am33xx: support board specific ddr settings

Move the hardcoded ddr2/ddr3 settings for the ti boards to board code,
so other boards can use different types/timings.

Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com>
[trini: Make apply with rtc32k_enable() in the file]
Signed-off-by: Tom Rini <trini@ti.com>

2 files changed, 15 insertions, 104 deletions

diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c
index b2d7c0d95..01e3a5204 100644
--- a/arch/arm/cpu/armv7/am33xx/emif4.c
+++ b/arch/arm/cpu/armv7/am33xx/emif4.c
@@ -47,78 +47,6 @@ void dram_init_banksize(void)
 static struct vtp_reg *vtpreg = (struct vtp_reg *)VTP0_CTRL_ADDR;
 static struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR;
 
-static const struct ddr_data ddr2_data = {
-	.datardsratio0 = ((DDR2_RD_DQS<<30)|(DDR2_RD_DQS<<20)
-				|(DDR2_RD_DQS<<10)|(DDR2_RD_DQS<<0)),
-	.datawdsratio0 = ((DDR2_WR_DQS<<30)|(DDR2_WR_DQS<<20)
-				|(DDR2_WR_DQS<<10)|(DDR2_WR_DQS<<0)),
-	.datawiratio0 = ((DDR2_PHY_WRLVL<<30)|(DDR2_PHY_WRLVL<<20)
-				|(DDR2_PHY_WRLVL<<10)|(DDR2_PHY_WRLVL<<0)),
-	.datagiratio0 = ((DDR2_PHY_GATELVL<<30)|(DDR2_PHY_GATELVL<<20)
-				|(DDR2_PHY_GATELVL<<10)|(DDR2_PHY_GATELVL<<0)),
-	.datafwsratio0 = ((DDR2_PHY_FIFO_WE<<30)|(DDR2_PHY_FIFO_WE<<20)
-				|(DDR2_PHY_FIFO_WE<<10)|(DDR2_PHY_FIFO_WE<<0)),
-	.datawrsratio0 = ((DDR2_PHY_WR_DATA<<30)|(DDR2_PHY_WR_DATA<<20)
-				|(DDR2_PHY_WR_DATA<<10)|(DDR2_PHY_WR_DATA<<0)),
-	.datauserank0delay = DDR2_PHY_RANK0_DELAY,
-	.datadldiff0 = PHY_DLL_LOCK_DIFF,
-};
-
-static const struct cmd_control ddr2_cmd_ctrl_data = {
-	.cmd0csratio = DDR2_RATIO,
-	.cmd0dldiff = DDR2_DLL_LOCK_DIFF,
-	.cmd0iclkout = DDR2_INVERT_CLKOUT,
-
-	.cmd1csratio = DDR2_RATIO,
-	.cmd1dldiff = DDR2_DLL_LOCK_DIFF,
-	.cmd1iclkout = DDR2_INVERT_CLKOUT,
-
-	.cmd2csratio = DDR2_RATIO,
-	.cmd2dldiff = DDR2_DLL_LOCK_DIFF,
-	.cmd2iclkout = DDR2_INVERT_CLKOUT,
-};
-
-static const struct emif_regs ddr2_emif_reg_data = {
-	.sdram_config = DDR2_EMIF_SDCFG,
-	.ref_ctrl = DDR2_EMIF_SDREF,
-	.sdram_tim1 = DDR2_EMIF_TIM1,
-	.sdram_tim2 = DDR2_EMIF_TIM2,
-	.sdram_tim3 = DDR2_EMIF_TIM3,
-	.emif_ddr_phy_ctlr_1 = DDR2_EMIF_READ_LATENCY,
-};
-
-static const struct ddr_data ddr3_data = {
-	.datardsratio0 = DDR3_RD_DQS,
-	.datawdsratio0 = DDR3_WR_DQS,
-	.datafwsratio0 = DDR3_PHY_FIFO_WE,
-	.datawrsratio0 = DDR3_PHY_WR_DATA,
-	.datadldiff0 = PHY_DLL_LOCK_DIFF,
-};
-
-static const struct cmd_control ddr3_cmd_ctrl_data = {
-	.cmd0csratio = DDR3_RATIO,
-	.cmd0dldiff = DDR3_DLL_LOCK_DIFF,
-	.cmd0iclkout = DDR3_INVERT_CLKOUT,
-
-	.cmd1csratio = DDR3_RATIO,
-	.cmd1dldiff = DDR3_DLL_LOCK_DIFF,
-	.cmd1iclkout = DDR3_INVERT_CLKOUT,
-
-	.cmd2csratio = DDR3_RATIO,
-	.cmd2dldiff = DDR3_DLL_LOCK_DIFF,
-	.cmd2iclkout = DDR3_INVERT_CLKOUT,
-};
-
-static struct emif_regs ddr3_emif_reg_data = {
-	.sdram_config = DDR3_EMIF_SDCFG,
-	.ref_ctrl = DDR3_EMIF_SDREF,
-	.sdram_tim1 = DDR3_EMIF_TIM1,
-	.sdram_tim2 = DDR3_EMIF_TIM2,
-	.sdram_tim3 = DDR3_EMIF_TIM3,
-	.zq_config = DDR3_ZQ_CFG,
-	.emif_ddr_phy_ctlr_1 = DDR3_EMIF_READ_LATENCY,
-};
-
 static void config_vtp(void)
 {
 	writel(readl(&vtpreg->vtp0ctrlreg) | VTP_CTRL_ENABLE,
@@ -134,46 +62,26 @@ static void config_vtp(void)
 		;
 }
 
-void config_ddr(short ddr_type)
+void config_ddr(unsigned int pll, unsigned int ioctrl,
+		const struct ddr_data *data, const struct cmd_control *ctrl,
+		const struct emif_regs *regs)
 {
-	int ddr_pll, ioctrl_val;
-	const struct emif_regs *emif_regs;
-	const struct ddr_data *ddr_data;
-	const struct cmd_control *cmd_ctrl_data;
-
-	if (ddr_type == EMIF_REG_SDRAM_TYPE_DDR2) {
-		ddr_pll = 266;
-		cmd_ctrl_data = &ddr2_cmd_ctrl_data;
-		ddr_data = &ddr2_data;
-		ioctrl_val = DDR2_IOCTRL_VALUE;
-		emif_regs = &ddr2_emif_reg_data;
-	} else if (ddr_type == EMIF_REG_SDRAM_TYPE_DDR3) {
-		ddr_pll = 303;
-		cmd_ctrl_data = &ddr3_cmd_ctrl_data;
-		ddr_data = &ddr3_data;
-		ioctrl_val = DDR3_IOCTRL_VALUE;
-		emif_regs = &ddr3_emif_reg_data;
-	} else {
-		puts("Unknown memory type");
-		hang();
-	}
-
 	enable_emif_clocks();
-	ddr_pll_config(ddr_pll);
+	ddr_pll_config(pll);
 	config_vtp();
-	config_cmd_ctrl(cmd_ctrl_data);
+	config_cmd_ctrl(ctrl);
 
-	config_ddr_data(0, ddr_data);
-	config_ddr_data(1, ddr_data);
+	config_ddr_data(0, data);
+	config_ddr_data(1, data);
 
-	config_io_ctrl(ioctrl_val);
+	config_io_ctrl(ioctrl);
 
 	/* Set CKE to be controlled by EMIF/DDR PHY */
 	writel(DDR_CKE_CTRL_NORMAL, &ddrctrl->ddrckectrl);
 
 	/* Program EMIF instance */
-	config_ddr_phy(emif_regs);
-	set_sdram_timings(emif_regs);
-	config_sdram(emif_regs);
+	config_ddr_phy(regs);
+	set_sdram_timings(regs);
+	config_sdram(regs);
 }
 #endif
diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
index 6b22c45f7..40a13e9d8 100644
--- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h
+++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
@@ -29,6 +29,7 @@
 #define PHY_DLL_LOCK_DIFF	0x0
 #define DDR_CKE_CTRL_NORMAL	0x1
 
+/* Micron MT47H128M16RT-25E */
 #define DDR2_EMIF_READ_LATENCY	0x100005	/* Enable Dynamic Power Down */
 #define DDR2_EMIF_TIM1		0x0666B3C9
 #define DDR2_EMIF_TIM2		0x243631CA
@@ -189,6 +190,8 @@ struct ddr_ctrl {
 	unsigned int ddrckectrl;
 };
 
-void config_ddr(short ddr_type);
+void config_ddr(unsigned int pll, unsigned int ioctrl,
+		const struct ddr_data *data, const struct cmd_control *ctrl,
+		const struct emif_regs *regs);
 
 #endif  /* _DDR_DEFS_H */