OMAP4 Ppanda: jenerate a unique usbethaddr

The panda board has a usb nic but the nic has no
rom.  Use the die-id to generate a unique address.
This is derived from an RFC kernel patch by Andy Green
that does the same thing:
	https://patchwork.kernel.org/patch/660541/

	[RFC PATCH 1/2] OMAP2+: add cpu id register to MAC address helper

Signed-off-by: John Rigby <john.rigby@linaro.org>

5 files changed, 72 insertions, 1 deletions

diff --git a/arch/arm/cpu/armv7/omap4/sys_info.c b/arch/arm/cpu/armv7/omap4/sys_info.c
index b9e57659f..7800d180a 100644
--- a/arch/arm/cpu/armv7/omap4/sys_info.c
+++ b/arch/arm/cpu/armv7/omap4/sys_info.c
@@ -23,6 +23,7 @@
  */
 
 #include <common.h>
+#include <asm/io.h>
 #include <asm/arch/sys_proto.h>
 
 /*
@@ -51,3 +52,43 @@ int print_cpuinfo(void)
 
 	return 0;
 }
+
+/*
+ * this uses the unique per-cpu info from the cpu fuses set at factory to
+ * generate a 6-byte MAC address.  Two bits in the generated code are used
+ * to elaborate the generated address into four, so it can be used on multiple
+ * network interfaces.
+ */
+
+void omap4_die_id_to_ethernet_mac(u8 *mac, int subtype)
+{
+	struct ctrl_id *id_base = (struct ctrl_id *)(CTRL_BASE + 0x200);
+	u32 idcode;
+	u32 id[4];
+
+	idcode = readl(&id_base->idcode);
+	id[0] = readl(&id_base->die_id_0);
+	id[1] = readl(&id_base->die_id_1);
+	id[2] = readl(&id_base->die_id_2);
+	id[3] = readl(&id_base->die_id_3);
+
+	mac[0] = id[2];
+	mac[1] = id[2] >> 8;
+	mac[2] = id[1];
+	mac[3] = id[1] >> 8;
+	mac[4] = id[1] >> 16;
+	mac[5] = id[1] >> 24;
+	/* XOR other chip-specific data with ID */
+	idcode ^= id[3];
+
+	mac[0] ^= idcode;
+	mac[1] ^= idcode >> 8;
+	mac[2] ^= idcode >> 16;
+	mac[3] ^= idcode >> 24;
+
+	/* allow four MACs from this same basic data */
+	mac[1] = (mac[1] & ~0xc0) | ((subtype & 3) << 6);
+
+	/* mark it as not multicast and outside official 80211 MAC namespace */
+	mac[0] = (mac[0] & ~1) | 2;
+}
diff --git a/arch/arm/include/asm/arch-omap4/cpu.h b/arch/arm/include/asm/arch-omap4/cpu.h
index 08b9c9935..f80701c76 100644
--- a/arch/arm/include/asm/arch-omap4/cpu.h
+++ b/arch/arm/include/asm/arch-omap4/cpu.h
@@ -94,6 +94,18 @@ struct gptimer {
 	u32 tcicr;		/* 0x40 rw */
 	u32 tcar2;		/* 0x44 r */
 };
+
+struct ctrl_id {
+	u32 die_id_0;		/* 0x00 */
+	u32 idcode;		/* 0x04 */
+	u32 die_id_1;		/* 0x08 */
+	u32 die_id_2;		/* 0x0c */
+	u32 die_id_3;		/* 0x10 */
+	u32 prod_id_0;		/* 0x14 */
+	u32 prod_id_1;		/* 0x18 */
+};
+
+
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL_STRICT_NAMES */
 
diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index a81f8e5c2..9a4a8eb0c 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -53,6 +53,7 @@ u32 omap4_ddr_clk(void);
 void cancel_out(u32 *num, u32 *den, u32 den_limit);
 void sdram_init(void);
 u32 omap4_sdram_size(void);
+void omap4_die_id_to_ethernet_mac(u8 *, int);
 
 static inline u32 running_from_sdram(void)
 {
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
index 9afed807b..6e6cffae6 100644
--- a/board/ti/panda/panda.c
+++ b/board/ti/panda/panda.c
@@ -48,8 +48,26 @@ int board_init(void)
 	return 0;
 }
 
+/*
+ * Panda has a usb nic with no ethernet rom so generate a macaddr
+ * from the SOC die-id and set the usbethaddr env var to that
+ * value.
+ */
 int board_eth_init(bd_t *bis)
 {
+	u8 macaddr[6];
+	char usbethaddr[20];
+
+	/*
+	 * NB: The 1 here has been found to generate an address
+	 * consistent with the kernel.
+	 */
+	omap4_die_id_to_ethernet_mac(macaddr, 1);
+	sprintf (usbethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
+		 macaddr[0], macaddr[1],
+		 macaddr[2], macaddr[3],
+		 macaddr[4], macaddr[5]) ;
+	setenv ("usbethaddr", usbethaddr);
 	return 0;
 }
 
diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
index da2097f90..d853fa545 100644
--- a/include/configs/omap4_panda.h
+++ b/include/configs/omap4_panda.h
@@ -174,7 +174,6 @@
 	"console=ttyS2,115200n8\0" \
 	"usbtty=cdc_acm\0" \
 	"vram=16M\0" \
-	"usbethaddr=00:02:03:04:05:06\0" \
 	"hostname=panda\0" \
 	"mmcdev=0\0" \
 	"mmcroot=/dev/mmcblk0p2 rw\0" \