aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-06-09 13:37:52 +0000
committerwdenk <wdenk>2004-06-09 13:37:52 +0000
commitf39748ae8edb03017647b0d731cdd06e7bdcde13 (patch)
tree1401c99d4d11bef3828da3bda191e8923f3f1147
parentaa24509041ff8a4892071c2abec023dddd53874f (diff)
downloadu-boot-linaro-stable-f39748ae8edb03017647b0d731cdd06e7bdcde13.tar.gz
* Patch by Paul Ruhland, 17 May 2004:
- Add support for the Logic Zoom LH7A40x based SDK board(s), specifically the LPD7A400. * Patches by Robert Schwebel, 15 May 2004: - call MAC address reading code also for SMSC91C111; - make SMSC91C111 timeout configurable, remove duplicate code - fix get_timer() for PXA - update doc/README.JFFS2 - use "bootfile" env variable also for jffs2
-rw-r--r--CHANGELOG11
-rw-r--r--CREDITS4
-rw-r--r--MAKEALL7
-rw-r--r--Makefile2
-rw-r--r--README20
-rw-r--r--board/lpd7a40x/Makefile47
-rw-r--r--board/lpd7a40x/config.mk38
-rw-r--r--board/lpd7a40x/flash.c494
-rw-r--r--board/lpd7a40x/lpd7a40x.c82
-rw-r--r--board/lpd7a40x/memsetup.S212
-rw-r--r--board/lpd7a40x/u-boot.lds56
-rw-r--r--common/cmd_jffs2.c8
-rw-r--r--cpu/lh7a40x/Makefile43
-rw-r--r--cpu/lh7a40x/config.mk27
-rw-r--r--cpu/lh7a40x/cpu.c183
-rw-r--r--cpu/lh7a40x/interrupts.c326
-rw-r--r--cpu/lh7a40x/serial.c183
-rw-r--r--cpu/lh7a40x/speed.c83
-rw-r--r--cpu/lh7a40x/start.S426
-rw-r--r--cpu/pxa/interrupts.c2
-rw-r--r--doc/README.JFFS24
-rw-r--r--drivers/smc91111.c47
-rw-r--r--include/bmp_logo.h2
-rw-r--r--include/common.h5
-rw-r--r--include/configs/innokom.h1
-rw-r--r--include/configs/lpd7a400-10.h80
-rw-r--r--include/configs/lpd7a400.h114
-rw-r--r--include/lh7a400.h93
-rw-r--r--include/lh7a40x.h258
-rw-r--r--include/lpd7a400_cpld.h195
-rw-r--r--lib_arm/board.c15
31 files changed, 3031 insertions, 37 deletions
diff --git a/CHANGELOG b/CHANGELOG
index dd4d246ce..404318148 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,17 @@
Changes since U-Boot 1.1.1:
======================================================================
+* Patch by Paul Ruhland, 17 May 2004:
+ - Add support for the Logic Zoom LH7A40x based SDK board(s),
+ specifically the LPD7A400.
+
+* Patches by Robert Schwebel, 15 May 2004:
+ - call MAC address reading code also for SMSC91C111;
+ - make SMSC91C111 timeout configurable, remove duplicate code
+ - fix get_timer() for PXA
+ - update doc/README.JFFS2
+ - use "bootfile" env variable also for jffs2
+
* Patch by Tolunay Orkun, 14 May 2004:
Add support for Cogent CSB472 board (8MB Flash Rev)
diff --git a/CREDITS b/CREDITS
index e23c58d94..8136e050c 100644
--- a/CREDITS
+++ b/CREDITS
@@ -358,3 +358,7 @@ W: www.elinos.com
N: Xianghua Xiao
E: x.xiao@motorola.com
D: Support for Motorola 85xx(PowerQUICC III) chip, MPC8540ADS and MPC8560ADS boards.
+
+N: Paul Ruhland
+E: pruhland@rochester.rr.com
+D: Port to Logic Zoom LH7A40x SDK board(s)
diff --git a/MAKEALL b/MAKEALL
index be108854b..7d0533149 100644
--- a/MAKEALL
+++ b/MAKEALL
@@ -139,9 +139,10 @@ LIST_ARM7="B2 ep7312 impa7"
LIST_ARM9=" \
at91rm9200dk integratorcp integratorap \
- omap1510inn omap1610h2 omap1610inn \
- omap730p2 smdk2400 smdk2410 \
- trab VCMA9 versatile \
+ lpd7a400 omap1510inn omap1610h2 \
+ omap1610inn omap730p2 smdk2400 \
+ smdk2410 trab VCMA9 \
+ versatile \
"
#########################################################################
diff --git a/Makefile b/Makefile
index 68e074539..71edd194d 100644
--- a/Makefile
+++ b/Makefile
@@ -1096,6 +1096,8 @@ trab_old_config: unconfig
VCMA9_config : unconfig
@./mkconfig $(@:_config=) arm arm920t vcma9 mpl
+lpd7a400_config: unconfig
+ @./mkconfig $(@:_config=) arm lh7a40x lpd7a40x
#########################################################################
## S3C44B0 Systems
diff --git a/README b/README
index db3e4f58b..21c7a5ce3 100644
--- a/README
+++ b/README
@@ -294,9 +294,9 @@ The following options need to be configured:
CONFIG_AT91RM9200DK, CONFIG_DNP1110, CONFIG_EP7312,
CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE, CONFIG_IMPA7,
CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610, CONFIG_LART,
- CONFIG_LUBBOCK, CONFIG_OSK_OMAP5912, CONFIG_SHANNON,
- CONFIG_P2_OMAP730, CONFIG_SMDK2400, CONFIG_SMDK2410,
- CONFIG_TRAB, CONFIG_VCMA9
+ CONFIG_LPD7A400 CONFIG_LUBBOCK, CONFIG_OSK_OMAP5912,
+ CONFIG_SHANNON, CONFIG_P2_OMAP730, CONFIG_SMDK2400,
+ CONFIG_SMDK2410, CONFIG_TRAB, CONFIG_VCMA9
MicroBlaze based boards:
------------------------
@@ -741,6 +741,20 @@ The following options need to be configured:
CONFIG_LAN91C96_USE_32_BIT
Define this to enable 32 bit addressing
+ CONFIG_DRIVER_SMC91111
+ Support for SMSC's LAN91C111 chip
+
+ CONFIG_SMC91111_BASE
+ Define this to hold the physical address
+ of the device (I/O space)
+
+ CONFIG_SMC_USE_32_BIT
+ Define this if data bus is 32 bits
+
+ CONFIG_SMC_USE_IOFUNCS
+ Define this to use i/o functions instead of macros
+ (some hardware wont work with macros)
+
- USB Support:
At the moment only the UHCI host controller is
supported (PIP405, MIP405, MPC5200); define
diff --git a/board/lpd7a40x/Makefile b/board/lpd7a40x/Makefile
new file mode 100644
index 000000000..f0999d173
--- /dev/null
+++ b/board/lpd7a40x/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := lpd7a40x.o flash.o
+SOBJS := memsetup.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/lpd7a40x/config.mk b/board/lpd7a40x/config.mk
new file mode 100644
index 000000000..bc03874a4
--- /dev/null
+++ b/board/lpd7a40x/config.mk
@@ -0,0 +1,38 @@
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+# Logic ZOOM LH7A400 SDK board w/Logic LH7A400-10 card engine
+# w/Sharp LH7A400 SoC (ARM920T) cpu
+#
+
+#
+# 32 or 64 MB SDRAM on SDCSC0 @ 0xc0000000
+#
+# Linux-Kernel is @ 0xC0008000, entry 0xc0008000
+# params @ 0xc0000100
+# optionally with a ramdisk at 0xc0300000
+#
+# we load ourself to 0xc1fc0000 (32M - 256K)
+#
+# download area is 0xc0f00000
+#
+
+TEXT_BASE = 0xc1fc0000
+#TEXT_BASE = 0x00000000
diff --git a/board/lpd7a40x/flash.c b/board/lpd7a40x/flash.c
new file mode 100644
index 000000000..26a9ce457
--- /dev/null
+++ b/board/lpd7a40x/flash.c
@@ -0,0 +1,494 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* #define DEBUG */
+
+#include <common.h>
+#include <environment.h>
+
+#define FLASH_BANK_SIZE 0x1000000 /* 16MB (2 x 8 MB) */
+#define MAIN_SECT_SIZE 0x40000 /* 256KB (2 x 128kB) */
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+
+#define CMD_READ_ARRAY 0x00FF00FF
+#define CMD_IDENTIFY 0x00900090
+#define CMD_ERASE_SETUP 0x00200020
+#define CMD_ERASE_CONFIRM 0x00D000D0
+#define CMD_PROGRAM 0x00400040
+#define CMD_RESUME 0x00D000D0
+#define CMD_SUSPEND 0x00B000B0
+#define CMD_STATUS_READ 0x00700070
+#define CMD_STATUS_RESET 0x00500050
+
+#define BIT_BUSY 0x00800080
+#define BIT_ERASE_SUSPEND 0x00400040
+#define BIT_ERASE_ERROR 0x00200020
+#define BIT_PROGRAM_ERROR 0x00100010
+#define BIT_VPP_RANGE_ERROR 0x00080008
+#define BIT_PROGRAM_SUSPEND 0x00040004
+#define BIT_PROTECT_ERROR 0x00020002
+#define BIT_UNDEFINED 0x00010001
+
+#define BIT_SEQUENCE_ERROR 0x00300030
+#define BIT_TIMEOUT 0x80000000
+
+/*-----------------------------------------------------------------------
+ */
+
+ulong flash_init (void)
+{
+ int i, j;
+ ulong size = 0;
+
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ ulong flashbase = 0;
+
+ flash_info[i].flash_id =
+ (INTEL_MANUFACT & FLASH_VENDMASK) |
+ (INTEL_ID_28F640J3A & FLASH_TYPEMASK);
+ flash_info[i].size = FLASH_BANK_SIZE;
+ flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+ memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+ if (i == 0)
+ flashbase = CFG_FLASH_BASE;
+ else
+ panic ("configured too many flash banks!\n");
+ for (j = 0; j < flash_info[i].sector_count; j++) {
+ flash_info[i].start[j] = flashbase;
+
+ /* uniform sector size */
+ flashbase += MAIN_SECT_SIZE;
+ }
+ size += flash_info[i].size;
+ }
+
+ /*
+ * Protect monitor and environment sectors
+ */
+ flash_protect ( FLAG_PROTECT_SET,
+ CFG_FLASH_BASE,
+ CFG_FLASH_BASE + monitor_flash_len - 1,
+ &flash_info[0]);
+
+ flash_protect ( FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+#ifdef CFG_ENV_ADDR_REDUND
+ flash_protect ( FLAG_PROTECT_SET,
+ CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
+ &flash_info[0]);
+#endif
+
+ return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+ int i;
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case (INTEL_MANUFACT & FLASH_VENDMASK):
+ printf ("Intel: ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case (INTEL_ID_28F640J3A & FLASH_TYPEMASK):
+ printf ("2x 28F640J3A (64Mbit)\n");
+ break;
+ default:
+ printf ("Unknown Chip Type\n");
+ return;
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; i++) {
+ if ((i % 5) == 0) {
+ printf ("\n ");
+ }
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+ }
+ printf ("\n");
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_error (ulong code)
+{
+ /* Check bit patterns */
+ /* SR.7=0 is busy, SR.7=1 is ready */
+ /* all other flags indicate error on 1 */
+ /* SR.0 is undefined */
+ /* Timeout is our faked flag */
+
+ /* sequence is described in Intel 290644-005 document */
+
+ /* check Timeout */
+ if (code & BIT_TIMEOUT) {
+ puts ("Timeout\n");
+ return ERR_TIMOUT;
+ }
+
+ /* check Busy, SR.7 */
+ if (~code & BIT_BUSY) {
+ puts ("Busy\n");
+ return ERR_PROG_ERROR;
+ }
+
+ /* check Vpp low, SR.3 */
+ if (code & BIT_VPP_RANGE_ERROR) {
+ puts ("Vpp range error\n");
+ return ERR_PROG_ERROR;
+ }
+
+ /* check Device Protect Error, SR.1 */
+ if (code & BIT_PROTECT_ERROR) {
+ puts ("Device protect error\n");
+ return ERR_PROG_ERROR;
+ }
+
+ /* check Command Seq Error, SR.4 & SR.5 */
+ if (code & BIT_SEQUENCE_ERROR) {
+ puts ("Command seqence error\n");
+ return ERR_PROG_ERROR;
+ }
+
+ /* check Block Erase Error, SR.5 */
+ if (code & BIT_ERASE_ERROR) {
+ puts ("Block erase error\n");
+ return ERR_PROG_ERROR;
+ }
+
+ /* check Program Error, SR.4 */
+ if (code & BIT_PROGRAM_ERROR) {
+ puts ("Program error\n");
+ return ERR_PROG_ERROR;
+ }
+
+ /* check Block Erase Suspended, SR.6 */
+ if (code & BIT_ERASE_SUSPEND) {
+ puts ("Block erase suspended\n");
+ return ERR_PROG_ERROR;
+ }
+
+ /* check Program Suspended, SR.2 */
+ if (code & BIT_PROGRAM_SUSPEND) {
+ puts ("Program suspended\n");
+ return ERR_PROG_ERROR;
+ }
+
+ /* OK, no error */
+ return ERR_OK;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+ ulong result, result1;
+ int iflag, prot, sect;
+ int rc = ERR_OK;
+
+#ifdef USE_920T_MMU
+ int cflag;
+#endif
+
+ debug ("flash_erase: s_first %d s_last %d\n", s_first, s_last);
+
+ /* first look for protection bits */
+
+ if (info->flash_id == FLASH_UNKNOWN)
+ return ERR_UNKNOWN_FLASH_TYPE;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ return ERR_INVAL;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) !=
+ (INTEL_MANUFACT & FLASH_VENDMASK)) {
+ return ERR_UNKNOWN_FLASH_VENDOR;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ /*
+ * Disable interrupts which might cause a timeout
+ * here. Remember that our exception vectors are
+ * at address 0 in the flash, and we don't want a
+ * (ticker) exception to happen while the flash
+ * chip is in programming mode.
+ */
+#ifdef USE_920T_MMU
+ cflag = dcache_status ();
+ dcache_disable ();
+#endif
+ iflag = disable_interrupts ();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
+
+ debug ("Erasing sector %2d @ %08lX... ",
+ sect, info->start[sect]);
+
+ /* arm simple, non interrupt dependent timer */
+ reset_timer();
+
+ if (info->protect[sect] == 0) { /* not protected */
+ vu_long *addr = (vu_long *) (info->start[sect]);
+ ulong bsR7, bsR7_2, bsR5, bsR5_2;
+ ulong tstart;
+
+ /* *addr = CMD_STATUS_RESET; */
+ *addr = CMD_ERASE_SETUP;
+ *addr = CMD_ERASE_CONFIRM;
+
+ /* wait until flash is ready */
+ tstart = get_timer(0);
+ do {
+ ulong now;
+ /* check timeout */
+ //if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+ if ((now = get_timer(tstart)) > CFG_FLASH_ERASE_TOUT) {
+ printf("tstart = 0x%08lx, now = 0x%08lx\n", tstart, now);
+ *addr = CMD_STATUS_RESET;
+ result = BIT_TIMEOUT;
+ break;
+ }
+
+ *addr = CMD_STATUS_READ;
+ result = *addr;
+ bsR7 = result & (1 << 7);
+ bsR7_2 = result & (1 << 23);
+ } while (!bsR7 | !bsR7_2);
+
+ *addr = CMD_STATUS_READ;
+ result1 = *addr;
+ bsR5 = result1 & (1 << 5);
+ bsR5_2 = result1 & (1 << 21);
+#ifdef SAMSUNG_FLASH_DEBUG
+ printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2);
+ if (bsR5 != 0 && bsR5_2 != 0)
+ printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2);
+#endif
+
+ *addr = CMD_READ_ARRAY;
+ *addr = CMD_RESUME;
+
+ if ((rc = flash_error (result)) != ERR_OK)
+ goto outahere;
+#if 0
+ printf ("ok.\n");
+ } else { /* it was protected */
+
+ printf ("protected!\n");
+#endif
+ }
+ }
+
+outahere:
+ /* allow flash to settle - wait 10 ms */
+ udelay_masked (10000);
+
+ if (iflag)
+ enable_interrupts ();
+
+#ifdef USE_920T_MMU
+ if (cflag)
+ dcache_enable ();
+#endif
+ return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash
+ */
+
+volatile static int write_word (flash_info_t * info, ulong dest,
+ ulong data)
+{
+ vu_long *addr = (vu_long *) dest;
+ ulong result;
+ int rc = ERR_OK;
+ int iflag;
+
+#ifdef USE_920T_MMU
+ int cflag;
+#endif
+
+ /*
+ * Check if Flash is (sufficiently) erased
+ */
+ result = *addr;
+ if ((result & data) != data)
+ return ERR_NOT_ERASED;
+
+ /*
+ * Disable interrupts which might cause a timeout
+ * here. Remember that our exception vectors are
+ * at address 0 in the flash, and we don't want a
+ * (ticker) exception to happen while the flash
+ * chip is in programming mode.
+ */
+#ifdef USE_920T_MMU
+ cflag = dcache_status ();
+ dcache_disable ();
+#endif
+ iflag = disable_interrupts ();
+
+ /* *addr = CMD_STATUS_RESET; */
+ *addr = CMD_PROGRAM;
+ *addr = data;
+
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked ();
+
+ /* wait until flash is ready */
+ do {
+ /* check timeout */
+ if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+ *addr = CMD_SUSPEND;
+ result = BIT_TIMEOUT;
+ break;
+ }
+
+ *addr = CMD_STATUS_READ;
+ result = *addr;
+ } while (~result & BIT_BUSY);
+
+ /* *addr = CMD_READ_ARRAY; */
+ *addr = CMD_STATUS_READ;
+ result = *addr;
+
+ rc = flash_error (result);
+
+ if (iflag)
+ enable_interrupts ();
+
+#ifdef USE_920T_MMU
+ if (cflag)
+ dcache_enable ();
+#endif
+ *addr = CMD_READ_ARRAY;
+ *addr = CMD_RESUME;
+ return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash.
+ */
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int l;
+ int i, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
+ data = (data >> 8) | (*(uchar *) cp << 24);
+ }
+ for (; i < 4 && cnt > 0; ++i) {
+ data = (data >> 8) | (*src++ << 24);
+ --cnt;
+ ++cp;
+ }
+ for (; cnt == 0 && i < 4; ++i, ++cp) {
+ data = (data >> 8) | (*(uchar *) cp << 24);
+ }
+
+ if ((rc = write_word (info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = *((vu_long *) src);
+ if ((rc = write_word (info, wp, data)) != 0) {
+ return (rc);
+ }
+ src += 4;
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return ERR_OK;
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
+ data = (data >> 8) | (*src++ << 24);
+ --cnt;
+ }
+ for (; i < 4; ++i, ++cp) {
+ data = (data >> 8) | (*(uchar *) cp << 24);
+ }
+
+ return write_word (info, wp, data);
+}
diff --git a/board/lpd7a40x/lpd7a40x.c b/board/lpd7a40x/lpd7a40x.c
new file mode 100644
index 000000000..8492df3d2
--- /dev/null
+++ b/board/lpd7a40x/lpd7a40x.c
@@ -0,0 +1,82 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#if defined(CONFIG_LH7A400)
+#include <lh7a400.h>
+#include <lpd7a400_cpld.h>
+#elif defined(CONFIG_LH7A404)
+#include <lh7a404.h>
+#include <lpd7a404_cpld.h>
+#else
+#error "No CPU defined!"
+#endif
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+int board_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /* set up the I/O ports */
+
+#if defined(CONFIG_LH7A400)
+
+ /* enable flash programming */
+ *(LPD7A400_CPLD_REGPTR(LPD7A400_CPLD_FLASH_REG)) |= FLASH_FPEN;
+
+ /* Auto wakeup, LCD disable, WLAN enable */
+ *(LPD7A400_CPLD_REGPTR(LPD7A400_CPLD_CECTL_REG)) &=
+ ~(CECTL_AWKP|CECTL_LCDV|CECTL_WLPE);
+
+ /* Status LED 2 on (leds are active low) */
+ *(LPD7A400_CPLD_REGPTR(LPD7A400_CPLD_EXTGPIO_REG)) =
+ (EXTGPIO_STATUS1|EXTGPIO_GPIO1) & ~(EXTGPIO_STATUS2);
+
+ /* arch number of Logic-Board - MACH_TYPE_LPD7A400 */
+ gd->bd->bi_arch_number = MACH_TYPE_LPD7A400;
+
+#elif defined(CONFIG_LH7A404)
+#endif
+
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = 0xc0000100;
+
+ return 0;
+}
+
+int dram_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+ return 0;
+}
diff --git a/board/lpd7a40x/memsetup.S b/board/lpd7a40x/memsetup.S
new file mode 100644
index 000000000..09ab5e74c
--- /dev/null
+++ b/board/lpd7a40x/memsetup.S
@@ -0,0 +1,212 @@
+/*
+ * Memory Setup - initialize memory controller(s) for devices required
+ * to boot and relocate
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <config.h>
+#include <version.h>
+
+
+/* memory controller */
+#define BCRX_DEFAULT (0x0000fbe0)
+#define BCRX_MW_8 (0x00000000)
+#define BCRX_MW_16 (0x10000000)
+#define BCRX_MW_32 (0x20000000)
+#define BCRX_PME (0x08000000)
+#define BCRX_WP (0x04000000)
+#define BCRX_WST2_SHIFT (11)
+#define BCRX_WST1_SHIFT (5)
+#define BCRX_IDCY_SHIFT (0)
+
+/* Bank0 Async Flash */
+#define BCR0 (0x80002000)
+#define BCR0_FLASH (BCRX_MW_32 | (0x08<<BCRX_WST2_SHIFT) | (0x0E<<BCRX_WST1_SHIFT))
+
+/* Bank1 Open */
+#define BCR1 (0x80002004)
+
+/* Bank2 Not used (EEPROM?) */
+#define BCR2 (0x80002008)
+
+/* Bank3 Not used */
+#define BCR3 (0x8000200C)
+
+/* Bank4 PC Card1 */
+
+/* Bank5 PC Card2 */
+
+/* Bank6 CPLD IO Controller Peripherals (slow) */
+#define BCR6 (0x80002018)
+#define BCR6_CPLD_SLOW (BCRX_DEFAULT | BCRX_MW_16)
+
+/* Bank7 CPLD IO Controller Peripherals (fast) */
+#define BCR7 (0x8000201C)
+#define BCR7_CPLD_FAST (BCRX_MW_16 | (0x16<<BCRX_WST2_SHIFT) | (0x16<<BCRX_WST1_SHIFT) | (0x2<<BCRX_IDCY_SHIFT))
+
+/* SDRAM */
+#define GBLCNFG (0x80002404)
+#define GC_CKE (0x80000000)
+#define GC_CKSD (0x40000000)
+#define GC_LCR (0x00000040)
+#define GC_SMEMBURST (0x00000020)
+#define GC_MRS (0x00000002)
+#define GC_INIT (0x00000001)
+
+#define GC_CMD_NORMAL (GC_CKE)
+#define GC_CMD_MODE (GC_CKE | GC_MRS)
+#define GC_CMD_SYNCFLASH_LOAD (GC_CKE | GC_MRS | GC_LCR)
+#define GC_CMD_PRECHARGEALL (GC_CKE | GC_INIT)
+#define GC_CMD_NOP (GC_CKE | GC_INIT | GC_MRS)
+
+#define RFSHTMR (0x80002408)
+#define RFSHTMR_INIT (10) /* period=100 ns, HCLK=100Mhz, (2048+1-15.6*66) */
+#define RFSHTMR_NORMAL (1500) /* period=15.6 us, HCLK=100Mhz, (2048+1-15.6*66) */
+
+#define SDCSCX_BASE (0x80002410)
+#define SDCSCX_DEFAULT (0x01220008)
+#define SDCSCX_AUTOPC (0x01000000)
+#define SDCSCX_RAS2CAS_2 (0x00200000)
+#define SDCSCX_RAS2CAS_3 (0x00300000)
+#define SDCSCX_WBL (0x00080000)
+#define SDCSCX_CASLAT_8 (0x00070000)
+#define SDCSCX_CASLAT_7 (0x00060000)
+#define SDCSCX_CASLAT_6 (0x00050000)
+#define SDCSCX_CASLAT_5 (0x00040000)
+#define SDCSCX_CASLAT_4 (0x00030000)
+#define SDCSCX_CASLAT_3 (0x00020000)
+#define SDCSCX_CASLAT_2 (0x00010000)
+#define SDCSCX_2KPAGE (0x00000040)
+#define SDCSCX_SROMLL (0x00000020)
+#define SDCSCX_SROM512 (0x00000010)
+#define SDCSCX_4BNK (0x00000008)
+#define SDCSCX_2BNK (0x00000000)
+#define SDCSCX_EBW_16 (0x00000004)
+#define SDCSCX_EBW_32 (0x00000000)
+
+#define SDRAM_BASE (0xC0000000)
+#define SDCSC_BANK_OFFSET (0x10000000)
+
+/*
+ * The SDRAM DEVICE MODE PROGRAMMING VALUE
+ */
+#define BURST_LENGTH_4 (0x010 << 10)
+#define BURST_LENGTH_8 (0x011 << 10)
+#define WBURST_LENGTH_BL (0x01 << 19)
+#define WBURST_LENGTH_SINGLE (0x01 << 19)
+#define CAS_2 (0x010 << 14)
+#define CAS_3 (0x011 << 14)
+#define BAT_SEQUENTIAL (0 << 13)
+#define BAT_INTERLEAVED (1 << 13)
+#define OPM_NORMAL (0x00 << 17)
+#define SDRAM_DEVICE_MODE (WBURST_LENGTH_BL|OPM_NORMAL|CAS_3|BAT_SEQUENTIAL|BURST_LENGTH_4)
+
+
+#define TIMER1_BASE (0x80000C00)
+
+/*
+ * special lookup flags
+ */
+#define DO_MEM_DELAY 1
+#define DO_MEM_READ 2
+
+_TEXT_BASE:
+ .word TEXT_BASE
+
+.globl memsetup
+memsetup:
+ mov r9, lr @ save return address
+
+ /* memory control configuration */
+ /* make r0 relative the current location so that it */
+ /* reads INITMEM_DATA out of FLASH rather than memory ! */
+ /* r0 = current word pointer */
+ /* r1 = end word location, one word past last actual word */
+ /* r3 = address for writes, special lookup flags */
+ /* r4 = value for writes, delay constants, or read addresses */
+ /* r2 = location for mem reads */
+
+ ldr r0, =INITMEM_DATA
+ ldr r1, _TEXT_BASE
+ sub r0, r0, r1
+ add r1, r0, #112
+
+mem_loop:
+ cmp r1, r0
+ moveq pc, r9 @ Done
+
+ ldr r3, [r0], #4 @ Fetch Destination Register Address, or 1 for delay
+ ldr r4, [r0], #4 @ value
+
+ cmp r3, #DO_MEM_DELAY
+ bleq mem_delay
+ beq mem_loop
+ cmp r3, #DO_MEM_READ
+ ldreq r2, [r4]
+ beq mem_loop
+ str r4, [r3] @ normal register/ram store
+ b mem_loop
+
+mem_delay:
+ ldr r5, =TIMER1_BASE
+ mov r6, r4, LSR #1 @ timer resolution is ~2us
+ str r6, [r5]
+ mov r6, #0x88 @ using 508.469KHz clock, enable
+ str r6, [r5, #8]
+0: ldr r6, [r5, #4] @ timer value
+ cmp r6, #0
+ bne 0b
+ mov r6, #0 @ disable timer
+ str r6, [r5, #8]
+ mov pc, lr
+
+ .ltorg
+/* the literal pools origin */
+
+INITMEM_DATA:
+ .word BCR0
+ .word BCR0_FLASH
+ .word BCR6
+ .word BCR6_CPLD_SLOW
+ .word BCR7
+ .word BCR7_CPLD_FAST
+ .word SDCSCX_BASE
+ .word (SDCSCX_RAS2CAS_3 | SDCSCX_CASLAT_3 | SDCSCX_SROMLL | SDCSCX_4BNK | SDCSCX_EBW_32)
+ .word GBLCNFG
+ .word GC_CMD_NOP
+ .word DO_MEM_DELAY
+ .word 200
+ .word GBLCNFG
+ .word GC_CMD_PRECHARGEALL
+ .word RFSHTMR
+ .word RFSHTMR_INIT
+ .word DO_MEM_DELAY
+ .word 8
+ .word RFSHTMR
+ .word RFSHTMR_NORMAL
+ .word GBLCNFG
+ .word GC_CMD_MODE
+ .word DO_MEM_READ
+ .word (SDRAM_BASE | SDRAM_DEVICE_MODE)
+ .word GBLCNFG
+ .word GC_CMD_NORMAL
+ .word SDCSCX_BASE
+ .word (SDCSCX_AUTOPC | SDCSCX_RAS2CAS_3 | SDCSCX_CASLAT_3 | SDCSCX_SROMLL | SDCSCX_4BNK | SDCSCX_EBW_32)
diff --git a/board/lpd7a40x/u-boot.lds b/board/lpd7a40x/u-boot.lds
new file mode 100644
index 000000000..719d8b19f
--- /dev/null
+++ b/board/lpd7a40x/u-boot.lds
@@ -0,0 +1,56 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/lh7a40x/start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+}
diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c
index 085781f74..207c211e8 100644
--- a/common/cmd_jffs2.c
+++ b/common/cmd_jffs2.c
@@ -126,7 +126,13 @@ do_jffs2_fsload(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
int jffs2_1pass_load(char *, struct part_info *,const char *);
char *fsname;
- char *filename = "uImage";
+ char *filename;
+
+ /* pre-set Boot file name */
+ if ((filename = getenv("bootfile")) == NULL) {
+ filename = "uImage";
+ }
+
ulong offset = load_addr;
int size;
struct part_info *part;
diff --git a/cpu/lh7a40x/Makefile b/cpu/lh7a40x/Makefile
new file mode 100644
index 000000000..b45bd6a29
--- /dev/null
+++ b/cpu/lh7a40x/Makefile
@@ -0,0 +1,43 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(CPU).a
+
+START = start.o
+OBJS = cpu.o speed.o interrupts.o serial.o
+
+all: .depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/cpu/lh7a40x/config.mk b/cpu/lh7a40x/config.mk
new file mode 100644
index 000000000..cef7d26f1
--- /dev/null
+++ b/cpu/lh7a40x/config.mk
@@ -0,0 +1,27 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \
+ -mshort-load-bytes -msoft-float
+
+PLATFORM_CPPFLAGS += -mapcs-32 -march=armv4
diff --git a/cpu/lh7a40x/cpu.c b/cpu/lh7a40x/cpu.c
new file mode 100644
index 000000000..2a2b57801
--- /dev/null
+++ b/cpu/lh7a40x/cpu.c
@@ -0,0 +1,183 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * CPU specific code
+ */
+
+#include <common.h>
+#include <command.h>
+#include <arm920t.h>
+
+/* read co-processor 15, register #1 (control register) */
+static unsigned long read_p15_c1 (void)
+{
+ unsigned long value;
+
+ __asm__ __volatile__(
+ "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n"
+ : "=r" (value)
+ :
+ : "memory");
+
+#ifdef MMU_DEBUG
+ printf ("p15/c1 is = %08lx\n", value);
+#endif
+ return value;
+}
+
+/* write to co-processor 15, register #1 (control register) */
+static void write_p15_c1 (unsigned long value)
+{
+#ifdef MMU_DEBUG
+ printf ("write %08lx to p15/c1\n", value);
+#endif
+ __asm__ __volatile__(
+ "mcr p15, 0, %0, c1, c0, 0 @ write it back\n"
+ :
+ : "r" (value)
+ : "memory");
+
+ read_p15_c1 ();
+}
+
+static void cp_delay (void)
+{
+ volatile int i;
+
+ /* copro seems to need some delay between reading and writing */
+ for (i = 0; i < 100; i++);
+}
+
+/* See also ARM Ref. Man. */
+#define C1_MMU (1<<0) /* mmu off/on */
+#define C1_ALIGN (1<<1) /* alignment faults off/on */
+#define C1_DC (1<<2) /* dcache off/on */
+#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */
+#define C1_SYS_PROT (1<<8) /* system protection */
+#define C1_ROM_PROT (1<<9) /* ROM protection */
+#define C1_IC (1<<12) /* icache off/on */
+#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */
+#define RESERVED_1 (0xf << 3) /* must be 111b for R/W */
+
+int cpu_init (void)
+{
+ /*
+ * setup up stacks if necessary
+ */
+#ifdef CONFIG_USE_IRQ
+ DECLARE_GLOBAL_DATA_PTR;
+
+ IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
+ FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
+#endif
+ return 0;
+}
+
+int cleanup_before_linux (void)
+{
+ /*
+ * this function is called just before we call linux
+ * it prepares the processor for linux
+ *
+ * we turn off caches etc ...
+ */
+
+ unsigned long i;
+
+ disable_interrupts ();
+
+ /* turn off I/D-cache */
+ asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
+ i &= ~(C1_DC | C1_IC);
+ asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
+
+ /* flush I/D-cache */
+ i = 0;
+ asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
+ return (0);
+}
+
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ extern void reset_cpu (ulong addr);
+
+ disable_interrupts ();
+ reset_cpu (0);
+ /*NOTREACHED*/
+ return (0);
+}
+
+void icache_enable (void)
+{
+ ulong reg;
+
+ reg = read_p15_c1 ();
+ cp_delay ();
+ write_p15_c1 (reg | C1_IC);
+}
+
+void icache_disable (void)
+{
+ ulong reg;
+
+ reg = read_p15_c1 ();
+ cp_delay ();
+ write_p15_c1 (reg & ~C1_IC);
+}
+
+int icache_status (void)
+{
+ return (read_p15_c1 () & C1_IC) != 0;
+}
+
+#ifdef USE_920T_MMU
+/* It makes no sense to use the dcache if the MMU is not enabled */
+void dcache_enable (void)
+{
+ ulong reg;
+
+ reg = read_p15_c1 ();
+ cp_delay ();
+ write_p15_c1 (reg | C1_DC);
+}
+
+void dcache_disable (void)
+{
+ ulong reg;
+
+ reg = read_p15_c1 ();
+ cp_delay ();
+ reg &= ~C1_DC;
+ write_p15_c1 (reg);
+}
+
+int dcache_status (void)
+{
+ return (read_p15_c1 () & C1_DC) != 0;
+}
+#endif
diff --git a/cpu/lh7a40x/interrupts.c b/cpu/lh7a40x/interrupts.c
new file mode 100644
index 000000000..2ebbe5635
--- /dev/null
+++ b/cpu/lh7a40x/interrupts.c
@@ -0,0 +1,326 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <arm920t.h>
+#include <lh7a40x.h>
+
+#include <asm/proc-armv/ptrace.h>
+
+extern void reset_cpu(ulong addr);
+static ulong timer_load_val = 0;
+
+/* macro to read the 16 bit timer */
+static inline ulong READ_TIMER(void)
+{
+ LH7A40X_TIMERS_PTR(timers);
+ lh7a40x_timer_t* timer = &timers->timer1;
+
+ return (timer->value & 0x0000ffff);
+}
+
+#ifdef CONFIG_USE_IRQ
+/* enable IRQ interrupts */
+void enable_interrupts (void)
+{
+ unsigned long temp;
+ __asm__ __volatile__("mrs %0, cpsr\n"
+ "bic %0, %0, #0x80\n"
+ "msr cpsr_c, %0"
+ : "=r" (temp)
+ :
+ : "memory");
+}
+
+
+/*
+ * disable IRQ/FIQ interrupts
+ * returns true if interrupts had been enabled before we disabled them
+ */
+int disable_interrupts (void)
+{
+ unsigned long old,temp;
+ __asm__ __volatile__("mrs %0, cpsr\n"
+ "orr %1, %0, #0xc0\n"
+ "msr cpsr_c, %1"
+ : "=r" (old), "=r" (temp)
+ :
+ : "memory");
+ return (old & 0x80) == 0;
+}
+#else
+void enable_interrupts (void)
+{
+ return;
+}
+int disable_interrupts (void)
+{
+ return 0;
+}
+#endif
+
+
+void bad_mode (void)
+{
+ panic ("Resetting CPU ...\n");
+ reset_cpu (0);
+}
+
+void show_regs (struct pt_regs *regs)
+{
+ unsigned long flags;
+ const char *processor_modes[] = {
+ "USER_26", "FIQ_26", "IRQ_26", "SVC_26",
+ "UK4_26", "UK5_26", "UK6_26", "UK7_26",
+ "UK8_26", "UK9_26", "UK10_26", "UK11_26",
+ "UK12_26", "UK13_26", "UK14_26", "UK15_26",
+ "USER_32", "FIQ_32", "IRQ_32", "SVC_32",
+ "UK4_32", "UK5_32", "UK6_32", "ABT_32",
+ "UK8_32", "UK9_32", "UK10_32", "UND_32",
+ "UK12_32", "UK13_32", "UK14_32", "SYS_32",
+ };
+
+ flags = condition_codes (regs);
+
+ printf ("pc : [<%08lx>] lr : [<%08lx>]\n"
+ "sp : %08lx ip : %08lx fp : %08lx\n",
+ instruction_pointer (regs),
+ regs->ARM_lr, regs->ARM_sp, regs->ARM_ip, regs->ARM_fp);
+ printf ("r10: %08lx r9 : %08lx r8 : %08lx\n",
+ regs->ARM_r10, regs->ARM_r9, regs->ARM_r8);
+ printf ("r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n",
+ regs->ARM_r7, regs->ARM_r6, regs->ARM_r5, regs->ARM_r4);
+ printf ("r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n",
+ regs->ARM_r3, regs->ARM_r2, regs->ARM_r1, regs->ARM_r0);
+ printf ("Flags: %c%c%c%c",
+ flags & CC_N_BIT ? 'N' : 'n',
+ flags & CC_Z_BIT ? 'Z' : 'z',
+ flags & CC_C_BIT ? 'C' : 'c', flags & CC_V_BIT ? 'V' : 'v');
+ printf (" IRQs %s FIQs %s Mode %s%s\n",
+ interrupts_enabled (regs) ? "on" : "off",
+ fast_interrupts_enabled (regs) ? "on" : "off",
+ processor_modes[processor_mode (regs)],
+ thumb_mode (regs) ? " (T)" : "");
+}
+
+void do_undefined_instruction (struct pt_regs *pt_regs)
+{
+ printf ("undefined instruction\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_software_interrupt (struct pt_regs *pt_regs)
+{
+ printf ("software interrupt\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_prefetch_abort (struct pt_regs *pt_regs)
+{
+ printf ("prefetch abort\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_data_abort (struct pt_regs *pt_regs)
+{
+ printf ("data abort\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_not_used (struct pt_regs *pt_regs)
+{
+ printf ("not used\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_fiq (struct pt_regs *pt_regs)
+{
+ printf ("fast interrupt request\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_irq (struct pt_regs *pt_regs)
+{
+ printf ("interrupt request\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+static ulong timestamp;
+static ulong lastdec;
+
+int interrupt_init (void)
+{
+ LH7A40X_TIMERS_PTR(timers);
+ lh7a40x_timer_t* timer = &timers->timer1;
+
+ /* a periodic timer using the 508kHz source */
+ timer->control = (TIMER_PER | TIMER_CLK508K);
+
+ if (timer_load_val == 0) {
+ /*
+ * 10ms period with 508.469kHz clock = 5084
+ */
+ timer_load_val = CFG_HZ/100;
+ }
+
+ /* load value for 10 ms timeout */
+ lastdec = timer->load = timer_load_val;
+
+ /* auto load, start timer */
+ timer->control = timer->control | TIMER_EN;
+ timestamp = 0;
+
+ return (0);
+}
+
+/*
+ * timer without interrupts
+ */
+
+void reset_timer (void)
+{
+ reset_timer_masked ();
+}
+
+ulong get_timer (ulong base)
+{
+ return (get_timer_masked() - base);
+}
+
+void set_timer (ulong t)
+{
+ timestamp = t;
+}
+
+void udelay (unsigned long usec)
+{
+ ulong tmo,tmp;
+
+ /* normalize */
+ if (usec >= 1000) {
+ tmo = usec / 1000;
+ tmo *= CFG_HZ;
+ tmo /= 1000;
+ }
+ else {
+ if (usec > 1) {
+ tmo = usec * CFG_HZ;
+ tmo /= (1000*1000);
+ }
+ else
+ tmo = 1;
+ }
+
+ /* check for rollover during this delay */
+ tmp = get_timer (0);
+ if ((tmp + tmo) < tmp )
+ reset_timer_masked(); /* timer would roll over */
+ else
+ tmo += tmp;
+
+ while (get_timer_masked () < tmo);
+}
+
+void reset_timer_masked (void)
+{
+ /* reset time */
+ lastdec = READ_TIMER();
+ timestamp = 0;
+}
+
+ulong get_timer_masked (void)
+{
+ ulong now = READ_TIMER();
+
+ if (lastdec >= now) {
+ /* normal mode */
+ timestamp += (lastdec - now);
+ } else {
+ /* we have an overflow ... */
+ timestamp += ((lastdec + timer_load_val) - now);
+ }
+ lastdec = now;
+
+ return timestamp;
+}
+
+void udelay_masked (unsigned long usec)
+{
+ ulong tmo;
+
+ /* normalize */
+ if (usec >= 1000) {
+ tmo = usec / 1000;
+ tmo *= CFG_HZ;
+ tmo /= 1000;
+ }
+ else {
+ if (usec > 1) {
+ tmo = usec * CFG_HZ;
+ tmo /= (1000*1000);
+ }
+ else
+ tmo = 1;
+ }
+
+ reset_timer_masked ();
+
+ while (get_timer_masked () < tmo);
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+ return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk (void)
+{
+ ulong tbclk;
+
+ tbclk = timer_load_val * 100;
+
+ return tbclk;
+}
diff --git a/cpu/lh7a40x/serial.c b/cpu/lh7a40x/serial.c
new file mode 100644
index 000000000..241d568ea
--- /dev/null
+++ b/cpu/lh7a40x/serial.c
@@ -0,0 +1,183 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <lh7a40x.h>
+
+#if defined(CONFIG_CONSOLE_UART1)
+# define UART_CONSOLE 1
+#elif defined(CONFIG_CONSOLE_UART2)
+# define UART_CONSOLE 2
+#elif defined(CONFIG_CONSOLE_UART3)
+# define UART_CONSOLE 3
+#else
+# error "No console configured ... "
+#endif
+
+void serial_setbrg (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ LH7A40X_UART_PTR(uart,UART_CONSOLE);
+ int i;
+ unsigned int reg = 0;
+
+ /*
+ * userguide 15.1.2.4
+ *
+ * BAUDDIV is (UART_REF_FREQ/(16 X BAUD))-1
+ *
+ * UART_REF_FREQ = external system clock input / 2 (Hz)
+ * BAUD is desired baudrate (bits/s)
+ *
+ * NOTE: we add (divisor/2) to numerator to round for
+ * more precision
+ */
+ reg = (((get_PLLCLK()/2) + ((16*gd->baudrate)/2)) / (16 * gd->baudrate)) - 1;
+ uart->brcon = reg;
+
+ for (i = 0; i < 100; i++);
+}
+
+/*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ *
+ */
+int serial_init (void)
+{
+ LH7A40X_UART_PTR(uart,UART_CONSOLE);
+
+ /* UART must be enabled before writing to any config registers */
+ uart->con |= (UART_EN);
+
+#ifdef CONFIG_CONSOLE_UART1
+ /* infrared disabled */
+ uart->con |= UART_SIRD;
+#endif
+ /* loopback disabled */
+ uart->con &= ~(UART_LBE);
+
+ /* modem lines and tx/rx polarities */
+ uart->con &= ~(UART_MXP | UART_TXP | UART_RXP);
+
+ /* FIFO enable, N81 */
+ uart->fcon = (UART_WLEN_8 | UART_FEN | UART_STP2_1);
+
+ /* set baudrate */
+ serial_setbrg ();
+
+ /* enable rx interrupt */
+ uart->inten |= UART_RI;
+
+ return (0);
+}
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise. When the function is succesfull, the character read is
+ * written into its argument c.
+ */
+int serial_getc (void)
+{
+ LH7A40X_UART_PTR(uart,UART_CONSOLE);
+
+ /* wait for character to arrive */
+ while (uart->status & UART_RXFE);
+
+ return(uart->data & 0xff);
+}
+
+#ifdef CONFIG_HWFLOW
+static int hwflow = 0; /* turned off by default */
+int hwflow_onoff(int on)
+{
+ switch(on) {
+ case 0:
+ default:
+ break; /* return current */
+ case 1:
+ hwflow = 1; /* turn on */
+ break;
+ case -1:
+ hwflow = 0; /* turn off */
+ break;
+ }
+ return hwflow;
+}
+#endif
+
+#ifdef CONFIG_MODEM_SUPPORT
+static int be_quiet = 0;
+void disable_putc(void)
+{
+ be_quiet = 1;
+}
+
+void enable_putc(void)
+{
+ be_quiet = 0;
+}
+#endif
+
+
+/*
+ * Output a single byte to the serial port.
+ */
+void serial_putc (const char c)
+{
+ LH7A40X_UART_PTR(uart,UART_CONSOLE);
+
+#ifdef CONFIG_MODEM_SUPPORT
+ if (be_quiet)
+ return;
+#endif
+
+ /* wait for room in the tx FIFO */
+ while (!(uart->status & UART_TXFE));
+
+#ifdef CONFIG_HWFLOW
+ /* Wait for CTS up */
+ while(hwflow && !(uart->status & UART_CTS));
+#endif
+
+ uart->data = c;
+
+ /* If \n, also do \r */
+ if (c == '\n')
+ serial_putc ('\r');
+}
+
+/*
+ * Test whether a character is in the RX buffer
+ */
+int serial_tstc (void)
+{
+ LH7A40X_UART_PTR(uart,UART_CONSOLE);
+
+ return(!(uart->status & UART_RXFE));
+}
+
+void
+serial_puts (const char *s)
+{
+ while (*s) {
+ serial_putc (*s++);
+ }
+}
diff --git a/cpu/lh7a40x/speed.c b/cpu/lh7a40x/speed.c
new file mode 100644
index 000000000..e80b046d3
--- /dev/null
+++ b/cpu/lh7a40x/speed.c
@@ -0,0 +1,83 @@
+/*
+ * (C) Copyright 2001-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, d.mueller@elsoft.ch
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <lh7a40x.h>
+
+
+/* ------------------------------------------------------------------------- */
+/* NOTE: This describes the proper use of this file.
+ *
+ * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL.
+ *
+ * get_FCLK(), get_HCLK(), get_PCLK() return the clock of
+ * the specified bus in HZ.
+ */
+/* ------------------------------------------------------------------------- */
+
+ulong get_PLLCLK (void)
+{
+ return CONFIG_SYS_CLK_FREQ;
+}
+
+/* return FCLK frequency */
+ulong get_FCLK (void)
+{
+ LH7A40X_CSC_PTR (csc);
+ ulong maindiv1, maindiv2, prediv, ps;
+
+ /*
+ * from userguide 6.1.1.2
+ *
+ * FCLK = ((MAINDIV1 +2) * (MAINDIV2 +2) * 14.7456MHz) /
+ * ((PREDIV+2) * (2^PS))
+ */
+ maindiv2 = (csc->clkset & CLKSET_MAINDIV2) >> 11;
+ maindiv1 = (csc->clkset & CLKSET_MAINDIV1) >> 7;
+ prediv = (csc->clkset & CLKSET_PREDIV) >> 2;
+ ps = (csc->clkset & CLKSET_PS) >> 16;
+
+ return (((maindiv2 + 2) * (maindiv1 + 2) * CONFIG_SYS_CLK_FREQ) /
+ ((prediv + 2) * (1 << ps)));
+}
+
+
+/* return HCLK frequency */
+ulong get_HCLK (void)
+{
+ LH7A40X_CSC_PTR (csc);
+
+ return (get_FCLK () / ((csc->clkset & CLKSET_HCLKDIV) + 1));
+}
+
+/* return PCLK frequency */
+ulong get_PCLK (void)
+{
+ LH7A40X_CSC_PTR (csc);
+
+ return (get_HCLK () /
+ (1 << (((csc->clkset & CLKSET_PCLKDIV) >> 16) + 1)));
+}
diff --git a/cpu/lh7a40x/start.S b/cpu/lh7a40x/start.S
new file mode 100644
index 000000000..160f889df
--- /dev/null
+++ b/cpu/lh7a40x/start.S
@@ -0,0 +1,426 @@
+/*
+ * armboot - Startup Code for ARM920 CPU-core
+ *
+ * Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
+ * Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
+ * Copyright (c) 2002 Gary Jennejohn <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <config.h>
+#include <version.h>
+
+
+/*
+ *************************************************************************
+ *
+ * Jump vector table as in table 3.1 in [1]
+ *
+ *************************************************************************
+ */
+
+
+.globl _start
+_start: b reset
+ ldr pc, _undefined_instruction
+ ldr pc, _software_interrupt
+ ldr pc, _prefetch_abort
+ ldr pc, _data_abort
+ ldr pc, _not_used
+ ldr pc, _irq
+ ldr pc, _fiq
+
+_undefined_instruction: .word undefined_instruction
+_software_interrupt: .word software_interrupt
+_prefetch_abort: .word prefetch_abort
+_data_abort: .word data_abort
+_not_used: .word not_used
+_irq: .word irq
+_fiq: .word fiq
+
+ .balignl 16,0xdeadbeef
+
+
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * do important init only if we don't start from memory!
+ * relocate armboot to ram
+ * setup stack
+ * jump to second stage
+ *
+ *************************************************************************
+ */
+
+_TEXT_BASE:
+ .word TEXT_BASE
+
+.globl _armboot_start
+_armboot_start:
+ .word _start
+
+/*
+ * These are defined in the board-specific linker script.
+ */
+.globl _bss_start
+_bss_start:
+ .word __bss_start
+
+.globl _bss_end
+_bss_end:
+ .word _end
+
+#ifdef CONFIG_USE_IRQ
+/* IRQ stack memory (calculated at run-time) */
+.globl IRQ_STACK_START
+IRQ_STACK_START:
+ .word 0x0badc0de
+
+/* IRQ stack memory (calculated at run-time) */
+.globl FIQ_STACK_START
+FIQ_STACK_START:
+ .word 0x0badc0de
+#endif
+
+
+/*
+ * the actual reset code
+ */
+
+reset:
+ /*
+ * set the cpu to SVC32 mode
+ */
+ mrs r0,cpsr
+ bic r0,r0,#0x1f
+ orr r0,r0,#0xd3
+ msr cpsr,r0
+
+#define pWDTCTL 0x80001400 /* Watchdog Timer control register */
+#define pINTENC 0x8000050C /* Interupt-Controller enable clear register */
+#define pCLKSET 0x80000420 /* clock divisor register */
+
+ /* disable watchdog, set watchdog control register to
+ * all zeros (default reset)
+ */
+ ldr r0, =pWDTCTL
+ mov r1, #0x0
+ str r1, [r0]
+
+ /*
+ * mask all IRQs by setting all bits in the INTENC register (default)
+ */
+ mov r1, #0xffffffff
+ ldr r0, =pINTENC
+ str r1, [r0]
+
+ /* FCLK:HCLK:PCLK = 1:2:2 */
+ /* default FCLK is 200 MHz, using 14.7456 MHz fin */
+ ldr r0, =pCLKSET
+ ldr r1, =0x0004ee39
+@ ldr r1, =0x0005ee39 @ 1: 2: 4
+ str r1, [r0]
+
+ /*
+ * we do sys-critical inits only at reboot,
+ * not when booting from ram!
+ */
+#ifdef CONFIG_INIT_CRITICAL
+ bl cpu_init_crit
+#endif
+
+relocate: /* relocate U-Boot to RAM */
+ adr r0, _start /* r0 <- current position of code */
+ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
+ cmp r0, r1 /* don't reloc during debug */
+ beq stack_setup
+
+ ldr r2, _armboot_start
+ ldr r3, _bss_start
+ sub r2, r3, r2 /* r2 <- size of armboot */
+ add r2, r0, r2 /* r2 <- source end address */
+
+copy_loop:
+ ldmia r0!, {r3-r10} /* copy from source address [r0] */
+ stmia r1!, {r3-r10} /* copy to target address [r1] */
+ cmp r0, r2 /* until source end addreee [r2] */
+ blt copy_loop /* a 'ble' here actually copies */
+ /* four bytes of bss */
+
+ /* Set up the stack */
+stack_setup:
+ ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */
+ sub r0, r0, #CFG_MALLOC_LEN /* malloc area */
+ sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */
+#ifdef CONFIG_USE_IRQ
+ sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
+#endif
+ sub sp, r0, #12 /* leave 3 words for abort-stack */
+
+clear_bss:
+ ldr r0, _bss_start /* find start of bss segment */
+ @add r0, r0, #4 /* start at first byte of bss */
+ /* why inc. 4 bytes past then? */
+ ldr r1, _bss_end /* stop here */
+ mov r2, #0x00000000 /* clear */
+
+clbss_l:str r2, [r0] /* clear loop... */
+ add r0, r0, #4
+ cmp r0, r1
+ bne clbss_l
+
+ ldr pc, _start_armboot
+
+_start_armboot: .word start_armboot
+
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+
+
+cpu_init_crit:
+ /*
+ * flush v4 I/D caches
+ */
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */
+ mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
+
+ /*
+ * disable MMU stuff and caches
+ */
+ mrc p15, 0, r0, c1, c0, 0
+ bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS)
+ bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM)
+ orr r0, r0, #0x00000002 @ set bit 2 (A) Align
+ orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache
+ orr r0, r0, #0x40000000 @ set bit 30 (nF) notFastBus
+ mcr p15, 0, r0, c1, c0, 0
+
+
+ /*
+ * before relocating, we have to setup RAM timing
+ * because memory timing is board-dependend, you will
+ * find a memsetup.S in your board directory.
+ */
+ mov ip, lr
+ bl memsetup
+ mov lr, ip
+
+ mov pc, lr
+
+
+/*
+ *************************************************************************
+ *
+ * Interrupt handling
+ *
+ *************************************************************************
+ */
+
+@
+@ IRQ stack frame.
+@
+#define S_FRAME_SIZE 72
+
+#define S_OLD_R0 68
+#define S_PSR 64
+#define S_PC 60
+#define S_LR 56
+#define S_SP 52
+
+#define S_IP 48
+#define S_FP 44
+#define S_R10 40
+#define S_R9 36
+#define S_R8 32
+#define S_R7 28
+#define S_R6 24
+#define S_R5 20
+#define S_R4 16
+#define S_R3 12
+#define S_R2 8
+#define S_R1 4
+#define S_R0 0
+
+#define MODE_SVC 0x13
+#define I_BIT 0x80
+
+/*
+ * use bad_save_user_regs for abort/prefetch/undef/swi ...
+ * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
+ */
+
+ .macro bad_save_user_regs
+ sub sp, sp, #S_FRAME_SIZE
+ stmia sp, {r0 - r12} @ Calling r0-r12
+ ldr r2, _armboot_start
+ sub r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
+ sub r2, r2, #(CFG_GBL_DATA_SIZE+8) @ set base 2 words into abort stack
+ ldmia r2, {r2 - r3} @ get pc, cpsr
+ add r0, sp, #S_FRAME_SIZE @ restore sp_SVC
+
+ add r5, sp, #S_SP
+ mov r1, lr
+ stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
+ mov r0, sp
+ .endm
+
+ .macro irq_save_user_regs
+ sub sp, sp, #S_FRAME_SIZE
+ stmia sp, {r0 - r12} @ Calling r0-r12
+ add r8, sp, #S_PC
+ stmdb r8, {sp, lr}^ @ Calling SP, LR
+ str lr, [r8, #0] @ Save calling PC
+ mrs r6, spsr
+ str r6, [r8, #4] @ Save CPSR
+ str r0, [r8, #8] @ Save OLD_R0
+ mov r0, sp
+ .endm
+
+ .macro irq_restore_user_regs
+ ldmia sp, {r0 - lr}^ @ Calling r0 - lr
+ mov r0, r0
+ ldr lr, [sp, #S_PC] @ Get PC
+ add sp, sp, #S_FRAME_SIZE
+ subs pc, lr, #4 @ return & move spsr_svc into cpsr
+ .endm
+
+ .macro get_bad_stack
+ ldr r13, _armboot_start @ setup our mode stack
+ sub r13, r13, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
+ sub r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+
+ str lr, [r13] @ save caller lr / spsr
+ mrs lr, spsr
+ str lr, [r13, #4]
+
+ mov r13, #MODE_SVC @ prepare SVC-Mode
+ @ msr spsr_c, r13
+ msr spsr, r13
+ mov lr, pc
+ movs pc, lr
+ .endm
+
+ .macro get_irq_stack @ setup IRQ stack
+ ldr sp, IRQ_STACK_START
+ .endm
+
+ .macro get_fiq_stack @ setup FIQ stack
+ ldr sp, FIQ_STACK_START
+ .endm
+
+/*
+ * exception handlers
+ */
+ .align 5
+undefined_instruction:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_undefined_instruction
+
+ .align 5
+software_interrupt:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_software_interrupt
+
+ .align 5
+prefetch_abort:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_prefetch_abort
+
+ .align 5
+data_abort:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_data_abort
+
+ .align 5
+not_used:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_not_used
+
+#ifdef CONFIG_USE_IRQ
+
+ .align 5
+irq:
+ get_irq_stack
+ irq_save_user_regs
+ bl do_irq
+ irq_restore_user_regs
+
+ .align 5
+fiq:
+ get_fiq_stack
+ /* someone ought to write a more effiction fiq_save_user_regs */
+ irq_save_user_regs
+ bl do_fiq
+ irq_restore_user_regs
+
+#else
+
+ .align 5
+irq:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_irq
+
+ .align 5
+fiq:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_fiq
+
+#endif
+
+ .align 5
+.globl reset_cpu
+reset_cpu:
+ bl disable_interrupts
+
+ /* Disable watchdog */
+ ldr r1, =pWDTCTL
+ mov r3, #0
+ str r3, [r1]
+
+ /* reset counter */
+ ldr r3, =0x00001984
+ str r3, [r1, #4]
+
+ /* Enable the watchdog */
+ mov r3, #1
+ str r3, [r1]
+
+_loop_forever:
+ b _loop_forever
diff --git a/cpu/pxa/interrupts.c b/cpu/pxa/interrupts.c
index b161b7468..8aec0b9dd 100644
--- a/cpu/pxa/interrupts.c
+++ b/cpu/pxa/interrupts.c
@@ -165,7 +165,7 @@ void reset_timer (void)
ulong get_timer (ulong base)
{
- return get_timer_masked ();
+ return get_timer_masked () - base;
}
void set_timer (ulong t)
diff --git a/doc/README.JFFS2 b/doc/README.JFFS2
index f85498455..270da9082 100644
--- a/doc/README.JFFS2
+++ b/doc/README.JFFS2
@@ -8,6 +8,7 @@ The module adds three new commands.
fsload - load binary file from a file system image
fsinfo - print information about file systems
ls - list files in a directory
+chpart - change active partition
If you boot from a partition which is mounted writable, and you
update your boot environment by replacing single files on that
@@ -68,9 +69,6 @@ jffs2_part_info(int part_num)
TODO.
- Add a new command so it's actually possible to change
- partition.
-
Remove the assumption that JFFS can dereference a pointer
into the disk. The current code do not work with memory holes
or hardware with a sliding window (PCMCIA).
diff --git a/drivers/smc91111.c b/drivers/smc91111.c
index 9f9f364f1..8b1103bb6 100644
--- a/drivers/smc91111.c
+++ b/drivers/smc91111.c
@@ -61,6 +61,7 @@
#include <common.h>
#include <command.h>
+#include <config.h>
#include "smc91111.h"
#include <net.h>
@@ -78,6 +79,11 @@ static const char version[] =
"smc91111.c:v1.0 04/25/01 by Daris A Nevil (dnevil@snmc.com)\n";
#endif
+/* Autonegotiation timeout in seconds */
+#ifndef CONFIG_SMC_AUTONEG_TIMEOUT
+#define CONFIG_SMC_AUTONEG_TIMEOUT 10
+#endif
+
/*------------------------------------------------------------------------
.
. Configuration options, for the experienced user to change.
@@ -353,7 +359,7 @@ static inline void smc_wait_mmu_release_complete (void)
*/
static void smc_reset (void)
{
- PRINTK2 ("%s:smc_reset\n", SMC_DEV_NAME);
+ PRINTK2 ("%s: smc_reset\n", SMC_DEV_NAME);
/* This resets the registers mostly to defaults, but doesn't
affect EEPROM. That seems unnecessary */
@@ -414,7 +420,7 @@ static void smc_reset (void)
*/
static void smc_enable()
{
- PRINTK2("%s:smc_enable\n", SMC_DEV_NAME);
+ PRINTK2("%s: smc_enable\n", SMC_DEV_NAME);
SMC_SELECT_BANK( 0 );
/* see the header file for options in TCR/RCR DEFAULT*/
SMC_outw( TCR_DEFAULT, TCR_REG );
@@ -440,7 +446,7 @@ static void smc_enable()
*/
static void smc_shutdown()
{
- PRINTK2(CARDNAME ":smc_shutdown\n");
+ PRINTK2(CARDNAME ": smc_shutdown\n");
/* no more interrupts for me */
SMC_SELECT_BANK( 2 );
@@ -489,7 +495,7 @@ static int smc_send_packet (volatile void *packet, int packet_length)
saved_pnr = SMC_inb( PN_REG );
saved_ptr = SMC_inw( PTR_REG );
- PRINTK3 ("%s:smc_hardware_send_packet\n", SMC_DEV_NAME);
+ PRINTK3 ("%s: smc_hardware_send_packet\n", SMC_DEV_NAME);
length = ETH_ZLEN < packet_length ? packet_length : ETH_ZLEN;
@@ -677,7 +683,7 @@ again:
*/
void smc_destructor()
{
- PRINTK2(CARDNAME ":smc_destructor\n");
+ PRINTK2(CARDNAME ": smc_destructor\n");
}
@@ -691,7 +697,7 @@ static int smc_open (bd_t * bd)
{
int i, err;
- PRINTK2 ("%s:smc_open\n", SMC_DEV_NAME);
+ PRINTK2 ("%s: smc_open\n", SMC_DEV_NAME);
/* reset the hardware */
smc_reset ();
@@ -764,7 +770,7 @@ static int smc_rcv()
return 0;
}
- PRINTK3("%s:smc_rcv\n", SMC_DEV_NAME);
+ PRINTK3("%s: smc_rcv\n", SMC_DEV_NAME);
/* start reading from the start of the packet */
SMC_outw( PTR_READ | PTR_RCV | PTR_AUTOINC, PTR_REG );
@@ -860,7 +866,7 @@ static int smc_rcv()
-----------------------------------------------------*/
static int smc_close()
{
- PRINTK2("%s:smc_close\n", SMC_DEV_NAME);
+ PRINTK2("%s: smc_close\n", SMC_DEV_NAME);
/* clear everything */
smc_shutdown();
@@ -1222,7 +1228,7 @@ static void smc_phy_configure ()
word status = 0; /*;my status = 0 */
int failed = 0;
- PRINTK3 ("%s:smc_program_phy()\n", SMC_DEV_NAME);
+ PRINTK3 ("%s: smc_program_phy()\n", SMC_DEV_NAME);
/* Get the detected phy address */
@@ -1286,8 +1292,8 @@ static void smc_phy_configure ()
/* the link does not come up. */
smc_read_phy_register(PHY_AD_REG);
- PRINTK2 ("%s:phy caps=%x\n", SMC_DEV_NAME, my_phy_caps);
- PRINTK2 ("%s:phy advertised caps=%x\n", SMC_DEV_NAME, my_ad_caps);
+ PRINTK2 ("%s: phy caps=%x\n", SMC_DEV_NAME, my_phy_caps);
+ PRINTK2 ("%s: phy advertised caps=%x\n", SMC_DEV_NAME, my_ad_caps);
/* Restart auto-negotiation process in order to advertise my caps */
smc_write_phy_register (PHY_CNTL_REG,
@@ -1296,8 +1302,9 @@ static void smc_phy_configure ()
/* Wait for the auto-negotiation to complete. This may take from */
/* 2 to 3 seconds. */
/* Wait for the reset to complete, or time out */
- timeout = 20; /* Wait up to 10 seconds */
+ timeout = CONFIG_SMC_AUTONEG_TIMEOUT * 2;
while (timeout--) {
+
status = smc_read_phy_register (PHY_STAT_REG);
if (status & PHY_STAT_ANEG_ACK) {
/* auto-negotiate complete */
@@ -1308,11 +1315,11 @@ static void smc_phy_configure ()
/* Restart auto-negotiation if remote fault */
if (status & PHY_STAT_REM_FLT) {
- printf ("%s:PHY remote fault detected\n",
+ printf ("%s: PHY remote fault detected\n",
SMC_DEV_NAME);
/* Restart auto-negotiation */
- printf ("%s:PHY restarting auto-negotiation\n",
+ printf ("%s: PHY restarting auto-negotiation\n",
SMC_DEV_NAME);
smc_write_phy_register (PHY_CNTL_REG,
PHY_CNTL_ANEG_EN |
@@ -1323,15 +1330,13 @@ static void smc_phy_configure ()
}
if (timeout < 1) {
- printf ("%s:PHY auto-negotiate timed out\n", SMC_DEV_NAME);
- printf ("%s:PHY auto-negotiate timed out\n", SMC_DEV_NAME);
+ printf ("%s: PHY auto-negotiate timed out\n", SMC_DEV_NAME);
failed = 1;
}
/* Fail if we detected an auto-negotiate remote fault */
if (status & PHY_STAT_REM_FLT) {
- printf ("%s:PHY remote fault detected\n", SMC_DEV_NAME);
- printf ("%s:PHY remote fault detected\n", SMC_DEV_NAME);
+ printf ("%s: PHY remote fault detected\n", SMC_DEV_NAME);
failed = 1;
}
@@ -1469,12 +1474,16 @@ int get_rom_mac (char *v_rom_mac)
return (1);
#else
int i;
+ int valid_mac = 0;
+
SMC_SELECT_BANK (1);
for (i=0; i<6; i++)
{
v_rom_mac[i] = SMC_inb (ADDR0_REG + i);
+ valid_mac |= v_rom_mac[i];
}
- return (1);
+
+ return (valid_mac ? 1 : 0);
#endif
}
#endif /* CONFIG_DRIVER_SMC91111 */
diff --git a/include/bmp_logo.h b/include/bmp_logo.h
index 265f744d0..9c924b859 100644
--- a/include/bmp_logo.h
+++ b/include/bmp_logo.h
@@ -18,7 +18,7 @@ unsigned short bmp_logo_palette[] = {
0x0343, 0x0454, 0x0565, 0x0565, 0x0676, 0x0787, 0x0898, 0x0999,
0x0AAA, 0x0ABA, 0x0BCB, 0x0CCC, 0x0DDD, 0x0EEE, 0x0FFF, 0x0FB3,
0x0FB4, 0x0FC4, 0x0FC5, 0x0FC6, 0x0FD7, 0x0FD8, 0x0FD9, 0x0FDA,
- 0x0FEA, 0x0FEB, 0x0FEC, 0x0FFD, 0x0FFE, 0x0FFF, 0x0FFF,
+ 0x0FEA, 0x0FEB, 0x0FEC, 0x0FFD, 0x0FFE, 0x0FFF, 0x0FFF,
};
unsigned char bmp_logo_bitmap[] = {
diff --git a/include/common.h b/include/common.h
index 8a81e435e..db1a114de 100644
--- a/include/common.h
+++ b/include/common.h
@@ -384,12 +384,15 @@ int prt_mpc5xxx_clks (void);
ulong get_OPB_freq (void);
ulong get_PCI_freq (void);
#endif
-#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410)
+#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || defined(CONFIG_LH7A40X)
ulong get_FCLK (void);
ulong get_HCLK (void);
ulong get_PCLK (void);
ulong get_UCLK (void);
#endif
+#if defined(CONFIG_LH7A40X)
+ulong get_PLLCLK (void);
+#endif
#if defined CONFIG_INCA_IP
uint incaip_get_cpuclk (void);
#endif
diff --git a/include/configs/innokom.h b/include/configs/innokom.h
index 77439e641..f88451922 100644
--- a/include/configs/innokom.h
+++ b/include/configs/innokom.h
@@ -140,6 +140,7 @@
#define CONFIG_SMC91111_BASE 0x14000000 /* chip select 5 */
#undef CONFIG_SMC_USE_32_BIT /* 16 bit bus access */
#undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */
+#define CONFIG_SMC_AUTONEG_TIMEOUT 10 /* timeout 10 seconds */
#undef CONFIG_SHOW_ACTIVITY
#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */
diff --git a/include/configs/lpd7a400-10.h b/include/configs/lpd7a400-10.h
new file mode 100644
index 000000000..ecf2b5ff8
--- /dev/null
+++ b/include/configs/lpd7a400-10.h
@@ -0,0 +1,80 @@
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Logic LH7A400-10 card engine
+ */
+
+#ifndef __LPD7A400_10_H
+#define __LPD7A400_10_H
+
+
+#define CONFIG_ARM920T 1 /* arm920t core */
+#define CONFIG_LH7A40X 1 /* Sharp LH7A400 SoC */
+#define CONFIG_LH7A400 1
+
+/* The system clock PLL input frequency */
+#define CONFIG_SYS_CLK_FREQ 14745600 /* System Clock PLL Input (Hz) */
+
+/* ticks per second */
+#define CFG_HZ (508469)
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
+
+#define CFG_FLASH_BASE 0x00000000 /* Flash Bank #1 */
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT (64) /* max number of sectors on one chip */
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */
+
+/*----------------------------------------------------------------------
+ * Using SMC91C111 LAN chip
+ *
+ * Default IO base of chip is 0x300, Card Engine has this address lines
+ * (LAN chip) tied to Vcc, so we just care about the chip select
+ */
+#define CONFIG_DRIVER_SMC91111
+#define CONFIG_SMC91111_BASE (0x70000000)
+#undef CONFIG_SMC_USE_32_BIT
+#define CONFIG_SMC_USE_IOFUNCS
+
+#endif /* __LPD7A400_10_H */
diff --git a/include/configs/lpd7a400.h b/include/configs/lpd7a400.h
new file mode 100644
index 000000000..3e915364b
--- /dev/null
+++ b/include/configs/lpd7a400.h
@@ -0,0 +1,114 @@
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __LPD7A400_H_
+#define __LPD7A400_H_
+
+/*
+ * If we are developing, we might want to start armboot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL /* undef for developing */
+
+#undef CONFIG_USE_IRQ
+
+#define MACH_TYPE_LPD7A400 389
+
+/*
+ * This board uses the logic LH7A400-10 card engine
+ */
+#include <configs/lpd7a400-10.h>
+
+#define CONFIG_LPD7A400 /* Logic LH7A400 SDK */
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_CONSOLE_UART2 /* UART2 LH7A40x for console */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_IPADDR 192.168.1.100
+#define CONFIG_NETMASK 255.255.1.0
+#define CONFIG_SERVERIP 192.168.1.1
+
+#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */
+
+#ifndef USE_920T_MMU
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING) & ~(CFG_CMD_CACHE))
+#else
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DATE)
+#endif
+
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY 3
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
+/* what's this ? it's not used anywhere */
+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "LPD7A400> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0xc0300000 /* memtest works on */
+#define CFG_MEMTEST_END 0xc0500000 /* 2 MB in DRAM */
+
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR 0xc0f00000 /* default load address */
+
+/* valid baudrates */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/* size and location of u-boot in flash */
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CFG_MONITOR_LEN (256<<10)
+
+#define CFG_ENV_IS_IN_FLASH 1
+
+/* Address and size of Primary Environment Sector */
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0xFC0000)
+#define CFG_ENV_SIZE 0x40000
+
+#endif /* __LPD7A400_H_ */
diff --git a/include/lh7a400.h b/include/lh7a400.h
new file mode 100644
index 000000000..e43667dc9
--- /dev/null
+++ b/include/lh7a400.h
@@ -0,0 +1,93 @@
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * lh7a400 SoC interface
+ */
+
+#ifndef __LH7A400_H__
+#define __LH7A400_H__
+
+#include "lh7a40x.h"
+
+/* Interrupt Controller (userguide 8.2.1) */
+typedef struct {
+ volatile u32 intsr;
+ volatile u32 intrsr;
+ volatile u32 intens;
+ volatile u32 intenc;
+ volatile u32 rsvd1;
+ volatile u32 rsvd2;
+ volatile u32 rsvd3;
+} /*__attribute__((__packed__))*/ lh7a400_interrupt_t;
+#define LH7A400_INTERRUPT_BASE (0x80000500)
+#define LH7A400_INTERRUPT_PTR(name) lh7a400_interrupt_t* name = (lh7a400_interrupt_t*) LH7A400_INTERRUPT_BASE
+
+/* (DMA) Direct Memory Access Controller (userguide 9.2.1) */
+typedef struct {
+ volatile u32 maxcnt;
+ volatile u32 base;
+ volatile u32 current;
+ volatile u32 rsvd1;
+} lh7a400_dmabuf_t;
+
+typedef struct {
+ volatile u32 control;
+ volatile u32 interrupt;
+ volatile u32 rsvd1;
+ volatile u32 status;
+ volatile u32 rsvd2;
+ volatile u32 remain;
+ volatile u32 rsvd3;
+ volatile u32 rsvd4;
+ lh7a400_dmabuf_t buf[2];
+} /*__attribute__((__packed__))*/ lh7a400_dmachan_t;
+
+typedef struct {
+ lh7a400_dmachan_t chan[15];
+ volatile u32 glblint;
+ volatile u32 rsvd1;
+ volatile u32 rsvd2;
+ volatile u32 rsvd3;
+} /*__attribute__((__packed__))*/ lh7a400_dma_t;
+#define LH7A400_DMA_BASE (0x80002800)
+#define DMA_USBTX_OFFSET (0x000)
+#define DMA_USBRX_OFFSET (0x040)
+#define DMA_MMCTX_OFFSET (0x080)
+#define DMA_MMCRX_OFFSET (0x0C0)
+#define DMA_AC97_BASE (0x80002A00)
+
+#define LH7A400_DMA_PTR(name) lh7a400_dma_t* name = (lh7a400_dma_t*) LH7A400_DMA_BASE
+#define LH7A400_DMA_USBTX(name) \
+ lh7a400_dmachan_t* name = (lh7a400_dmachan_t*) (LH7A400_DMA_BASE + DMA_USBTX_OFFSET)
+#define LH7A400_DMA_USBRX(name) \
+ lh7a400_dmachan_t* name = (lh7a400_dmachan_t*) (LH7A400_DMA_BASE + DMA_USBRX_OFFSET)
+#define LH7A400_DMA_MMCTX(name) \
+ lh7a400_dmachan_t* name = (lh7a400_dmachan_t*) (LH7A400_DMA_BASE + DMA_MMCTX_OFFSET)
+#define LH7A400_DMA_MMCRX(name) \
+ lh7a400_dmachan_t* name = (lh7a400_dmachan_t*) (LH7A400_DMA_BASE + DMA_MMCRX_OFFSET)
+#define LH7A400_AC97RX(name,n) \
+ lh7a400_dmachan_t* name = (lh7a400_dmachan_t*) (LH7A400_AC97_BASE + \
+ ((2*n) * sizeof(lh7a400_dmachan_t)))
+#define LH7A400_AC97TX(name,n) \
+ lh7a400_dmachan_t* name = (lh7a400_dmachan_t*) (LH7A400_AC97_BASE + \
+ (((2*n)+1) * sizeof(lh7a400_dmachan_t)))
+
+#endif /* __LH7A400_H__ */
diff --git a/include/lh7a40x.h b/include/lh7a40x.h
new file mode 100644
index 000000000..081009c32
--- /dev/null
+++ b/include/lh7a40x.h
@@ -0,0 +1,258 @@
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * lh7a40x SoC series common interface
+ */
+
+#ifndef __LH7A40X_H__
+#define __LH7A40X_H__
+
+/* (SMC) Static Memory Controller (usersguide 4.2.1) */
+typedef struct {
+ volatile u32 attib;
+ volatile u32 com;
+ volatile u32 io;
+ volatile u32 rsvd1;
+} /*__attribute__((__packed__))*/ lh7a40x_pccard_t;
+
+typedef struct {
+ volatile u32 bcr[8];
+ lh7a40x_pccard_t pccard[2];
+ volatile u32 pcmciacon;
+} /*__attribute__((__packed__))*/ lh7a40x_smc_t;
+#define LH7A40X_SMC_BASE (0x80002000)
+#define LH7A40X_SMC_PTR(name) lh7a40x_smc_t* name = (lh7a40x_smc_t*) LH7A40X_SMC_BASE
+
+/* (SDMC) Synchronous Dynamic Ram Controller (usersguide 5.3.1) */
+typedef struct {
+ volatile u32 rsvd1;
+ volatile u32 gblcnfg;
+ volatile u32 rfshtmr;
+ volatile u32 bootstat;
+ volatile u32 sdcsc[4];
+} /*__attribute__((__packed__))*/ lh7a40x_sdmc_t;
+#define LH7A40X_SDMC_BASE (0x80002400)
+#define LH7A40X_SDMC_PTR(name) lh7a40x_sdmc_t* name = (lh7a40x_sdmc_t*) LH7A40X_SDMC_BASE
+
+/* (CSC) Clock and State Controller (userguide 6.2.1) */
+typedef struct {
+ volatile u32 pwrsr;
+ volatile u32 pwrcnt;
+ volatile u32 halt;
+ volatile u32 stby;
+ volatile u32 bleoi;
+ volatile u32 mceoi;
+ volatile u32 teoi;
+ volatile u32 stfclr;
+ volatile u32 clkset;
+ volatile u32 scrreg[2];
+ volatile u32 rsvd1;
+ volatile u32 usbreset;
+} /*__attribute__((__packed__))*/ lh7a40x_csc_t;
+#define LH7A40X_STPWR_BASE (0x80000400)
+#define LH7A40X_CSC_PTR(name) lh7a40x_csc_t* name = (lh7a40x_csc_t*) LH7A40X_STPWR_BASE
+
+#define CLKSET_SMCROM (0x01000000)
+#define CLKSET_PS (0x000C0000)
+#define CLKSET_PS_0 (0x00000000)
+#define CLKSET_PS_1 (0x00040000)
+#define CLKSET_PS_2 (0x00080000)
+#define CLKSET_PS_3 (0x000C0000)
+#define CLKSET_PCLKDIV (0x00030000)
+#define CLKSET_PCLKDIV_2 (0x00000000)
+#define CLKSET_PCLKDIV_4 (0x00010000)
+#define CLKSET_PCLKDIV_8 (0x00020000)
+#define CLKSET_MAINDIV2 (0x0000f800)
+#define CLKSET_MAINDIV1 (0x00000780)
+#define CLKSET_PREDIV (0x0000007C)
+#define CLKSET_HCLKDIV (0x00000003)
+
+/* (WDT) Watchdog Timer (userguide 11.2.1) */
+typedef struct {
+ volatile u32 ctl;
+ volatile u32 rst;
+ volatile u32 status;
+ volatile u32 count[4];
+} /*__attribute__((__packed__))*/ lh7a40x_wdt_t;
+#define LH7A40X_WDT_BASE (0x80001400)
+#define LH7A40X_WDT_PTR(name) lh7a40x_wdt_t* name = (lh7a40x_wdt_t*) LH7A40X_WDT_BASE
+
+/* (RTC) Real Time Clock (lh7a400 userguide 12.2.1, lh7a404 userguide 13.2.1) */
+typedef struct {
+ volatile u32 rtcdr;
+ volatile u32 rtclr;
+ volatile u32 rtcmr;
+ volatile u32 unk1;
+ volatile u32 rtcstat_eoi;
+ volatile u32 rtccr;
+ volatile u32 rsvd1[58];
+} /*__attribute__((__packed__))*/ lh7a40x_rtc_t;
+#define LH7A40X_RTC_BASE (0x80000D00)
+#define LH7A40X_RTC_PTR(name) lh7a40x_rtc_t* name = (lh7a40x_rtc_t*) LH7A40X_RTC_BASE
+
+/* Timers (lh7a400 userguide 13.2.1, lh7a404 userguide 11.2.1) */
+typedef struct {
+ volatile u32 load;
+ volatile u32 value;
+ volatile u32 control;
+ volatile u32 tceoi;
+} /*__attribute__((__packed__))*/ lh7a40x_timer_t;
+
+typedef struct {
+ lh7a40x_timer_t timer1;
+ volatile u32 rsvd1[4];
+ lh7a40x_timer_t timer2;
+ volatile u32 unk1[4];
+ volatile u32 bzcon;
+ volatile u32 unk2[15];
+ lh7a40x_timer_t timer3;
+ /*volatile u32 rsvd2;*/
+} /*__attribute__((__packed__))*/ lh7a40x_timers_t;
+#define LH7A40X_TIMERS_BASE (0x80000C00)
+#define LH7A40X_TIMERS_PTR(name) lh7a40x_timers_t* name = (lh7a40x_timers_t*) LH7A40X_TIMERS_BASE
+
+#define TIMER_EN (0x00000080)
+#define TIMER_PER (0x00000040)
+#define TIMER_FREE (0x00000000)
+#define TIMER_CLK508K (0x00000008)
+#define TIMER_CLK2K (0x00000000)
+
+/* (SSP) Sychronous Serial Ports (lh7a400 userguide 14.2.1, lh7a404 userguide 14.2.1) */
+typedef struct {
+ volatile u32 cr0;
+ volatile u32 cr1;
+ volatile u32 irr_roeoi;
+ volatile u32 dr;
+ volatile u32 cpr;
+ volatile u32 sr;
+ /*volatile u32 rsvd1[58];*/
+} /*__attribute__((__packed__))*/ lh7a40x_ssp_t;
+#define LH7A40X_SSP_BASE (0x80000B00)
+#define LH7A40X_SSP_PTR(name) lh7a40x_ssp_t* name = (lh7a40x_ssp_t*) LH7A40X_SSP_BASE
+
+/* (UART) Universal Asychronous Receiver/Transmitter (lh7a400 userguide 15.2.1, lh7a404 userguide 15.2.1) */
+typedef struct {
+ volatile u32 data;
+ volatile u32 fcon;
+ volatile u32 brcon;
+ volatile u32 con;
+ volatile u32 status;
+ volatile u32 rawisr;
+ volatile u32 inten;
+ volatile u32 isr;
+ volatile u32 rsvd1[56];
+} /*__attribute__((__packed__))*/ lh7a40x_uart_t;
+#define LH7A40X_UART_BASE (0x80000600)
+#define LH7A40X_UART_PTR(name,n) \
+ lh7a40x_uart_t* name = (lh7a40x_uart_t*) (LH7A40X_UART_BASE + ((n-1) * sizeof(lh7a40x_uart_t)))
+
+#define UART_BE (0x00000800) /* the rx error bits */
+#define UART_OE (0x00000400)
+#define UART_PE (0x00000200)
+#define UART_FE (0x00000100)
+
+#define UART_WLEN (0x00000060) /* fcon bits */
+#define UART_WLEN_8 (0x00000060)
+#define UART_WLEN_7 (0x00000040)
+#define UART_WLEN_6 (0x00000020)
+#define UART_WLEN_5 (0x00000000)
+#define UART_FEN (0x00000010)
+#define UART_STP2 (0x00000008)
+#define UART_STP2_2 (0x00000008)
+#define UART_STP2_1 (0x00000000)
+#define UART_EPS (0x00000004)
+#define UART_EPS_EVEN (0x00000004)
+#define UART_EPS_ODD (0x00000000)
+#define UART_PEN (0x00000002)
+#define UART_BRK (0x00000001)
+
+#define UART_BAUDDIV (0x0000ffff) /* brcon bits */
+
+#define UART_SIRBD (0x00000080) /* con bits */
+#define UART_LBE (0x00000040)
+#define UART_MXP (0x00000020)
+#define UART_TXP (0x00000010)
+#define UART_RXP (0x00000008)
+#define UART_SIRLP (0x00000004)
+#define UART_SIRD (0x00000002)
+#define UART_EN (0x00000001)
+
+#define UART_TXFE (0x00000080) /* status bits */
+#define UART_RXFF (0x00000040)
+#define UART_TXFF (0x00000020)
+#define UART_RXFE (0x00000010)
+#define UART_BUSY (0x00000008)
+#define UART_DCD (0x00000004)
+#define UART_DSR (0x00000002)
+#define UART_CTS (0x00000001)
+
+#define UART_MSEOI (0xfffffff0) /* rawisr interrupt bits */
+
+#define UART_RTI (0x00000008) /* generic interrupt bits */
+#define UART_MI (0x00000004)
+#define UART_TI (0x00000002)
+#define UART_RI (0x00000001)
+
+/* (GPIO) General Purpose IO and External Interrupts (userguide 16.2.1) */
+typedef struct {
+ volatile u32 pad;
+ volatile u32 pbd;
+ volatile u32 pcd;
+ volatile u32 pdd;
+ volatile u32 padd;
+ volatile u32 pbdd;
+ volatile u32 pcdd;
+ volatile u32 pddd;
+ volatile u32 ped;
+ volatile u32 pedd;
+ volatile u32 kbdctl;
+ volatile u32 pinmux;
+ volatile u32 pfd;
+ volatile u32 pfdd;
+ volatile u32 pgd;
+ volatile u32 pgdd;
+ volatile u32 phd;
+ volatile u32 phdd;
+ volatile u32 rsvd1;
+ volatile u32 inttype1;
+ volatile u32 inttype2;
+ volatile u32 gpiofeoi;
+ volatile u32 gpiointen;
+ volatile u32 intstatus;
+ volatile u32 rawintstatus;
+ volatile u32 gpiodb;
+ volatile u32 papd;
+ volatile u32 pbpd;
+ volatile u32 pcpd;
+ volatile u32 pdpd;
+ volatile u32 pepd;
+ volatile u32 pfpd;
+ volatile u32 pgpd;
+ volatile u32 phpd;
+} /*__attribute__((__packed__))*/ lh7a40x_gpioint_t;
+#define LH7A40X_GPIOINT_BASE (0x80000E00)
+#define LH7A40X_GPIOINT_PTR(name) lh7a40x_gpioint_t* name = (lh7a40x_gpioint_t*) LH7A40X_GPIOINT_BASE
+
+/* Embedded SRAM */
+#define CFG_SRAM_BASE (0xB0000000)
+#define CFG_SRAM_SIZE (80*1024) /* 80kB */
+
+#endif /* __LH7A40X_H__ */
diff --git a/include/lpd7a400_cpld.h b/include/lpd7a400_cpld.h
new file mode 100644
index 000000000..c70af09e6
--- /dev/null
+++ b/include/lpd7a400_cpld.h
@@ -0,0 +1,195 @@
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Logic lh7a400-10 Card Engine CPLD interface
+ */
+
+#ifndef __LPD7A400_CPLD_H_
+#define __LPD7A400_CPLD_H_
+
+
+/*
+ * IO Controller Address and Register Definitions
+ * - using LH7A400-10 Card Engine IO Controller Specification
+ * (logic PN: 70000079)
+ */
+
+/*------------------------------------------------------------------
+ * Slow Peripherals (nCS6)
+ */
+#define LPD7A400_CPLD_CF (0x60200000)
+#define LPD7A400_CPLD_ISA (0x60400000)
+
+/*------------------------------------------------------------------
+ * Fast Peripherals (nCS7)
+ *
+ * The CPLD directs access to 0x70000000-0x701fffff to the onboard
+ * ethernet controller
+ */
+#define LPD7A400_CPLD_WLAN_BASE (0x70000000)
+
+/* All registers are 8 bit */
+#define LPD7A400_CPLD_CECTL_REG (0x70200000)
+#define LPD7A400_CPLD_SPIDATA_REG (0x70600000)
+#define LPD7A400_CPLD_SPICTL_REG (0x70800000)
+#define LPD7A400_CPLD_EEPSPI_REG (0x70a00000)
+#define LPD7A400_CPLD_INTMASK_REG (0x70c00000)
+#define LPD7A400_CPLD_MODE_REG (0x70e00000)
+#define LPD7A400_CPLD_FLASH_REG (0x71000000)
+#define LPD7A400_CPLD_PWRMG_REG (0x71200000)
+#define LPD7A400_CPLD_REV_REG (0x71400000)
+#define LPD7A400_CPLD_EXTGPIO_REG (0x71600000)
+#define LPD7A400_CPLD_GPIODATA_REG (0x71800000)
+#define LPD7A400_CPLD_GPIODIR_REG (0x71a00000)
+
+#define LPD7A400_CPLD_REGPTR (volatile u8*)
+
+/* Card Engine Control Register (section 3.1.2) */
+#define CECTL_SWINT (0x80) /* Software settable interrupt source
+ (routed to uP PF3)
+ 0 = generate interrupt, 1 = do not */
+#define CECTL_OCMSK (0x40) /* USB1 connection interrupt mask
+ 0 = not masked, 1 = masked */
+#define CECTL_PDRV (0x20) /* PCC_nDRV output
+ 0 = active, 1 = inactive */
+#define CECTL_USB1C (0x10) /* USB1 connection interrupt
+ 0 = active, 1 = inactive */
+#define CECTL_USB1P (0x08) /* USB1 Power enable
+ 0 = enabled, 1 = disabled */
+#define CECTL_AWKP (0x04) /* Auto-Wakeup enable
+ 0 = enabled, 1 = disabled */
+#define CECTL_LCDV (0x02) /* LCD VEE enable
+ 0 = disabled, 1 = enabled */
+#define CECTL_WLPE (0x01) /* Wired LAN power enable
+ 0 = enabled, 1 = disabled */
+
+/* SPI Control Register (section 3.1.5) */
+#define SPICTL_SPLD (0x20) /* SPI load (R)
+ 0 = data reg. has not been loaded, shift
+ count has not been reset
+ 1 = data reg. loaded, shift count reset */
+#define SPICTL_SPST (0x10) /* SPI start (RW)
+ 0 = don't load data reg. and reset shift count
+ 1 = ready to load data reg and reset shift count */
+#define SPICTL_SPDN (0x08) /* SPI done (R)
+ 0 = not done
+ 1 = access done */
+#define SPICTL_SPRW (0x04) /* SPI read/write (RW)
+ 0 = SPI write access
+ 1 = SPI read access */
+#define SPICTL_STCS (0x02) /* SPI touch chip select (RW)
+ 0 = not selected
+ 1 = selected */
+#define SPICTL_SCCS (0x01) /* SPI CODEC chip select (RW) {not used}
+ 0 = not selected
+ 1 = selected */
+
+/* EEPROM SPI Interface Register (section 3.1.6) */
+#define EEPSPI_EECS (0x08) /* EEPROM chip select (RW)
+ 0 = not selected
+ 1 = selected */
+#define EEPSPI_EECK (0x04) /* EEPROM SPI clock (RW) */
+#define EEPSPI_EETX (0x02) /* EEPROM SPI tx data (RW) */
+#define EEPSPI_EERX (0x01) /* EEPROM SPI rx data (R) */
+
+/* Interrupt/Mask Register (section 3.1.7) */
+#define INTMASK_CMSK (0x80) /* CPLD_nIRQD interrupt mask (RW)
+ 0 = not masked
+ 1 = masked */
+#define INTMASK_CIRQ (0x40) /* interrupt signal to CPLD (R)
+ 0 = interrupt active
+ 1 = no interrupt */
+#define INTMASK_PIRQ (0x10) /* legacy, no effect */
+#define INTMASK_TMSK (0x08) /* Touch chip interrupt mask (RW)
+ 0 = not masked
+ 1 = masked */
+#define INTMASK_WMSK (0x04) /* Wired LAN interrupt mask (RW)
+ 0 = not masked
+ 1 = masked */
+#define INTMASK_TIRQ (0x02) /* Touch chip interrupt request (R)
+ 0 = interrupt active
+ 1 = no interrupt */
+#define INTMASK_WIRQ (0x01) /* Wired LAN interrupt request (R)
+ 0 = interrupt active
+ 1 = no interrupt */
+
+/* Mode Register (section 3.1.8) */
+#define MODE_VS1 (0x80) /* PCMCIA Voltage Sense 1 input (PCC_VS1) (R)
+ 0 = active slot VS1 pin is low
+ 1 = active slot VS1 pin is high */
+#define MODE_CD2 (0x40) /* PCMCIA Card Detect 2 input (PCC_nCD2) (R)
+ 0 = active slot CD2 is low
+ 1 = active slot CD2 is high */
+#define MODE_IOIS16 (0x20) /* PCMCIA IOIS16 input (PCC_nIOIS16) (R)
+ 0 = 16 bit access area
+ 1 = 8 bit access area */
+#define MODE_CD1 (0x10) /* PCMCIA Card Detect 1 input (PCC_nCD1) (R)
+ 0 = active slot CD1 is low
+ 1 = active slot CD1 is high */
+#define MODE_upMODE3 (0x08) /* Mode Pin 3 (R)
+ 0 = off-board boot device
+ 1 = on-board boot device (flash) */
+#define MODE_upMODE2 (0x04) /* Mode Pin 2 (R) (LH7A400 Little Endian only)
+ 0 = big endian
+ 1 = little endian */
+#define MODE_upMODE1 (0x02) /* Mode Pin 1 and Mode Pin 2 (R) */
+#define MODE_upMODE0 (0x01) /* - bus width at boot */
+
+
+/* Flash Register (section 3.1.9) */
+#define FLASH_FPOP (0x08) /* Flash populated (RW)
+ 0 = populated, 1 = not */
+#define FLASH_FST2 (0x04) /* Flash status (R) (RY/BY# pin for upper 16 bit chip
+ 0 = busy, 1 = ready */
+#define FLASH_FST1 (0x02) /* Flash status (R) (RY/BY# pin for lower 16 bit chip
+ 0 = busy, 1 = ready */
+#define FLASH_FPEN (0x01) /* Flash program enable (RW)
+ 0 = flash write protected
+ 1 = programming enabled */
+
+/* Power Management Register (section 3.1.10)
+ * - when either of these is low an unmaskable interrupt to cpu
+ * is generated
+ */
+#define PWRMG_STBY (0x10) /* state of nSTANDBY signal to CPLD (R)
+ 0 = low, 1 = high */
+#define PWRMG_SPND (0x04) /* state of nSUSPEND signal to CPLD (R)
+ 0 = low, 1 = high */
+
+
+/* Extended GPIO Register (section 3.1.12) */
+#define EXTGPIO_STATUS1 (0x04) /* Status 1 output (RW) (uP_STATUS_1)
+ 0 = set pin low, 1 = set pin high */
+#define EXTGPIO_STATUS2 (0x02) /* Status 2 output (RW) (uP_STATUS_2)
+ 0 = set pin low, 1 = set pin high */
+#define EXTGPIO_GPIO1 (0x01) /* General purpose output (RW) (CPLD_GPIO_1)
+ 0 = set pin low, 1 = set pin high */
+
+/* GPIO Data Register (section 3.1.13) */
+#define GPIODATA_GPIO2 (0x01) /* General purpose input/output (RW) (CPLD_GPIO_2)
+ 0 = set low (output) / read low (input)
+ 1 = set high (output) / read high (input) */
+
+/* GPIO Direction Register (section 3.1.14) */
+#define GPIODIR_GPDR0 (0x01) /* GPIO2 direction (RW)
+ 0 = output, 1 = input */
+
+#endif /* __LH7A400_H__ */
diff --git a/lib_arm/board.c b/lib_arm/board.c
index 193980eff..bba944af3 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -32,6 +32,13 @@
#include <version.h>
#include <net.h>
+#ifdef CONFIG_DRIVER_SMC91111
+#include "../drivers/smc91111.h"
+#endif
+#ifdef CONFIG_DRIVER_LAN91C96
+#include "../drivers/lan91c96.h"
+#endif
+
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
void nand_init (void);
#endif
@@ -58,9 +65,6 @@ extern void cs8900_get_enetaddr (uchar * addr);
extern void rtl8019_get_enetaddr (uchar * addr);
#endif
-#ifdef CONFIG_DRIVER_LAN91C96
-#include "../drivers/lan91c96.h"
-#endif
/*
* Begin and End of memory area for malloc(), and current "brk"
*/
@@ -302,11 +306,12 @@ void start_armboot (void)
cs8900_get_enetaddr (gd->bd->bi_enetaddr);
#endif
-#ifdef CONFIG_DRIVER_LAN91C96
+#if defined(CONFIG_DRIVER_SMC91111) || defined (CONFIG_DRIVER_LAN91C96)
if (getenv ("ethaddr")) {
smc_set_mac_addr(gd->bd->bi_enetaddr);
}
-#endif /* CONFIG_DRIVER_LAN91C96 */
+ eth_init(gd->bd);
+#endif /* CONFIG_DRIVER_SMC91111 || CONFIG_DRIVER_LAN91C96 */
/* Initialize from environment */
if ((s = getenv ("loadaddr")) != NULL) {