Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm: (167 commits)
  OMAP4/5: Change omap4_sdp, omap4_panda, omap5_evm maintainer
  ARM: omap3: Add CONFIG_SPL_BOARD_INIT for CONFIG_SPL_MMC_SUPPORT
  ARM: omap3: Set SPL stack size to 8KB, image to 54KB.
  arm, omap3: fix warm reset serial output on OMAP36xx/AM/DM37xx
  OMAP4: Set fdt_high for OMAP4 devices to enable booting with Device Tree
  omap4: do not enable auxiliary cores
  omap4: do not enable fs-usb module
  omap4: panda: disable uart2 pads during boot
  igep00x0: change mpurate from 500 to auto
  igep00x0: enable the use of a plain text file
  tegra2: trivially enable 13 mhz crystal frequency
  tegra: Enable keyboard for Seaboard
  tegra: Switch on console mux and use environment for console
  tegra: Add tegra keyboard driver
  tegra: fdt: Add keyboard definitions for Seaboard
  tegra: fdt: Add keyboard controller definition
  tegra: Add keyboard support to funcmux
  input: Add support for keyboard matrix decoding from an fdt
  input: Add generic keyboard input handler
  input: Add linux/input.h for key code support
  fdt: Add fdtdec functions to read byte array
  tegra: Enable LP0 on Seaboard
  tegra: fdt: Add EMC data for Tegra2 Seaboard
  tegra: i2c: Add function to find DVC bus
  fdt: tegra: Add EMC node to device tree
  tegra: Add EMC settings for Seaboard
  tegra: Turn off power detect in board init
  tegra: Set up warmboot code on Nvidia boards
  tegra: Setup PMC scratch info from ap20 setup
  tegra: Add warmboot implementation
  tegra: Set up PMU for Nvidia boards
  tegra: Add PMU to manage power supplies
  tegra: Add EMC support for optimal memory timings
  tegra: Add header file for APB_MISC register
  tegra: Add tegra_get_chip_type() to detect SKU
  tegra: Add flow, gp_padctl, fuse, sdram headers
  tegra: Add crypto library for warmboot code
  tegra: Add functions to access low-level Osc/PLL details
  tegra: Move ap20.h header into arch location
  Add AES crypto library
  i2c: Add TPS6586X driver
  Add abs() macro to return absolute value
  fdt: Add function to return next compatible subnode
  fdt: Add function to locate an array in the device tree
  i.MX28: Avoid redefining serial_put[cs]()
  i.MX28: Check if WP detection is implemented at all
  i.MX28: Add battery boot components to SPL
  i.MX28: Reorder battery status functions in SPL
  i.MX28: Add LRADC init to i.MX28 SPL
  i.MX28: Add LRADC register definitions
  i.MX28: Shut down the LCD controller before reset
  i.MX28: Add LCDIF register definitions
  i.MX28: Implement boot pads sampling and reporting
  i.MX28: Improve passing of data from SPL to U-Boot
  M28EVK: Add SD update command
  M28EVK: Implement support for new board V2.0
  FEC: Abstract out register setup
  MX5: PAD_CTL_DRV_VOT_LOW and PAD_CTL_DRV_VOT_HIGH exchanged
  i.MX28: Add delay after CPU bypass is cleared
  spi: mxs: Allow other chip selects to work
  spi: mxs: Introduce spi_cs_is_valid()
  mx53loco: Remove unneeded gpio_set_value()
  mx53loco: Add CONFIG_REVISION_TAG
  mx53loco: Turn on VUSB regulator
  mx53loco: Add mc34708 support and set mx53 frequency at 1GHz
  pmic: dialog: Avoid name conflicts
  imx: Add u-boot.imx as target for ARM9 i.MX SOCs
  i.MX2: Include asm/types.h in arch-mx25/imx-regs.h
  imx: usb: There is no such register
  i.MX25: usb: Set PORTSCx register
  imx: nand: Support flash based BBT
  i.MX25: This architecture has a GPIO4 too
  i.MX25: esdhc: Add mxc_get_clock infrastructure
  i.MX6: mx6q_sabrelite: add SATA bindings
  i.MX6: add enable_sata_clock()
  i.MX6: Add ANATOP regulator init
  mx28evk: add NAND support
  USB: ehci-mx6: Fix broken IO access
  M28: Scan only first 512 MB of DRAM to avoid memory wraparound
  Revert "i.MX28: Enable additional DRAM address bits"
  M28: Enable FDT support
  mx53loco: Add support for 1GHz operation for DA9053-based boards
  mx53loco: Allow to print CPU information at a later stage
  mx5: Add clock config interface
  imx-common: Factor out get_ahb_clk()
  i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow
  mx31pdk: Allow booting a zImage kernel
  mx6qarm2: Allow booting a zImage kernel
  mx6qsabrelite: Allow booting a zImage kernel
  mx28evk: Allow booting a zImage kernel
  m28evk: Allow to booting a dt kernel
  mx28evk: Allow to booting a dt kernel
  mx6qsabrelite: No need to set the direction for GPIO3_23 again
  pmic: Add support for the Dialog DA9053 PMIC
  MX53: mx53loco: Add SATA support
  MX53: Add support to ESG ima3 board
  SATA: add driver for MX5 / MX6 SOCs
  MX53: add function to set SATA clock to internal
  SATA: check for return value from sata functions
  MX5: Add definitions for SATA controller
  NET: fec_mxc.c: Add a way to disable auto negotiation
  Define UART4 and UART5 base addresses
  EXYNOS: Change bits per pixel value proper for u-boot.
  EXYNOS: support TRATS board display function
  LCD: support S6E8AX0 amoled driver based on EXYNOS MIPI DSI
  EXYNOS: support EXYNOS MIPI DSI interface driver.
  EXYNOS: support EXYNOS framebuffer and FIMD display drivers.
  LCD: add data structure for EXYNOS display driver
  EXYNOS: add LCD and MIPI DSI clock interface.
  EXYNOS: definitions of system resgister and power management registers.
  SMDK5250: fix compiler warning
  misc:pmic:samsung Convert TRATS target to use MAX8997 instead of MAX8998
  misc:pmic:max8997 MAX8997 support for PMIC driver
  TRATS: modify the trats's configuration
  ARM: Exynos4: ADC: Universal_C210: Enable LDO4 power line for ADC measurement
  EXYNOS: Rename exynos5_tzpc structure to exynos_tzpc
  arm: ea20: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT
  arm: cam_enc_4xx: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT
  cm-t35: add I2C multi-bus support
  include/configs: Remove CONFIG_SYS_64BIT_STRTOUL
  include/configs: Remove CONFIG_SYS_64BIT_VSPRINTF
  omap3: Introduce weak misc_init_r
  omap730p2: Remove empty misc_init_r
  omap5912osk: Remove empty misc_init_r
  omap4+: Remove CONFIG_ARCH_CPU_INIT
  omap4: Remove CONFIG_SYS_MMC_SET_DEV
  OMAP3: pandora: drop console kernel argument
  OMAP3: pandora: revise GPIO configuration
  ...

8 files changed, 1075 insertions, 1 deletions

diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h
index ff0f6415d..637fb4bd1 100644
--- a/arch/arm/include/asm/arch-exynos/clk.h
+++ b/arch/arm/include/asm/arch-exynos/clk.h
@@ -33,5 +33,8 @@ unsigned long get_arm_clk(void);
 unsigned long get_pwm_clk(void);
 unsigned long get_uart_clk(int dev_index);
 void set_mmc_clk(int dev_index, unsigned int div);
+unsigned long get_lcd_clk(void);
+void set_lcd_clk(void);
+void set_mipi_clk(void);
 
 #endif
diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h
index 89f2c2e3e..ac4ddc735 100644
--- a/arch/arm/include/asm/arch-exynos/cpu.h
+++ b/arch/arm/include/asm/arch-exynos/cpu.h
@@ -29,6 +29,7 @@
 /* EXYNOS4 */
 #define EXYNOS4_GPIO_PART3_BASE		0x03860000
 #define EXYNOS4_PRO_ID			0x10000000
+#define EXYNOS4_SYSREG_BASE		0x10010000
 #define EXYNOS4_POWER_BASE		0x10020000
 #define EXYNOS4_SWRESET			0x10020400
 #define EXYNOS4_CLOCK_BASE		0x10030000
@@ -40,6 +41,7 @@
 #define EXYNOS4_GPIO_PART2_BASE		0x11000000
 #define EXYNOS4_GPIO_PART1_BASE		0x11400000
 #define EXYNOS4_FIMD_BASE		0x11C00000
+#define EXYNOS4_MIPI_DSIM_BASE		0x11C80000
 #define EXYNOS4_USBOTG_BASE		0x12480000
 #define EXYNOS4_MMC_BASE		0x12510000
 #define EXYNOS4_SROMC_BASE		0x12570000
@@ -65,6 +67,7 @@
 #define EXYNOS5_GPIO_PART3_BASE		0x10D10000
 #define EXYNOS5_DMC_CTRL_BASE		0x10DD0000
 #define EXYNOS5_GPIO_PART1_BASE		0x11400000
+#define EXYNOS5_MIPI_DSIM_BASE		0x11D00000
 #define EXYNOS5_MMC_BASE		0x12200000
 #define EXYNOS5_SROMC_BASE		0x12250000
 #define EXYNOS5_USBOTG_BASE		0x12480000
@@ -127,7 +130,9 @@ static inline unsigned int samsung_get_base_##device(void)	\
 
 SAMSUNG_BASE(adc, ADC_BASE)
 SAMSUNG_BASE(clock, CLOCK_BASE)
+SAMSUNG_BASE(sysreg, SYSREG_BASE)
 SAMSUNG_BASE(fimd, FIMD_BASE)
+SAMSUNG_BASE(mipi_dsim, MIPI_DSIM_BASE)
 SAMSUNG_BASE(gpio_part1, GPIO_PART1_BASE)
 SAMSUNG_BASE(gpio_part2, GPIO_PART2_BASE)
 SAMSUNG_BASE(gpio_part3, GPIO_PART3_BASE)
diff --git a/arch/arm/include/asm/arch-exynos/dsim.h b/arch/arm/include/asm/arch-exynos/dsim.h
new file mode 100644
index 000000000..e148aca2e
--- /dev/null
+++ b/arch/arm/include/asm/arch-exynos/dsim.h
@@ -0,0 +1,181 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * Author: InKi Dae <inki.dae@samsung.com>
+ * Author: Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_DSIM_H_
+#define __ASM_ARM_ARCH_DSIM_H_
+
+#ifndef __ASSEMBLY__
+
+struct exynos_mipi_dsim {
+	unsigned int	status;
+	unsigned int	swrst;
+	unsigned int	clkctrl;
+	unsigned int	timeout;
+	unsigned int	config;
+	unsigned int	escmode;
+	unsigned int	mdresol;
+	unsigned int	mvporch;
+	unsigned int	mhporch;
+	unsigned int	msync;
+	unsigned int	sdresol;
+	unsigned int	intsrc;
+	unsigned int	intmsk;
+	unsigned int	pkthdr;
+	unsigned int	payload;
+	unsigned int	rxfifo;
+	unsigned int	fifothld;
+	unsigned int	fifoctrl;
+	unsigned int	memacchr;
+	unsigned int	pllctrl;
+	unsigned int	plltmr;
+	unsigned int	phyacchr;
+	unsigned int	phyacchr1;
+};
+
+#endif	/* __ASSEMBLY__ */
+
+/*
+ * Bit Definitions
+ */
+/* DSIM_STATUS */
+#define DSIM_STOP_STATE_DAT(x)	(((x) & 0xf) << 0)
+#define DSIM_STOP_STATE_CLK	(1 << 8)
+#define DSIM_TX_READY_HS_CLK	(1 << 10)
+#define DSIM_PLL_STABLE		(1 << 31)
+
+/* DSIM_SWRST */
+#define DSIM_FUNCRST		(1 << 16)
+#define DSIM_SWRST		(1 << 0)
+
+/* EXYNOS_DSIM_TIMEOUT */
+#define DSIM_LPDR_TOUT_SHIFT	(0)
+#define DSIM_BTA_TOUT_SHIFT	(16)
+
+/* EXYNOS_DSIM_CLKCTRL */
+#define DSIM_LANE_ESC_CLKEN_SHIFT	(19)
+#define DSIM_BYTE_CLKEN_SHIFT		(24)
+#define DSIM_BYTE_CLK_SRC_SHIFT		(25)
+#define DSIM_PLL_BYPASS_SHIFT		(27)
+#define DSIM_ESC_CLKEN_SHIFT		(28)
+#define DSIM_TX_REQUEST_HSCLK_SHIFT	(31)
+#define DSIM_LANE_ESC_CLKEN(x)		(((x) & 0x1f) << \
+						DSIM_LANE_ESC_CLKEN_SHIFT)
+#define DSIM_BYTE_CLK_ENABLE		(1 << DSIM_BYTE_CLKEN_SHIFT)
+#define DSIM_BYTE_CLK_DISABLE		(0 << DSIM_BYTE_CLKEN_SHIFT)
+#define DSIM_PLL_BYPASS_EXTERNAL	(1 << DSIM_PLL_BYPASS_SHIFT)
+#define DSIM_ESC_CLKEN_ENABLE		(1 << DSIM_ESC_CLKEN_SHIFT)
+#define DSIM_ESC_CLKEN_DISABLE		(0 << DSIM_ESC_CLKEN_SHIFT)
+
+/* EXYNOS_DSIM_CONFIG */
+#define DSIM_NUM_OF_DATALANE_SHIFT	(5)
+#define DSIM_SUBPIX_SHIFT		(8)
+#define DSIM_MAINPIX_SHIFT		(12)
+#define DSIM_SUBVC_SHIFT		(16)
+#define DSIM_MAINVC_SHIFT		(18)
+#define DSIM_HSA_MODE_SHIFT		(20)
+#define DSIM_HBP_MODE_SHIFT		(21)
+#define DSIM_HFP_MODE_SHIFT		(22)
+#define DSIM_HSE_MODE_SHIFT		(23)
+#define DSIM_AUTO_MODE_SHIFT		(24)
+#define DSIM_VIDEO_MODE_SHIFT		(25)
+#define DSIM_BURST_MODE_SHIFT		(26)
+#define DSIM_EOT_PACKET_SHIFT		(28)
+#define DSIM_AUTO_FLUSH_SHIFT		(29)
+#define DSIM_LANE_ENx(x)		(((x) & 0x1f) << 0)
+
+#define DSIM_NUM_OF_DATA_LANE(x)	((x) << DSIM_NUM_OF_DATALANE_SHIFT)
+
+/* EXYNOS_DSIM_ESCMODE */
+#define DSIM_TX_LPDT_SHIFT		(6)
+#define DSIM_CMD_LPDT_SHIFT		(7)
+#define DSIM_TX_LPDT_LP			(1 << DSIM_TX_LPDT_SHIFT)
+#define DSIM_CMD_LPDT_LP		(1 << DSIM_CMD_LPDT_SHIFT)
+#define DSIM_STOP_STATE_CNT_SHIFT	(21)
+#define DSIM_FORCE_STOP_STATE_SHIFT	(20)
+
+/* EXYNOS_DSIM_MDRESOL */
+#define DSIM_MAIN_STAND_BY		(1 << 31)
+#define DSIM_MAIN_VRESOL(x)		(((x) & 0x7ff) << 16)
+#define DSIM_MAIN_HRESOL(x)		(((x) & 0X7ff) << 0)
+
+/* EXYNOS_DSIM_MVPORCH */
+#define DSIM_CMD_ALLOW_SHIFT		(28)
+#define DSIM_STABLE_VFP_SHIFT		(16)
+#define DSIM_MAIN_VBP_SHIFT		(0)
+#define DSIM_CMD_ALLOW_MASK		(0xf << DSIM_CMD_ALLOW_SHIFT)
+#define DSIM_STABLE_VFP_MASK		(0x7ff << DSIM_STABLE_VFP_SHIFT)
+#define DSIM_MAIN_VBP_MASK		(0x7ff << DSIM_MAIN_VBP_SHIFT)
+
+/* EXYNOS_DSIM_MHPORCH */
+#define DSIM_MAIN_HFP_SHIFT		(16)
+#define DSIM_MAIN_HBP_SHIFT		(0)
+#define DSIM_MAIN_HFP_MASK		((0xffff) << DSIM_MAIN_HFP_SHIFT)
+#define DSIM_MAIN_HBP_MASK		((0xffff) << DSIM_MAIN_HBP_SHIFT)
+
+/* EXYNOS_DSIM_MSYNC */
+#define DSIM_MAIN_VSA_SHIFT		(22)
+#define DSIM_MAIN_HSA_SHIFT		(0)
+#define DSIM_MAIN_VSA_MASK		((0x3ff) << DSIM_MAIN_VSA_SHIFT)
+#define DSIM_MAIN_HSA_MASK		((0xffff) << DSIM_MAIN_HSA_SHIFT)
+
+/* EXYNOS_DSIM_SDRESOL */
+#define DSIM_SUB_STANDY_SHIFT		(31)
+#define DSIM_SUB_VRESOL_SHIFT		(16)
+#define DSIM_SUB_HRESOL_SHIFT		(0)
+#define DSIM_SUB_STANDY_MASK		((0x1) << DSIM_SUB_STANDY_SHIFT)
+#define DSIM_SUB_VRESOL_MASK		((0x7ff) << DSIM_SUB_VRESOL_SHIFT)
+#define DSIM_SUB_HRESOL_MASK		((0x7ff) << DSIM_SUB_HRESOL_SHIFT)
+
+/* EXYNOS_DSIM_INTSRC */
+#define INTSRC_FRAME_DONE		(1 << 24)
+#define INTSRC_PLL_STABLE		(1 << 31)
+#define INTSRC_SWRST_RELEASE		(1 << 30)
+
+/* EXYNOS_DSIM_INTMSK */
+#define INTMSK_FRAME_DONE		(1 << 24)
+
+/* EXYNOS_DSIM_FIFOCTRL */
+#define SFR_HEADER_EMPTY		(1 << 22)
+
+/* EXYNOS_DSIM_PKTHDR */
+#define DSIM_PKTHDR_DI(x)		(((x) & 0x3f) << 0)
+#define DSIM_PKTHDR_DAT0(x)		((x) << 8)
+#define DSIM_PKTHDR_DAT1(x)		((x) << 16)
+
+/* EXYNOS_DSIM_PHYACCHR */
+#define DSIM_AFC_CTL(x)			(((x) & 0x7) << 5)
+#define DSIM_AFC_CTL_SHIFT		(5)
+#define DSIM_AFC_EN			(1 << 14)
+
+/* EXYNOS_DSIM_PHYACCHR1 */
+#define DSIM_DPDN_SWAP_DATA_SHIFT	(0)
+
+/* EXYNOS_DSIM_PLLCTRL */
+#define DSIM_SCALER_SHIFT		(1)
+#define DSIM_MAIN_SHIFT			(4)
+#define DSIM_PREDIV_SHIFT		(13)
+#define DSIM_PRECTRL_SHIFT		(20)
+#define DSIM_PLL_EN_SHIFT		(23)
+#define DSIM_FREQ_BAND_SHIFT		(24)
+#define DSIM_ZEROCTRL_SHIFT		(28)
+
+#endif
diff --git a/arch/arm/include/asm/arch-exynos/fb.h b/arch/arm/include/asm/arch-exynos/fb.h
new file mode 100644
index 000000000..b10b0da07
--- /dev/null
+++ b/arch/arm/include/asm/arch-exynos/fb.h
@@ -0,0 +1,446 @@
+/*
+ * (C) Copyright 2012 Samsung Electronics
+ * Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * aint with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARM_ARCH_FB_H_
+#define __ASM_ARM_ARCH_FB_H_
+
+#ifndef __ASSEMBLY__
+struct exynos4_fb {
+	unsigned int vidcon0;
+	unsigned int vidcon1;
+	unsigned int vidcon2;
+	unsigned int vidcon3;
+	unsigned int vidtcon0;
+	unsigned int vidtcon1;
+	unsigned int vidtcon2;
+	unsigned int vidtcon3;
+	unsigned int wincon0;
+	unsigned int wincon1;
+	unsigned int wincon2;
+	unsigned int wincon3;
+	unsigned int wincon4;
+
+	unsigned int winshmap;
+	unsigned int res1;
+
+	unsigned int winchmap2;
+	unsigned int vidosd0a;
+	unsigned int vidosd0b;
+	unsigned int vidosd0c;
+	unsigned int res2;
+
+	unsigned int vidosd1a;
+	unsigned int vidosd1b;
+	unsigned int vidosd1c;
+	unsigned int vidosd1d;
+
+	unsigned int vidosd2a;
+	unsigned int vidosd2b;
+	unsigned int vidosd2c;
+	unsigned int vidosd2d;
+
+	unsigned int vidosd3a;
+	unsigned int vidosd3b;
+	unsigned int vidosd3c;
+	unsigned int res3;
+
+	unsigned int vidosd4a;
+	unsigned int vidosd4b;
+	unsigned int vidosd4c;
+	unsigned int res4[5];
+
+	unsigned int vidw00add0b0;
+	unsigned int vidw00add0b1;
+	unsigned int vidw01add0b0;
+	unsigned int vidw01add0b1;
+
+	unsigned int vidw02add0b0;
+	unsigned int vidw02add0b1;
+	unsigned int vidw03add0b0;
+	unsigned int vidw03add0b1;
+	unsigned int vidw04add0b0;
+	unsigned int vidw04add0b1;
+	unsigned int res5[2];
+
+	unsigned int vidw00add1b0;
+	unsigned int vidw00add1b1;
+	unsigned int vidw01add1b0;
+	unsigned int vidw01add1b1;
+
+	unsigned int vidw02add1b0;
+	unsigned int vidw02add1b1;
+	unsigned int vidw03add1b0;
+	unsigned int vidw03add1b1;
+
+	unsigned int vidw04add1b0;
+	unsigned int vidw04add1b1;
+	unsigned int res7[2];
+
+	unsigned int vidw00add2;
+	unsigned int vidw01add2;
+	unsigned int vidw02add2;
+	unsigned int vidw03add2;
+	unsigned int vidw04add2;
+	unsigned int res8[7];
+
+	unsigned int vidintcon0;
+	unsigned int vidintcon1;
+	unsigned int res9[1];
+
+	unsigned int w1keycon0;
+	unsigned int w1keycon1;
+	unsigned int w2keycon0;
+	unsigned int w2keycon1;
+	unsigned int w3keycon0;
+	unsigned int w3keycon1;
+	unsigned int w4keycon0;
+	unsigned int w4keycon1;
+
+	unsigned int w1keyalpha;
+	unsigned int w2keyalpha;
+	unsigned int w3keyalpha;
+	unsigned int w4keyalpha;
+
+	unsigned int dithmode;
+	unsigned int res10[2];
+
+	unsigned int win0map;
+	unsigned int win1map;
+	unsigned int win2map;
+	unsigned int win3map;
+	unsigned int win4map;
+	unsigned int res11[1];
+
+	unsigned int wpalcon_h;
+	unsigned int wpalcon_l;
+
+	unsigned int trigcon;
+	unsigned int res12[2];
+
+	unsigned int i80ifcona0;
+	unsigned int i80ifcona1;
+	unsigned int i80ifconb0;
+	unsigned int i80ifconb1;
+
+	unsigned int colorgaincon;
+	unsigned int res13[2];
+
+	unsigned int ldi_cmdcon0;
+	unsigned int ldi_cmdcon1;
+	unsigned int res14[1];
+
+	/* To be updated */
+
+	unsigned char res15[156];
+	unsigned int dualrgb;
+};
+#endif
+
+/*
+ *  Register offsets
+*/
+#define EXYNOS_WINCON(x)				(x * 0x04)
+#define EXYNOS_VIDOSD(x)				(x * 0x10)
+#define EXYNOS_BUFFER_OFFSET(x)				(x * 0x08)
+#define EXYNOS_BUFFER_SIZE(x)				(x * 0x04)
+
+/*
+ * Bit Definitions
+*/
+
+/* VIDCON0 */
+#define EXYNOS_VIDCON0_DSI_DISABLE			(0 << 30)
+#define EXYNOS_VIDCON0_DSI_ENABLE			(1 << 30)
+#define EXYNOS_VIDCON0_SCAN_PROGRESSIVE			(0 << 29)
+#define EXYNOS_VIDCON0_SCAN_INTERLACE			(1 << 29)
+#define EXYNOS_VIDCON0_SCAN_MASK			(1 << 29)
+#define EXYNOS_VIDCON0_VIDOUT_RGB			(0 << 26)
+#define EXYNOS_VIDCON0_VIDOUT_ITU			(1 << 26)
+#define EXYNOS_VIDCON0_VIDOUT_I80LDI0			(2 << 26)
+#define EXYNOS_VIDCON0_VIDOUT_I80LDI1			(3 << 26)
+#define EXYNOS_VIDCON0_VIDOUT_WB_RGB			(4 << 26)
+#define EXYNOS_VIDCON0_VIDOUT_WB_I80LDI0		(6 << 26)
+#define EXYNOS_VIDCON0_VIDOUT_WB_I80LDI1		(7 << 26)
+#define EXYNOS_VIDCON0_VIDOUT_MASK			(7 << 26)
+#define EXYNOS_VIDCON0_PNRMODE_RGB_P			(0 << 17)
+#define EXYNOS_VIDCON0_PNRMODE_BGR_P			(1 << 17)
+#define EXYNOS_VIDCON0_PNRMODE_RGB_S			(2 << 17)
+#define EXYNOS_VIDCON0_PNRMODE_BGR_S			(3 << 17)
+#define EXYNOS_VIDCON0_PNRMODE_MASK			(3 << 17)
+#define EXYNOS_VIDCON0_PNRMODE_SHIFT			(17)
+#define EXYNOS_VIDCON0_CLKVALUP_ALWAYS			(0 << 16)
+#define EXYNOS_VIDCON0_CLKVALUP_START_FRAME		(1 << 16)
+#define EXYNOS_VIDCON0_CLKVALUP_MASK			(1 << 16)
+#define EXYNOS_VIDCON0_CLKVAL_F(x)			(((x) & 0xff) << 6)
+#define EXYNOS_VIDCON0_VCLKEN_NORMAL			(0 << 5)
+#define EXYNOS_VIDCON0_VCLKEN_FREERUN			(1 << 5)
+#define EXYNOS_VIDCON0_VCLKEN_MASK			(1 << 5)
+#define EXYNOS_VIDCON0_CLKDIR_DIRECTED			(0 << 4)
+#define EXYNOS_VIDCON0_CLKDIR_DIVIDED			(1 << 4)
+#define EXYNOS_VIDCON0_CLKDIR_MASK			(1 << 4)
+#define EXYNOS_VIDCON0_CLKSEL_HCLK			(0 << 2)
+#define EXYNOS_VIDCON0_CLKSEL_SCLK			(1 << 2)
+#define EXYNOS_VIDCON0_CLKSEL_MASK			(1 << 2)
+#define EXYNOS_VIDCON0_ENVID_ENABLE			(1 << 1)
+#define EXYNOS_VIDCON0_ENVID_DISABLE			(0 << 1)
+#define EXYNOS_VIDCON0_ENVID_F_ENABLE			(1 << 0)
+#define EXYNOS_VIDCON0_ENVID_F_DISABLE			(0 << 0)
+
+/* VIDCON1 */
+#define EXYNOS_VIDCON1_IVCLK_FALLING_EDGE		(0 << 7)
+#define EXYNOS_VIDCON1_IVCLK_RISING_EDGE		(1 << 7)
+#define EXYNOS_VIDCON1_IHSYNC_NORMAL			(0 << 6)
+#define EXYNOS_VIDCON1_IHSYNC_INVERT			(1 << 6)
+#define EXYNOS_VIDCON1_IVSYNC_NORMAL			(0 << 5)
+#define EXYNOS_VIDCON1_IVSYNC_INVERT			(1 << 5)
+#define EXYNOS_VIDCON1_IVDEN_NORMAL			(0 << 4)
+#define EXYNOS_VIDCON1_IVDEN_INVERT			(1 << 4)
+
+/* VIDCON2 */
+#define EXYNOS_VIDCON2_EN601_DISABLE			(0 << 23)
+#define EXYNOS_VIDCON2_EN601_ENABLE			(1 << 23)
+#define EXYNOS_VIDCON2_EN601_MASK			(1 << 23)
+#define EXYNOS_VIDCON2_WB_DISABLE			(0 << 15)
+#define EXYNOS_VIDCON2_WB_ENABLE			(1 << 15)
+#define EXYNOS_VIDCON2_WB_MASK				(1 << 15)
+#define EXYNOS_VIDCON2_TVFORMATSEL_HW			(0 << 14)
+#define EXYNOS_VIDCON2_TVFORMATSEL_SW			(1 << 14)
+#define EXYNOS_VIDCON2_TVFORMATSEL_MASK			(1 << 14)
+#define EXYNOS_VIDCON2_TVFORMATSEL_YUV422		(1 << 12)
+#define EXYNOS_VIDCON2_TVFORMATSEL_YUV444		(2 << 12)
+#define EXYNOS_VIDCON2_TVFORMATSEL_YUV_MASK		(3 << 12)
+#define EXYNOS_VIDCON2_ORGYUV_YCBCR			(0 << 8)
+#define EXYNOS_VIDCON2_ORGYUV_CBCRY			(1 << 8)
+#define EXYNOS_VIDCON2_ORGYUV_MASK			(1 << 8)
+#define EXYNOS_VIDCON2_YUVORD_CBCR			(0 << 7)
+#define EXYNOS_VIDCON2_YUVORD_CRCB			(1 << 7)
+#define EXYNOS_VIDCON2_YUVORD_MASK			(1 << 7)
+
+/* PRTCON */
+#define EXYNOS_PRTCON_UPDATABLE				(0 << 11)
+#define EXYNOS_PRTCON_PROTECT				(1 << 11)
+
+/* VIDTCON0 */
+#define EXYNOS_VIDTCON0_VBPDE(x)			(((x) & 0xff) << 24)
+#define EXYNOS_VIDTCON0_VBPD(x)				(((x) & 0xff) << 16)
+#define EXYNOS_VIDTCON0_VFPD(x)				(((x) & 0xff) << 8)
+#define EXYNOS_VIDTCON0_VSPW(x)				(((x) & 0xff) << 0)
+
+/* VIDTCON1 */
+#define EXYNOS_VIDTCON1_VFPDE(x)			(((x) & 0xff) << 24)
+#define EXYNOS_VIDTCON1_HBPD(x)				(((x) & 0xff) << 16)
+#define EXYNOS_VIDTCON1_HFPD(x)				(((x) & 0xff) << 8)
+#define EXYNOS_VIDTCON1_HSPW(x)				(((x) & 0xff) << 0)
+
+/* VIDTCON2 */
+#define EXYNOS_VIDTCON2_LINEVAL(x)			(((x) & 0x7ff) << 11)
+#define EXYNOS_VIDTCON2_HOZVAL(x)			(((x) & 0x7ff) << 0)
+
+/* Window 0~4 Control - WINCONx */
+#define EXYNOS_WINCON_DATAPATH_DMA			(0 << 22)
+#define EXYNOS_WINCON_DATAPATH_LOCAL			(1 << 22)
+#define EXYNOS_WINCON_DATAPATH_MASK			(1 << 22)
+#define EXYNOS_WINCON_BUFSEL_0				(0 << 20)
+#define EXYNOS_WINCON_BUFSEL_1				(1 << 20)
+#define EXYNOS_WINCON_BUFSEL_MASK			(1 << 20)
+#define EXYNOS_WINCON_BUFSEL_SHIFT			(20)
+#define EXYNOS_WINCON_BUFAUTO_DISABLE			(0 << 19)
+#define EXYNOS_WINCON_BUFAUTO_ENABLE			(1 << 19)
+#define EXYNOS_WINCON_BUFAUTO_MASK			(1 << 19)
+#define EXYNOS_WINCON_BITSWP_DISABLE			(0 << 18)
+#define EXYNOS_WINCON_BITSWP_ENABLE			(1 << 18)
+#define EXYNOS_WINCON_BITSWP_SHIFT			(18)
+#define EXYNOS_WINCON_BYTESWP_DISABLE			(0 << 17)
+#define EXYNOS_WINCON_BYTESWP_ENABLE			(1 << 17)
+#define EXYNOS_WINCON_BYTESWP_SHIFT			(17)
+#define EXYNOS_WINCON_HAWSWP_DISABLE			(0 << 16)
+#define EXYNOS_WINCON_HAWSWP_ENABLE			(1 << 16)
+#define EXYNOS_WINCON_HAWSWP_SHIFT			(16)
+#define EXYNOS_WINCON_WSWP_DISABLE			(0 << 15)
+#define EXYNOS_WINCON_WSWP_ENABLE			(1 << 15)
+#define EXYNOS_WINCON_WSWP_SHIFT			(15)
+#define EXYNOS_WINCON_INRGB_RGB				(0 << 13)
+#define EXYNOS_WINCON_INRGB_YUV				(1 << 13)
+#define EXYNOS_WINCON_INRGB_MASK			(1 << 13)
+#define EXYNOS_WINCON_BURSTLEN_16WORD			(0 << 9)
+#define EXYNOS_WINCON_BURSTLEN_8WORD			(1 << 9)
+#define EXYNOS_WINCON_BURSTLEN_4WORD			(2 << 9)
+#define EXYNOS_WINCON_BURSTLEN_MASK			(3 << 9)
+#define EXYNOS_WINCON_ALPHA_MULTI_DISABLE		(0 << 7)
+#define EXYNOS_WINCON_ALPHA_MULTI_ENABLE		(1 << 7)
+#define EXYNOS_WINCON_BLD_PLANE				(0 << 6)
+#define EXYNOS_WINCON_BLD_PIXEL				(1 << 6)
+#define EXYNOS_WINCON_BLD_MASK				(1 << 6)
+#define EXYNOS_WINCON_BPPMODE_1BPP			(0 << 2)
+#define EXYNOS_WINCON_BPPMODE_2BPP			(1 << 2)
+#define EXYNOS_WINCON_BPPMODE_4BPP			(2 << 2)
+#define EXYNOS_WINCON_BPPMODE_8BPP_PAL			(3 << 2)
+#define EXYNOS_WINCON_BPPMODE_8BPP			(4 << 2)
+#define EXYNOS_WINCON_BPPMODE_16BPP_565			(5 << 2)
+#define EXYNOS_WINCON_BPPMODE_16BPP_A555		(6 << 2)
+#define EXYNOS_WINCON_BPPMODE_18BPP_666			(8 << 2)
+#define EXYNOS_WINCON_BPPMODE_18BPP_A665		(9 << 2)
+#define EXYNOS_WINCON_BPPMODE_24BPP_888			(0xb << 2)
+#define EXYNOS_WINCON_BPPMODE_24BPP_A887		(0xc << 2)
+#define EXYNOS_WINCON_BPPMODE_32BPP			(0xd << 2)
+#define EXYNOS_WINCON_BPPMODE_16BPP_A444		(0xe << 2)
+#define EXYNOS_WINCON_BPPMODE_15BPP_555			(0xf << 2)
+#define EXYNOS_WINCON_BPPMODE_MASK			(0xf << 2)
+#define EXYNOS_WINCON_BPPMODE_SHIFT			(2)
+#define EXYNOS_WINCON_ALPHA0_SEL			(0 << 1)
+#define EXYNOS_WINCON_ALPHA1_SEL			(1 << 1)
+#define EXYNOS_WINCON_ALPHA_SEL_MASK			(1 << 1)
+#define EXYNOS_WINCON_ENWIN_DISABLE			(0 << 0)
+#define EXYNOS_WINCON_ENWIN_ENABLE			(1 << 0)
+
+/* WINCON1 special */
+#define EXYNOS_WINCON1_VP_DISABLE			(0 << 24)
+#define EXYNOS_WINCON1_VP_ENABLE			(1 << 24)
+#define EXYNOS_WINCON1_LOCALSEL_FIMC1			(0 << 23)
+#define EXYNOS_WINCON1_LOCALSEL_VP			(1 << 23)
+#define EXYNOS_WINCON1_LOCALSEL_MASK			(1 << 23)
+
+/* WINSHMAP */
+#define EXYNOS_WINSHMAP_PROTECT(x)			(((x) & 0x1f) << 10)
+#define EXYNOS_WINSHMAP_CH_ENABLE(x)			(1 << (x))
+#define EXYNOS_WINSHMAP_CH_DISABLE(x)			(1 << (x))
+#define EXYNOS_WINSHMAP_LOCAL_ENABLE(x)			(0x20 << (x))
+#define EXYNOS_WINSHMAP_LOCAL_DISABLE(x)		(0x20 << (x))
+
+/* VIDOSDxA, VIDOSDxB */
+#define EXYNOS_VIDOSD_LEFT_X(x)				(((x) & 0x7ff) << 11)
+#define EXYNOS_VIDOSD_TOP_Y(x)				(((x) & 0x7ff) << 0)
+#define EXYNOS_VIDOSD_RIGHT_X(x)			(((x) & 0x7ff) << 11)
+#define EXYNOS_VIDOSD_BOTTOM_Y(x)			(((x) & 0x7ff) << 0)
+
+/* VIDOSD0C, VIDOSDxD */
+#define EXYNOS_VIDOSD_SIZE(x)				(((x) & 0xffffff) << 0)
+
+/* VIDOSDxC (1~4) */
+#define EXYNOS_VIDOSD_ALPHA0_R(x)			(((x) & 0xf) << 20)
+#define EXYNOS_VIDOSD_ALPHA0_G(x)			(((x) & 0xf) << 16)
+#define EXYNOS_VIDOSD_ALPHA0_B(x)			(((x) & 0xf) << 12)
+#define EXYNOS_VIDOSD_ALPHA1_R(x)			(((x) & 0xf) << 8)
+#define EXYNOS_VIDOSD_ALPHA1_G(x)			(((x) & 0xf) << 4)
+#define EXYNOS_VIDOSD_ALPHA1_B(x)			(((x) & 0xf) << 0)
+#define EXYNOS_VIDOSD_ALPHA0_SHIFT			(12)
+#define EXYNOS_VIDOSD_ALPHA1_SHIFT			(0)
+
+/* Start Address */
+#define EXYNOS_VIDADDR_START_VBANK(x)			(((x) & 0xff) << 24)
+#define EXYNOS_VIDADDR_START_VBASEU(x)			(((x) & 0xffffff) << 0)
+
+/* End Address */
+#define EXYNOS_VIDADDR_END_VBASEL(x)			(((x) & 0xffffff) << 0)
+
+/* Buffer Size */
+#define EXYNOS_VIDADDR_OFFSIZE(x)			(((x) & 0x1fff) << 13)
+#define EXYNOS_VIDADDR_PAGEWIDTH(x)			(((x) & 0x1fff) << 0)
+
+/* WIN Color Map */
+#define EXYNOS_WINMAP_COLOR(x)				((x) & 0xffffff)
+
+/* VIDINTCON0 */
+#define EXYNOS_VIDINTCON0_SYSMAINCON_DISABLE		(0 << 19)
+#define EXYNOS_VIDINTCON0_SYSMAINCON_ENABLE		(1 << 19)
+#define EXYNOS_VIDINTCON0_SYSSUBCON_DISABLE		(0 << 18)
+#define EXYNOS_VIDINTCON0_SYSSUBCON_ENABLE		(1 << 18)
+#define EXYNOS_VIDINTCON0_SYSIFDONE_DISABLE		(0 << 17)
+#define EXYNOS_VIDINTCON0_SYSIFDONE_ENABLE		(1 << 17)
+#define EXYNOS_VIDINTCON0_FRAMESEL0_BACK		(0 << 15)
+#define EXYNOS_VIDINTCON0_FRAMESEL0_VSYNC		(1 << 15)
+#define EXYNOS_VIDINTCON0_FRAMESEL0_ACTIVE		(2 << 15)
+#define EXYNOS_VIDINTCON0_FRAMESEL0_FRONT		(3 << 15)
+#define EXYNOS_VIDINTCON0_FRAMESEL0_MASK		(3 << 15)
+#define EXYNOS_VIDINTCON0_FRAMESEL1_NONE		(0 << 13)
+#define EXYNOS_VIDINTCON0_FRAMESEL1_BACK		(1 << 13)
+#define EXYNOS_VIDINTCON0_FRAMESEL1_VSYNC		(2 << 13)
+#define EXYNOS_VIDINTCON0_FRAMESEL1_FRONT		(3 << 13)
+#define EXYNOS_VIDINTCON0_INTFRMEN_DISABLE		(0 << 12)
+#define EXYNOS_VIDINTCON0_INTFRMEN_ENABLE		(1 << 12)
+#define EXYNOS_VIDINTCON0_FIFOSEL_WIN4			(1 << 11)
+#define EXYNOS_VIDINTCON0_FIFOSEL_WIN3			(1 << 10)
+#define EXYNOS_VIDINTCON0_FIFOSEL_WIN2			(1 << 9)
+#define EXYNOS_VIDINTCON0_FIFOSEL_WIN1			(1 << 6)
+#define EXYNOS_VIDINTCON0_FIFOSEL_WIN0			(1 << 5)
+#define EXYNOS_VIDINTCON0_FIFOSEL_ALL			(0x73 << 5)
+#define EXYNOS_VIDINTCON0_FIFOSEL_MASK			(0x73 << 5)
+#define EXYNOS_VIDINTCON0_FIFOLEVEL_25			(0 << 2)
+#define EXYNOS_VIDINTCON0_FIFOLEVEL_50			(1 << 2)
+#define EXYNOS_VIDINTCON0_FIFOLEVEL_75			(2 << 2)
+#define EXYNOS_VIDINTCON0_FIFOLEVEL_EMPTY		(3 << 2)
+#define EXYNOS_VIDINTCON0_FIFOLEVEL_FULL		(4 << 2)
+#define EXYNOS_VIDINTCON0_FIFOLEVEL_MASK		(7 << 2)
+#define EXYNOS_VIDINTCON0_INTFIFO_DISABLE		(0 << 1)
+#define EXYNOS_VIDINTCON0_INTFIFO_ENABLE		(1 << 1)
+#define EXYNOS_VIDINTCON0_INT_DISABLE			(0 << 0)
+#define EXYNOS_VIDINTCON0_INT_ENABLE			(1 << 0)
+#define EXYNOS_VIDINTCON0_INT_MASK			(1 << 0)
+
+/* VIDINTCON1 */
+#define EXYNOS_VIDINTCON1_INTVPPEND			(1 << 5)
+#define EXYNOS_VIDINTCON1_INTI80PEND			(1 << 2)
+#define EXYNOS_VIDINTCON1_INTFRMPEND			(1 << 1)
+#define EXYNOS_VIDINTCON1_INTFIFOPEND			(1 << 0)
+
+/* WINMAP */
+#define EXYNOS_WINMAP_ENABLE				(1 << 24)
+
+/* WxKEYCON0 (1~4) */
+#define EXYNOS_KEYCON0_KEYBLEN_DISABLE			(0 << 26)
+#define EXYNOS_KEYCON0_KEYBLEN_ENABLE			(1 << 26)
+#define EXYNOS_KEYCON0_KEY_DISABLE			(0 << 25)
+#define EXYNOS_KEYCON0_KEY_ENABLE			(1 << 25)
+#define EXYNOS_KEYCON0_DIRCON_MATCH_FG			(0 << 24)
+#define EXYNOS_KEYCON0_DIRCON_MATCH_BG			(1 << 24)
+#define EXYNOS_KEYCON0_COMPKEY(x)			(((x) & 0xffffff) << 0)
+
+/* WxKEYCON1 (1~4) */
+#define EXYNOS_KEYCON1_COLVAL(x)			(((x) & 0xffffff) << 0)
+
+/* DUALRGB */
+#define EXYNOS_DUALRGB_BYPASS_SINGLE			(0x00 << 0)
+#define EXYNOS_DUALRGB_BYPASS_DUAL			(0x01 << 0)
+#define EXYNOS_DUALRGB_MIE_DUAL				(0x10 << 0)
+#define EXYNOS_DUALRGB_MIE_SINGLE			(0x11 << 0)
+#define EXYNOS_DUALRGB_LINESPLIT			(0x0 << 2)
+#define EXYNOS_DUALRGB_FRAMESPLIT			(0x1 << 2)
+#define EXYNOS_DUALRGB_SUB_CNT(x)			((x & 0xfff) << 4)
+#define EXYNOS_DUALRGB_VDEN_EN_DISABLE			(0x0 << 16)
+#define EXYNOS_DUALRGB_VDEN_EN_ENABLE			(0x1 << 16)
+#define EXYNOS_DUALRGB_MAIN_CNT(x)			((x & 0xfff) << 18)
+
+/* I80IFCONA0 and I80IFCONA1 */
+#define EXYNOS_LCD_CS_SETUP(x)				(((x) & 0xf) << 16)
+#define EXYNOS_LCD_WR_SETUP(x)				(((x) & 0xf) << 12)
+#define EXYNOS_LCD_WR_ACT(x)				(((x) & 0xf) << 8)
+#define EXYNOS_LCD_WR_HOLD(x)				(((x) & 0xf) << 4)
+#define EXYNOS_RSPOL_LOW				(0 << 2)
+#define EXYNOS_RSPOL_HIGH				(1 << 2)
+#define EXYNOS_I80IFEN_DISABLE				(0 << 0)
+#define EXYNOS_I80IFEN_ENABLE				(1 << 0)
+
+/* TRIGCON */
+#define EXYNOS_I80SOFT_TRIG_EN				(1 << 0)
+#define EXYNOS_I80START_TRIG				(1 << 1)
+#define EXYNOS_I80STATUS_TRIG_DONE			(1 << 2)
+
+#endif /* _REGS_FB_H */
diff --git a/arch/arm/include/asm/arch-exynos/mipi_dsim.h b/arch/arm/include/asm/arch-exynos/mipi_dsim.h
new file mode 100644
index 000000000..ef6a3d112
--- /dev/null
+++ b/arch/arm/include/asm/arch-exynos/mipi_dsim.h
@@ -0,0 +1,380 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * Author: InKi Dae <inki.dae@samsung.com>
+ * Author: Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _DSIM_H
+#define _DSIM_H
+
+#include <linux/list.h>
+#include <linux/fb.h>
+
+#define PANEL_NAME_SIZE		(32)
+
+enum mipi_dsim_interface_type {
+	DSIM_COMMAND,
+	DSIM_VIDEO
+};
+
+enum mipi_dsim_virtual_ch_no {
+	DSIM_VIRTUAL_CH_0,
+	DSIM_VIRTUAL_CH_1,
+	DSIM_VIRTUAL_CH_2,
+	DSIM_VIRTUAL_CH_3
+};
+
+enum mipi_dsim_burst_mode_type {
+	DSIM_NON_BURST_SYNC_EVENT,
+	DSIM_BURST_SYNC_EVENT,
+	DSIM_NON_BURST_SYNC_PULSE,
+	DSIM_BURST,
+	DSIM_NON_VIDEO_MODE
+};
+
+enum mipi_dsim_no_of_data_lane {
+	DSIM_DATA_LANE_1,
+	DSIM_DATA_LANE_2,
+	DSIM_DATA_LANE_3,
+	DSIM_DATA_LANE_4
+};
+
+enum mipi_dsim_byte_clk_src {
+	DSIM_PLL_OUT_DIV8,
+	DSIM_EXT_CLK_DIV8,
+	DSIM_EXT_CLK_BYPASS
+};
+
+enum mipi_dsim_pixel_format {
+	DSIM_CMD_3BPP,
+	DSIM_CMD_8BPP,
+	DSIM_CMD_12BPP,
+	DSIM_CMD_16BPP,
+	DSIM_VID_16BPP_565,
+	DSIM_VID_18BPP_666PACKED,
+	DSIM_18BPP_666LOOSELYPACKED,
+	DSIM_24BPP_888
+};
+
+/* MIPI DSI Processor-to-Peripheral transaction types */
+enum {
+	MIPI_DSI_V_SYNC_START				= 0x01,
+	MIPI_DSI_V_SYNC_END				= 0x11,
+	MIPI_DSI_H_SYNC_START				= 0x21,
+	MIPI_DSI_H_SYNC_END				= 0x31,
+
+	MIPI_DSI_COLOR_MODE_OFF				= 0x02,
+	MIPI_DSI_COLOR_MODE_ON				= 0x12,
+	MIPI_DSI_SHUTDOWN_PERIPHERAL			= 0x22,
+	MIPI_DSI_TURN_ON_PERIPHERAL			= 0x32,
+
+	MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM		= 0x03,
+	MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM		= 0x13,
+	MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM		= 0x23,
+
+	MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM		= 0x04,
+	MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM		= 0x14,
+	MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM		= 0x24,
+
+	MIPI_DSI_DCS_SHORT_WRITE			= 0x05,
+	MIPI_DSI_DCS_SHORT_WRITE_PARAM			= 0x15,
+
+	MIPI_DSI_DCS_READ				= 0x06,
+
+	MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE		= 0x37,
+
+	MIPI_DSI_END_OF_TRANSMISSION			= 0x08,
+
+	MIPI_DSI_NULL_PACKET				= 0x09,
+	MIPI_DSI_BLANKING_PACKET			= 0x19,
+	MIPI_DSI_GENERIC_LONG_WRITE			= 0x29,
+	MIPI_DSI_DCS_LONG_WRITE				= 0x39,
+
+	MIPI_DSI_LOOSELY_PACKED_PIXEL_STREAM_YCBCR20	= 0x0c,
+	MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR24		= 0x1c,
+	MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16		= 0x2c,
+
+	MIPI_DSI_PACKED_PIXEL_STREAM_30			= 0x0d,
+	MIPI_DSI_PACKED_PIXEL_STREAM_36			= 0x1d,
+	MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12		= 0x3d,
+
+	MIPI_DSI_PACKED_PIXEL_STREAM_16			= 0x0e,
+	MIPI_DSI_PACKED_PIXEL_STREAM_18			= 0x1e,
+	MIPI_DSI_PIXEL_STREAM_3BYTE_18			= 0x2e,
+	MIPI_DSI_PACKED_PIXEL_STREAM_24			= 0x3e,
+};
+
+/*
+ * struct mipi_dsim_config - interface for configuring mipi-dsi controller.
+ *
+ * @auto_flush: enable or disable Auto flush of MD FIFO using VSYNC pulse.
+ * @eot_disable: enable or disable EoT packet in HS mode.
+ * @auto_vertical_cnt: specifies auto vertical count mode.
+ *	in Video mode, the vertical line transition uses line counter
+ *	configured by VSA, VBP, and Vertical resolution.
+ *	If this bit is set to '1', the line counter does not use VSA and VBP
+ *	registers.(in command mode, this variable is ignored)
+ * @hse: set horizontal sync event mode.
+ *	In VSYNC pulse and Vporch area, MIPI DSI master transfers only HSYNC
+ *	start packet to MIPI DSI slave at MIPI DSI spec1.1r02.
+ *	this bit transfers HSYNC end packet in VSYNC pulse and Vporch area
+ *	(in mommand mode, this variable is ignored)
+ * @hfp: specifies HFP disable mode.
+ *	if this variable is set, DSI master ignores HFP area in VIDEO mode.
+ *	(in command mode, this variable is ignored)
+ * @hbp: specifies HBP disable mode.
+ *	if this variable is set, DSI master ignores HBP area in VIDEO mode.
+ *	(in command mode, this variable is ignored)
+ * @hsa: specifies HSA disable mode.
+ *	if this variable is set, DSI master ignores HSA area in VIDEO mode.
+ *	(in command mode, this variable is ignored)
+ * @e_interface: specifies interface to be used.(CPU or RGB interface)
+ * @e_virtual_ch: specifies virtual channel number that main or
+ *	sub diaplsy uses.
+ * @e_pixel_format: specifies pixel stream format for main or sub display.
+ * @e_burst_mode: selects Burst mode in Video mode.
+ *	in Non-burst mode, RGB data area is filled with RGB data and NULL
+ *	packets, according to input bandwidth of RGB interface.
+ *	In Burst mode, RGB data area is filled with RGB data only.
+ * @e_no_data_lane: specifies data lane count to be used by Master.
+ * @e_byte_clk: select byte clock source. (it must be DSIM_PLL_OUT_DIV8)
+ *	DSIM_EXT_CLK_DIV8 and DSIM_EXT_CLK_BYPASSS are not supported.
+ * @pll_stable_time: specifies the PLL Timer for stability of the ganerated
+ *	clock(System clock cycle base)
+ *	if the timer value goes to 0x00000000, the clock stable bit of status
+ *	and interrupt register is set.
+ * @esc_clk: specifies escape clock frequency for getting the escape clock
+ *	prescaler value.
+ * @stop_holding_cnt: specifies the interval value between transmitting
+ *	read packet(or write "set_tear_on" command) and BTA request.
+ *	after transmitting read packet or write "set_tear_on" command,
+ *	BTA requests to D-PHY automatically. this counter value specifies
+ *	the interval between them.
+ * @bta_timeout: specifies the timer for BTA.
+ *	this register specifies time out from BTA request to change
+ *	the direction with respect to Tx escape clock.
+ * @rx_timeout: specifies the timer for LP Rx mode timeout.
+ *	this register specifies time out on how long RxValid deasserts,
+ *	after RxLpdt asserts with respect to Tx escape clock.
+ *	- RxValid specifies Rx data valid indicator.
+ *	- RxLpdt specifies an indicator that D-PHY is under RxLpdt mode.
+ *	- RxValid and RxLpdt specifies signal from D-PHY.
+ */
+struct mipi_dsim_config {
+	unsigned char			auto_flush;
+	unsigned char			eot_disable;
+
+	unsigned char			auto_vertical_cnt;
+	unsigned char			hse;
+	unsigned char			hfp;
+	unsigned char			hbp;
+	unsigned char			hsa;
+
+	enum mipi_dsim_interface_type	e_interface;
+	enum mipi_dsim_virtual_ch_no	e_virtual_ch;
+	enum mipi_dsim_pixel_format	e_pixel_format;
+	enum mipi_dsim_burst_mode_type	e_burst_mode;
+	enum mipi_dsim_no_of_data_lane	e_no_data_lane;
+	enum mipi_dsim_byte_clk_src	e_byte_clk;
+
+	/*
+	 * ===========================================
+	 * |    P    |    M    |    S    |    MHz    |
+	 * -------------------------------------------
+	 * |    3    |   100   |    3    |    100    |
+	 * |    3    |   100   |    2    |    200    |
+	 * |    3    |    63   |    1    |    252    |
+	 * |    4    |   100   |    1    |    300    |
+	 * |    4    |   110   |    1    |    330    |
+	 * |   12    |   350   |    1    |    350    |
+	 * |    3    |   100   |    1    |    400    |
+	 * |    4    |   150   |    1    |    450    |
+	 * |    6    |   118   |    1    |    472    |
+	 * |	3    |   120   |    1    |    480    |
+	 * |   12    |   250   |    0    |    500    |
+	 * |    4    |   100   |    0    |    600    |
+	 * |    3    |    81   |    0    |    648    |
+	 * |    3    |    88   |    0    |    704    |
+	 * |    3    |    90   |    0    |    720    |
+	 * |    3    |   100   |    0    |    800    |
+	 * |   12    |   425   |    0    |    850    |
+	 * |    4    |   150   |    0    |    900    |
+	 * |   12    |   475   |    0    |    950    |
+	 * |    6    |   250   |    0    |   1000    |
+	 * -------------------------------------------
+	 */
+
+	/*
+	 * pms could be calculated as the following.
+	 * M * 24 / P * 2 ^ S = MHz
+	 */
+	unsigned char			p;
+	unsigned short			m;
+	unsigned char			s;
+
+	unsigned int			pll_stable_time;
+	unsigned long			esc_clk;
+
+	unsigned short			stop_holding_cnt;
+	unsigned char			bta_timeout;
+	unsigned short			rx_timeout;
+};
+
+/*
+ * struct mipi_dsim_device - global interface for mipi-dsi driver.
+ *
+ * @dsim_config: infomation for configuring mipi-dsi controller.
+ * @master_ops: callbacks to mipi-dsi operations.
+ * @dsim_lcd_dev: pointer to activated ddi device.
+ *	(it would be registered by mipi-dsi driver.)
+ * @dsim_lcd_drv: pointer to activated_ddi driver.
+ *	(it would be registered by mipi-dsi driver.)
+ * @state: specifies status of MIPI-DSI controller.
+ *	the status could be RESET, INIT, STOP, HSCLKEN and ULPS.
+ * @data_lane: specifiec enabled data lane number.
+ *	this variable would be set by driver according to e_no_data_lane
+ *	automatically.
+ * @e_clk_src: select byte clock source.
+ * @pd: pointer to MIPI-DSI driver platform data.
+ */
+struct mipi_dsim_device {
+	struct mipi_dsim_config		*dsim_config;
+	struct mipi_dsim_master_ops	*master_ops;
+	struct mipi_dsim_lcd_device	*dsim_lcd_dev;
+	struct mipi_dsim_lcd_driver	*dsim_lcd_drv;
+
+	unsigned int			state;
+	unsigned int			data_lane;
+	enum mipi_dsim_byte_clk_src	e_clk_src;
+
+	struct exynos_platform_mipi_dsim	*pd;
+};
+
+/*
+ * struct exynos_platform_mipi_dsim - interface to platform data
+ *	for mipi-dsi driver.
+ *
+ * @lcd_panel_name: specifies lcd panel name registered to mipi-dsi driver.
+ *	lcd panel driver searched would be actived.
+ * @dsim_config: pointer of structure for configuring mipi-dsi controller.
+ * @lcd_panel_info: pointer for lcd panel specific structure.
+ *	this structure specifies width, height, timing and polarity and so on.
+ * @lcd_power: callback pointer for enabling or disabling lcd power.
+ * @mipi_power: callback pointer for enabling or disabling mipi power.
+ * @phy_enable: pointer to a callback controlling D-PHY enable/reset
+ */
+struct exynos_platform_mipi_dsim {
+	char				lcd_panel_name[PANEL_NAME_SIZE];
+
+	struct mipi_dsim_config		*dsim_config;
+	void				*lcd_panel_info;
+
+	int (*lcd_power)(void);
+	int (*mipi_power)(void);
+	void (*phy_enable)(unsigned int dev_index, unsigned int enable);
+};
+
+/*
+ * struct mipi_dsim_master_ops - callbacks to mipi-dsi operations.
+ *
+ * @cmd_write: transfer command to lcd panel at LP mode.
+ * @cmd_read: read command from rx register.
+ * @get_dsim_frame_done: get the status that all screen data have been
+ *	transferred to mipi-dsi.
+ * @clear_dsim_frame_done: clear frame done status.
+ * @get_fb_frame_done: get frame done status of display controller.
+ * @trigger: trigger display controller.
+ *	- this one would be used only in case of CPU mode.
+ */
+struct mipi_dsim_master_ops {
+	int (*cmd_write)(struct mipi_dsim_device *dsim, unsigned int data_id,
+		unsigned int data0, unsigned int data1);
+	int (*cmd_read)(struct mipi_dsim_device *dsim, unsigned int data_id,
+		unsigned int data0, unsigned int data1);
+	int (*get_dsim_frame_done)(struct mipi_dsim_device *dsim);
+	int (*clear_dsim_frame_done)(struct mipi_dsim_device *dsim);
+
+	int (*get_fb_frame_done)(void);
+	void (*trigger)(struct fb_info *info);
+};
+
+/*
+ * device structure for mipi-dsi based lcd panel.
+ *
+ * @name: name of the device to use with this device, or an
+ *	alias for that name.
+ * @id: id of device to be registered.
+ * @bus_id: bus id for identifing connected bus
+ *	and this bus id should be same as id of mipi_dsim_device.
+ * @master: pointer to mipi-dsi master device object.
+ * @platform_data: lcd panel specific platform data.
+ */
+struct mipi_dsim_lcd_device {
+	char			*name;
+	int			id;
+	int			bus_id;
+
+	struct mipi_dsim_device *master;
+	void			*platform_data;
+};
+
+/*
+ * driver structure for mipi-dsi based lcd panel.
+ *
+ * this structure should be registered by lcd panel driver.
+ * mipi-dsi driver seeks lcd panel registered through name field
+ * and calls these callback functions in appropriate time.
+ *
+ * @name: name of the driver to use with this device, or an
+ *	alias for that name.
+ * @id: id of driver to be registered.
+ *	this id would be used for finding device object registered.
+ * @mipi_panel_init: callback pointer for initializing lcd panel based on mipi
+ *	dsi interface.
+ * @mipi_display_on: callback pointer for lcd panel display on.
+ */
+struct mipi_dsim_lcd_driver {
+	char			*name;
+	int			id;
+
+	int	(*mipi_panel_init)(struct mipi_dsim_device *dsim_dev);
+	void	(*mipi_display_on)(struct mipi_dsim_device *dsim_dev);
+};
+
+int exynos_mipi_dsi_init(void);
+
+/*
+ * register mipi_dsim_lcd_driver object defined by lcd panel driver
+ * to mipi-dsi driver.
+ */
+int exynos_mipi_dsi_register_lcd_driver(struct mipi_dsim_lcd_driver
+						*lcd_drv);
+
+/*
+ * register mipi_dsim_lcd_device to mipi-dsi master.
+ */
+int exynos_mipi_dsi_register_lcd_device(struct mipi_dsim_lcd_device
+						*lcd_dev);
+
+void exynos_set_dsim_platform_data(struct exynos_platform_mipi_dsim *pd);
+
+/* panel driver init based on mipi dsi interface */
+void s6e8ax0_init(void);
+
+#endif /* _DSIM_H */
diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h
index fb442f7f1..6444fd04e 100644
--- a/arch/arm/include/asm/arch-exynos/power.h
+++ b/arch/arm/include/asm/arch-exynos/power.h
@@ -227,4 +227,10 @@ struct exynos4_power {
 };
 #endif	/* __ASSEMBLY__ */
 
+void set_mipi_phy_ctrl(unsigned int dev_index, unsigned int enable);
+
+#define EXYNOS_MIPI_PHY_ENABLE		(1 << 0)
+#define EXYNOS_MIPI_PHY_SRESETN		(1 << 1)
+#define EXYNOS_MIPI_PHY_MRESETN		(1 << 2)
+
 #endif
diff --git a/arch/arm/include/asm/arch-exynos/system.h b/arch/arm/include/asm/arch-exynos/system.h
new file mode 100644
index 000000000..c85f949da
--- /dev/null
+++ b/arch/arm/include/asm/arch-exynos/system.h
@@ -0,0 +1,53 @@
+/*
+ * (C) Copyright 2012 Samsung Electronics
+ * Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARM_ARCH_SYSTEM_H_
+#define __ASM_ARM_ARCH_SYSTEM_H_
+
+#ifndef __ASSEMBLY__
+struct exynos4_sysreg {
+	unsigned char	res1[0x210];
+	unsigned int	display_ctrl;
+	unsigned int	display_ctrl2;
+	unsigned int	camera_control;
+	unsigned int	audio_endian;
+	unsigned int	jtag_con;
+};
+
+struct exynos5_sysreg {
+	unsigned char	res1[0x214];
+	unsigned int	disp1blk_cfg;
+	unsigned int	disp2blk_cfg;
+	unsigned int	hdcp_e_fuse;
+	unsigned int	gsclblk_cfg0;
+	unsigned int	gsclblk_cfg1;
+	unsigned int	reserved;
+	unsigned int	ispblk_cfg;
+	unsigned int	usb20phy_cfg;
+	unsigned int	mipi_dphy;
+	unsigned int	dptx_dphy;
+	unsigned int	phyclk_sel;
+};
+#endif
+
+void set_system_display_ctrl(void);
+
+#endif	/* _EXYNOS4_SYSTEM_H */
diff --git a/arch/arm/include/asm/arch-exynos/tzpc.h b/arch/arm/include/asm/arch-exynos/tzpc.h
index 2c9a07be4..c5eb4b1cc 100644
--- a/arch/arm/include/asm/arch-exynos/tzpc.h
+++ b/arch/arm/include/asm/arch-exynos/tzpc.h
@@ -22,7 +22,7 @@
 #define __TZPC_H_
 
 #ifndef __ASSEMBLY__
-struct exynos5_tzpc {
+struct exynos_tzpc {
 	unsigned int r0size;
 	char res1[0x7FC];
 	unsigned int decprot0stat;