snowball: igloo copy port of board specific files

Signed-off-by: Per Forlin <per.forlin@linaro.org>

remove snowball specific mmc driver and use pl180_mmci

Signed-off-by: John Rigby <john.rigby@linaro.org>

4 files changed, 1673 insertions, 0 deletions

diff --git a/board/st-ericsson/snowball/Makefile b/board/st-ericsson/snowball/Makefile
new file mode 100644
index 000000000..61382960b
--- /dev/null
+++ b/board/st-ericsson/snowball/Makefile
@@ -0,0 +1,51 @@
+#
+# Copyright (C) ST-Ericsson SA 2009
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+CFLAGS += -D__RELEASE -D__STN_8500
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= snowball.o
+
+#prcmu.o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+clean:
+	rm -f $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/st-ericsson/snowball/db8500_pins.h b/board/st-ericsson/snowball/db8500_pins.h
new file mode 100644
index 000000000..9cbaff648
--- /dev/null
+++ b/board/st-ericsson/snowball/db8500_pins.h
@@ -0,0 +1,745 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Code ported from Nomadik GPIO driver in ST-Ericsson Linux kernel code.
+ * The purpose is that GPIO config found in kernel should work by simply
+ * copy-paste it to U-boot.
+ *
+ * Ported to U-boot by:
+ * Copyright (C) 2010 Joakim Axelsson <joakim.axelsson AT stericsson.com>
+ **
+ * License terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ */
+
+#ifndef __DB8500_PINS_H
+#define __DB8500_PINS_H
+
+#include <db8500_pincfg.h>
+
+#define GPIO0_GPIO		PIN_CFG(0, GPIO)
+#define GPIO0_U0_CTSn		PIN_CFG(0, ALT_A)
+#define GPIO0_TRIG_OUT		PIN_CFG(0, ALT_B)
+#define GPIO0_IP_TDO		PIN_CFG(0, ALT_C)
+
+#define GPIO1_GPIO		PIN_CFG(1, GPIO)
+#define GPIO1_U0_RTSn		PIN_CFG(1, ALT_A)
+#define GPIO1_TRIG_IN		PIN_CFG(1, ALT_B)
+#define GPIO1_IP_TDI		PIN_CFG(1, ALT_C)
+
+#define GPIO2_GPIO		PIN_CFG(2, GPIO)
+#define GPIO2_U0_RXD		PIN_CFG(2, ALT_A)
+#define GPIO2_NONE		PIN_CFG(2, ALT_B)
+#define GPIO2_IP_TMS		PIN_CFG(2, ALT_C)
+
+#define GPIO3_GPIO		PIN_CFG(3, GPIO)
+#define GPIO3_U0_TXD		PIN_CFG(3, ALT_A)
+#define GPIO3_NONE		PIN_CFG(3, ALT_B)
+#define GPIO3_IP_TCK		PIN_CFG(3, ALT_C)
+
+#define GPIO4_GPIO		PIN_CFG(4, GPIO)
+#define GPIO4_U1_RXD		PIN_CFG(4, ALT_A)
+#define GPIO4_I2C4_SCL		PIN_CFG_PULL(4, ALT_B, UP)
+#define GPIO4_IP_TRSTn		PIN_CFG(4, ALT_C)
+
+#define GPIO5_GPIO		PIN_CFG(5, GPIO)
+#define GPIO5_U1_TXD		PIN_CFG(5, ALT_A)
+#define GPIO5_I2C4_SDA		PIN_CFG_PULL(5, ALT_B, UP)
+#define GPIO5_IP_GPIO6		PIN_CFG(5, ALT_C)
+
+#define GPIO6_GPIO		PIN_CFG(6, GPIO)
+#define GPIO6_U1_CTSn		PIN_CFG(6, ALT_A)
+#define GPIO6_I2C1_SCL		PIN_CFG_PULL(6, ALT_B, UP)
+#define GPIO6_IP_GPIO0		PIN_CFG(6, ALT_C)
+
+#define GPIO7_GPIO		PIN_CFG(7, GPIO)
+#define GPIO7_U1_RTSn		PIN_CFG(7, ALT_A)
+#define GPIO7_I2C1_SDA		PIN_CFG_PULL(7, ALT_B, UP)
+#define GPIO7_IP_GPIO1		PIN_CFG(7, ALT_C)
+
+#define GPIO8_GPIO		PIN_CFG(8, GPIO)
+#define GPIO8_IPI2C_SDA		PIN_CFG_PULL(8, ALT_A, UP)
+#define GPIO8_I2C2_SDA		PIN_CFG_PULL(8, ALT_B, UP)
+
+#define GPIO9_GPIO		PIN_CFG(9, GPIO)
+#define GPIO9_IPI2C_SCL		PIN_CFG_PULL(9, ALT_A, UP)
+#define GPIO9_I2C2_SCL		PIN_CFG_PULL(9, ALT_B, UP)
+
+#define GPIO10_GPIO		PIN_CFG(10, GPIO)
+#define GPIO10_IPI2C_SDA	PIN_CFG_PULL(10, ALT_A, UP)
+#define GPIO10_I2C2_SDA		PIN_CFG_PULL(10, ALT_B, UP)
+#define GPIO10_IP_GPIO3		PIN_CFG(10, ALT_C)
+
+#define GPIO11_GPIO		PIN_CFG(11, GPIO)
+#define GPIO11_IPI2C_SCL	PIN_CFG_PULL(11, ALT_A, UP)
+#define GPIO11_I2C2_SCL		PIN_CFG_PULL(11, ALT_B, UP)
+#define GPIO11_IP_GPIO2		PIN_CFG(11, ALT_C)
+
+#define GPIO12_GPIO		PIN_CFG(12, GPIO)
+#define GPIO12_MSP0_TXD		PIN_CFG(12, ALT_A)
+#define GPIO12_MSP0_RXD		PIN_CFG(12, ALT_B)
+
+#define GPIO13_GPIO		PIN_CFG(13, GPIO)
+#define GPIO13_MSP0_TFS		PIN_CFG(13, ALT_A)
+
+#define GPIO14_GPIO		PIN_CFG(14, GPIO)
+#define GPIO14_MSP0_TCK		PIN_CFG(14, ALT_A)
+
+#define GPIO15_GPIO		PIN_CFG(15, GPIO)
+#define GPIO15_MSP0_RXD		PIN_CFG(15, ALT_A)
+#define GPIO15_MSP0_TXD		PIN_CFG(15, ALT_B)
+
+#define GPIO16_GPIO		PIN_CFG(16, GPIO)
+#define GPIO16_MSP0_RFS		PIN_CFG(16, ALT_A)
+#define GPIO16_I2C1_SCL		PIN_CFG_PULL(16, ALT_B, UP)
+#define GPIO16_SLIM0_DAT	PIN_CFG(16, ALT_C)
+
+#define GPIO17_GPIO		PIN_CFG(17, GPIO)
+#define GPIO17_MSP0_RCK		PIN_CFG(17, ALT_A)
+#define GPIO17_I2C1_SDA		PIN_CFG_PULL(17, ALT_B, UP)
+#define GPIO17_SLIM0_CLK	PIN_CFG(17, ALT_C)
+
+#define GPIO18_GPIO		PIN_CFG(18, GPIO)
+#define GPIO18_MC0_CMDDIR	PIN_CFG(18, ALT_A)
+#define GPIO18_U2_RXD		PIN_CFG(18, ALT_B)
+#define GPIO18_MS_IEP		PIN_CFG(18, ALT_C)
+
+#define GPIO19_GPIO		PIN_CFG(19, GPIO)
+#define GPIO19_MC0_DAT0DIR	PIN_CFG(19, ALT_A)
+#define GPIO19_U2_TXD		PIN_CFG(19, ALT_B)
+#define GPIO19_MS_DAT0DIR	PIN_CFG(19, ALT_C)
+
+#define GPIO20_GPIO		PIN_CFG(20, GPIO)
+#define GPIO20_MC0_DAT2DIR	PIN_CFG(20, ALT_A)
+#define GPIO20_UARTMOD_TXD	PIN_CFG(20, ALT_B)
+#define GPIO20_IP_TRIGOUT	PIN_CFG(20, ALT_C)
+
+#define GPIO21_GPIO		PIN_CFG(21, GPIO)
+#define GPIO21_MC0_DAT31DIR	PIN_CFG(21, ALT_A)
+#define GPIO21_MSP0_SCK		PIN_CFG(21, ALT_B)
+#define GPIO21_MS_DAT31DIR	PIN_CFG(21, ALT_C)
+
+#define GPIO22_GPIO		PIN_CFG(22, GPIO)
+#define GPIO22_MC0_FBCLK	PIN_CFG(22, ALT_A)
+#define GPIO22_UARTMOD_RXD	PIN_CFG(22, ALT_B)
+#define GPIO22_MS_FBCLK		PIN_CFG(22, ALT_C)
+
+#define GPIO23_GPIO		PIN_CFG(23, GPIO)
+#define GPIO23_MC0_CLK		PIN_CFG(23, ALT_A)
+#define GPIO23_STMMOD_CLK	PIN_CFG(23, ALT_B)
+#define GPIO23_MS_CLK		PIN_CFG(23, ALT_C)
+
+#define GPIO24_GPIO		PIN_CFG(24, GPIO)
+#define GPIO24_MC0_CMD		PIN_CFG(24, ALT_A)
+#define GPIO24_UARTMOD_RXD	PIN_CFG(24, ALT_B)
+#define GPIO24_MS_BS		PIN_CFG(24, ALT_C)
+
+#define GPIO25_GPIO		PIN_CFG(25, GPIO)
+#define GPIO25_MC0_DAT0		PIN_CFG(25, ALT_A)
+#define GPIO25_STMMOD_DAT0	PIN_CFG(25, ALT_B)
+#define GPIO25_MS_DAT0		PIN_CFG(25, ALT_C)
+
+#define GPIO26_GPIO		PIN_CFG(26, GPIO)
+#define GPIO26_MC0_DAT1		PIN_CFG(26, ALT_A)
+#define GPIO26_STMMOD_DAT1	PIN_CFG(26, ALT_B)
+#define GPIO26_MS_DAT1		PIN_CFG(26, ALT_C)
+
+#define GPIO27_GPIO		PIN_CFG(27, GPIO)
+#define GPIO27_MC0_DAT2		PIN_CFG(27, ALT_A)
+#define GPIO27_STMMOD_DAT2	PIN_CFG(27, ALT_B)
+#define GPIO27_MS_DAT2		PIN_CFG(27, ALT_C)
+
+#define GPIO28_GPIO		PIN_CFG(28, GPIO)
+#define GPIO28_MC0_DAT3		PIN_CFG(28, ALT_A)
+#define GPIO28_STMMOD_DAT3	PIN_CFG(28, ALT_B)
+#define GPIO28_MS_DAT3		PIN_CFG(28, ALT_C)
+
+#define GPIO29_GPIO		PIN_CFG(29, GPIO)
+#define GPIO29_MC0_DAT4		PIN_CFG(29, ALT_A)
+#define GPIO29_SPI3_CLK		PIN_CFG(29, ALT_B)
+#define GPIO29_U2_RXD		PIN_CFG(29, ALT_C)
+
+#define GPIO30_GPIO		PIN_CFG(30, GPIO)
+#define GPIO30_MC0_DAT5		PIN_CFG(30, ALT_A)
+#define GPIO30_SPI3_RXD		PIN_CFG(30, ALT_B)
+#define GPIO30_U2_TXD		PIN_CFG(30, ALT_C)
+
+#define GPIO31_GPIO		PIN_CFG(31, GPIO)
+#define GPIO31_MC0_DAT6		PIN_CFG(31, ALT_A)
+#define GPIO31_SPI3_FRM		PIN_CFG(31, ALT_B)
+#define GPIO31_U2_CTSn		PIN_CFG(31, ALT_C)
+
+#define GPIO32_GPIO		PIN_CFG(32, GPIO)
+#define GPIO32_MC0_DAT7		PIN_CFG(32, ALT_A)
+#define GPIO32_SPI3_TXD		PIN_CFG(32, ALT_B)
+#define GPIO32_U2_RTSn		PIN_CFG(32, ALT_C)
+
+#define GPIO33_GPIO		PIN_CFG(33, GPIO)
+#define GPIO33_MSP1_TXD		PIN_CFG(33, ALT_A)
+#define GPIO33_MSP1_RXD		PIN_CFG(33, ALT_B)
+#define GPIO33_U0_DTRn		PIN_CFG(33, ALT_C)
+
+#define GPIO34_GPIO		PIN_CFG(34, GPIO)
+#define GPIO34_MSP1_TFS		PIN_CFG(34, ALT_A)
+#define GPIO34_NONE		PIN_CFG(34, ALT_B)
+#define GPIO34_U0_DCDn		PIN_CFG(34, ALT_C)
+
+#define GPIO35_GPIO		PIN_CFG(35, GPIO)
+#define GPIO35_MSP1_TCK		PIN_CFG(35, ALT_A)
+#define GPIO35_NONE		PIN_CFG(35, ALT_B)
+#define GPIO35_U0_DSRn		PIN_CFG(35, ALT_C)
+
+#define GPIO36_GPIO		PIN_CFG(36, GPIO)
+#define GPIO36_MSP1_RXD		PIN_CFG(36, ALT_A)
+#define GPIO36_MSP1_TXD		PIN_CFG(36, ALT_B)
+#define GPIO36_U0_RIn		PIN_CFG(36, ALT_C)
+
+#define GPIO64_GPIO		PIN_CFG(64, GPIO)
+#define GPIO64_LCDB_DE		PIN_CFG(64, ALT_A)
+#define GPIO64_KP_O1		PIN_CFG(64, ALT_B)
+#define GPIO64_IP_GPIO4		PIN_CFG(64, ALT_C)
+
+#define GPIO65_GPIO		PIN_CFG(65, GPIO)
+#define GPIO65_LCDB_HSO		PIN_CFG(65, ALT_A)
+#define GPIO65_KP_O0		PIN_CFG(65, ALT_B)
+#define GPIO65_IP_GPIO5		PIN_CFG(65, ALT_C)
+
+#define GPIO66_GPIO		PIN_CFG(66, GPIO)
+#define GPIO66_LCDB_VSO		PIN_CFG(66, ALT_A)
+#define GPIO66_KP_I1		PIN_CFG(66, ALT_B)
+#define GPIO66_IP_GPIO6		PIN_CFG(66, ALT_C)
+
+#define GPIO67_GPIO		PIN_CFG(67, GPIO)
+#define GPIO67_LCDB_CLK		PIN_CFG(67, ALT_A)
+#define GPIO67_KP_I0		PIN_CFG(67, ALT_B)
+#define GPIO67_IP_GPIO7		PIN_CFG(67, ALT_C)
+
+#define GPIO68_GPIO		PIN_CFG(68, GPIO)
+#define GPIO68_LCD_VSI0		PIN_CFG(68, ALT_A)
+#define GPIO68_KP_O7		PIN_CFG(68, ALT_B)
+#define GPIO68_SM_CLE		PIN_CFG(68, ALT_C)
+
+#define GPIO69_GPIO		PIN_CFG(69, GPIO)
+#define GPIO69_LCD_VSI1		PIN_CFG(69, ALT_A)
+#define GPIO69_KP_I7		PIN_CFG(69, ALT_B)
+#define GPIO69_SM_ALE		PIN_CFG(69, ALT_C)
+
+#define GPIO70_GPIO		PIN_CFG(70, GPIO)
+#define GPIO70_LCD_D0		PIN_CFG(70, ALT_A)
+#define GPIO70_KP_O5		PIN_CFG(70, ALT_B)
+#define GPIO70_STMAPE_CLK	PIN_CFG(70, ALT_C)
+
+#define GPIO71_GPIO		PIN_CFG(71, GPIO)
+#define GPIO71_LCD_D1		PIN_CFG(71, ALT_A)
+#define GPIO71_KP_O4		PIN_CFG(71, ALT_B)
+#define GPIO71_STMAPE_DAT3	PIN_CFG(71, ALT_C)
+
+#define GPIO72_GPIO		PIN_CFG(72, GPIO)
+#define GPIO72_LCD_D2		PIN_CFG(72, ALT_A)
+#define GPIO72_KP_O3		PIN_CFG(72, ALT_B)
+#define GPIO72_STMAPE_DAT2	PIN_CFG(72, ALT_C)
+
+#define GPIO73_GPIO		PIN_CFG(73, GPIO)
+#define GPIO73_LCD_D3		PIN_CFG(73, ALT_A)
+#define GPIO73_KP_O2		PIN_CFG(73, ALT_B)
+#define GPIO73_STMAPE_DAT1	PIN_CFG(73, ALT_C)
+
+#define GPIO74_GPIO		PIN_CFG(74, GPIO)
+#define GPIO74_LCD_D4		PIN_CFG(74, ALT_A)
+#define GPIO74_KP_I5		PIN_CFG(74, ALT_B)
+#define GPIO74_STMAPE_DAT0	PIN_CFG(74, ALT_C)
+
+#define GPIO75_GPIO		PIN_CFG(75, GPIO)
+#define GPIO75_LCD_D5		PIN_CFG(75, ALT_A)
+#define GPIO75_KP_I4		PIN_CFG(75, ALT_B)
+#define GPIO75_U2_RXD		PIN_CFG(75, ALT_C)
+
+#define GPIO76_GPIO		PIN_CFG(76, GPIO)
+#define GPIO76_LCD_D6		PIN_CFG(76, ALT_A)
+#define GPIO76_KP_I3		PIN_CFG(76, ALT_B)
+#define GPIO76_U2_TXD		PIN_CFG(76, ALT_C)
+
+#define GPIO77_GPIO		PIN_CFG(77, GPIO)
+#define GPIO77_LCD_D7		PIN_CFG(77, ALT_A)
+#define GPIO77_KP_I2		PIN_CFG(77, ALT_B)
+#define GPIO77_NONE		PIN_CFG(77, ALT_C)
+
+#define GPIO78_GPIO		PIN_CFG(78, GPIO)
+#define GPIO78_LCD_D8		PIN_CFG(78, ALT_A)
+#define GPIO78_KP_O6		PIN_CFG(78, ALT_B)
+#define GPIO78_IP_GPIO2		PIN_CFG(78, ALT_C)
+
+#define GPIO79_GPIO		PIN_CFG(79, GPIO)
+#define GPIO79_LCD_D9		PIN_CFG(79, ALT_A)
+#define GPIO79_KP_I6		PIN_CFG(79, ALT_B)
+#define GPIO79_IP_GPIO3		PIN_CFG(79, ALT_C)
+
+#define GPIO80_GPIO		PIN_CFG(80, GPIO)
+#define GPIO80_LCD_D10		PIN_CFG(80, ALT_A)
+#define GPIO80_KP_SKA0		PIN_CFG(80, ALT_B)
+#define GPIO80_IP_GPIO4		PIN_CFG(80, ALT_C)
+
+#define GPIO81_GPIO		PIN_CFG(81, GPIO)
+#define GPIO81_LCD_D11		PIN_CFG(81, ALT_A)
+#define GPIO81_KP_SKB0		PIN_CFG(81, ALT_B)
+#define GPIO81_IP_GPIO5		PIN_CFG(81, ALT_C)
+
+#define GPIO82_GPIO		PIN_CFG(82, GPIO)
+#define GPIO82_LCD_D12		PIN_CFG(82, ALT_A)
+#define GPIO82_KP_O5		PIN_CFG(82, ALT_B)
+
+#define GPIO83_GPIO		PIN_CFG(83, GPIO)
+#define GPIO83_LCD_D13		PIN_CFG(83, ALT_A)
+#define GPIO83_KP_O4		PIN_CFG(83, ALT_B)
+
+#define GPIO84_GPIO		PIN_CFG_PULL(84, GPIO, UP)
+#define GPIO84_LCD_D14		PIN_CFG(84, ALT_A)
+#define GPIO84_KP_I5		PIN_CFG(84, ALT_B)
+
+#define GPIO85_GPIO		PIN_CFG(85, GPIO)
+#define GPIO85_LCD_D15		PIN_CFG(85, ALT_A)
+#define GPIO85_KP_I4		PIN_CFG(85, ALT_B)
+
+#define GPIO86_GPIO		PIN_CFG(86, GPIO)
+#define GPIO86_LCD_D16		PIN_CFG(86, ALT_A)
+#define GPIO86_SM_ADQ0		PIN_CFG(86, ALT_B)
+#define GPIO86_MC5_DAT0		PIN_CFG(86, ALT_C)
+
+#define GPIO87_GPIO		PIN_CFG(87, GPIO)
+#define GPIO87_LCD_D17		PIN_CFG(87, ALT_A)
+#define GPIO87_SM_ADQ1		PIN_CFG(87, ALT_B)
+#define GPIO87_MC5_DAT1		PIN_CFG(87, ALT_C)
+
+#define GPIO88_GPIO		PIN_CFG(88, GPIO)
+#define GPIO88_LCD_D18		PIN_CFG(88, ALT_A)
+#define GPIO88_SM_ADQ2		PIN_CFG(88, ALT_B)
+#define GPIO88_MC5_DAT2		PIN_CFG(88, ALT_C)
+
+#define GPIO89_GPIO		PIN_CFG(89, GPIO)
+#define GPIO89_LCD_D19		PIN_CFG(89, ALT_A)
+#define GPIO89_SM_ADQ3		PIN_CFG(89, ALT_B)
+#define GPIO89_MC5_DAT3		PIN_CFG(89, ALT_C)
+
+#define GPIO90_GPIO		PIN_CFG(90, GPIO)
+#define GPIO90_LCD_D20		PIN_CFG(90, ALT_A)
+#define GPIO90_SM_ADQ4		PIN_CFG(90, ALT_B)
+#define GPIO90_MC5_CMD		PIN_CFG(90, ALT_C)
+
+#define GPIO91_GPIO		PIN_CFG(91, GPIO)
+#define GPIO91_LCD_D21		PIN_CFG(91, ALT_A)
+#define GPIO91_SM_ADQ5		PIN_CFG(91, ALT_B)
+#define GPIO91_MC5_FBCLK	PIN_CFG(91, ALT_C)
+
+#define GPIO92_GPIO		PIN_CFG(92, GPIO)
+#define GPIO92_LCD_D22		PIN_CFG(92, ALT_A)
+#define GPIO92_SM_ADQ6		PIN_CFG(92, ALT_B)
+#define GPIO92_MC5_CLK		PIN_CFG(92, ALT_C)
+
+#define GPIO93_GPIO		PIN_CFG(93, GPIO)
+#define GPIO93_LCD_D23		PIN_CFG(93, ALT_A)
+#define GPIO93_SM_ADQ7		PIN_CFG(93, ALT_B)
+#define GPIO93_MC5_DAT4		PIN_CFG(93, ALT_C)
+
+#define GPIO94_GPIO		PIN_CFG(94, GPIO)
+#define GPIO94_KP_O7		PIN_CFG(94, ALT_A)
+#define GPIO94_SM_ADVn		PIN_CFG(94, ALT_B)
+#define GPIO94_MC5_DAT5		PIN_CFG(94, ALT_C)
+
+#define GPIO95_GPIO		PIN_CFG(95, GPIO)
+#define GPIO95_KP_I7		PIN_CFG(95, ALT_A)
+#define GPIO95_SM_CS0n		PIN_CFG(95, ALT_B)
+#define GPIO95_SM_PS0n		PIN_CFG(95, ALT_C)
+
+#define GPIO96_GPIO		PIN_CFG(96, GPIO)
+#define GPIO96_KP_O6		PIN_CFG(96, ALT_A)
+#define GPIO96_SM_OEn		PIN_CFG(96, ALT_B)
+#define GPIO96_MC5_DAT6		PIN_CFG(96, ALT_C)
+
+#define GPIO97_GPIO		PIN_CFG(97, GPIO)
+#define GPIO97_KP_I6		PIN_CFG(97, ALT_A)
+#define GPIO97_SM_WEn		PIN_CFG(97, ALT_B)
+#define GPIO97_MC5_DAT7		PIN_CFG(97, ALT_C)
+
+#define GPIO128_GPIO		PIN_CFG(128, GPIO)
+#define GPIO128_MC2_CLK		PIN_CFG(128, ALT_A)
+#define GPIO128_SM_CKO		PIN_CFG(128, ALT_B)
+
+#define GPIO129_GPIO		PIN_CFG(129, GPIO)
+#define GPIO129_MC2_CMD		PIN_CFG(129, ALT_A)
+#define GPIO129_SM_WAIT0n	PIN_CFG(129, ALT_B)
+
+#define GPIO130_GPIO		PIN_CFG(130, GPIO)
+#define GPIO130_MC2_FBCLK	PIN_CFG(130, ALT_A)
+#define GPIO130_SM_FBCLK	PIN_CFG(130, ALT_B)
+#define GPIO130_MC2_RSTN	PIN_CFG(130, ALT_C)
+
+#define GPIO131_GPIO		PIN_CFG(131, GPIO)
+#define GPIO131_MC2_DAT0	PIN_CFG(131, ALT_A)
+#define GPIO131_SM_ADQ8		PIN_CFG(131, ALT_B)
+
+#define GPIO132_GPIO		PIN_CFG(132, GPIO)
+#define GPIO132_MC2_DAT1	PIN_CFG(132, ALT_A)
+#define GPIO132_SM_ADQ9		PIN_CFG(132, ALT_B)
+
+#define GPIO133_GPIO		PIN_CFG(133, GPIO)
+#define GPIO133_MC2_DAT2	PIN_CFG(133, ALT_A)
+#define GPIO133_SM_ADQ10	PIN_CFG(133, ALT_B)
+
+#define GPIO134_GPIO		PIN_CFG(134, GPIO)
+#define GPIO134_MC2_DAT3	PIN_CFG(134, ALT_A)
+#define GPIO134_SM_ADQ11	PIN_CFG(134, ALT_B)
+
+#define GPIO135_GPIO		PIN_CFG(135, GPIO)
+#define GPIO135_MC2_DAT4	PIN_CFG(135, ALT_A)
+#define GPIO135_SM_ADQ12	PIN_CFG(135, ALT_B)
+
+#define GPIO136_GPIO		PIN_CFG(136, GPIO)
+#define GPIO136_MC2_DAT5	PIN_CFG(136, ALT_A)
+#define GPIO136_SM_ADQ13	PIN_CFG(136, ALT_B)
+
+#define GPIO137_GPIO		PIN_CFG(137, GPIO)
+#define GPIO137_MC2_DAT6	PIN_CFG(137, ALT_A)
+#define GPIO137_SM_ADQ14	PIN_CFG(137, ALT_B)
+
+#define GPIO138_GPIO		PIN_CFG(138, GPIO)
+#define GPIO138_MC2_DAT7	PIN_CFG(138, ALT_A)
+#define GPIO138_SM_ADQ15	PIN_CFG(138, ALT_B)
+
+#define GPIO139_GPIO		PIN_CFG(139, GPIO)
+#define GPIO139_SSP1_RXD	PIN_CFG(139, ALT_A)
+#define GPIO139_SM_WAIT1n	PIN_CFG(139, ALT_B)
+#define GPIO139_KP_O8		PIN_CFG(139, ALT_C)
+
+#define GPIO140_GPIO		PIN_CFG(140, GPIO)
+#define GPIO140_SSP1_TXD	PIN_CFG(140, ALT_A)
+#define GPIO140_IP_GPIO7	PIN_CFG(140, ALT_B)
+#define GPIO140_KP_SKA1		PIN_CFG(140, ALT_C)
+
+#define GPIO141_GPIO		PIN_CFG(141, GPIO)
+#define GPIO141_SSP1_CLK	PIN_CFG(141, ALT_A)
+#define GPIO141_IP_GPIO2	PIN_CFG(141, ALT_B)
+#define GPIO141_KP_O9		PIN_CFG(141, ALT_C)
+
+#define GPIO142_GPIO		PIN_CFG(142, GPIO)
+#define GPIO142_SSP1_FRM	PIN_CFG(142, ALT_A)
+#define GPIO142_IP_GPIO3	PIN_CFG(142, ALT_B)
+#define GPIO142_KP_SKB1		PIN_CFG(142, ALT_C)
+
+#define GPIO143_GPIO		PIN_CFG(143, GPIO)
+#define GPIO143_SSP0_CLK	PIN_CFG(143, ALT_A)
+
+#define GPIO144_GPIO		PIN_CFG(144, GPIO)
+#define GPIO144_SSP0_FRM	PIN_CFG(144, ALT_A)
+
+#define GPIO145_GPIO		PIN_CFG(145, GPIO)
+#define GPIO145_SSP0_RXD	PIN_CFG(145, ALT_A)
+
+#define GPIO146_GPIO		PIN_CFG(146, GPIO)
+#define GPIO146_SSP0_TXD	PIN_CFG(146, ALT_A)
+
+#define GPIO147_GPIO		PIN_CFG(147, GPIO)
+#define GPIO147_I2C0_SCL	PIN_CFG_PULL(147, ALT_A, UP)
+
+#define GPIO148_GPIO		PIN_CFG(148, GPIO)
+#define GPIO148_I2C0_SDA	PIN_CFG_PULL(148, ALT_A, UP)
+
+#define GPIO149_GPIO		PIN_CFG(149, GPIO)
+#define GPIO149_IP_GPIO0	PIN_CFG(149, ALT_A)
+#define GPIO149_SM_CS1n		PIN_CFG(149, ALT_B)
+#define GPIO149_SM_PS1n		PIN_CFG(149, ALT_C)
+
+#define GPIO150_GPIO		PIN_CFG(150, GPIO)
+#define GPIO150_IP_GPIO1	PIN_CFG(150, ALT_A)
+#define GPIO150_LCDA_CLK	PIN_CFG(150, ALT_B)
+
+#define GPIO151_GPIO		PIN_CFG(151, GPIO)
+#define GPIO151_KP_SKA0		PIN_CFG(151, ALT_A)
+#define GPIO151_LCD_VSI0	PIN_CFG(151, ALT_B)
+#define GPIO151_KP_O8		PIN_CFG(151, ALT_C)
+
+#define GPIO152_GPIO		PIN_CFG(152, GPIO)
+#define GPIO152_KP_SKB0		PIN_CFG(152, ALT_A)
+#define GPIO152_LCD_VSI1	PIN_CFG(152, ALT_B)
+#define GPIO152_KP_O9		PIN_CFG(152, ALT_C)
+
+#define GPIO153_GPIO		PIN_CFG(153, GPIO)
+#define GPIO153_KP_I7		PIN_CFG_PULL(153, ALT_A, DOWN)
+#define GPIO153_LCD_D24		PIN_CFG(153, ALT_B)
+#define GPIO153_U2_RXD		PIN_CFG(153, ALT_C)
+
+#define GPIO154_GPIO		PIN_CFG(154, GPIO)
+#define GPIO154_KP_I6		PIN_CFG_PULL(154, ALT_A, DOWN)
+#define GPIO154_LCD_D25		PIN_CFG(154, ALT_B)
+#define GPIO154_U2_TXD		PIN_CFG(154, ALT_C)
+
+#define GPIO155_GPIO		PIN_CFG(155, GPIO)
+#define GPIO155_KP_I5		PIN_CFG_PULL(155, ALT_A, DOWN)
+#define GPIO155_LCD_D26		PIN_CFG(155, ALT_B)
+#define GPIO155_STMAPE_CLK	PIN_CFG(155, ALT_C)
+
+#define GPIO156_GPIO		PIN_CFG(156, GPIO)
+#define GPIO156_KP_I4		PIN_CFG_PULL(156, ALT_A, DOWN)
+#define GPIO156_LCD_D27		PIN_CFG(156, ALT_B)
+#define GPIO156_STMAPE_DAT3	PIN_CFG(156, ALT_C)
+
+#define GPIO157_GPIO		PIN_CFG(157, GPIO)
+#define GPIO157_KP_O7		PIN_CFG_PULL(157, ALT_A, UP)
+#define GPIO157_LCD_D28		PIN_CFG(157, ALT_B)
+#define GPIO157_STMAPE_DAT2	PIN_CFG(157, ALT_C)
+
+#define GPIO158_GPIO		PIN_CFG(158, GPIO)
+#define GPIO158_KP_O6		PIN_CFG_PULL(158, ALT_A, UP)
+#define GPIO158_LCD_D29		PIN_CFG(158, ALT_B)
+#define GPIO158_STMAPE_DAT1	PIN_CFG(158, ALT_C)
+
+#define GPIO159_GPIO		PIN_CFG(159, GPIO)
+#define GPIO159_KP_O5		PIN_CFG_PULL(159, ALT_A, UP)
+#define GPIO159_LCD_D30		PIN_CFG(159, ALT_B)
+#define GPIO159_STMAPE_DAT0	PIN_CFG(159, ALT_C)
+
+#define GPIO160_GPIO		PIN_CFG(160, GPIO)
+#define GPIO160_KP_O4		PIN_CFG_PULL(160, ALT_A, UP)
+#define GPIO160_LCD_D31		PIN_CFG(160, ALT_B)
+#define GPIO160_NONE		PIN_CFG(160, ALT_C)
+
+#define GPIO161_GPIO		PIN_CFG(161, GPIO)
+#define GPIO161_KP_I3		PIN_CFG_PULL(161, ALT_A, DOWN)
+#define GPIO161_LCD_D32		PIN_CFG(161, ALT_B)
+#define GPIO161_UARTMOD_RXD	PIN_CFG(161, ALT_C)
+
+#define GPIO162_GPIO		PIN_CFG(162, GPIO)
+#define GPIO162_KP_I2		PIN_CFG_PULL(162, ALT_A, DOWN)
+#define GPIO162_LCD_D33		PIN_CFG(162, ALT_B)
+#define GPIO162_UARTMOD_TXD	PIN_CFG(162, ALT_C)
+
+#define GPIO163_GPIO		PIN_CFG(163, GPIO)
+#define GPIO163_KP_I1		PIN_CFG_PULL(163, ALT_A, DOWN)
+#define GPIO163_LCD_D34		PIN_CFG(163, ALT_B)
+#define GPIO163_STMMOD_CLK	PIN_CFG(163, ALT_C)
+
+#define GPIO164_GPIO		PIN_CFG(164, GPIO)
+#define GPIO164_KP_I0		PIN_CFG_PULL(164, ALT_A, UP)
+#define GPIO164_LCD_D35		PIN_CFG(164, ALT_B)
+#define GPIO164_STMMOD_DAT3	PIN_CFG(164, ALT_C)
+
+#define GPIO165_GPIO		PIN_CFG(165, GPIO)
+#define GPIO165_KP_O3		PIN_CFG_PULL(165, ALT_A, UP)
+#define GPIO165_LCD_D36		PIN_CFG(165, ALT_B)
+#define GPIO165_STMMOD_DAT2	PIN_CFG(165, ALT_C)
+
+#define GPIO166_GPIO		PIN_CFG(166, GPIO)
+#define GPIO166_KP_O2		PIN_CFG_PULL(166, ALT_A, UP)
+#define GPIO166_LCD_D37		PIN_CFG(166, ALT_B)
+#define GPIO166_STMMOD_DAT1	PIN_CFG(166, ALT_C)
+
+#define GPIO167_GPIO		PIN_CFG(167, GPIO)
+#define GPIO167_KP_O1		PIN_CFG_PULL(167, ALT_A, UP)
+#define GPIO167_LCD_D38		PIN_CFG(167, ALT_B)
+#define GPIO167_STMMOD_DAT0	PIN_CFG(167, ALT_C)
+
+#define GPIO168_GPIO		PIN_CFG(168, GPIO)
+#define GPIO168_KP_O0		PIN_CFG_PULL(168, ALT_A, UP)
+#define GPIO168_LCD_D39		PIN_CFG(168, ALT_B)
+#define GPIO168_NONE		PIN_CFG(168, ALT_C)
+
+#define GPIO169_GPIO		PIN_CFG(169, GPIO)
+#define GPIO169_RF_PURn		PIN_CFG(169, ALT_A)
+#define GPIO169_LCDA_DE		PIN_CFG(169, ALT_B)
+#define GPIO169_USBSIM_PDC	PIN_CFG(169, ALT_C)
+
+#define GPIO170_GPIO		PIN_CFG(170, GPIO)
+#define GPIO170_MODEM_STATE	PIN_CFG(170, ALT_A)
+#define GPIO170_LCDA_VSO	PIN_CFG(170, ALT_B)
+#define GPIO170_KP_SKA1		PIN_CFG(170, ALT_C)
+
+#define GPIO171_GPIO		PIN_CFG(171, GPIO)
+#define GPIO171_MODEM_PWREN	PIN_CFG(171, ALT_A)
+#define GPIO171_LCDA_HSO	PIN_CFG(171, ALT_B)
+#define GPIO171_KP_SKB1		PIN_CFG(171, ALT_C)
+
+#define GPIO192_GPIO		PIN_CFG(192, GPIO)
+#define GPIO192_MSP2_SCK	PIN_CFG(192, ALT_A)
+
+#define GPIO193_GPIO		PIN_CFG(193, GPIO)
+#define GPIO193_MSP2_TXD	PIN_CFG(193, ALT_A)
+
+#define GPIO194_GPIO		PIN_CFG(194, GPIO)
+#define GPIO194_MSP2_TCK	PIN_CFG(194, ALT_A)
+
+#define GPIO195_GPIO		PIN_CFG(195, GPIO)
+#define GPIO195_MSP2_TFS	PIN_CFG(195, ALT_A)
+
+#define GPIO196_GPIO		PIN_CFG(196, GPIO)
+#define GPIO196_MSP2_RXD	PIN_CFG(196, ALT_A)
+
+#define GPIO197_GPIO		PIN_CFG(197, GPIO)
+#define GPIO197_MC4_DAT3	PIN_CFG(197, ALT_A)
+
+#define GPIO198_GPIO		PIN_CFG(198, GPIO)
+#define GPIO198_MC4_DAT2	PIN_CFG(198, ALT_A)
+
+#define GPIO199_GPIO		PIN_CFG(199, GPIO)
+#define GPIO199_MC4_DAT1	PIN_CFG(199, ALT_A)
+
+#define GPIO200_GPIO		PIN_CFG(200, GPIO)
+#define GPIO200_MC4_DAT0	PIN_CFG(200, ALT_A)
+
+#define GPIO201_GPIO		PIN_CFG(201, GPIO)
+#define GPIO201_MC4_CMD		PIN_CFG(201, ALT_A)
+
+#define GPIO202_GPIO		PIN_CFG(202, GPIO)
+#define GPIO202_MC4_FBCLK	PIN_CFG(202, ALT_A)
+#define GPIO202_PWL		PIN_CFG(202, ALT_B)
+#define GPIO202_MC4_RSTN	PIN_CFG(202, ALT_C)
+
+#define GPIO203_GPIO		PIN_CFG(203, GPIO)
+#define GPIO203_MC4_CLK		PIN_CFG(203, ALT_A)
+
+#define GPIO204_GPIO		PIN_CFG(204, GPIO)
+#define GPIO204_MC4_DAT7	PIN_CFG(204, ALT_A)
+
+#define GPIO205_GPIO		PIN_CFG(205, GPIO)
+#define GPIO205_MC4_DAT6	PIN_CFG(205, ALT_A)
+
+#define GPIO206_GPIO		PIN_CFG(206, GPIO)
+#define GPIO206_MC4_DAT5	PIN_CFG(206, ALT_A)
+
+#define GPIO207_GPIO		PIN_CFG(207, GPIO)
+#define GPIO207_MC4_DAT4	PIN_CFG(207, ALT_A)
+
+#define GPIO208_GPIO		PIN_CFG(208, GPIO)
+#define GPIO208_MC1_CLK		PIN_CFG(208, ALT_A)
+
+#define GPIO209_GPIO		PIN_CFG(209, GPIO)
+#define GPIO209_MC1_FBCLK	PIN_CFG(209, ALT_A)
+#define GPIO209_SPI1_CLK	PIN_CFG(209, ALT_B)
+
+#define GPIO210_GPIO		PIN_CFG(210, GPIO)
+#define GPIO210_MC1_CMD		PIN_CFG(210, ALT_A)
+
+#define GPIO211_GPIO		PIN_CFG(211, GPIO)
+#define GPIO211_MC1_DAT0	PIN_CFG(211, ALT_A)
+
+#define GPIO212_GPIO		PIN_CFG(212, GPIO)
+#define GPIO212_MC1_DAT1	PIN_CFG(212, ALT_A)
+#define GPIO212_SPI1_FRM	PIN_CFG(212, ALT_B)
+
+#define GPIO213_GPIO		PIN_CFG(213, GPIO)
+#define GPIO213_MC1_DAT2	PIN_CFG(213, ALT_A)
+#define GPIO213_SPI1_TXD	PIN_CFG(213, ALT_B)
+
+#define GPIO214_GPIO		PIN_CFG(214, GPIO)
+#define GPIO214_MC1_DAT3	PIN_CFG(214, ALT_A)
+#define GPIO214_SPI1_RXD	PIN_CFG(214, ALT_B)
+
+#define GPIO215_GPIO		PIN_CFG(215, GPIO)
+#define GPIO215_MC1_CMDDIR	PIN_CFG(215, ALT_A)
+#define GPIO215_MC3_DAT2DIR	PIN_CFG(215, ALT_B)
+#define GPIO215_CLKOUT1		PIN_CFG(215, ALT_C)
+
+#define GPIO216_GPIO		PIN_CFG(216, GPIO)
+#define GPIO216_MC1_DAT2DIR	PIN_CFG(216, ALT_A)
+#define GPIO216_MC3_CMDDIR	PIN_CFG(216, ALT_B)
+#define GPIO216_I2C3_SDA	PIN_CFG_PULL(216, ALT_C, UP)
+
+#define GPIO217_GPIO		PIN_CFG(217, GPIO)
+#define GPIO217_MC1_DAT0DIR	PIN_CFG(217, ALT_A)
+#define GPIO217_MC3_DAT31DIR	PIN_CFG(217, ALT_B)
+#define GPIO217_CLKOUT2		PIN_CFG(217, ALT_C)
+
+#define GPIO218_GPIO		PIN_CFG(218, GPIO)
+#define GPIO218_MC1_DAT31DIR	PIN_CFG(218, ALT_A)
+#define GPIO218_MC3_DAT0DIR	PIN_CFG(218, ALT_B)
+#define GPIO218_I2C3_SCL	PIN_CFG_PULL(218, ALT_C, UP)
+
+#define GPIO219_GPIO		PIN_CFG(219, GPIO)
+#define GPIO219_HSIR_FLA0	PIN_CFG(219, ALT_A)
+#define GPIO219_MC3_CLK		PIN_CFG(219, ALT_B)
+
+#define GPIO220_GPIO		PIN_CFG(220, GPIO)
+#define GPIO220_HSIR_DAT0	PIN_CFG(220, ALT_A)
+#define GPIO220_MC3_FBCLK	PIN_CFG(220, ALT_B)
+#define GPIO220_SPI0_CLK	PIN_CFG(220, ALT_C)
+
+#define GPIO221_GPIO		PIN_CFG(221, GPIO)
+#define GPIO221_HSIR_RDY0	PIN_CFG(221, ALT_A)
+#define GPIO221_MC3_CMD		PIN_CFG(221, ALT_B)
+
+#define GPIO222_GPIO		PIN_CFG(222, GPIO)
+#define GPIO222_HSIT_FLA0	PIN_CFG(222, ALT_A)
+#define GPIO222_MC3_DAT0	PIN_CFG(222, ALT_B)
+
+#define GPIO223_GPIO		PIN_CFG(223, GPIO)
+#define GPIO223_HSIT_DAT0	PIN_CFG(223, ALT_A)
+#define GPIO223_MC3_DAT1	PIN_CFG(223, ALT_B)
+#define GPIO223_SPI0_FRM	PIN_CFG(223, ALT_C)
+
+#define GPIO224_GPIO		PIN_CFG(224, GPIO)
+#define GPIO224_HSIT_RDY0	PIN_CFG(224, ALT_A)
+#define GPIO224_MC3_DAT2	PIN_CFG(224, ALT_B)
+#define GPIO224_SPI0_TXD	PIN_CFG(224, ALT_C)
+
+#define GPIO225_GPIO		PIN_CFG(225, GPIO)
+#define GPIO225_HSIT_CAWAKE0	PIN_CFG(225, ALT_A)
+#define GPIO225_MC3_DAT3	PIN_CFG(225, ALT_B)
+#define GPIO225_SPI0_RXD	PIN_CFG(225, ALT_C)
+
+#define GPIO226_GPIO		PIN_CFG(226, GPIO)
+#define GPIO226_HSIT_ACWAKE0	PIN_CFG(226, ALT_A)
+#define GPIO226_PWL		PIN_CFG(226, ALT_B)
+#define GPIO226_USBSIM_PDC	PIN_CFG(226, ALT_C)
+
+#define GPIO227_GPIO		PIN_CFG(227, GPIO)
+#define GPIO227_CLKOUT1		PIN_CFG(227, ALT_A)
+
+#define GPIO228_GPIO		PIN_CFG(228, GPIO)
+#define GPIO228_CLKOUT2		PIN_CFG(228, ALT_A)
+
+#define GPIO229_GPIO		PIN_CFG(229, GPIO)
+#define GPIO229_CLKOUT1		PIN_CFG(229, ALT_A)
+#define GPIO229_PWL		PIN_CFG(229, ALT_B)
+#define GPIO229_I2C3_SDA	PIN_CFG_PULL(229, ALT_C, UP)
+
+#define GPIO230_GPIO		PIN_CFG(230, GPIO)
+#define GPIO230_CLKOUT2		PIN_CFG(230, ALT_A)
+#define GPIO230_PWL		PIN_CFG(230, ALT_B)
+#define GPIO230_I2C3_SCL	PIN_CFG_PULL(230, ALT_C, UP)
+
+#define GPIO256_GPIO		PIN_CFG(256, GPIO)
+#define GPIO256_USB_NXT		PIN_CFG(256, ALT_A)
+
+#define GPIO257_GPIO		PIN_CFG(257, GPIO)
+#define GPIO257_USB_STP		PIN_CFG(257, ALT_A)
+
+#define GPIO258_GPIO		PIN_CFG(258, GPIO)
+#define GPIO258_USB_XCLK	PIN_CFG(258, ALT_A)
+#define GPIO258_NONE		PIN_CFG(258, ALT_B)
+#define GPIO258_DDR_TRIG	PIN_CFG(258, ALT_C)
+
+#define GPIO259_GPIO		PIN_CFG(259, GPIO)
+#define GPIO259_USB_DIR		PIN_CFG(259, ALT_A)
+
+#define GPIO260_GPIO		PIN_CFG(260, GPIO)
+#define GPIO260_USB_DAT7	PIN_CFG(260, ALT_A)
+
+#define GPIO261_GPIO		PIN_CFG(261, GPIO)
+#define GPIO261_USB_DAT6	PIN_CFG(261, ALT_A)
+
+#define GPIO262_GPIO		PIN_CFG(262, GPIO)
+#define GPIO262_USB_DAT5	PIN_CFG(262, ALT_A)
+
+#define GPIO263_GPIO		PIN_CFG(263, GPIO)
+#define GPIO263_USB_DAT4	PIN_CFG(263, ALT_A)
+
+#define GPIO264_GPIO		PIN_CFG(264, GPIO)
+#define GPIO264_USB_DAT3	PIN_CFG(264, ALT_A)
+
+#define GPIO265_GPIO		PIN_CFG(265, GPIO)
+#define GPIO265_USB_DAT2	PIN_CFG(265, ALT_A)
+
+#define GPIO266_GPIO		PIN_CFG(266, GPIO)
+#define GPIO266_USB_DAT1	PIN_CFG(266, ALT_A)
+
+#define GPIO267_GPIO		PIN_CFG(267, GPIO)
+#define GPIO267_USB_DAT0	PIN_CFG(267, ALT_A)
+
+#endif
diff --git a/board/st-ericsson/snowball/snowball.c b/board/st-ericsson/snowball/snowball.c
new file mode 100644
index 000000000..d95a95dec
--- /dev/null
+++ b/board/st-ericsson/snowball/snowball.c
@@ -0,0 +1,586 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <malloc.h>
+#include <i2c.h>
+#include <mmc.h>
+#include <asm/types.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/ab8500.h>
+#include <asm/arch/prcmu.h>
+#include <asm/arch/common.h>
+
+#include "../../../drivers/mmc/arm_pl180_mmci.h"
+
+#include <db8500_pincfg.h>
+
+#include "db8500_pins.h"
+
+#define NOMADIK_PER4_BASE	(0x80150000)
+#define NOMADIK_BACKUPRAM0_BASE (NOMADIK_PER4_BASE + 0x00000)
+#define NOMADIK_BACKUPRAM1_BASE (NOMADIK_PER4_BASE + 0x01000)
+
+
+/*
+ * Memory controller register
+ */
+#define DMC_BASE_ADDR			0x80156000
+#define DMC_CTL_97			(DMC_BASE_ADDR + 0x184)
+
+/*
+ * GPIO pin config common for MOP500/HREF boards
+ */
+pin_cfg_t gpio_cfg_common[] = {
+	/* I2C */
+	GPIO147_I2C0_SCL,
+	GPIO148_I2C0_SDA,
+	GPIO16_I2C1_SCL,
+	GPIO17_I2C1_SDA,
+	GPIO10_I2C2_SDA,
+	GPIO11_I2C2_SCL,
+	GPIO229_I2C3_SDA,
+	GPIO230_I2C3_SCL,
+
+	/* SSP0, to AB8500 */
+	GPIO143_SSP0_CLK,
+	GPIO144_SSP0_FRM,
+	GPIO145_SSP0_RXD | PIN_PULL_DOWN,
+	GPIO146_SSP0_TXD,
+
+	/* MMC0 (MicroSD card) */
+	GPIO18_MC0_CMDDIR	| PIN_OUTPUT_HIGH,
+	GPIO19_MC0_DAT0DIR	| PIN_OUTPUT_HIGH,
+	GPIO20_MC0_DAT2DIR	| PIN_OUTPUT_HIGH,
+	GPIO21_MC0_DAT31DIR	| PIN_OUTPUT_HIGH,
+	GPIO22_MC0_FBCLK	| PIN_INPUT_NOPULL,
+	GPIO23_MC0_CLK		| PIN_OUTPUT_LOW,
+	GPIO24_MC0_CMD		| PIN_INPUT_PULLUP,
+	GPIO25_MC0_DAT0		| PIN_INPUT_PULLUP,
+	GPIO26_MC0_DAT1		| PIN_INPUT_PULLUP,
+	GPIO27_MC0_DAT2		| PIN_INPUT_PULLUP,
+	GPIO28_MC0_DAT3		| PIN_INPUT_PULLUP,
+
+	/* MMC4 (On-board eMMC) */
+	GPIO197_MC4_DAT3	| PIN_INPUT_PULLUP,
+	GPIO198_MC4_DAT2	| PIN_INPUT_PULLUP,
+	GPIO199_MC4_DAT1	| PIN_INPUT_PULLUP,
+	GPIO200_MC4_DAT0	| PIN_INPUT_PULLUP,
+	GPIO201_MC4_CMD		| PIN_INPUT_PULLUP,
+	GPIO202_MC4_FBCLK	| PIN_INPUT_NOPULL,
+	GPIO203_MC4_CLK		| PIN_OUTPUT_LOW,
+	GPIO204_MC4_DAT7	| PIN_INPUT_PULLUP,
+	GPIO205_MC4_DAT6	| PIN_INPUT_PULLUP,
+	GPIO206_MC4_DAT5	| PIN_INPUT_PULLUP,
+	GPIO207_MC4_DAT4	| PIN_INPUT_PULLUP,
+
+	/* UART2, console */
+	GPIO29_U2_RXD	| PIN_INPUT_PULLUP,
+	GPIO30_U2_TXD	| PIN_OUTPUT_HIGH,
+	GPIO31_U2_CTSn	| PIN_INPUT_PULLUP,
+	GPIO32_U2_RTSn	| PIN_OUTPUT_HIGH,
+
+	/*
+	 * USB, pin 256-267 USB, Is probably already setup correctly from
+	 * BootROM/boot stages, but we don't trust that and set it up anyway
+	 */
+	GPIO256_USB_NXT,
+	GPIO257_USB_STP,
+	GPIO258_USB_XCLK,
+	GPIO259_USB_DIR,
+	GPIO260_USB_DAT7,
+	GPIO261_USB_DAT6,
+	GPIO262_USB_DAT5,
+	GPIO263_USB_DAT4,
+	GPIO264_USB_DAT3,
+	GPIO265_USB_DAT2,
+	GPIO266_USB_DAT1,
+	GPIO267_USB_DAT0,
+};
+
+pin_cfg_t gpio_cfg_snowball[] = {
+	/* MMC0 (MicroSD card) */
+	GPIO217_GPIO    | PIN_OUTPUT_HIGH,      /* MMC_EN */
+	GPIO218_GPIO    | PIN_INPUT_NOPULL,     /* MMC_CD */
+	GPIO228_GPIO    | PIN_OUTPUT_HIGH,      /* SD_SEL */
+
+	/* eMMC */
+	GPIO167_GPIO    | PIN_OUTPUT_HIGH,      /* RSTn_MLC */
+
+	/* LAN */ 
+	GPIO131_SM_ADQ8, 
+	GPIO132_SM_ADQ9, 
+	GPIO133_SM_ADQ10, 
+	GPIO134_SM_ADQ11, 
+	GPIO135_SM_ADQ12, 
+	GPIO136_SM_ADQ13, 
+	GPIO137_SM_ADQ14, 
+	GPIO138_SM_ADQ15,
+
+	/* RSTn_LAN */
+	GPIO141_GPIO	| PIN_OUTPUT_HIGH,
+};
+
+#define BOARD_ID_MOP500		0
+#define BOARD_ID_HREF		1
+#define BOARD_ID_HREFV60	2
+#define BOARD_ID_SNOWBALL      3
+int board_id;	/* set in probe_href() */
+
+DECLARE_GLOBAL_DATA_PTR;
+#if defined(CONFIG_SHOW_BOOT_PROGRESS)
+void show_boot_progress(int progress)
+{
+	printf("Boot reached stage %d\n", progress);
+}
+#endif
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+int board_init(void)
+{
+	/*
+	 * Setup board (bd) and board-info (bi).
+	 * bi_arch_number: Unique id for this board. It will passed in r1 to
+	 *    Linux startup code and is the machine_id.
+	 * bi_boot_params: Where this board expects params.
+	 */
+	gd->bd->bi_arch_number = MACH_TYPE_SNOWBALL;
+	gd->bd->bi_boot_params = 0x00000100;
+
+	/* Configure GPIO pins needed by U-boot */
+	db8500_gpio_config_pins(gpio_cfg_common, ARRAY_SIZE(gpio_cfg_common));
+
+	db8500_gpio_config_pins(gpio_cfg_snowball, ARRAY_SIZE(gpio_cfg_snowball));
+
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	uint32_t unused_cols_rows;
+	unsigned int nrows;
+	unsigned int ncols;
+
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	gd->ram_size = PHYS_SDRAM_SIZE_1;
+
+	/*
+	 * Assumption: 2 CS active, both CS have same layout.
+	 *             15 rows max, 11 cols max (controller spec).
+	 *             memory chip has 8 banks, I/O width 32 bit.
+	 * The correct way would be to read MR#8: I/O width and density,
+	 * but this requires locking against the PRCMU firmware.
+	 * Simplified approach:
+	 * Read number of unused rows and columns from mem controller.
+	 * size = nCS x 2^(rows+cols) x nbanks x buswidth_bytes
+	 */
+	unused_cols_rows = readl(DMC_CTL_97);
+	nrows = 15 - (unused_cols_rows & 0x07);
+	ncols = 11 - ((unused_cols_rows & 0x0700) >> 8);
+	gd->ram_size = gd->bd->bi_dram[0].size = 2 * (1 << (nrows + ncols)) * 8 * 4;
+
+	return 0;
+}
+
+/*
+ * probe_href - set board_id according to HREF version
+ *
+ * side-effect: configures additional GPIO pins if necessary.
+ */
+static void probe_href(void)
+{
+	gd->bd->bi_arch_number = MACH_TYPE_SNOWBALL;
+	board_id = BOARD_ID_SNOWBALL;
+}
+
+#define BATT_OK_SEL1_TH_F_MASK		0xF0
+#define BATT_OK_SEL1_TH_F_2V71		0x70
+/*
+ * board_early_access - for functionality that needs to run before
+ * board_late_init but after board_init and emmc init.
+ */
+int board_early_access(block_dev_desc_t *block_dev)
+{
+	int ret;
+	int battok_regval;
+
+	/* set board_id according to HREF version */
+	probe_href();
+
+	/*
+	 * In AB8500 rev2.0, the cut-off voltage threshold is set too low
+	 * and the AB will power-off when we start with a drained battery
+	 * and a charger connected when the backlight is turned on.
+	 * Here we will lower the cut-off voltage threshold before
+	 * power consumption goes up
+	 */
+	ret = ab8500_read(AB8500_SYS_CTRL2_BLOCK, AB8500_BATT_OK_REG);
+	if (ret < 0)
+		return -EINVAL;
+
+	battok_regval = ret;
+
+	/* Mask and set BattOkSel1ThF */
+	ret = ab8500_write(AB8500_SYS_CTRL2_BLOCK, AB8500_BATT_OK_REG,
+		(battok_regval & ~BATT_OK_SEL1_TH_F_MASK) |
+		BATT_OK_SEL1_TH_F_2V71);
+	if (ret < 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+#ifdef CONFIG_BOARD_LATE_INIT
+#ifdef CONFIG_MMC
+
+#define LDO_VAUX3_ENABLE_MASK		0x3
+#define LDO_VAUX3_ENABLE_VAL		0x1
+#define LDO_VAUX3_SEL_MASK		0xf
+#define LDO_VAUX3_SEL_2V9		0xd
+#define LDO_VAUX3_V2_SEL_MASK		0x7
+#define LDO_VAUX3_V2_SEL_2V91		0x7
+
+static int hrefplus_mmc_power_init(void)
+{
+	int ret;
+	int voltage_regval;
+	int enable_regval;
+	int ab8500_revision;
+
+	if (!cpu_is_u8500v11() && !cpu_is_u8500v2())
+		return 0;
+
+	/* Get AB8500 revision */
+	ret = ab8500_read(AB8500_MISC, AB8500_REV_REG);
+	if (ret < 0)
+		goto out;
+
+	ab8500_revision = ret;
+
+	/*
+	 * On v1.1 HREF boards (HREF+) and v2 boards, Vaux3 needs to be
+	 * enabled for the SD card to work.  This is done by enabling
+	 * the regulators in the AB8500 via PRCMU I2C transactions.
+	 *
+	 * This code is derived from the handling of AB8500_LDO_VAUX3 in
+	 * ab8500_ldo_enable() and ab8500_ldo_disable() in Linux.
+	 *
+	 * Turn off and delay is required to have it work across soft reboots.
+	 */
+
+	/* Turn off (read-modify-write) */
+	ret = ab8500_read(AB8500_REGU_CTRL2, AB8500_REGU_VRF1VAUX3_REGU_REG);
+	if (ret < 0)
+		goto out;
+
+	enable_regval = ret;
+
+	ret = ab8500_write(AB8500_REGU_CTRL2, AB8500_REGU_VRF1VAUX3_REGU_REG,
+		enable_regval & ~LDO_VAUX3_ENABLE_MASK);
+	if (ret < 0)
+		goto out;
+
+	/* Delay */
+	udelay(10 * 1000);
+
+	/* Set the voltage to 2.91 V or 2.9 V without overriding VRF1 value */
+	ret = ab8500_read(AB8500_REGU_CTRL2, AB8500_REGU_VRF1VAUX3_SEL_REG);
+	if (ret < 0)
+		goto out;
+
+	voltage_regval = ret;
+
+	if (ab8500_revision < 0x20) {
+		voltage_regval &= ~LDO_VAUX3_SEL_MASK;
+		voltage_regval |= LDO_VAUX3_SEL_2V9;
+	} else {
+		voltage_regval &= ~LDO_VAUX3_V2_SEL_MASK;
+		voltage_regval |= LDO_VAUX3_V2_SEL_2V91;
+	}
+
+	ret = ab8500_write(AB8500_REGU_CTRL2, AB8500_REGU_VRF1VAUX3_SEL_REG,
+		voltage_regval);
+	if (ret < 0)
+		goto out;
+
+	/* Turn on the supply */
+	enable_regval &= ~LDO_VAUX3_ENABLE_MASK;
+	enable_regval |= LDO_VAUX3_ENABLE_VAL;
+
+	ret = ab8500_write(AB8500_REGU_CTRL2, AB8500_REGU_VRF1VAUX3_REGU_REG,
+		enable_regval);
+
+out:
+	return ret;
+}
+#endif
+
+static int snowball_raise_ab8500_gpio26(void)
+{
+	int ret;
+
+	/* For snowball (aka "minikit") we need to raise AB8500's GPIO26 */
+	ret = ab8500_read(AB8500_MISC, AB8500_GPIO_DIR4_REG);
+	if (ret < 0) {
+		printf("error at %s:%i\n", __func__, __LINE__);
+		goto out;
+	}
+
+	ret |= 0x2;
+	ret = ab8500_write(AB8500_MISC, AB8500_GPIO_DIR4_REG, ret);
+	if (ret < 0) {
+		printf("error at %s:%i\n", __func__, __LINE__);
+		goto out;
+	}
+
+	ret = ab8500_read(AB8500_MISC, AB8500_GPIO_OUT4_REG);
+	if (ret < 0) {
+		printf("error at %s:%i\n", __func__, __LINE__);
+		goto out;
+	}
+
+	ret |= 0x2;
+	ret = ab8500_write(AB8500_MISC, AB8500_GPIO_OUT4_REG, ret);
+	if (ret < 0) {
+		printf("error at %s:%i\n", __func__, __LINE__);
+	}
+
+out:
+	return ret;
+}
+
+
+static int snowball_raise_ab8500_gpio16(void)
+{
+	int ret;
+
+	/* selection */
+	ret = ab8500_read(AB8500_MISC, AB8500_GPIO_SEL2_REG);
+	if (ret < 0) {
+		printf("error at %s:%i\n", __func__, __LINE__);
+		goto out;
+	}
+
+	ret |= 0x80;
+	ret = ab8500_write(AB8500_MISC, AB8500_GPIO_SEL2_REG, ret);
+	if (ret < 0) {
+		printf("error at %s:%i\n", __func__, __LINE__);
+		goto out;
+	}
+
+	/* direction */
+	ret = ab8500_read(AB8500_MISC, AB8500_GPIO_DIR2_REG);
+	if (ret < 0) {
+		printf("error at %s:%i\n", __func__, __LINE__);
+		goto out;
+	}
+
+	ret |= 0x80;
+	ret = ab8500_write(AB8500_MISC, AB8500_GPIO_DIR2_REG, ret);
+	if (ret < 0) {
+		printf("error at %s:%i\n", __func__, __LINE__);
+		goto out;
+	}
+
+	/* out */
+	ret = ab8500_read(AB8500_MISC, AB8500_GPIO_OUT2_REG);
+	if (ret < 0) {
+		printf("error at %s:%i\n", __func__, __LINE__);
+		goto out;
+	}
+
+	ret |= 0x80;
+	ret = ab8500_write(AB8500_MISC, AB8500_GPIO_OUT2_REG, ret);
+	if (ret < 0) {
+		printf("error at %s:%i\n", __func__, __LINE__);
+		goto out;
+	}
+
+out:
+	return ret;
+}
+
+/*
+ * called after all initialisation were done, but before the generic
+ * mmc_initialize().
+ */
+int board_late_init(void)
+{
+	/*
+	 * The board_id environment variable is needed for the Linux bootargs.
+	 */
+	if (board_id == 0)
+		setenv("board_id", "0");
+	else
+		setenv("board_id", "1");
+
+	if (u8500_is_snowball()) {
+		/* enable 3V3 for LAN controller */
+		if(snowball_raise_ab8500_gpio26() >= 0) {
+
+			/* Turn on FSMC device */
+			writel(0x1, 0x8000f000);
+			writel(0x1, 0x8000f008);
+
+			/* setup FSMC for LAN controler */
+			writel(0x305b, 0x80000000);
+			/*
+			 * the default is too slow
+			 * NOTE: below this some boards corrupt data in SRAM transfers
+			 */
+			writel(0x01010210, 0x80000004);
+		}
+
+		/* enable 3V6 for GBF chip */
+		snowball_raise_ab8500_gpio16();
+	}
+
+#ifdef CONFIG_MMC
+	hrefplus_mmc_power_init();
+
+	/*
+	 * config extended GPIO pins for level shifter and
+	 * SDMMC_ENABLE
+	 */
+	/* HREF V60 and later */
+	/* enable SDMMC */
+	db8500_gpio_set_output(GPIO169_GPIO, 1);
+#endif /* CONFIG_MMC */
+
+	return (0);
+}
+
+/*
+ * emmc_host_init - initialize the emmc controller.
+ * Configure GPIO settings, set initial clock and power for emmc slot.
+ * Initialize mmc struct and register with mmc framework.
+ */
+static int emmc_host_init(void)
+{
+	struct pl180_mmc_host *host;
+	int rc = 0;
+	struct mmc *dev;
+
+	host = malloc(sizeof(struct pl180_mmc_host));
+	if (!host)
+		return -ENOMEM;
+	memset(host, 0, sizeof(*host));
+
+	host->base = (struct sdi_registers *)CFG_EMMC_BASE;
+	host->pwr_init = SDI_PWR_OPD | SDI_PWR_PWRCTRL_ON;
+	host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT | SDI_CLKCR_CLKEN | SDI_CLKCR_HWFC_EN;
+	strcpy(host->name, "EMMC");
+	host->caps = MMC_MODE_4BIT | MMC_MODE_8BIT | MMC_MODE_HS | MMC_MODE_HS_52MHz;
+	host->voltages = VOLTAGE_WINDOW_MMC;
+	host->clock_min = ARM_MCLK / (2 + SDI_CLKCR_CLKDIV_INIT);
+	host->clock_max = ARM_MCLK / 2;
+	host->clock_in = ARM_MCLK;
+	host->version2 = 1;
+
+	rc = arm_pl180_mmci_init(host);
+
+	if (rc < 0)
+		return rc;
+
+	dev = find_mmc_device(0);
+	if (!dev)
+		return -ENODEV;
+
+	rc = mmc_init(dev);
+
+	return rc;
+}
+
+/*
+ * mmc_host_init - initialize the external mmc controller.
+ * Configure GPIO settings, set initial clock and power for mmc slot.
+ * Initialize mmc struct and register with mmc framework.
+ */
+static int mmc_host_init(void)
+{
+	struct pl180_mmc_host *host;
+	u32 sdi_u32;
+	int rc = 0;
+
+	host = malloc(sizeof(struct pl180_mmc_host));
+	if (!host)
+		return -ENOMEM;
+	memset(host, 0, sizeof(*host));
+
+	host->base = (struct sdi_registers *)CFG_MMC_BASE;
+	sdi_u32 = 0xBF;
+	writel(sdi_u32, &host->base->power);
+	host->pwr_init = 0xBF;
+	host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT | SDI_CLKCR_CLKEN | SDI_CLKCR_HWFC_EN;
+	strcpy(host->name, "MMC");
+	host->caps = 0; /* Some SD cards do not work in 4 bit mode! */
+	host->b_max = 0;
+	host->voltages = VOLTAGE_WINDOW_SD;
+	host->clock_min = ARM_MCLK / (2 + SDI_CLKCR_CLKDIV_INIT);
+	host->clock_max = ARM_MCLK / 2;
+	host->clock_in = ARM_MCLK;
+	host->version2 = 1;
+	rc = arm_pl180_mmci_init(host);
+
+	return rc;
+}
+
+/*
+ * board_mmc_init - initialize all the mmc/sd host controllers.
+ * Called by generic mmc framework.
+ */
+int board_mmc_init(bd_t *bis)
+{
+	int error;
+
+	(void) bis;
+
+	error = emmc_host_init();
+	if (error) {
+		printf("emmc_host_init() %d \n", error);
+		return -1;
+	}
+
+	/*
+	 * In a perfect world board_early_access shouldn't be here but we want
+	 * some functionality to be loaded as quickly as possible and putting it
+	 * here will get the shortest time to start that functionality. Time
+	 * saved by putting it here compared to later is somewhere between
+	 * 0.3-0.7s. That is enough to be able to justify putting it here.
+	 */
+
+	error = mmc_host_init();
+	if (error) {
+		printf("mmc_host_init() %d \n", error);
+		return -1;
+	}
+
+	return 0;
+}
+#endif /* CONFIG_BOARD_LATE_INIT */
diff --git a/include/configs/snowball.h b/include/configs/snowball.h
new file mode 100644
index 000000000..53791b4bc
--- /dev/null
+++ b/include/configs/snowball.h
@@ -0,0 +1,291 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2009
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+//#define  CONFIG_SKIP_LOWLEVEL_INIT 1
+#define  CONFIG_SNOWBALL 1
+//#define DEBUG 100
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_U8500
+#define CONFIG_L2_OFF
+
+#define CONFIG_SYS_MEMTEST_START	0x00000000
+#define CONFIG_SYS_MEMTEST_END	0x1FFFFFFF
+#define CONFIG_SYS_HZ		1000		/* must be 1000 */
+
+//#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_ARCH_CPU_INIT	1
+
+#define CONFIG_DISPLAY_CPUINFO	1
+#define CONFIG_BOARD_LATE_INIT		1
+
+
+/*-----------------------------------------------------------------------
+ * Size of environment and malloc() pool
+ */
+/*
+ * If you use U-Boot as crash kernel, make sure that it does not overwrite
+ * information saved by kexec during panic. Kexec expects the start
+ * address of the executable 32K above "crashkernel" address.
+ */
+/*
+ * Size of malloc() pool
+ */
+#ifdef CONFIG_BOOT_SRAM
+#define CONFIG_ENV_SIZE		(32*1024)
+#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 64*1024)
+#else
+#define CONFIG_ENV_SIZE		(128*1024)
+#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 256*1024)
+#endif
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* for initial data */
+
+//#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_CMD_ENV
+#define CONFIG_ENV_OFFSET              0x13F80000
+#define CONFIG_SYS_MMC_ENV_DEV          0              /* SLOT2: eMMC */
+
+/*
+ * PL011 Configuration
+ */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_SERIAL_RLCR
+#define CONFIG_PL011_SERIAL_FLUSH_ON_INIT
+
+/*
+ * U8500 UART registers base for 3 serial devices
+ */
+#define CFG_UART0_BASE		0x80120000
+#define CFG_UART1_BASE		0x80121000
+#define CFG_UART2_BASE		0x80007000
+#define CFG_SERIAL0		CFG_UART0_BASE
+#define CFG_SERIAL1		CFG_UART1_BASE
+#define CFG_SERIAL2		CFG_UART2_BASE
+#define CONFIG_PL011_CLOCK	38400000
+#define CONFIG_PL01x_PORTS	{ (void *)CFG_SERIAL0, (void *)CFG_SERIAL1, \
+				  (void *)CFG_SERIAL2 }
+#define CONFIG_CONS_INDEX	2
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Devices and file systems
+ */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_DOS_PARTITION
+
+/*
+ * Commands
+ */
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_CONSOLE
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+//#define CONFIG_CMD_EMMC
+#define CONFIG_CMD_SOURCE
+//#define CONFIG_CMD_I2C
+
+#ifndef CONFIG_BOOTDELAY
+#define CONFIG_BOOTDELAY	1
+#endif
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+
+#undef CONFIG_BOOTARGS
+#define CONFIG_BOOTCOMMAND \
+	"mmc rescan 0; mmc rescan 1; "					\
+		"if run loadbootscript; "				\
+		    "then run bootscript; "				\
+		"else "							\
+		    "if run mmcload; "					\
+		        "then run mmcboot; "				\
+		    "else "						\
+		        "if run emmcload; "				\
+		            "then run emmcboot; "			\
+			"else "						\
+			    "echo No media to boot from; "		\
+			"fi; "						\
+		    "fi; "						\
+		"fi; "
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"verify=n\0"							\
+	"loadaddr=0x00100000\0"						\
+	"console=ttyAMA2,115200n8\0"					\
+	"loadbootscript=fatload mmc 1:1 ${loadaddr} boot.scr\0"	\
+	"bootscript=echo Running bootscript "				\
+		"from mmc ...; source ${loadaddr}\0"			\
+	"memargs256=mem=96M@0 mem_modem=32M@96M mem=32M@128M "		\
+		"hwmem=22M@160M pmem_hwb=42M@182M mem_mali=32@224M\0"	\
+	"memargs512=mem=96M@0 mem_modem=32M@96M hwmem=32M@128M "	\
+		"mem=64M@160M mem_mali=32M@224M "			\
+		"pmem_hwb=128M@256M mem=128M@384M\0"			\
+	"memargs1024=mem=128M@0 mali.mali_mem=32M@128M "		\
+		"hwmem=168M@M160M mem=48M@328M "			\
+		"mem_issw=1M@383M mem=640M@384M\0"			\
+	"memargs=setenv bootargs ${bootargs} ${memargs1024}\0"		\
+	"emmcload=fatload mmc 0:2 ${loadaddr} /uImage\0"		\
+	"mmcload=fatload mmc 1:1 ${loadaddr} /uImage\0"		\
+	"commonargs=setenv bootargs console=${console} "		\
+		"ip=dhcp vmalloc=256M\0"				\
+	"emmcargs=setenv bootargs ${bootargs} "				\
+		"root=/dev/mmcblk0p3 "					\
+		"rootwait\0"						\
+	"addcons=setenv bootargs ${bootargs} "				\
+		"console=${console}\0"					\
+	"emmcboot=echo Booting from eMMC ...; "				\
+		"run commonargs emmcargs memargs; "			\
+		"bootm ${loadaddr}\0"					\
+	"mmcargs=setenv bootargs ${bootargs} "				\
+		"root=/dev/mmcblk1p2 "					\
+		"rootwait earlyprintk\0"				\
+	"mmcboot=echo Booting from external MMC ...; "			\
+		"run commonargs mmcargs memargs; "			\
+		"bootm ${loadaddr}\0"					\
+	"stdout=serial,usbtty\0"					\
+	"stdin=serial,usbtty\0"						\
+	"stderr=serial,usbtty\0"
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ */
+
+#define CONFIG_SYS_LONGHELP			/* undef to save memory     */
+#define CONFIG_SYS_PROMPT	"U8500 $ "	/* Monitor Command Prompt   */
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size  */
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE \
+					+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS	32	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */
+
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#define CONFIG_SYS_LOAD_ADDR		0x00100000 /* default load address */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1
+
+#define CONFIG_SYS_HUSH_PARSER		1
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_CMDLINE_EDITING
+
+#define CONFIG_SETUP_MEMORY_TAGS	2
+#define CONFIG_INITRD_TAG		1
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs  */
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ		(4*1024)	/* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ		(4*1024)	/* FIQ stack */
+#endif
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM_1			0x00000000	/* DDR-SDRAM Bank #1 */
+#define PHYS_SDRAM_SIZE_1		0x10000000	/* 256 MB */
+
+/*
+ * additions for new relocation code
+ */
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_SIZE	0x100000
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_SDRAM_BASE + \
+					 CONFIG_SYS_INIT_RAM_SIZE - \
+					 GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_GBL_DATA_OFFSET
+
+/* landing address before relocation */
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE            0x0
+#endif
+
+/*-----------------------------------------------------------------------
+ * MMC related configs
+ */
+#define CONFIG_ARM_PL180_MMCI
+#define MMC_BLOCK_SIZE			512
+#define CFG_EMMC_BASE			0x80114000
+#define CFG_MMC_BASE			0x80126000
+
+/*-----------------------------------------------------------------------
+ * USB related configs
+ */
+#define CONFIG_USB_BASE			0xA03E0000
+#define UDC_BASE			0xA03E0000
+#ifdef CONFIG_USB_TTY
+/* Allow console in serial and USB at the same time */
+#define CONFIG_CONSOLE_MUX		1
+//#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
+//#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
+#endif
+
+
+/*
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_NO_FLASH
+
+/*
+ * base register values for U8500
+ */
+#define CFG_PRCMU_BASE		0x80157000	/* Power, reset and clock */
+
+
+/*
+ * U8500 GPIO register base for 9 banks
+ */
+#define CONFIG_DB8500_GPIO
+#define CFG_GPIO_0_BASE			0x8012E000
+#define CFG_GPIO_1_BASE			0x8012E080
+#define CFG_GPIO_2_BASE			0x8000E000
+#define CFG_GPIO_3_BASE			0x8000E080
+#define CFG_GPIO_4_BASE			0x8000E100
+#define CFG_GPIO_5_BASE			0x8000E180
+#define CFG_GPIO_6_BASE			0x8011E000
+#define CFG_GPIO_7_BASE			0x8011E080
+#define CFG_GPIO_8_BASE			0xA03FE000
+
+#define CFG_FSMC_BASE		0x80000000	/* FSMC Controller */
+
+#endif	/* __CONFIG_H */