 */
     li      r7, 0x00
     li      r8, 0x100
diff --git a/board/eltec/bab7xx/bab7xx.c b/board/eltec/bab7xx/bab7xx.c
index 8c561161c..1f78f8d16 100644
--- a/board/eltec/bab7xx/bab7xx.c
+++ b/board/eltec/bab7xx/bab7xx.c
@@ -44,7 +44,7 @@ ulong bab7xx_get_bus_freq (void)
 	 * The GPIO Port 1 on BAB7xx reflects the bus speed.
 	 */
 	volatile struct GPIO *gpio =
-		(struct GPIO *) (CFG_ISA_IO + CFG_NS87308_GPIO_BASE);
+		(struct GPIO *) (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_GPIO_BASE);
 
 	unsigned char data = gpio->dta1;
 
@@ -87,7 +87,7 @@ int checkcpu (void)
 
 int checkboard (void)
 {
-#ifdef CFG_ADDRESS_MAP_A
+#ifdef CONFIG_SYS_ADDRESS_MAP_A
 	puts ("Board: ELTEC BAB7xx PReP\n");
 #else
 	puts ("Board: ELTEC BAB7xx CHRP\n");
@@ -126,16 +126,16 @@ long int dram_size (int board_type)
 
 	register unsigned long i, msar1, mear1, memSize;
 
-#if defined(CFG_MEMTEST)
+#if defined(CONFIG_SYS_MEMTEST)
 	register unsigned long reg;
 
 	printf ("Testing DRAM\n");
 
 	/* write each mem addr with it's address */
-	for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg += 4)
+	for (reg = CONFIG_SYS_MEMTEST_START; reg < CONFIG_SYS_MEMTEST_END; reg += 4)
 		*reg = reg;
 
-	for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg += 4) {
+	for (reg = CONFIG_SYS_MEMTEST_START; reg < CONFIG_SYS_MEMTEST_END; reg += 4) {
 		if (*reg != reg)
 			return -1;
 	}
diff --git a/board/eltec/bab7xx/flash.c b/board/eltec/bab7xx/flash.c
index 442dd0051..21ae09892 100644
--- a/board/eltec/bab7xx/flash.c
+++ b/board/eltec/bab7xx/flash.c
@@ -34,7 +34,7 @@
 #include <asm/processor.h>
 #include <asm/pci_io.h>
 
-flash_info_t    flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
 ulong flash_get_size (vu_long *addr, flash_info_t *info);
 static int write_word (flash_info_t *info, ulong dest, ulong data);
@@ -55,7 +55,7 @@ unsigned long flash_init (void)
     int i;
 
     /* Init: no FLASHes known */
-    for (i=0; i<CFG_MAX_FLASH_BANKS; ++i)
+    for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i)
     {
 	flash_info[i].flash_id = FLASH_UNKNOWN;
     }
@@ -96,8 +96,8 @@ unsigned long flash_init (void)
     if (size2 == 4*1024*1024)
     {
 	(void)flash_protect(FLAG_PROTECT_SET,
-		CFG_FLASH_BASE,
-		CFG_FLASH_BASE+monitor_flash_len-1,
+		CONFIG_SYS_FLASH_BASE,
+		CONFIG_SYS_FLASH_BASE+monitor_flash_len-1,
 		&flash_info[1]);
     }
 
@@ -370,7 +370,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
     last  = start;
     addr = (FLASH_WORD_SIZE *)(info->start[l_sect]);
     while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
-	if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+	if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 	    printf ("Timeout\n");
 	    return 1;
 	}
@@ -500,7 +500,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	    start = get_timer (0);
 	    while ((dest2[i] & (FLASH_WORD_SIZE)0x00800080) !=
 		   (data2[i] & (FLASH_WORD_SIZE)0x00800080)) {
-	      if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+	      if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 		return (1);
 	      }
 	    }
diff --git a/board/eltec/bab7xx/l2cache.c b/board/eltec/bab7xx/l2cache.c
index 1e7537745..787704f40 100644
--- a/board/eltec/bab7xx/l2cache.c
+++ b/board/eltec/bab7xx/l2cache.c
@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-#if defined(CFG_L2_BAB7xx)
+#if defined(CONFIG_SYS_L2_BAB7xx)
 
 #include <pci.h>
 #include <mpc106.h>
@@ -77,7 +77,7 @@ int l2_cache_enable (int l2control)
 	pci_write_config_dword (devbusfn, PCI_PICR2, reg32);
 
 	/* cache size */
-	if (*(volatile unsigned char *) (CFG_ISA_IO + 0x220) & 0x04)
+	if (*(volatile unsigned char *) (CONFIG_SYS_ISA_IO + 0x220) & 0x04)
 	{
 	    /* cache size is 512 KB */
 	    picr2CacheSize = PICR2_L2_SIZE_512K;
@@ -156,4 +156,4 @@ int l2_cache_enable (int l2control)
 
 /*----------------------------------------------------------------------------*/
 
-#endif /* (CFG_L2_BAB7xx) */
+#endif /* (CONFIG_SYS_L2_BAB7xx) */
diff --git a/board/eltec/bab7xx/misc.c b/board/eltec/bab7xx/misc.c
index 6a2480741..1c94a76d4 100644
--- a/board/eltec/bab7xx/misc.c
+++ b/board/eltec/bab7xx/misc.c
@@ -31,7 +31,7 @@
 #include "srom.h"
 
 /* imports  */
-extern char console_buffer[CFG_CBSIZE];
+extern char console_buffer[CONFIG_SYS_CBSIZE];
 extern int l2_cache_enable (int l2control);
 extern void *nvram_read (void *dest, const short src, size_t count);
 extern void nvram_write (short dest, const void *src, size_t count);
@@ -134,7 +134,7 @@ int misc_init_r (void)
 		SECOND_DEVICE, FIRST_BLOCK);
 
     /* read out current nvram shadow image */
-    nvram_read (buf, CFG_NV_SROM_COPY_ADDR, CFG_SROM_SIZE);
+    nvram_read (buf, CONFIG_SYS_NV_SROM_COPY_ADDR, CONFIG_SYS_SROM_SIZE);
 
     if (strcmp (eerev.magic, "ELTEC") != 0)
     {
@@ -162,8 +162,8 @@ int misc_init_r (void)
 	copyNv   = 1;  /* copy to nvram */
     }
 
-    if ((copyNv == 0) &&   (el_srom_checksum((u_char*)&eerev, CFG_SROM_SIZE) !=
-		el_srom_checksum((u_char*)buf, CFG_SROM_SIZE)))
+    if ((copyNv == 0) &&   (el_srom_checksum((u_char*)&eerev, CONFIG_SYS_SROM_SIZE) !=
+		el_srom_checksum((u_char*)buf, CONFIG_SYS_SROM_SIZE)))
     {
 	printf ("Invalid revision info copy in nvram !\n");
 	printf ("Press key:\n  <c> to copy current revision info to nvram.\n");
@@ -304,13 +304,13 @@ int misc_init_r (void)
 	    printf("OK\n\n");
 
 	/* write new values as shadow image to nvram */
-	nvram_write (CFG_NV_SROM_COPY_ADDR, (void *)&eerev, CFG_SROM_SIZE);
+	nvram_write (CONFIG_SYS_NV_SROM_COPY_ADDR, (void *)&eerev, CONFIG_SYS_SROM_SIZE);
 
     } /*if (initSrom) */
 
     /* copy current values as shadow image to nvram */
     if (initSrom == 0 && copyNv == 1)
-	nvram_write (CFG_NV_SROM_COPY_ADDR, (void *)&eerev, CFG_SROM_SIZE);
+	nvram_write (CONFIG_SYS_NV_SROM_COPY_ADDR, (void *)&eerev, CONFIG_SYS_SROM_SIZE);
 
     /* update environment */
     sprintf (buf, "%02x:%02x:%02x:%02x:%02x:%02x",
@@ -333,7 +333,7 @@ int misc_init_r (void)
    /*
     * L2 cache configuration
     */
-#if defined(CFG_L2_BAB7xx)
+#if defined(CONFIG_SYS_L2_BAB7xx)
     ptr = getenv("l2cache");
     if (*ptr == '0')
     {
diff --git a/board/eltec/bab7xx/pci.c b/board/eltec/bab7xx/pci.c
index edbd3ddf7..46e5a8bb1 100644
--- a/board/eltec/bab7xx/pci.c
+++ b/board/eltec/bab7xx/pci.c
@@ -43,41 +43,41 @@ void pci_init_board(void)
     hose->last_busno = 0xff;
 
     pci_set_region(hose->regions + 0,
-	CFG_PCI_MEMORY_BUS,
-	CFG_PCI_MEMORY_PHYS,
+	CONFIG_SYS_PCI_MEMORY_BUS,
+	CONFIG_SYS_PCI_MEMORY_PHYS,
     /*
     * Attention: pci_hose_phys_to_bus() failes in address compare,
-    * so we need (CFG_PCI_MEMORY_SIZE-1)
+    * so we need (CONFIG_SYS_PCI_MEMORY_SIZE-1)
     */
-	CFG_PCI_MEMORY_SIZE-1,
+	CONFIG_SYS_PCI_MEMORY_SIZE-1,
 	PCI_REGION_MEM | PCI_REGION_MEMORY);
 
     /* PCI memory space */
     pci_set_region(hose->regions + 1,
-	CFG_PCI_MEM_BUS,
-	CFG_PCI_MEM_PHYS,
-	CFG_PCI_MEM_SIZE,
+	CONFIG_SYS_PCI_MEM_BUS,
+	CONFIG_SYS_PCI_MEM_PHYS,
+	CONFIG_SYS_PCI_MEM_SIZE,
 	PCI_REGION_MEM);
 
     /* ISA/PCI memory space */
     pci_set_region(hose->regions + 2,
-	CFG_ISA_MEM_BUS,
-	CFG_ISA_MEM_PHYS,
-	CFG_ISA_MEM_SIZE,
+	CONFIG_SYS_ISA_MEM_BUS,
+	CONFIG_SYS_ISA_MEM_PHYS,
+	CONFIG_SYS_ISA_MEM_SIZE,
 	PCI_REGION_MEM);
 
     /* PCI I/O space */
     pci_set_region(hose->regions + 3,
-	CFG_PCI_IO_BUS,
-	CFG_PCI_IO_PHYS,
-	CFG_PCI_IO_SIZE,
+	CONFIG_SYS_PCI_IO_BUS,
+	CONFIG_SYS_PCI_IO_PHYS,
+	CONFIG_SYS_PCI_IO_SIZE,
 	PCI_REGION_IO);
 
     /* ISA/PCI I/O space */
     pci_set_region(hose->regions + 4,
-	CFG_ISA_IO_BUS,
-	CFG_ISA_IO_PHYS,
-	CFG_ISA_IO_SIZE,
+	CONFIG_SYS_ISA_IO_BUS,
+	CONFIG_SYS_ISA_IO_PHYS,
+	CONFIG_SYS_ISA_IO_SIZE,
 	PCI_REGION_IO);
 
     hose->region_count = 5;
diff --git a/board/eltec/bab7xx/srom.h b/board/eltec/bab7xx/srom.h
index c18ab9164..504b742a6 100644
--- a/board/eltec/bab7xx/srom.h
+++ b/board/eltec/bab7xx/srom.h
@@ -40,8 +40,8 @@
 #define SROM_SHORT(pX)          (*(u8 *)(pX) | *((u8 *)(pX)+1) << 8)
 
 /* bab7xx ELTEC srom */
-#define I2C_BUS_DAT             (CFG_ISA_IO + 0x220)
-#define I2C_BUS_DIR             (CFG_ISA_IO + 0x221)
+#define I2C_BUS_DAT             (CONFIG_SYS_ISA_IO + 0x220)
+#define I2C_BUS_DIR             (CONFIG_SYS_ISA_IO + 0x221)
 
 /* srom at mpc107 */
 #define MPC107_I2CADDR          (mpc107_eumb_addr + 0x3000)     /* address      */
diff --git a/board/eltec/elppc/asm_init.S b/board/eltec/elppc/asm_init.S
index 1b8d399ed..8cbe9d88e 100644
--- a/board/eltec/elppc/asm_init.S
+++ b/board/eltec/elppc/asm_init.S
@@ -272,15 +272,15 @@ memStartWait:
  * set LEDs first time
  */
     li      r3, 0x1
-    lis     r30, CFG_USR_LED_BASE@h
+    lis     r30, CONFIG_SYS_USR_LED_BASE@h
     stb     r3, 2(r30)
     sync
 
 /*
  * init COM1 for polled output
  */
-    lis     r8, CFG_NS16550_COM1@h  /* COM1 base address*/
-    ori     r8, r8, CFG_NS16550_COM1@l
+    lis     r8, CONFIG_SYS_NS16550_COM1@h  /* COM1 base address*/
+    ori     r8, r8, CONFIG_SYS_NS16550_COM1@l
     li      r9, 0x00
     stb     r9, 1(r8)           /* int disabled */
     eieio
@@ -290,10 +290,10 @@ memStartWait:
     li      r9, 0x80
     stb     r9, 3(r8)           /* link ctrl */
     eieio
-    li      r9, (CFG_NS16550_CLK / 16 / CONFIG_BAUDRATE)
+    li      r9, (CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE)
     stb     r9, 0(r8)           /* baud rate (LSB)*/
     eieio
-    li      r9, ((CFG_NS16550_CLK / 16 / CONFIG_BAUDRATE) >> 8)
+    li      r9, ((CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE) >> 8)
     stb     r9, 1(r8)           /* baud rate (MSB) */
     eieio
     li      r9, 0x07
@@ -589,7 +589,7 @@ memStartWait_1:
  * set LEDs end
  */
     li      r3, 0xf
-    lis     r30, CFG_USR_LED_BASE@h
+    lis     r30, CONFIG_SYS_USR_LED_BASE@h
     stb     r3, 2(r30)
     sync
 
@@ -602,8 +602,8 @@ memStartWait_1:
  */
 
 Printf:
-    lis     r10, CFG_NS16550_COM1@h /* COM1 base address*/
-    ori     r10, r10, CFG_NS16550_COM1@l
+    lis     r10, CONFIG_SYS_NS16550_COM1@h /* COM1 base address*/
+    ori     r10, r10, CONFIG_SYS_NS16550_COM1@l
 WaitChr:
     lbz     r0, 5(r10)          /* read link status */
     eieio
@@ -622,8 +622,8 @@ WaitChr:
  * print a char to COM1 in polling mode (r10=COM1 port, r3=char)
  */
 OutChr:
-    lis     r10, CFG_NS16550_COM1@h /* COM1 base address*/
-    ori     r10, r10, CFG_NS16550_COM1@l
+    lis     r10, CONFIG_SYS_NS16550_COM1@h /* COM1 base address*/
+    ori     r10, r10, CONFIG_SYS_NS16550_COM1@l
 OutChr1:
     lbz     r0, 5(r10)          /* read link status */
     eieio
@@ -645,8 +645,8 @@ OutHex4:
 OutHex:
     li      r9, 28              /* shift reg for 8 digits */
 OHstart:
-    lis     r10, CFG_NS16550_COM1@h /* COM1 base address*/
-    ori     r10, r10, CFG_NS16550_COM1@l
+    lis     r10, CONFIG_SYS_NS16550_COM1@h /* COM1 base address*/
+    ori     r10, r10, CONFIG_SYS_NS16550_COM1@l
 OutDig:
     lbz     r0, 0(r29)          /* slow down dummy read */
     lbz     r0, 5(r10)          /* read link status */
@@ -685,8 +685,8 @@ OutDec:
     divwu   r0, r3, r6          /* r0 = r3 / 10, r7 = r3 mod 10 */
     mullw   r10, r0, r6
     subf    r7, r10, r3
-    lis     r10, CFG_NS16550_COM1@h /* COM1 base address*/
-    ori     r10, r10, CFG_NS16550_COM1@l
+    lis     r10, CONFIG_SYS_NS16550_COM1@h /* COM1 base address*/
+    ori     r10, r10, CONFIG_SYS_NS16550_COM1@l
     or.     r7, r7, r7
     bne     noblank1
     li      r3, 0x20
diff --git a/board/eltec/elppc/elppc.c b/board/eltec/elppc/elppc.c
index d3ac2784a..e73c712cb 100644
--- a/board/eltec/elppc/elppc.c
+++ b/board/eltec/elppc/elppc.c
@@ -68,16 +68,16 @@ long int dram_size (int board_type)
 
 	register unsigned long i, msar1, mear1, memSize;
 
-#if defined(CFG_MEMTEST)
+#if defined(CONFIG_SYS_MEMTEST)
 	register unsigned long reg;
 
 	printf ("Testing DRAM\n");
 
 	/* write each mem addr with it's address */
-	for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg += 4)
+	for (reg = CONFIG_SYS_MEMTEST_START; reg < CONFIG_SYS_MEMTEST_END; reg += 4)
 		*reg = reg;
 
-	for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg += 4) {
+	for (reg = CONFIG_SYS_MEMTEST_START; reg < CONFIG_SYS_MEMTEST_END; reg += 4) {
 		if (*reg != reg)
 			return -1;
 	}
diff --git a/board/eltec/elppc/flash.c b/board/eltec/elppc/flash.c
index 442dd0051..21ae09892 100644
--- a/board/eltec/elppc/flash.c
+++ b/board/eltec/elppc/flash.c
@@ -34,7 +34,7 @@
 #include <asm/processor.h>
 #include <asm/pci_io.h>
 
-flash_info_t    flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
 ulong flash_get_size (vu_long *addr, flash_info_t *info);
 static int write_word (flash_info_t *info, ulong dest, ulong data);
@@ -55,7 +55,7 @@ unsigned long flash_init (void)
     int i;
 
     /* Init: no FLASHes known */
-    for (i=0; i<CFG_MAX_FLASH_BANKS; ++i)
+    for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i)
     {
 	flash_info[i].flash_id = FLASH_UNKNOWN;
     }
@@ -96,8 +96,8 @@ unsigned long flash_init (void)
     if (size2 == 4*1024*1024)
     {
 	(void)flash_protect(FLAG_PROTECT_SET,
-		CFG_FLASH_BASE,
-		CFG_FLASH_BASE+monitor_flash_len-1,
+		CONFIG_SYS_FLASH_BASE,
+		CONFIG_SYS_FLASH_BASE+monitor_flash_len-1,
 		&flash_info[1]);
     }
 
@@ -370,7 +370,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
     last  = start;
     addr = (FLASH_WORD_SIZE *)(info->start[l_sect]);
     while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
-	if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+	if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 	    printf ("Timeout\n");
 	    return 1;
 	}
@@ -500,7 +500,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	    start = get_timer (0);
 	    while ((dest2[i] & (FLASH_WORD_SIZE)0x00800080) !=
 		   (data2[i] & (FLASH_WORD_SIZE)0x00800080)) {
-	      if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+	      if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 		return (1);
 	      }
 	    }
diff --git a/board/eltec/elppc/misc.c b/board/eltec/elppc/misc.c
index 5e3a81c6e..cbaf10b7e 100644
--- a/board/eltec/elppc/misc.c
+++ b/board/eltec/elppc/misc.c
@@ -29,7 +29,7 @@
 #include "srom.h"
 
 /* imports  */
-extern char console_buffer[CFG_CBSIZE];
+extern char console_buffer[CONFIG_SYS_CBSIZE];
 extern int l2_cache_enable (int l2control);
 extern int eepro100_write_eeprom (struct eth_device *dev, int location,
 				  int addr_len, unsigned short data);
@@ -95,7 +95,7 @@ int misc_init_r (void)
 			  SECOND_DEVICE, FIRST_BLOCK);
 
 	/* read out current nvram shadow image */
-	nvram_read (buf, CFG_NV_SROM_COPY_ADDR, CFG_SROM_SIZE);
+	nvram_read (buf, CONFIG_SYS_NV_SROM_COPY_ADDR, CONFIG_SYS_SROM_SIZE);
 
 	if (strcmp (eerev.magic, "ELTEC") != 0) {
 		/* srom is not initialized -> create a default revision info */
@@ -124,8 +124,8 @@ int misc_init_r (void)
 	}
 
 	if ((copyNv == 0)
-	    && (el_srom_checksum ((u_char *) & eerev, CFG_SROM_SIZE) !=
-		el_srom_checksum ((u_char *) buf, CFG_SROM_SIZE))) {
+	    && (el_srom_checksum ((u_char *) & eerev, CONFIG_SYS_SROM_SIZE) !=
+		el_srom_checksum ((u_char *) buf, CONFIG_SYS_SROM_SIZE))) {
 		printf ("Invalid revision info copy in nvram !\n");
 		printf ("Press key:\n  <c> to copy current revision info to nvram.\n");
 		printf ("  <r> to reenter revision info.\n");
@@ -232,16 +232,16 @@ int misc_init_r (void)
 			printf ("OK\n\n");
 
 		/* write new values as shadow image to nvram */
-		nvram_write (CFG_NV_SROM_COPY_ADDR, (void *) &eerev,
-			     CFG_SROM_SIZE);
+		nvram_write (CONFIG_SYS_NV_SROM_COPY_ADDR, (void *) &eerev,
+			     CONFIG_SYS_SROM_SIZE);
 
 	}
 
 	/*if (initSrom) */
 	/* copy current values as shadow image to nvram */
 	if (initSrom == 0 && copyNv == 1)
-		nvram_write (CFG_NV_SROM_COPY_ADDR, (void *) &eerev,
-			     CFG_SROM_SIZE);
+		nvram_write (CONFIG_SYS_NV_SROM_COPY_ADDR, (void *) &eerev,
+			     CONFIG_SYS_SROM_SIZE);
 
 	/* update environment */
 	sprintf (buf, "%02x:%02x:%02x:%02x:%02x:%02x",
diff --git a/board/eltec/elppc/pci.c b/board/eltec/elppc/pci.c
index 5b115ea61..bf133b77d 100644
--- a/board/eltec/elppc/pci.c
+++ b/board/eltec/elppc/pci.c
@@ -42,37 +42,37 @@ void pci_init_board(void)
     hose->last_busno = 0xff;
 
     pci_set_region(hose->regions + 0,
-	CFG_PCI_MEMORY_BUS,
-	CFG_PCI_MEMORY_PHYS,
-	CFG_PCI_MEMORY_SIZE,
+	CONFIG_SYS_PCI_MEMORY_BUS,
+	CONFIG_SYS_PCI_MEMORY_PHYS,
+	CONFIG_SYS_PCI_MEMORY_SIZE,
 	PCI_REGION_MEM | PCI_REGION_MEMORY);
 
     /* PCI memory space */
     pci_set_region(hose->regions + 1,
-	CFG_PCI_MEM_BUS,
-	CFG_PCI_MEM_PHYS,
-	CFG_PCI_MEM_SIZE,
+	CONFIG_SYS_PCI_MEM_BUS,
+	CONFIG_SYS_PCI_MEM_PHYS,
+	CONFIG_SYS_PCI_MEM_SIZE,
 	PCI_REGION_MEM);
 
     /* ISA/PCI memory space */
     pci_set_region(hose->regions + 2,
-	CFG_ISA_MEM_BUS,
-	CFG_ISA_MEM_PHYS,
-	CFG_ISA_MEM_SIZE,
+	CONFIG_SYS_ISA_MEM_BUS,
+	CONFIG_SYS_ISA_MEM_PHYS,
+	CONFIG_SYS_ISA_MEM_SIZE,
 	PCI_REGION_MEM);
 
     /* PCI I/O space */
     pci_set_region(hose->regions + 3,
-	CFG_PCI_IO_BUS,
-	CFG_PCI_IO_PHYS,
-	CFG_PCI_IO_SIZE,
+	CONFIG_SYS_PCI_IO_BUS,
+	CONFIG_SYS_PCI_IO_PHYS,
+	CONFIG_SYS_PCI_IO_SIZE,
 	PCI_REGION_IO);
 
     /* ISA/PCI I/O space */
     pci_set_region(hose->regions + 4,
-	CFG_ISA_IO_BUS,
-	CFG_ISA_IO_PHYS,
-	CFG_ISA_IO_SIZE,
+	CONFIG_SYS_ISA_IO_BUS,
+	CONFIG_SYS_ISA_IO_PHYS,
+	CONFIG_SYS_ISA_IO_SIZE,
 	PCI_REGION_IO);
 
     hose->region_count = 5;
diff --git a/board/eltec/elppc/srom.h b/board/eltec/elppc/srom.h
index c18ab9164..504b742a6 100644
--- a/board/eltec/elppc/srom.h
+++ b/board/eltec/elppc/srom.h
@@ -40,8 +40,8 @@
 #define SROM_SHORT(pX)          (*(u8 *)(pX) | *((u8 *)(pX)+1) << 8)
 
 /* bab7xx ELTEC srom */
-#define I2C_BUS_DAT             (CFG_ISA_IO + 0x220)
-#define I2C_BUS_DIR             (CFG_ISA_IO + 0x221)
+#define I2C_BUS_DAT             (CONFIG_SYS_ISA_IO + 0x220)
+#define I2C_BUS_DIR             (CONFIG_SYS_ISA_IO + 0x221)
 
 /* srom at mpc107 */
 #define MPC107_I2CADDR          (mpc107_eumb_addr + 0x3000)     /* address      */
diff --git a/board/eltec/mhpc/flash.c b/board/eltec/mhpc/flash.c
index 4cc66a973..2fbdb2771 100644
--- a/board/eltec/mhpc/flash.c
+++ b/board/eltec/mhpc/flash.c
@@ -25,7 +25,7 @@
 #include <mpc8xx.h>
 #include <linux/byteorder/swab.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /*-----------------------------------------------------------------------
  * Protection Flags:
@@ -62,13 +62,13 @@ static void  flash_get_offsets (ulong base, flash_info_t *info);
 
 unsigned long flash_init (void)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size_b0;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -81,18 +81,18 @@ unsigned long flash_init (void)
 	}
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V;
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V;
 
 	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size((FPW *)CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((FPW *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	/* monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    CFG_FLASH_BASE,
-			    CFG_FLASH_BASE+monitor_flash_len-1,
+			    CONFIG_SYS_FLASH_BASE,
+			    CONFIG_SYS_FLASH_BASE+monitor_flash_len-1,
 			    &flash_info[0]);
 
 	flash_info[0].size = size_b0;
@@ -203,10 +203,10 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = (FPW)0xFF00FF00;      /* restore read mode */
@@ -277,7 +277,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 			udelay (1000);
 
 			while (((status = SWAP(*addr)) & (FPW)0x00800080) != (FPW)0x00800080) {
-				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+				if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = (FPW)0xB000B000; /* suspend erase */
 					*addr = (FPW)0xFF00FF00; /* reset to read mode */
@@ -419,7 +419,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data)
 	start = get_timer (0);
 
 	while (((status = SWAP(*addr)) & (FPW)0x00800080) != (FPW)0x00800080) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW)0xFF00FF00;	/* restore read mode */
 			return (1);
 		}
diff --git a/board/eltec/mhpc/mhpc.c b/board/eltec/mhpc/mhpc.c
index 3666791e9..7cca6b28c 100644
--- a/board/eltec/mhpc/mhpc.c
+++ b/board/eltec/mhpc/mhpc.c
@@ -36,7 +36,7 @@
 #include <video_fb.h>
 
 /* imports from common/main.c */
-extern char console_buffer[CFG_CBSIZE];
+extern char console_buffer[CONFIG_SYS_CBSIZE];
 
 extern void eeprom_init (void);
 extern int eeprom_read (unsigned dev_addr, unsigned offset,
@@ -105,7 +105,7 @@ static const unsigned int sdram_table[] = {
 
 int board_early_init_f (void)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	volatile cpm8xx_t *cp = &(im->im_cpm);
 	volatile iop8xx_t *ip = (iop8xx_t *) & (im->im_ioport);
 
@@ -160,7 +160,7 @@ int misc_init_r (void)
 	int i;
 
 	/* check revision data */
-	eeprom_read (CFG_I2C_EEPROM_ADDR, 480, (uchar *) &mhpcRevInfo, 32);
+	eeprom_read (CONFIG_SYS_I2C_EEPROM_ADDR, 480, (uchar *) &mhpcRevInfo, 32);
 
 	if (strncmp ((char *) &mhpcRevInfo.board[2], "MHPC", 4) != 0) {
 		printf ("Enter revision number (0-9): %c  ",
@@ -228,7 +228,7 @@ int misc_init_r (void)
 		}
 
 		/* setup new revision data */
-		eeprom_write (CFG_I2C_EEPROM_ADDR, 480, (uchar *) &mhpcRevInfo,
+		eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, 480, (uchar *) &mhpcRevInfo,
 			      32);
 	}
 
@@ -253,13 +253,13 @@ int misc_init_r (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	upmconfig (UPMA, (uint *) sdram_table,
 		   sizeof (sdram_table) / sizeof (uint));
 
-	memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR & (~(MAMR_PTAE));	/* no refresh yet */
 	memctl->memc_mbmr = MBMR_GPL_B4DIS;	/* should this be mamr? - NTL */
 	memctl->memc_mptpr = MPTPR_PTP_DIV64;
 	memctl->memc_mar = 0x00008800;
@@ -267,15 +267,15 @@ phys_size_t initdram (int board_type)
 	/*
 	 * Map controller SDRAM bank 0
 	 */
-	memctl->memc_or1 = CFG_OR1_PRELIM;
-	memctl->memc_br1 = CFG_BR1_PRELIM;
+	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
 	udelay (200);
 
 	/*
 	 * Map controller SDRAM bank 1
 	 */
-	memctl->memc_or2 = CFG_OR2;
-	memctl->memc_br2 = CFG_BR2;
+	memctl->memc_or2 = CONFIG_SYS_OR2;
+	memctl->memc_br2 = CONFIG_SYS_BR2;
 
 	/*
 	 * Perform SDRAM initializsation sequence
@@ -419,7 +419,7 @@ void *video_hw_init (void)
 {
 	unsigned int clut = 0;
 	unsigned char *penv;
-	immap_t *immr = (immap_t *) CFG_IMMR;
+	immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
 
 	/* enable video only on CLUT value */
 	if ((penv = (uchar *)getenv ("clut")) != NULL)
@@ -470,7 +470,7 @@ void video_set_lut (unsigned int index,
 		    unsigned char r, unsigned char g, unsigned char b)
 {
 	unsigned int lum;
-	unsigned short *pLut = (unsigned short *) (CFG_IMMR + 0x0e00);
+	unsigned short *pLut = (unsigned short *) (CONFIG_SYS_IMMR + 0x0e00);
 
 	/* 16 bit lut values, 12 bit used, xxxx BBGG RRii iiii */
 	/* y = 0.299*R + 0.587*G + 0.114*B */